Amflow

Adapter for handlebar mount × 1 Angle adjustment screw × 1 Spacer (upper spacer × 2, lower spacer × 2) Frame mounting screw × 2 Rubber cable grommet (left grommet × 1, right grommet × 1) Cap for cable port × 2 Cable grommet locking screw × 2

AMFLOW REAR THRU AXLE The Amflow thru axle is used to mount the rear wheel on the frame of your Amflow eBike. The set consists of original Amflow spare parts and includes a thru axle, a spacer, and a seal. The thru axle is compatible with the Amflow PL Carbon 2025 and Amflow PL Carbon Pro 2025 models. AMFLOW REAR THRU AXLE KEY FEATURES: Thru axle with spacer and sealing ring For Amflow PL Carbon and PL Carbon Pro 2025 Original Amflow spare part Drive system: DJI Avinox Dimensions: 174.0 x 12.0 x 1.0 mm Compatibility: Amflow PL Carbon 2025 and Amflow PL Carbon Pro 2025

Amflow rubber plug for RIGHT head tube cable The Amflow rubber plug is positioned on the head tube and seals the opening in the frame from which the head tube cable exits. The plug is an original Amflow spare part and is available for both the left and right side. The rubber plug is also compatible with the Amflow PL Carbon and Amflow PL Carbon Pro models. Amflow rubber plug for head tube cable main features: Rubber plug for the head tube cable Mounted on the side of the head tube Available for the right and left side For Amflow PL Carbon and Amflow PL Carbon Pro Original Amflow spare part Drive system: DJI Avinox

Amflow rubber plug for LEFT head tube cable The Amflow rubber plug is positioned on the head tube and seals the opening in the frame from which the head tube cable exits. The plug is an original Amflow spare part and is available for both the left and right side. The rubber plug is also compatible with the Amflow PL Carbon and Amflow PL Carbon Pro models. Amflow rubber plug for head tube cable main features: Rubber plug for the head tube cable Mounted on the side of the head tube Available for the right and left side For Amflow PL Carbon and Amflow PL Carbon Pro Original Amflow spare part Drive system: DJI Avinox

AMFLOW PL CARBON 800 WH BIKE The Amflow PL e-mountain bike offers a peak power of 800 watts and is extremely lightweight. With its unique combination of power, range, weight, and smart features, this highly innovative e-MTB is just right for you. An e-MTB with full power and an incredibly light structure. Discover the new carbon Amflow PL e-mountain bike exclusively with us. Discover the future of e-mountain bikes with cutting-edge technology and impressive performance thanks to the DJI Avinox motor, which provides powerful support with torque up to 120 Nm. With an 800Wh battery for a range up to 157 km and a 2" OLED display with touchscreen and advanced smartphone connectivity. The full-carbon frame is light and robust, weighing only 2.27 kg. The top complete bike model weighs only 19.2 kg. The fast-charging function charges three times faster than the average e-bike chargers. High-quality frame components, such as 160 mm front suspension travel, 150 mm rear, and 29-inch wheels. In addition, an innovative design, a clean look with internal cable routing. AMFLOW PL CARBON 800 WH BIKE KEY FEATURES: 800-watt battery. DJI Avinox motor. Torque up to 120 Nm. 2" OLED display with advanced smartphone connectivity. Carbon frame. Front suspension: 160 mm. Rear suspension: 150 mm. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Carbon 29'' Boost, UDH, 4-Link, Mullet Ready, 150 mm travel Fork: FOX 36 Performance, 160 mm, GRIP damping, 44 mm offset Rear shock: FOX Float Performance (185 × 55 mm), Custom Tune, EVOL, 2 positions. Motor: DJI Avinox M1, 105 Nm (120 Nm-Boost) Battery: DJI Avinox 800Wh (integrated) Display: DJI Avinox 2'' OLED-Touch (Smart) Remote: DJI Avinox Wireless L+R Charger: DJI Avinox fast-charging function: 12 A/508 W Headset: 40×52×7 mm, 45° bearing Stem: Amflow Enduro, CNC aluminum one-piece 35x35mm Handlebar: Amflow Enduro aluminum 800mm 35mm, 35mm rise, 5° up, 9° back Grips: Amflow Enduro Lock-On Brakes: Magura MT5, 4 pistons, HC lever, MDR-C 203/203mm Shift levers: SRAM GX Eagle, 1-click, 12-speed Rear derailleur: SRAM GX Eagle 12-speed Crankset: DJI Avinox SL aluminum (M/L: 155 mm; XL/XXL: 160 mm) Chainring: SRAM Eagle E-MTB 104BCD 34T Cassette: SRAM Eagle PG-1230, 11-50T, 12-speed Chain: SRAM NX Eagle, 12-speed Front wheel: Amflow HMA-30 aluminum 29'', 30mm, 32H, tubeless-ready, J-Bend, 15x110, 6-bolt Rear wheel: Amflow HMA-30 aluminum 29'', 30mm, 32H, tubeless-ready, J-bend, 12x148, 6-bolt, 21-click Tires: VR-Maxxis Assegai MaxxTerra 29×2.5" WT 3C EXO TLR / HR-Maxxis Dissector MaxxTerra 29×2.4" WT 3C EXO+ TLR Saddle: Selle Royal SRX Plus Seatpost: KS Rage-i Dropper Aluminum (M:150mm, L:170mm, XL/XXL:190mm) *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED

AMFLOW LOCKRING FOR SPIDER With the Amflow lockring for eBike for DJI Avinox motor, you can mount the corona or the spider in a secure and reliable modo. Make sure to use the correct tightening torque. The specific tool is required for installation and removal. AMFLOW LOCKRING FOR SPIDER MAIN FEATURES: Lockring for eBike to fasten the corona or the spider For DJI Avinox M1 motor Original Amflow spare part for eBike Drivetrain system: DJI Avinox Manufacturer: Amflow DJI Avinox system: M1

