Hope
HOPE EASY BRAKE BLEED BLEEDING KI...
€40,41
€44,90
HOPE EASY BRAKE BLEED BLEED KIT WITH DOT 5.1 OIL 250 ML
Kit to bleed and keep Hope Tech 4 brakes clean. Thanks to the funnel it is no longer necessary to constantly fill the reservoir and the flow of brake fluid is controlled by a plunger.
HOPE EASY BRAKE BLEED BLEED KIT WITH DOT 5.1 OIL 250 ML MAIN FEATURES:
Compatible with Hope Tech4 brakes.
Dot 5.1 oil.
250 ml.
1 funnel.
1 piston.
1 ventilation cap specific for brakes with expansion tank seal.
1 connection tube with ventilation nipple.
ITEM CODE
HTTEBK4
Hope
HOPE PRO 4 FREEWHEEL BODY PINS KIT
€16,20
€18,00
HOPE PRO 4 FREEWHEEL BODY PAWL KIT
The HOPE PRO 4 freewheel body pawl kit allows you to replace these parts.
ITEM CODE
HUB535
Hope
ADATTATORE DISCHI HOPE L-POST 160...
€26,91
€29,90
Adattatore dischi Hope per pinza posteriore, consente il montaggio con dischi da 160mm a 180mm. Compatibile con forcella e telai con standard di montaggio Postmount. Materiale alluminio T6. Codice articolo HBMLN.
ADATTATORE DISCHI HOPE L-POST 160/180 CARATTERISTICHE PRINCIPALI:
Per pinza posteriore
Montaggio per dischi da 160mm a 180mm
Compatibile con forcella e telai con standard di montaggio Postmount
Materiale alluminio T6
2 viti incluse
Codice articolo HBMLN
Hope
STRAIGHT HOPE FITTING FOR BRAKING...
€9,90
€11,00
STRAIGHT HOPE FITTING FOR BRAKING SYSTEM
Straight fitting for Hope braking system.
ITEM CODE
HBSP163
Hope
HOPE FRONT CALIPER RX4+ FLAT MOUN...
€139,41
€154,90
FRONT CALIPER HOPE RX4+ FLAT MOUNT SRAM HYDRAULIC BRAKE
4-piston rear Flat-Mount brake caliper compatible with DOT 4.1 or DOT 5.1 brake fluid and perfect to be paired with Sram road brake levers.
NB: funziona solo con DOT 4.0 o DOT 5.1.
FRONT CALIPER HOPE RX4+ FLAT MOUNT SRAM HYDRAULIC BRAKE MAIN FEATURES:
The monobloc caliper increases stiffness and reduces the feeling of lever rubbing and disc friction.
Caliper made from a block of 2014 T6 aluminum.
4 pistons in phenolic resin.
Sold with two types of pads: blue for road use and red for cyclocross and off-road use.
Standard rear Flat-Mount, which allows mounting of a 140, 160 and 180 mm rotor depending on the adapter and type of mounting.
Standard direct Flat-Mount with 34 mm spacing.
COMPATIBLE WITH:
Sram Red eTap AXS
Sram Red
Sram Force eTap AXS
Sram Force
Sram Rival
Sram Apex
Sram S900
Hope
HOPE E-BIKE CRANK ARMS 165MM
€254,92
€299,90
HOPE E-BIKE CRANK ARMS 165MM
The HOPE E-BIKE CRANK ARMS 165 MM are designed to be mounted on e-mtb as they offer optimal performance on pedal-assist bikes. The cranksets mounted on e-mtb undergo greater stress than those mounted on traditional mtb and, for this reason, they are shorter and more resistant. The new hope e-bike crank arms are only 165mm long, are made of 7150 aluminum with a Q factor optimized for most of the frame plus electric motor combinations on the market.
HOPE E-BIKE CRANK ARMS 165MM MAIN FEATURES:
Length: 165mm.
Forged and machined crank arms made of 7150 series aluminum alloy.
Q factor optimized for compatibility with most frame / motor combinations.
Compatible with motor systems that use an ISIS interface for splined axle / crank arm.
Self-extracting system for easy installation and removal.
ITEM CODE:
HOCE.165.B (Color: Blue) / HOCE.165.N (Color: Black) / HOCE.165.O (Color: Orange) / HOCE.165.P (Color: Purple) / HOCE.165.R (Color: Red) / HOCE.165.S (Color: Silver)
Hope
HOPE S6903 2RS STAINLESS STEEL BE...
€12,14
€13,49
HOPE S6903 2RS INOX 17X30X7MM BEARING
The HOPE S17287 Inox bearing (17 x 30 x 7 mm) allows you to replace this part. It can be used as a spare part on various components, including Hope mozzi. The bearing is lubricated for vita and the seals non need to be removed.
HOPE S6903 2RS INOX 17X30X7MM BEARING MAIN FEATURES:
in stainless steel bearing.
Outer diameter: 17 mm.
Inner diameter: 30 mm.
Bearing width: 7 mm.
Seals on both sides.
Hope
HOPE Adapter (J) Post -IS (F183)
€26,91
€29,90
HOPE ADAPTER (J) POST -IS (F183)
HOPE 183 front postmount caliper spacing > HBMB Standard
Adapter for a postmount caliper and an international standard mount for a 183mm front rotor. and Pro4.
HOPE ADAPTER (J) POST -IS (F183) KEY FEATURES:
Mount: PM > IS.
Position: Front.
Hope
HOPE 31.8 BOLT CLAMP
€28,71
€31,90
HOPE 31.8 BOLT CLAMP
The Hope bolt clamp is the clamp for the sella with bolts made in aluminum 2014 CNC material. The clamp benefits from all the experience of the British marca in the production of high-quality components for MTB bikes.
MAIN FEATURES OF THE HOPE BOLT CLAMP:
Weight: 19 g.
Diameter: 31.8.
Material: aluminum 2014 CNC.
Hope
HOPE PISTON SEAL FOR X2 CALIPER
€2,70
€3,00
HOPE PISTON SEAL FOR X2 CALIPER
Original piston seal to renew the sealing of Hope X2 calipers. Brake compatibility and with DOT 5.1 oil.
ITEM CODE
HBSP236
Hope
CORONA HOPE SPIDERLESS
€76,41
€84,90
corona HOPE SPIDERLESS
The Hope Spiederless corona has been designed for those who want a lightweight single-chainring drivetrain, with high performance and durability. This version is suitable for cranksets and frames that comply with the new Boost standard. The corona is suitable for all disciplines XC, Enduro and All Mountain. An extremely robust corona in 7075-T6 aluminum, CNC machined with a carefully finished surface that guarantees maximum safety.
corona HOPE SPIDERLESS MAIN FEATURES:
For frames / cranksets with Boost standard;
7075-T6 CNC aluminum corona;
Direct mounting on the crank arms, without the need for a spider;
Tooth counts from 26 to 36 teeth;
Retainer structure that does not require the use of a bash;
Weight (manufacturer): 62 g (in 32 teeth).
Hope
HOPE LEVER FOR TELESCOPIC SEATPOS...
€80,91
€89,90
HOPE LEVER FOR TELESCOPIC SEATPOST SILVER
High-quality CNC-machined lever suitable for any cable-operated dropper seatpost. The lever rotates on ball bearings for an extremely smooth and precise action and is equipped with an adjustable lever with a 20% adjustment range: Increasing the lever results in a lighter action and a longer lever stroke, while decreasing the lever results in a faster action with a shorter lever stroke.
HOPE LEVER FOR TELESCOPIC SEATPOST SILVER MAIN FEATURES:
CNC machining.
Smooth operation on ball bearings.
Adjustable lever: Increasing the lever results in a lighter action and a longer lever stroke, decreasing the lever results in a faster action with a shorter lever stroke.
Adjustable reach.
funziona with most dropper seatposts.
Mounts directly on Hope brakes via a direct mount to the shifter for a look super clean finish.
Mounts with any sram Matchmaker or handlebar clamp.
Hope
Conversion kit HOPE 135mmx10 Pro2...
€26,01
€28,90
HOPE 135MMX10 PRO2 EVO CONVERSION KIT
Conversion kit for Hop Pro 2 rear hub with thru-axle.
Thru-axle standard: 10x135.
Hope
HOPE SPIDERLESS RX 40 BLACK CHAIN...
€79,11
€89,90
CORONA HOPE SPIDERLESS RX 40 BLACK
Corona direct-mount specifically designed for the Hope RX crankset. Designed to be compatible with 9/10/11 and 12-speed drivetrains, including SRAM T-Type and Shimano HG+.
CORONA HOPE SPIDERLESS RX 40 BLACK MAIN FEATURES:
Asymmetric tooth profile designed for cross-compatibility and functionality with different drivetrain systems.
Improved mud-shedding capability.
Improved chain retention.
Better performance with extreme chain angles on modern 1x drivetrains.
The tooth profile allows for greater chain wear before its functionality is compromised, extending its vita.
Spiderless rings have a new arm design with increased strength and stiffness.
Narrow/wide tooth profile to keep the chain in place.
Direct-mount fixing ring designed specifically for the RX crankset.
Optimized 45 mm chain line.
There is no need for a separate spider and bolts for a lighter setup.
Compatible with 10/11/12-speed drivetrains.
CNC machined from 7075-T6 aluminum.
Weight: 40T - 104g.
Hope
HOPE REAR HUB CONVERSION KIT PRO ...
€20,70
€23,00
HOPE REAR HUB pro 5 6B X12 CONVERSION KIT
Various conversion kits guarantee and allow the compatibility of Hope rear mozzi Pro 5 with different frames.
Conversion kit for Hope rear mozzi Pro 5 with 6-Bolt disc braking system.
Converts the 12x135 mm hub to 12x142 mm, the 12x150 mm hub to 12x157 mm, the 12x170 mm hub to 12x177 mm and the 12x190 mm hub to 12x197 mm.
ITEM CODE
HUB259
Hope
HOPE TECH4 BRAKE LEVER
€27,00
€30,00
HOPE TECH4 BRAKE LEVER
Replacement brake lever that can be mounted on either the right or left side.
Hope
HOPE evo 165 mm CRANK ARMS WITHOU...
€319,92
€399,90
HOPE EVO 165 MM NO SPIDER CRANK ARMS
The HOPE EVO 165 MM NO SPIDER CRANK ARMS, light and stiff, are easy to assemble/disassemble. They are made of forged and CNC-machined 7150 aluminum. Oversized 30mm axle in 7075 aluminum alloy and 165 mm length. They fit most XC, DH and FAT bikes.
MAIN FEATURES OF HOPE EVO 165 MM NO SPIDER CRANK ARMS:
Crank arms in forged and CNC-machined 7150 aluminum alloy.
Length: 165 mm.
Oversized 30mm axle in 7075 aluminum alloy.
Can be mounted on XC, DH and FAT bikes.
Hope
HOPE M6 LARGE COPPER WASHER
€3,15
€3,50
LARGE HOPE M6 COPPER WASHER
Kit of 10 large copper washers for Hope hydraulic braking systems.
ITEM CODE
HBSP026
Hope
HOPE CONVERSION KIT FOR HOPE PRO2...
€27,00
€30,00
HOPE CONVERSION KIT FOR HOPE PRO2 AND PRO2 EVO FRONT HUB 9 MM AXLE
Conversion kit for HOPE Pro 2 and Pro 2 Evo front hub for axle with 9x100 mm standard. Converted standard: 9x100 mm, 9x135 mm.
Hope
HOPE FLAT F20 REPLACEMENT PINS
€18,00
€20,00
HOPE FLAT F20 REPLACEMENT PINS
Hope F20 pedal pins, made of steel. Kit of 25 pcs.
ITEM CODE
PDSP003H
Hope
HOPE Enduro Sintered Brake Pads
€22,50
€25,00
HOPE Enduro Sintered Pads
The Hope Enduro Sintered pads have been designed to be used for Enduro disciplines because they last a long time, are very durable, and resistant to rain and water.
Hope
Motorcycle Pads HOPE Freeride/ Te...
€17,91
€19,90
HOPE Freeride/ Tech V2 St Motorcycle Pads
Pads for Hope Tech X2 disc brakes including the accessori.
Hope
HOPE IS 20 Adapter
€27,50
€30,56
HOPE IS 20 ADAPTER
International Standard to International Standard adapter with a 20 mm increase in disc diameter.
MAIN FEATURES OF HOPE IS 20 ADAPTER:
Mounting: IS > IS.
Position: Front, Rear.
Hope
HOPE TECH3 MATCHMAKER FOR SRAM LE...
€21,02
€23,36
HOPE TECH3 MATCHMAKER FOR LEFT SRAM SHIFTER
This matchmaker allows you to combine the left SRAM shifter on the same clamp as the brake lever. It is made of CNCX aluminum and mounts easily on the handlebar. Compatible exclusively with the right HOPE Tech 3 brake lever and with the SRAM XX, XX1, X0 and X9 shifter.
ITEM CODE
HBSP325L