Hope
HOPE 220 MM FLOATING DISC
€80,91
€89,90
HOPE 220 MM FLOATING ROTOR
The HOPE 220 MM FLOATING ROTOR has a braking surface made of stainless steel riveted to a central aluminum carrier, is extremely light and can expand or contract with temperature changes. Specific for road bikes.
MAIN FEATURES OF HOPE 220 MM FLOATING ROTOR:
Braking surface with rounded edge.
The rotor is machined with a radius on the inner and outer edge.
2-piece floating design.
Hope
HOPE FRONT HUB PRO 5 110 MM 28 HOLES
€125,91
€139,90
HOPE FRONT HUB PRO 5 110 MM 28 HOLES
The HOPE FRONT HUB PRO 5 110 MM 28 HOLES combines 30 years of experience with the needs of current and future cycling technologies. One of the main design goals of the Pro 5 hub was the reduction of aerodynamic resistance in the drive mechanism. To achieve this result, it was necessary to improve the sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system with new springs.Another important update to the rear hubs is the increase in engagement points (from 44 to 108) thanks to a 6-offset pawl hub design, in which 3 pawls are engaged at any one time. In this way it is possible to achieve the right balance between pick-up speed, load capacity, strength and durability, and in real terms you get a feeling of speed on the trail while keeping crank movement at an acceptable level without compromising hub free movement or its reliability. The outer shell has a new profile to increase stiffness without increasing weight and the new axle design allows the use of larger bearings in a better arrangement to suit the latest freehub standards, while at the same time increasing load capacity.
HOPE FRONT HUB PRO 5 15X110 MM 28 HOLES MAIN FEATURES:
Stainless steel sealed cartridge bearings.
Hub shell machined from forged aluminum billet.
Standard 6-bolt disc mount.
Larger spoke flange to allow the construction of stiffer wheels.
Unbeatable reliability.
Torq end cap.
The hub flanges are moved 5 MM outwards compared to the standard 100 m front hub to increase wheel stiffness.
28 holes.
Machined from 2014 T6 forged aluminum billet.
Weight (approximate): 188 g.
NB: in the order notes, indicate whether you want to purchase the 15 or 20 MM version.
Hope
HOPE Tech 3 V4 Pads (Sintered)
€25,11
€27,90
HOPE TECH 3 V4 PADS (SINTERED)
The original pads for Hope Tech 3 V4 disc brakes offer exceptional braking performance in the most extreme conditions, even on wet or slippery terrain.
They are made with a high-density material and a high coefficient of friction that makes the Hope Tech brake kit absolutely infallible.
HOPE TECH 3 V4 PADS (SINTERED)
Compatibility: For Hope Tech 3 V4 brakes.
Option: Sintered.
COD. ART. 5055168050058
Hope
HOPE FRONT HUB PRO 5 110 mm 32 HOLES
€125,91
€139,90
HOPE FRONT HUB PRO 5 110 MM 32 HOLES
The HOPE FRONT HUB PRO 5 110 MM 32 HOLES combines 30 years of experience with the demands of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was the reduction of rolling resistance in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system, with new springs.Another important upgrade of the rear mozzi consists in increasing the points of engagement (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in real terms you get a feeling of speed on the trail while keeping crank movement at an acceptable level without compromising the hub’s freedom of movement or its reliability. The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows the installation of larger bearings in a better arrangement to fit the latest freehub standards, while at the same time increasing load capacity.
HOPE FRONT HUB PRO 5 110 MM 32 HOLES MAIN FEATURES:
Sealed stainless steel cartridge bearings.
Hub shell machined from forged solid aluminum.
Standard 6-bolt disc mounting.
Larger spoke flange to allow the building of stiffer wheels.
Unbeatable reliability.
Torq end cap.
The hub flanges are moved 5 mm further out compared to the standard 100 m front hub to increase wheel stiffness.
32 holes.
Machined from forged 2014 T6 aluminum.
Weight (approximate): 188 g.
NB: specify in the order notes whether 15 or 20 mm
Hope
HOPE TECH3 BRAKE LEVER CLAMP
€18,59
€20,65
CLAMP FOR HOPE TECH3 BRAKE LEVER
The CLAMP FOR HOPE TECH3 BRAKE LEVER allows you to securely fasten the Tech3 lever to your MTB handlebar.
CLAMP FOR HOPE TECH3 BRAKE LEVER KEY FEATURES:
Compatible with Hope Tech3 brake levers.
in aluminum.
ITEM CODE
HBSP316B (Color: Blue) / HBSP316N (Color: Black) / HBSP316O (Color: Orange) / HBSP316P (Color: Viola) / HBSP316R (Color: Red) / HBSP316S (Color: Argento)
Hope
HOPE Adapter (C) Post to Post (F-...
€19,71
€21,90
HOPE ADAPTER (C) POST TO POST (F-203/R-203)
HOPE brake adapter (C) Postmount to postmount (F-203/R-203)
Hope
DISC HOPE FLOATING 6 HOLES 203MM
€80,90
€89,89
The HOPE FLOATING DISC 203 represents excellence in the world of disc brake rotors. Made with high-quality materials, this floating disc is designed to offer superior performance, durability, and exceptional heat dissipation.
DISC HOPE FLOATING 6 HOLES 203MM MAIN FEATURES:
Size: 203 mm
Material: Stainless steel with an aluminum alloy center
Compatibility: Compatible with most disc brake systems
Floating design: Reduces the risk of thermal deformation
Mounting: Easy installation with hardware included
Choose the HOPE Floating Disc 203 to improve your performance in any condition and enjoy powerful and reliable braking.
Hope
HOPE EVO GR4 BRAIDED REAR BRAKE
€314,91
€349,90
The super-smooth lever action and high-quality construction make controlling that power feel natural. The benchmark brake for use on gravity bikes and e-bikes. The Hope Evo GR4 brake set represents the benchmark for those seeking maximum power and absolute control in gravity and e-MTB disciplines. Designed and manufactured in England by Hope Technology, this line of brakes combines robust performance, refined modulation, and the brand's signature craftsmanship.
HOPE EVO GR4 BRAIDED REAR BRAKE MAIN FEATURES:
Enlarged lever hook for greater control and safety during aggressive riding.
The new dimpled design improves comfort during hard braking and maintains grip in all weather conditions.
The new cam design reduces lever free travel while maintaining sensitivity and modulation in the braking zone.
Main pin with roller bearing.
2 guide bushings keep the piston perfectly smooth and linear.
The bleed port added to the master cylinder body allows bleeding without removing the cover.
Monoblock caliper design for best stiffness-to-weight ratio.
Larger pistons increase the brake ratio for more power.
The increased rigidity of the caliper helps improve lever sensitivity and increase power.
Increased adjustment range for better compatibility with third-party hubs and framesets.
The new hole cap design reduces the overall width of the caliper for easier packing and better frame compatibility.
The GR4s are not compatible with ventilated rotors.
Hope
HOPE EVO GR4 BRAIDED BRAKE FRONT
from €314,91
€349,90
The super-smooth lever action and high-quality construction make controlling that power feel natural. The benchmark brake for gravity bikes and e-bikes. The Hope Evo GR4 brake set represents the benchmark for those seeking maximum power and absolute control in gravity and e-MTB disciplines. Designed and manufactured in England by Hope Technology, this line of brakes combines robust performance, refined modulation, and the brand's signature craftsmanship.
HOPE EVO GR4 BRAIDED BRAKE FRONT MAIN FEATURES:
Enlarged lever hook for greater control and safety during aggressive riding.
The new dimpled design improves comfort during hard braking and maintains grip in all weather conditions.
The new cam design reduces lever free travel while maintaining sensitivity and modulation in the braking zone.
Main pin with roller bearing.
2 guide bushings keep the piston perfectly smooth and linear.
The bleed port added to the master cylinder body allows bleeding without removing the cover.
Monoblock caliper design for best stiffness-to-weight ratio.
Larger pistons increase the brake ratio for more power.
The increased rigidity of the caliper helps improve lever sensitivity and increase power.
Increased adjustment range for better compatibility with third-party hubs and framesets.
The new hole cap design reduces the overall width of the caliper for easier packing and better frame compatibility.
The GR4s are not compatible with ventilated rotors.
Hope
HOPE REAR HUB PRO 5 148 MM BOOST ...
€255,99
€319,99
HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE
The HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE combines 30 years of experience with the needs of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was reducing drag in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system with new springs.Another important update to the rear hubs is the increase in engagement points (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any one time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in practical terms you get a fast feel on the trail while keeping crank movement at an acceptable level without compromising hub free movement or its reliability.The hub is sold with a freehub body specifically designed for e-bikes: all six pawls engage simultaneously, which both reduces lag and increases load capacity and durability. The freehub is made entirely of stainless steel for better stability and wear resistance.The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows for larger bearings to be mounted in a better arrangement to fit the latest freehub standards while at the same time increasing load capacity.
HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE MAIN FEATURES:
Hub shell machined from forged 2014 T6 Aluminium.
6-bolt disc brake system.
Stainless steel sealed cartridge bearings.
Labyrinth seal.
NB: in the order notes indicate which freehub body you want to mount between shimano microspline, shimano hg steel and sram xd.
Hope
HOPE C2/O2 Pads
€20,61
€22,90
HOPE C2/O2 PADS
The C2/02 pads from Hope are made of Standard composite and offer a perfect balance between power, noise and durability. The pads are suitable for any type of situation and for amateur bikers.
MAIN FEATURES OF HOPE C2/O2 PADS:
No noise.
Improved feel, progressiveness and braking power.
Minimization of vibrations in the cycle part.
Reduced wear of brake discs.
Resistance to high temperatures.
Increased durability.
Hope
HOPE PRO2 AND PRO2 EVO FRONT HUB ...
€26,01
€28,90
HOPE PRO2 AND PRO2 EVO FRONT HUB CONVERSION KIT 10MM THRU AXLE
The Hope conversion kits convert your Hope mozzi to the corresponding mounting standards, thus allowing versatile use of the mozzi.Unlike the Pro 2 hub, on the Pro 2 Evo rear hub it is no longer necessary to change the axle, so in this case as well it is only necessary to work with the end caps.
HOPE PRO2 AND PRO2 EVO FRONT HUB CONVERSION KIT 10MM THRU AXLE KEY FEATURES:
Convertible to: front 9 x 100 mm ThruBolt thru axle
base model: front 9 x 100 mm quick release, 12 x 100 mm thru axle, 15 x 100 mm thru axle, 20 x 110 mm thru axle
Compatibility: Pro 2 / Pro 2 Evo
ITEM CODE
HUB443
Hope
HOPE Display Mount for BOSCH KIOX
€79,91
€99,89
HOPE DISPLAY MOUNT FOR BOSCH KIOX
BOSCH Kiox screen mount machined in aluminum for better protection.
HOPE DISPLAY MOUNT FOR BOSCH KIOX KEY FEATURES:
Attaches to the stem.
Completely made of aluminum.
100% CNC machined.
Protects the Bosch Kiox display.
Hope
HOPE X2 BRAKE COVER
€16,33
€18,14
HOPE X2 BRAKE COVER
Hope Race X2 cover for the brake caliper piston. Ideal as spare parts or individual color accents. Material: Aluminum.
Hope
HOPE UNION RC RACE PEDALS
€186,92
€219,91
HOPE UNION RC RACE PEDALS
The HOPE UNION RC PEDALS are designed for cross-country and feature a dual mechanism that allows easy pedal entry, secure cleat retention, and a positive, consistent release.The dual-clip mechanism means the front clip moves on pedal entry, reduces the effort required to engage the pedal, flattens the shoe entry angle, and provides a wider cleat entry angle, allowing the front of the shoe sole to get closer to the pedal body to increase stability. Cleat release is guided by fixed pins for easier and more consistent disengagement.Hope’s mechanism uses a specific cleat that is not compatible with all other systems. The pedals are sold with 2 cleat options: cleat number 4 offers 4° of float and has a 12° release angle, while cleat number offers 5° of float and has a release angle of 13 and has greater release effort for aggressive riding. Both cleats also allow 2 mm of lateral float (side to side).The pedal body is CNC machined from billet and is designed to maximize contact between shoe/cleat and pedal body for greater stability and power transfer.
HOPE UNION RC RACE PEDALS KEY FEATURES:
Dual mechanism designed for easy pedal entry, secure cleat retention, and positive, consistent release.
Double-sided.
Titanium axle.
CNC-machined pedal body.
Stainless steel clips and cleats.
Sold with two cleat options.
The pedals run on three cartridge bearings and a maintenance-free IGUS bushing for smooth long-term durability.
Fully serviceable and rebuildable.
Q factor - 55mm.
Hope
RIM HOPE FORTUS 30 29 32H TUBELES...
€134,91
€149,90
HOPE FORTUS 30 29 32H TUBELESS READY RIM
The trend toward wider tires continues to increase and ever lower tire pressures pose new challenges for rims. Sidewall protection is also an issue on narrow rims with wide tires. Hope is addressing this need with the new Fortus rims. The welded rims are made of 6061 aluminum. The Fortus 30 has greater strength thanks to two additional hollow chambers. The spoke holes are equipped with eyelets for easy wheel building and improved durability. During the optimization of the rim profile, of course, the tubeless capability was also preserved. The installation of tubeless tires is as easy as with all other HOPE rims.
HOPE FORTUS 30 29 32H TUBELESS READY RIM KEY FEATURES:
Intended use: downhill, freeride, enduro, trail, all-mountain
Material: 6061 aluminum
Rim type: clincher (clincher and folding tire)
Brake type: solo for disc brake
ETRTO: 622x30c
Internal width: 30 mm
External width: 35.2 mm
Rim height: 23 mm
Number of holes: 32
Tubeless ready
Recommended tire width: 61–71 mm
Weight: 720 g
Hope
HOPE V4 203 VENTILATED ROTOR
€166,41
€184,90
HOPE V4 203 VENTILATED ROTOR
The V4 ventilated rotor by Hope has been specifically designed for use with the Hope Tech Eva V4 brake, as it is slightly wider than standard Hope floating brake discs. The V4 brake rotor significantly reduces the disc temperature by up to 15%, ensuring perfect braking performance, also thanks to the cooling fins that expel water and moisture, keeping the braking surface dry.
HOPE V4 203 VENTILATED ROTOR MAIN FEATURES:
203 mm Brake Rotor
Machined with CNC Machines and Laser Cut
All Parts are Made and Assembled by Hand
Compatible only with V4 Brake Calipers
Weight 283g
Hope
HOPE 2RS STAINLESS STEEL BEARING ...
€10,78
€11,98
HOPE 2RS STAINLESS STEEL BEARING (17X26X5MM)
Replacement Hope 2RS Inox bearing (17 x 26 x 5 mm).
Dimensions: 17 x 26 x 5 mm.
Stainless steel rings.
Ball/needle materials: stainless steel.
Radial bearing.
Use: wheels.
ITEM CODE
S6803
Hope
HOPE PHENOLIC BRAKE CALIPER PISTON
€8,60
€9,55
HOPE PHENOLIC BRAKE CALIPER PISTON
Piston for Hope disc brake calipers in phenolic resin that quickly dissipates heat and further lightens the brake by a few grams.
ITEM CODE
HBSP432
Hope
HOPE HYDRAULIC CONNECTOR 5 MM
€6,29
€6,99
HOPE 5 mm HYDRAULIC CONNECTOR
Stainless steel union nut for use with Hope brake hoses with a diameter of 5 mm. Compatible with 5 mm steel or plastic flexible hoses.
ITEM CODE
HBSP158
Hope
HOPE E-BIKE 155MM CRANK ARMS
€254,92
€299,90
HOPE E-BIKE 155MM CRANK ARMS
The HOPE E-BIKE 155MM CRANK ARMS are perfect for mounting on E-MTB for Enduro, XC and All Mountain. The model is made of 7150 aluminum CNC-machined and is robust and versatile. The spiderless crankset makes these crank arms compatible with the corona specifica per E-bike. The innovative expansion system between the crank arms and the axle ensures excellent retention, makes disassembly easier, and increases the product’s longevity.
HOPE E-BIKE 155MM CRANK ARMS KEY FEATURES:
Crank arms for E-MTB for XC, Enduro and All Mountain.
Versatility.
The expansion system improves resistance against wear and deformation of the product.
Maximum terrain control.
Self-extracting system for easier installation/removal.
Interasse corona: Direct Mount.
Crank arm length: 155 mm.
Bottom bracket non included.
Axle type: Isis.
Q factor optimized for compatibility with most frame/motor combinations.
Weight: 472 g.
Hope
HOPE QUICK RELEASE CLAMP 34.9
€34,10
€37,89
HOPE QUICK RELEASE 34.9 SEAT CLAMP
The screw collar from Hope is the quick release sella clamp made of 2014 CNC aluminum material. The collar benefits from all the experience of the British marca in the production of high-quality components for MTB bikes. The adjustment of the sella is made simple and quick thanks to the presence of a quick release lever. The tight-fitting locking nut ensures easy adjustment of the clamping force. The rubber-coated quick release lever, machined in brass, provides optimal clamping force.
HOPE QUICK RELEASE 34.9 SEAT CLAMP - TECHNICAL SPECIFICATIONS
Weight: 52g
Diameter: 34.9
Material: 2014 CNC aluminum
Hope
HOPE CAP ORING M4 LARGE
€1,41
€1,57
HOPE CAP M4 LARGE O-RING
Replacement O-ring for Hope brake calipers code HBSP140 compatible with V4, E4 models. Compatible with Hope E4, V4 brake models.
ITEM CODE
HBSP140
Hope
HOPE FREEHUB BODY FOR PRO 4 HG
€86,40
€120,00
HOPE FREEHUB BODY FOR PRO 4 HG
Aluminium freehub body with 4 pawls and seal. For Hope Pro 4 rear hubs. Compatible only with special Hope cassettes.
The Hope Pro 4 – Hope Aluminium – X12 hub is a genuine replacement part designed to restore precise and reliable engagement on Hope Pro 4 rear hubs.
Made from lightweight aluminium and finished to Hope's exacting standards, this hub offers quick engagement, durability, and smooth performance. Designed for X12 axle configurations, it is ideal for replacing worn or damaged hubs or keeping a spare hub ready in the workshop.
KEY FEATURES:
Genuine Hope Pro 4 replacement freehub assembly
Lightweight aluminium construction
Designed for X12 rear hub configurations
Ensures quick and reliable engagement
Precision-engineered for durability and smooth operation
ARTICLE CODE
HUB538