Modulo Amflow wheel speed sensor The Amflow DJI Avinox speed sensor cable, together with the DJI Avinox speed sensor ring, regulates the maximum speed allowed by law. If your Amflow e-bike reaches 25 km/h, motor assistance is reduced. The cable is compatible with Amflow PL Carbon and Amflow PL Carbon Pro. Modulo Amflow wheel speed sensor KEY FEATURES: Features of the Amflow DJI Avinox speed sensor cable Speed sensor for DJI Avinox Regulates the maximum permitted speed Compatible with Amflow PL Carbon and PL Carbon Pro Original Amflow spare part

REAR AMFLOW DJI AVINOX M1 MOTOR MOUNTING SCREW The Amflow DJI Avinox M1 motor mounting screw allows you to mount the DJI Avinox M1 motor on your Amflow e-bike. The screw is available in two versions, both needed for installation. The long version is 78 mm long and is fixed to the front part of the motor, while the short version is 69 mm long and is fixed to the rear part of the motor. REAR AMFLOW DJI AVINOX M1 MOTOR MOUNTING SCREW KEY FEATURES: Amflow DJI Avinox M1 motor mounting screw Mounting screw for DJI Avinox M1 motor Available in 2 versions: 78 mm for the front part | 69 mm for the rear part Package contents: 1 screw Original Amflow spare part

AMFLOW E-MTB CHAIN GUIDE With the Amflow chain guide for eMTB, the chain always stays on track, even on the most demanding trails. Mounted directly on the frame, it ensures smooth and safe running of the chain on the sprocket, preventing it from coming off. The Amflow chain guide is mounted on all Amflow PL Carbon and PL Carbon Pro models. AMFLOW E-MTB CHAIN GUIDE KEY FEATURES: Perfect chain run in every riding situation. Increased riding comfort and safety. Simple installation and robust construction. Suitable for all Amflow PL Carbon models.

AMFLOW PL CARBON PRO 800 WH BIKE The Amflow PL Carbon e-mountain bike delivers a peak power of 850 watts and is ultra-lightweight (19.2 kg*). With its unique combination of power, range, weight and smart features, this innovative E-MTB is just ideal for trekking enthusiasts. E-MTB with full power and incredibly light structure. Carefully designed and built for maximum fun on the trails. 29 and 27.5 inches - the Amflow PL is compatible with 29 and 27.5 inch rear wheels. By adjusting the flip chips, it is possible to fit both sizes without changing the geometric center of gravity of the frame. Whether you want to improve your riding skills or simply enjoy high speeds, Amflow PL is ready for cruising. All-round reliability. The Amflow PL E-MTB and all components of the DJI Avinox Drive System have been certified by renowned organizations such as TÜV SÜD and TÜV Rheinland. In addition, Amflow has set up a testing platform to carry out a range of reliability tests on frame resistance, waterproofing and long-distance transport in real riding conditions. This ensures product stability and safety in extreme environments and provides comprehensive quality assurance. AMFLOW PL CARBON PRO 800 WH BIKE KEY FEATURES: Lightweight carbon frame (about 2.27 kg) DJI 105nm/850w drive system High-capacity 800wh battery 160 mm front travel, 150 mm rear travel 29" wheel (the rear can be replaced with a 27.5") 5 power modes Integrated display with smartphone connectivity THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: The frame of the AmFlow PL is ultra-light and designed to be balanced and agile, as well as to fully integrate the electrical technology while maintaining the riding feel of a standard bicycle. The 150 mm rear travel uses an advanced four-bar structure that significantly reduces pedal kickback and greatly improves pedaling efficiency, ensuring that every stroke counts. DJI Avinox Drive System: Designed and manufactured by DJI, the Avinox drive unit represents a huge step forward in electric motor technology for mountain bikes, with a compound planetary gearset with an industry-leading power-to-size ratio.The durable, high-strength polymer material inside the drive unit effectively suppresses noise during high-speed gear operation. Thanks to the multiple built-in precision sensors and DJI’s advanced algorithms, it provides strong and smooth assistance for a wide range of scenarios and conditions. Avinox M1 drive unit: 105 N-m, 2-inch OLED control display Rear shock: FOX FLOAT X Factory, Trunnion (185×55mm), custom tuning, EVOL Air sleeve, 2-position lever with LSC adjustment Fork: FOX 36 Factory, 160mm travel, GRIP X2 damper, 15×110mm, 44mm rake Derailleur: SRAM X0 Eagle 12-speed Crankset: DJI Avinox SL Crank (M/L: 155mm; XL/XXL: 160mm) Shifter: SRAM AXS Pod Controller Cassette: SRAM XG-1230, 11-52T Chain: SRAM X0 Eagle Brakes: Magura MT7 Pro hydraulic disc brake, HC lever, 4-piston caliper, 203mm Storm HC rotor (front and rear) Wheels: Amflow HMC-30, carbon, 29'', 30mm internal width, 28H, tubeless ready Tyres: Front: Maxxis Assegai MaxxTerra 29×2.5" WT 3C EXO E-25 TLR, Rear: Maxxis Dissector MaxxTerra 29×2.4" WT 3C EXO+ E-25 TLR Handlebar: Amflow Enduro Carbon handlebar Grips: Amflow Enduro grips Stem: Amflow Enduro, one-piece CNC Sella: Ergon SM PRO M/L Seatpost: Fox Transfer Factory *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED