PARK TOOL
CRANK PULLER OCTALINK ISIS PARK T...
€16,90
€27,20
The Park Tool CCP-44 is the crank puller dedicated to three-piece cranks fastened with an M12 or M15 bolt. It is the specific tool for removing crank arms from Shimano Octalink, ISIS Drive and ISIS Overdrive splined bottom brackets, where a square taper puller cannot work.
The puller threads into the M22 x 1.0 thread of the crank arm; turning the handle brings the tip against the bottom bracket spindle and draws the arm off progressively. The extra-fine thread and the long, comfortable handle provide the leverage and torque needed even on the tightest arms, while the floating tip system keeps operation smooth and extends the life of the tool.
Where to use the CCP-44 crank puller
Three-piece cranks with an M12 or M15 fixing bolt
Shimano Octalink splined bottom brackets
ISIS Drive and ISIS Overdrive systems
Crank arms with an M22 x 1.0 extractor thread
Not suitable for M8 or M10 bolts such as square taper or PowerSpline: for these Park Tool recommends the CCP-22 or CWP-7
Some fitness equipment cranks use nonstandard threads and are not compatible: check with the equipment manufacturer
Why choose the Park Tool CCP-44
Dedicated tool for cranks with M12 or M15 bolts, no adapters needed
Extra-fine thread for controlled, progressive removal
Long, comfortable handle for all the leverage stuck arms require
Floating tip for smooth operation and long life
A reference for workshops that often work on Octalink and ISIS cranks
For anyone working on Shimano Octalink cranks or ISIS Drive and ISIS Overdrive bottom brackets, the Park Tool CCP-44 crank puller is the tool that removes crank arms cleanly, under control and without unnecessary force, both at the workshop bench and for home maintenance.
TECHNICAL SPECIFICATIONS
GeneralCode: CCP-44Type: crank puller for three-piece cranksFeatures: extra-fine thread, long handle, floating tip
DimensionsExtractor thread: M22 x 1.0Crank bolt: M12 or M15
CompatibilitySystems: Shimano Octalink, ISIS Drive, ISIS OverdriveNot compatible: M8 or M10 bolts (square taper, PowerSpline)
PARK TOOL
PIN SPANNER 2.9MM FOR BOTTOM BRAC...
€9,90
€16,10
The Park Tool SPA-1 is the 2.9 mm pin spanner for bottom bracket cups, designed to adjust and remove the adjustable cup of traditional cup-and-cone bottom brackets. It is the right tool for anyone working on vintage bikes, restorations and city bikes with a classic bottom bracket.
The adjustable cup has no external flats to grip: you work through the small holes on its face. The SPA-1 has a steel body with two 2.9 mm pins that fit into those holes, so force reaches the cup without slipping and without damaging its edge. The green vinyl-coated handle gives a secure grip and makes the spanner easy to spot on the workshop tool board.
Where to use the Park Tool SPA-1 bottom bracket cup pin spanner
Adjusting the play of the adjustable cup on cup-and-cone bottom brackets.
Removing and refitting the adjustable cup during a bottom bracket overhaul.
Cups and components with holes for 2.9 mm pins.
Why choose the Park Tool SPA-1
2.9 mm pins, the hole size of most adjustable cups.
Steel body, tough enough for daily use at the workbench.
Vinyl-coated handle, comfortable and non-slip.
During adjustment it holds the cup in place while you tighten the lockring.
Before use, check that the holes in your cup are 2.9 mm. For anyone servicing traditional bottom brackets, the Park Tool SPA-1 pin spanner is a simple and indispensable tool.
TECHNICAL SPECIFICATIONS
GeneralCode: SPA-1Type: pin spanner for bottom bracket cupsHandle colour: green
DimensionsPin diameter: 2.9 mm
MaterialsBody: steelHandle: vinyl coating
CompatibilityCups: adjustable cups of cup-and-cone bottom brackets with 2.9 mm holes
Park Tool
PARK TOOL BOTTOM BRACKET LOCKRING...
€19,99
€32,10
The Park Tool HCW-5 is a double-ended wrench dedicated to the notched lockrings of adjustable cup-and-cone bottom brackets. This Park Tool HCW-5 bottom bracket lockring wrench lets you tighten and loosen the lockring that secures the adjustment of the left-hand cup, a key step for a smooth bottom bracket with no play.
The two ends have different profiles to suit the most common lockrings. One side has a single hook that engages most notched lockrings with an outside diameter from 43 to 46 mm; the other has a three-hook profile for 3-notch lockrings with a maximum outside diameter of 46 mm and a minor diameter, measured at the bottom of the notches, of 40 mm. The three-point grip spreads the load and reduces the risk of the wrench slipping when the lockring is very tight. The tool is heat-treated and nickel-plated to resist wear and corrosion, even with daily use.
Park Tool HCW-5 wrench compatibility
Adjustable cup-and-cone bottom brackets with a notched lockring
Single-hook end: lockrings with 43-46 mm outside diameter
Three-hook end: 3-notch lockrings, 46 mm maximum outside diameter and 40 mm minor diameter
Not suitable for fixed-gear hub lockrings: for these Park Tool recommends the HCW-17
Why choose the Park Tool HCW-5
Two profiles in a single wrench to cover the most common lockrings
Three-hook end for a more secure grip on tight lockrings
Heat treatment and nickel plating for long service life
Essential for anyone restoring or maintaining bikes with a traditional bottom bracket
For careful adjustment of cup-and-cone bottom brackets, the Park Tool HCW-5 bottom bracket lockring wrench is the dedicated tool that avoids damaging notches and finishes.
TECHNICAL SPECIFICATIONS
GeneralCode: HCW-5Type: double-ended bottom bracket lockring wrenchFinish: heat-treated and nickel-plated
CompatibilityBottom brackets: adjustable cup-and-coneSingle hook: notched lockrings with 43-46 mm outside diameterThree hooks: 3-notch lockrings, max outside diameter 46 mm, minor diameter 40 mmNot compatible: fixed-gear lockrings (use HCW-17)
PARK TOOL
I-BEAM 15-FUNCTION MULTI-TOOL WIT...
€44,60
The Park Tool IB-3 is a 15-function I-Beam multi-tool designed to handle most trailside repairs. This multi-tool with integrated chain tool packs hex wrenches, a screwdriver, a tire lever and spoke wrenches into a compact body: the essential emergency tools to carry on every ride, on the road, on gravel or on the trail.
The Park Tool I-Beam design combines eight hex wrenches from 1.5 to 8 mm, a T25 Torx-compatible driver and a flat blade screwdriver. The integrated chain tool is compatible with 5- to 12-speed chains and handles both emergency repairs and full chain removal and installation. A composite-wrapped tire lever, an 8 mm box wrench and two spoke wrenches, 3.23 mm (SW-0) and 3.45 mm (SW-2), complete the kit. All this in 90 x 40 x 25 mm and 170 grams.
Where to use the Park Tool IB-3 I-Beam multi-tool
Quick adjustments to saddle, seatpost, stem, levers and other components with the 1.5 to 8 mm hex wrenches.
Torx fasteners with the T25-compatible driver.
Trailside chain repair: the chain tool works on 5- to 12-speed chains, including SRAM 12-speed Flattop and T-Type chains.
Campagnolo 11-, 12- and 13-speed chains: the tool can install and remove rivets but cannot peen them.
Tire removal with the integrated lever and small spoke jobs with the SW-0 and SW-2 spoke wrenches.
8 mm hex nuts and bolts with the dedicated box wrench.
Why choose the Park Tool IB-3
15 functions in one tool, selected for the most frequent emergency repairs on the road.
Compact Park Tool I-Beam design, easy to stow in a jersey pocket, backpack or bike bag.
Integrated chain tool compatible with 5- to 12-speed drivetrains, so a broken chain will not leave you walking.
Two spoke wrenches and an 8 mm box wrench built in, with no need for extra tools.
Only 170 grams for such a complete emergency kit.
For riders who want a complete repair kit in a single tool on every ride, the Park Tool IB-3 I-Beam 15-function multi-tool is the practical choice from the benchmark brand in workshop tools.
TECHNICAL SPECIFICATIONS
GeneralCode: IB-3Type: I-Beam multi-toolFunctions: 15
DimensionsSize: 90 x 40 x 25 mmWeight: 170 g
CompatibilityChain tool: 5- to 12-speed chains, including SRAM 12-speed Flattop and T-TypeCampagnolo 11, 12 and 13-speed: rivet installation and removal (no peening)
ContentsHex wrenches: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 mmTorx-compatible driver: T25Screwdriver: flat bladeChain tool: integratedTire lever: composite-wrappedBox wrench: 8 mmSpoke wrenches: 3.23 mm (SW-0) and 3.45 mm (SW-2)
PARK TOOL
PROFESSIONAL TRAVEL AND EVENT TOO...
€1.149,90
€1.236,80
The Park Tool EK-3 is the professional travel and event tool kit designed for mobile work, from local events to professional race pits. It brings together a selection of 56 professional-level tools for hundreds of repair and maintenance tasks, packed to take up as little space as possible.
Everything fits in the Park Tool BX-2.2 Blue Box case, with a custom interior and a durable, lockable outer shell. The EK-3 professional tool kit combines bottom bracket and headset wrenches, chain and cassette tools, spoke wrenches, derailleur screwdrivers, hex and Torx-compatible wrenches, pliers and an adjustable torque driver. Alongside the bike-specific tools there are general-purpose tools such as a shop hammer, an adjustable wrench, scissors, picks and flush cut pliers, so you can handle even the less common surprises far from your own workbench.
Where to use the Park Tool EK-3 travel tool kit
Mechanical support at events, gran fondos and rides.
Race pits and tech zones, where complete yet portable tools are needed.
Mobile workshops and on-site repairs.
A base set for a new workbench, already organised in a case.
Teams following their riders on the road.
Why choose Park Tool EK-3
56 professional tools selected by Park Tool.
Covers hundreds of repair and maintenance tasks.
BX-2.2 Blue Box case with custom interior and lockable shell.
Dedicated tools for drivetrain, wheels, disc brakes, bottom bracket and headset.
Includes measuring tools such as a chain checker, tape measure and adjustable torque driver.
Also includes the DT-2.2 rotor truing tool, the CT-3.3 chain tool and the PW-4 professional pedal wrench.
Full list of tools in the technical specifications below.
For the mechanic who supports teams and events or wants a complete workshop always ready to go, the Park Tool EK-3 professional travel tool kit is a complete, ready-to-use working companion. Every tool has its own place in the case, so at the end of the job it is easy to check nothing is missing before moving on. Park Tool notes that tool kit contents are subject to change.
TECHNICAL SPECIFICATIONS
GeneralCode: EK-3Brand: Park ToolType: professional travel and event tool kitNumber of tools: 56Case: BX-2.2 Blue Box, custom interior, lockable shell
DimensionsShipping dimensions: 20" x 17.25" x 9.25" (L x W x H)Shipping weight: 29.1 lb
ContentsATD-1.2: Adjustable torque driverAWS-1: 3-way hex wrenchBBT-32: Bottom bracket tool, 20-splineBBT-9: Bottom bracket and lockring toolBO-2: Bottle openerCC-4.2: Chain checkerCN-10: Professional cable and housing cutterCNW-2: Chainring nut wrenchCP-1.2: Cassette pliersCT-3.3: Chain toolCWP-7: Compact crank pullerDCW-1: Double-ended cone wrench 13 mm/14 mm (2 pcs)DCW-2: Double-ended cone wrench 15 mm/16 mm (2 pcs)DCW-3: Double-ended cone wrench 17 mm/18 mmDSD-2: Derailleur screwdriverDSD-4: Derailleur screwdriverDT-2.2: Rotor truing toolFR-5.2H: Cassette lockring tool with handleGSC-1: GearClean brushHCW-15: Headset wrenchHMR-8: 8 oz shop hammerHT-8: 8 mm hex toolHXS-1.2: Professional L-shaped hex wrench setLP-7: Utility pliersMLP-1.2: Master link pliersMW-8: 8 mm metric wrenchMW-9: 9 mm metric wrenchMW-10: 10 mm metric wrenchPAW-12: 12-inch adjustable wrenchPW-4: Professional pedal wrenchRR-12.2: Tape measureSW-0: Spoke wrench 3.23 mmSW-2: Spoke wrench 3.45 mmSZR-1: ScissorsTL-6.3: Steel core tire leversTWS-1: Torx-compatible wrench setUP-SET: Utility pick setVC-1: Valve core toolZP-5: Flush cut pliers
PARK TOOL
DISC BRAKE MOUNT FACING SET PARK ...
€601,90
€935,70
The Park Tool DT-5.2 is the precision set for facing disc brake mounts, designed to align the caliper mounting surfaces with the rotor. This disc brake mount facing set works on IS, post and flat mounts, including low-clearance flat mounts on the chainstay.
The system locates on the wheel axle thanks to four telescoping axle adapters, which work with open or thru-axle dropouts of any width, including Boost 110, Boost 148 and fat bike axles. Two dedicated cutters cover the different mount types, and the whole set is stored in a case. By referencing the work to the wheel axle, the faced surfaces end up aligned with the rotor: the basis for fitting the caliper correctly, avoiding pad rub and getting consistent braking.
Where to use the Park Tool DT-5.2 facing set
Preparing IS disc brake mounts.
Facing post mounts.
Facing flat mounts, including low-clearance chainstay mounts.
Working with open dropouts and thru-axles of any width.
Compatibility with Boost 110, Boost 148 and fat bike axles.
Why choose Park Tool DT-5.2
One system for IS, post and flat mounts.
Four telescoping axle adapters for open or thru-axle dropouts.
Two precision cutters for the different mount surfaces.
Storage case to keep and carry the set.
For carbon fibre mounts Park Tool recommends the 2197 diamond abrasive adapter: high performance materials such as carbon fibre and titanium can dull frame prep tools much faster than steel or aluminium.
For workshops that prepare frames, fit disc brakes or solve caliper alignment problems, the Park Tool DT-5.2 disc brake mount facing set is professional-grade equipment. Owners of the earlier DT-5 can bring it up to DT-5.2 features with the DT-5UK upgrade kit. Kept tidy in its case, the set stays protected between jobs and is ready whenever a frame needs preparing.
TECHNICAL SPECIFICATIONS
GeneralCode: DT-5.2Brand: Park ToolType: disc brake mount facing set
CompatibilityBrake mounts: IS, post mount, flat mount (including low-clearance chainstay flat mounts)Axles: open or thru-axle dropouts of any width, including Boost 110, Boost 148 and fat bikeCarbon accessory: Park Tool 2197 diamond abrasive adapterUpgrade from DT-5: DT-5UK kit
Contents4 telescoping axle adapters2 cutters for IS, post and flat mountsStorage case
PARK TOOL
DIAL INDICATOR FOR ROTOR TRUING G...
€43,90
€68,50
The Park Tool DT-3i.2 is the dial indicator that mounts on the DT-3 rotor truing gauge and turns rotor checking into a numerical measurement. The dial magnifies even the smallest rotor deviations and displays readings as small as 0.01 mm, so you can work towards a precise tolerance instead of judging by eye.
The indicator attaches to the DT-3, which in turn is mounted on the truing stand: with the wheel in place, spin the rotor and read on the dial how far it deviates at each point. The measuring tip is elongated and fully adjustable, designed to fit most disc brake rotors, including irregularly shaped ones. Compared with the gauge indicator alone, the dial gives an objective reference: measure the initial runout, work on the rotor and check the value again until you reach the desired tolerance. It is a faster and above all repeatable way of working, useful when several mechanics share the same station.
How the Park Tool DT-3i.2 dial indicator works
Installs on the Park Tool DT-3 gauge, which is required for its use.
Magnifies the smallest rotor deviations and shows them on the dial.
Lets you quantify runout with 0.01 mm resolution.
Helps bring the rotor within an acceptable tolerance, measuring before and after truing.
The adjustable elongated tip also works on rotors with an irregular profile.
Why choose Park Tool DT-3i.2
Numerical runout reading to one hundredth of a millimetre.
Dedicated pairing with Park Tool's own DT-3 gauge.
Elongated, fully adjustable measuring tip.
Compatible with most bicycle disc brake rotors.
Makes rotor checks in the workshop repeatable and documentable.
Useful both for checking new rotors and for inspecting rotors after impacts or overheating.
For the mechanic who wants hard numbers rather than a visual estimate, the Park Tool DT-3i.2 dial indicator is the natural complement to the DT-3 gauge on the truing stand. Together they form a precise, tidy and easy-to-use disc rotor inspection station for everyday work, both for checking new rotors and for diagnosing those that have suffered impacts or overheating.
TECHNICAL SPECIFICATIONS
GeneralCode: DT-3i.2Brand: Park ToolType: dial indicator for rotor truing gaugeResolution: 0.01 mmMeasuring tip: elongated, fully adjustable
CompatibilityGauge: Park Tool DT-3 (required)Rotors: most disc brake rotors, including irregular shapes
PARK TOOL
DERAILLEUR SCREWDRIVER CROSS TIP ...
€31,99
€49,20
The Park Tool DSD-2 is the #2 cross-tip screwdriver designed for derailleur adjustment, where a tip that doesn't fit perfectly can damage the screw on the first turn. The Park Tool DSD-2 derailleur screwdriver has a tip machined to tolerances that exceed JIS standards, for a precise fit on adjustment and limit screws.
Many drivetrain components, especially those made in Japan, use JIS cross-head screws: with a standard Phillips screwdriver the tip tends to lift out and slip, while the DSD-2 seats fully in the recess and transfers rotation without play. This lets you dial in even quarter turns while setting up your shifting. The ergonomic 6061 aluminium handle is CNC machined and hard anodized, solid in the hand and built for daily workshop use; the 145 mm shaft easily reaches the screws on both front and rear derailleurs.
Where to use the Park Tool DSD-2 screwdriver
High and low limit screws on rear derailleurs.Limit screws on front derailleurs.B-tension adjustment screw on many rear derailleurs.Other #2 JIS cross-head screws on bike components.
Why choose Park Tool DSD-2
#2 cross tip machined beyond JIS standards for a precise fit in the screw.Lower risk of damaging the heads of adjustment screws.Fine control of rotation while tuning your shifting.CNC machined, anodized 6061 aluminium handle, tough and durable.Pairs with the DSD-4 5 mm flat blade to cover the most common adjustment screws.
To adjust your shifting precisely without damaging screws, the Park Tool DSD-2 #2 cross-tip derailleur screwdriver is the dedicated tool that deserves a permanent spot on the workbench.
TECHNICAL SPECIFICATIONS
GeneralItem code: DSD-2Tip: #2 cross tip, machined beyond JIS standardsTotal length: 232 mmShaft length: 145 mmWeight: 124 g
MaterialsHandle: CNC machined 6061 aluminium, hard anodized, ergonomic shape
PARK TOOL
DIGITAL BIKE SCALE PARK TOOL DS-1
€87,90
€137,90
The Park Tool DS-1 digital bike scale is purpose-built to weigh complete bicycles, frames, wheels and components. A capacity of up to 25 kg, 0.02 kg resolution and a large LCD display make it a practical tool for anyone who wants to know exactly how much their bike or the parts they are about to fit weigh.
The DS-1 is made for the workshop but is just as handy outside it: it clamps into a repair stand or hangs from a hook, or even from a tree branch. The double-armed hook is silicone-coated and supports up to 25 kg (55 lb). Weight is shown in kilograms or pounds, as you prefer, on the large LCD display. Clamped in the stand, it lets you weigh the bike right on the workbench without moving it; hung from a hook, it becomes a convenient solution away from the workshop too, in the garage or on the road.
What you can weigh with the DS-1 digital scale
Complete bikes: to check the weight after a build or an upgrade.
Frames: to know the real figure before a build from scratch.
Wheels: to compare different wheelsets or check a new build.
Components: to assess the effect of every change on the bike's final weight.
Before and after: to measure how much a new wheelset, crankset or cockpit really changes things, instead of relying on catalogue figures.
Why choose Park Tool DS-1
Maximum capacity of 25 kg (55 lb), suitable for complete bikes too.
Resolution of 0.02 kg (1 oz).
Large LCD display reading in kg or lb.
Double-armed, silicone-coated hook.
Can be clamped in a repair stand or hung from a hook.
For mechanics and weight-conscious riders, the Park Tool DS-1 digital bike scale is the right tool in the workshop and at home. It runs on 3 AAA batteries, not included, and is a real help both for those who count every gram and for workshops that want to give customers a precise figure.
TECHNICAL SPECIFICATIONS
GeneralCode: DS-1Brand: Park ToolDisplay: LCD, reading in kg or lbPower: 3 AAA batteries (not included)
DimensionsMaximum capacity: 25 kg (55 lb)Resolution: 0.02 kg (1 oz)
MaterialsHook: double-armed, silicone-coated
PARK TOOL
THREADED WORKSHOP DUMMY PEDAL PAR...
€11,90
€19,80
The Park Tool DP-2 threaded dummy pedal temporarily replaces the pedal and lets you turn the crankset to adjust the drivetrain even when the pedals are removed. It is not a pedal for riding: it is a workshop tool with a handle, designed for work on the repair stand.
Pedals are often removed for storage, transport or replacement, and without them turning the crank becomes awkward. The DP-2 has a 9/16" x 20 thread and engages securely in the drive-side crank arm of most modern bicycles. It installs in moments and the ergonomic handle makes it comfortable to turn the crankset while you work on the derailleurs.
When to use the DP-2 threaded dummy pedal
Bike assembly: while building up a new bike, before the pedals are fitted.
Shifting adjustment: turn the crankset comfortably while adjusting derailleurs and cables.
Bikes without pedals: after transport or storage, to work on the drivetrain without refitting the pedals.
Pedal replacement: the drivetrain stays adjustable while waiting for the new pedals.
Why choose Park Tool DP-2
Standard 9/16" x 20 thread.
Engages securely in the drive-side crank arm of most modern bicycles.
Ergonomic handle for comfortable use.
Quick installation.
Small but essential on the assembly bench, the Park Tool DP-2 threaded dummy pedal saves time on every drivetrain adjustment.
TECHNICAL SPECIFICATIONS
GeneralCode: DP-2Brand: Park ToolType: workshop dummy pedal (not a pedal for riding)Handle: ergonomic
CompatibilityThread: 9/16" x 20Fitting: drive-side crank arm of most modern bicycles
PARK TOOL
WORKSHOP DUMMY FORK PARK TOOL DF-1
€45,90
€71,40
The Park Tool DF-1 workshop dummy fork is the tool you need every time a fork comes off the bike. It is not a fork for riding: it is a dummy fork that temporarily takes the place of the original and holds the handlebar, headset spacers and brake caliper while the fork is being serviced or is off the frame.
It fits into the headset and is secured by the bike's own stem, just like a real steerer. The 28.6 mm (1 1/8") steerer is 284 mm long and the 51 mm flared cone is compatible with tapered head tubes. A star nut retains the top cap and spacers, keeping the headset stack in order. The nickel-plated and powder-coated finish is built to last in daily workshop use.
How to use the DF-1 workshop dummy fork
Fork service: during suspension maintenance the cockpit stays on the frame, with cables and brake hoses in place.
Brake caliper support: the integrated caliper holder has M5 and M6 threaded holes plus pass-through holes, and accepts all styles of disc brake caliper and most rim brake calipers.
Hydraulic brake protection: the included pad spacer prevents the lever from being squeezed by mistake while the caliper is away from the rotor.
Storage: the bike can be stored tidily even with the fork removed.
Why choose Park Tool DF-1
Quick installation: secured with the bike's own stem.
51 mm cone compatible with tapered steerers.
Star nut that keeps top cap and spacers in place.
Universal caliper holder for disc brakes and most rim brakes.
Pad spacer included to protect hydraulic brakes.
Nickel-plated and powder-coated finish for long life.
Check compatibility: the DF-1 works only with 1 1/8" threadless stems and is not suitable for threaded headsets or quill stems. For anyone who services forks regularly, the Park Tool DF-1 workshop dummy fork is the tidiest way to work without dismantling the cockpit.
TECHNICAL SPECIFICATIONS
GeneralCode: DF-1Brand: Park ToolType: workshop dummy fork (not a fork for riding)
DimensionsSteerer diameter: 28.6 mm (1 1/8")Steerer length: 284 mmFlared cone: 51 mm
MaterialsFinish: nickel-plated and powder-coated
CompatibilityStems: 1 1/8" threadless onlyTapered steerers: yesNot compatible: threaded headsets and quill stemsBrake calipers: all disc brake calipers, most rim brake calipers (M5, M6 and pass-through holes)
ContentsIncluded: DF-1 dummy fork, pad spacer
PARK TOOL
DIGITAL CALIPER ADAPTER PARK TOOL...
€13,90
€22,20
The Park Tool DCA-1 caliper adapter turns a standard caliper into a dedicated tool for two key workshop checks: the remaining thickness of disc brake rotors and the BCD, the bolt circle diameter of chainrings and cranks. It installs on most digital, dial or vernier calipers.
The DCA-1 works with two types of tips. The protruding contact points measure the centre of the rotor braking surface, avoiding the unworn outer edge that would distort the reading. The conical tips sit in the bolt holes and measure the centre-to-centre distance, the value used to calculate the BCD of chainrings and cranks.
Where to use the DCA-1 caliper adapter
Rotor wear check: measures thickness where the pads actually work, for a more accurate reading.
BCD measurement: measures the distance between bolt holes to calculate the bolt circle diameter of chainrings and cranks.
Scheduled maintenance: rotors should be checked regularly to ensure braking safety and performance.
Choosing spare parts: knowing the exact BCD helps you find the right chainring for the crankset.
Why choose Park Tool DCA-1
Fits most digital, dial and vernier calipers.
Compatible with Park Tool DC-1, DC-2 and DC-3 digital calipers.
One accessory for two key measurements: rotor wear and BCD.
Protruding tips designed to skip the unworn edge of the rotor.
If you already have a caliper on the bench, the Park Tool DCA-1 caliper adapter is the simplest way to make disc brake and drivetrain checks more precise.
TECHNICAL SPECIFICATIONS
GeneralCode: DCA-1Brand: Park ToolFunctions: disc rotor wear measurement, chainring and crank BCD measurement
CompatibilityCalipers: most digital, dial and vernier calipersPark Tool calipers: DC-1, DC-2, DC-3
PARK TOOL
REPLACEMENT CHAIN TOOL PIN KIT PA...
€11,90
€19,61
The Park Tool CTP-4K is the replacement chain tool pin kit for the Park Tool Master Chain Tool series: four pins and a 5/32" ball bearing to bring your workshop chain tool back to full efficiency when the driving pin is worn or damaged.
The pin is the hardest-working part of a chain tool: it pushes the chain rivet every time the chain is opened or closed. With the CTP-4K kit you replace only the worn component and the tool works precisely again, without having to replace it entirely. Park Tool provides a dedicated pin replacement guide and the kit instructions.
Chain tools compatible with the CTP-4K pin kit
CT-4 Master Chain Tool
CT-4.2 Master Chain Tool
CT-4.3 Master Chain Tool with peening anvil
CT-11 rivet peening tool for Campagnolo 11-speed chains
Why choose Park Tool CTP-4K
Genuine Park Tool spare part specific to Master Chain Tools
Four pins in the pack, so you always have spares ready in the workshop
Includes the 5/32" plunger ball bearing
Extends the life of your chain tool by replacing only the worn parts
For CT-1, CT-2, CT-3, CT-3.2, CT-3.3, CT-5 and CT-7 chain tools you need the CTP pin instead: the Park Tool CTP-4K replacement chain tool pin kit is dedicated to the CT-4 family and the CT-11.
TECHNICAL SPECIFICATIONS
GeneralCode: CTP-4KBrand: Park ToolType: replacement chain tool pin kit
CompatibilityChain tools: CT-4, CT-4.2, CT-4.3, CT-11
ContentsPins: 4 (part #775)Plunger bearing: 1 x 5/32" ball (part #776)
PARK TOOL
REPLACEMENT CHAIN TOOL PIN PARK T...
€1,90
€2,00
The Park Tool CTP is the replacement pin for Park Tool chain tools: the driving pin that removes and installs chain rivets. When the original pin wears or breaks, simply replace it to bring your chain tool back to full efficiency.
The pin is made of hardened alloy tool steel and comes with anaerobic threadlocker already applied to the threads: there is no need to add more or prep the threads.
Which chain tools the CTP pin fits
Park Tool CT-1, CT-2 and CT-3
Park Tool CT-3.2 and CT-3.3
Park Tool CT-5 and CT-7
How to replace it
Fully remove the handle assembly from the chain tool body
Remove the old pin with a 9/32" 12-point box-end wrench (a 7 mm wrench can help loosen it)
Thread in the new pin and tighten it to approximately 7-9 N·m
Grease the handle threads and reinstall the handle
Why choose Park Tool CTP
Genuine Park Tool replacement in hardened alloy steel
Threadlocker pre-applied, ready to install
Check periodically that the pin is snug: a loose pin is one of the leading causes of breakage
To keep your bench chain tool always efficient, the Park Tool CTP replacement pin is the spare to have in the workshop.
TECHNICAL SPECIFICATIONS
GeneralCode: CTPType: replacement driving pin for chain toolsTightening torque: approx. 7-9 N·mInstallation wrench: 9/32" or 7 mm box-end
MaterialsPin: hardened alloy tool steelThreads: pre-applied anaerobic threadlocker
CompatibilityPark Tool chain tools: CT-1, CT-2, CT-3, CT-3.2, CT-3.3, CT-5, CT-7
PARK TOOL
PROFESSIONAL SHOP CHAIN TOOL UP T...
€152,99
€231,20
The Park Tool CT-15 is the professional chain tool designed for daily use in the workshop: it presses chain rivets out and back in on every drivetrain, from single-speed half-link chains up to 13-speed systems. A tool built for those who shorten, install and replace chains every day.
The heart of the CT-15 is its wide floating shelf, which keeps the chain centered and secure throughout the operation, so the driving pin works in line with the rivet. The handle stores the spare driving pins and the peening anvil, always within reach. The tool is fully rebuildable: wear parts can be replaced without changing the tool.
CT-15 chain tool compatibility
1/8" and 3/16" single-speed chains and half-link chains
5- to 13-speed derailleur chains
SRAM 12-speed Flattop and T-Type
Shimano XTR 12-speed
Campagnolo Ekar 13-speed
Removable anvil for peening connecting rivets on Campagnolo 11- to 13-speed chains
A chain tool is needed every time a chain has to be sized on a new bike, replaced because it has stretched, or opened for drivetrain work. In a shop with many jobs a day, the stability of the chain on the shelf and the quality of the driving pin make the difference between a quick, clean job and a crooked rivet: the CT-15 is built to deliver exactly that consistency, job after job.
The integrated anvil makes the CT-15 a complete solution on Campagnolo drivetrains too, where the connecting rivet must be peened after installation: the whole job is done with one tool, without looking for separate accessories.
Why choose Park Tool CT-15
Built for intensive, daily workshop use
Wide floating shelf that keeps the chain centered and stable
Compatible from single-speed chains up to 13-speed
Campagnolo peening anvil included and stored in the handle
Two spare driving pins included (Park Tool part 2987)
Fully rebuildable with Park Tool replacement parts
For the shop that works on every type of drivetrain, the Park Tool CT-15 professional chain tool is the benchmark for precise, repeatable work.
TECHNICAL SPECIFICATIONS
GeneralCode: CT-15Type: professional shop chain toolReplacement driving pins: Park Tool 2987
CompatibilitySingle-speed: 1/8", 3/16" and half-link chainsDerailleur chains: 5 to 13 speeds, including SRAM 12-speed Flattop and T-Type, Shimano XTR 12-speed, Campagnolo Ekar 13-speedPeening: Campagnolo 11- to 13-speed connecting rivets
ContentsPeening anvil: removable, stored in the handleSpare driving pins: 2
PARK TOOL
OVERSIZED CROWN RACE SETTING SYST...
€126,99
€195,51
The Park Tool CRS-15.2 is the professional system for installing the headset crown race on forks with an oversized 1-1/4" or 1.5" steering column. Using the long, strong driver tube, one of the included drifts and a hammer or mallet, the race is driven safely and accurately into its correct position on the fork crown seat.
The set includes two anodised aluminium drifts, one 1-1/4" and one 1.5": the drift material prevents damage to the crown race while it is driven. The system works on steering columns from 31.7 to 38.1 mm in diameter, measured at the base of the column, and is compatible with SHIS sizes 33 and 40. It accepts steering columns up to 330 mm long, or 425 mm with the CRS-15EXT extension. A hammer or mallet is not included.
How the CRS-15.2 crown race setting system works
Choose the 1-1/4" or 1.5" drift to match the fork steering column
Slide the driver tube over the steering column, with the drift against the race
Strike the tube with a hammer or mallet until the race is fully seated
1-1/4" and 1.5" steering columns (31.7-38.1 mm)
Steering column length up to 330 mm, up to 425 mm with extension
SHIS sizes 33 and 40
For 1" or 1-1/8" columns Park Tool recommends the CRS-1
Why choose the Park Tool CRS-15.2
System dedicated to forks with oversized steering columns
Two specific drifts for the 1-1/4" and 1.5" standards
Anodised aluminium drifts that protect the crown race
Long, strong driver tube for safe and accurate installation
Compatible with SHIS sizes 33 and 40
For the workshop that fits headsets on forks with oversized steering columns, the Park Tool CRS-15.2 oversized crown race setting system is the tool that seats the race correctly and without marking it, complementing the CRS-1 for 1" and 1-1/8" columns.
TECHNICAL SPECIFICATIONS
GeneralCode: CRS-15.2Type: oversized fork crown race setting system
DimensionsSteering column diameter: 1-1/4" and 1.5" (31.7-38.1 mm, measured at the base)Steering column length: up to 330 mm, 425 mm with CRS-15EXT extension
MaterialsDrifts: anodised aluminium
CompatibilitySHIS standard: 33, 401" and 1-1/8" columns: not compatible, use CRS-1
ContentsDriver tube: 1Drifts: 2 (1-1/4" and 1.5")Not included: hammer or mallet
PARK TOOL
CROWN RACE SETTING SYSTEM PARK TO...
€97,90
€152,20
The Park Tool CRS-1 is the professional system for installing the headset crown race on forks with a 1" or 1-1/8" steering column. Using the long, sturdy driver tube, one of the included drifts and a hammer or mallet, the race is driven evenly into its correct position on the fork crown seat.
The set includes six anodised aluminium drifts, three for the 1" standard and three for the 1-1/8" standard: the drift material avoids damaging the crown race while it is driven. The system works on steering columns from 25.4 to 28.6 mm in diameter, measured at the base of the column, and is compatible with SHIS sizes 26, 27 and 30. It accepts steering columns up to 340 mm long. A hammer or mallet is not included.
How the CRS-1 crown race setting system works
Choose the drift that matches the steering column standard and the race being fitted
Slide the driver tube over the fork steering column, with the drift against the race
Strike the tube with a hammer or mallet until the race is fully seated
1" and 1-1/8" steering columns (25.4-28.6 mm) up to 340 mm long
SHIS sizes 26, 27 and 30
For oversized 1-1/4" or 1.5" columns Park Tool recommends the CRS-15.2
Why choose the Park Tool CRS-1
Complete system for installing crown races on 1" and 1-1/8" columns
Six dedicated drifts, three for each standard
Anodised aluminium drifts that protect the crown race
Long, sturdy driver tube for even driving force
Compatible with SHIS sizes 26, 27 and 30
For the workshop that fits new headsets, replaces forks or transfers components from one frame to another, the Park Tool CRS-1 crown race setting system is the tool that seats the race correctly and without marking it, on every fork with a 1" or 1-1/8" steering column.
TECHNICAL SPECIFICATIONS
GeneralCode: CRS-1Type: fork crown race setting system
DimensionsSteering column diameter: 1" and 1-1/8" (25.4-28.6 mm, measured at the base)Steering column length: up to 340 mm
MaterialsDrifts: anodised aluminium
CompatibilitySHIS standard: 26, 27, 30Oversized 1-1/4" and 1.5" columns: not compatible, use CRS-15.2
ContentsDriver tube: 1Drifts: 6 (3 for 1" and 3 for 1-1/8")Not included: hammer or mallet
PARK TOOL
CYCLONE CHAIN SCRUBBER PARK TOOL ...
€26,90
€42,20
The Park Tool CM-5.3 Cyclone is the compact chain scrubber for cleaning the chain without taking it off the bike, ideal for regular maintenance at home or at the bench. It is the right tool for riders who want to clean their chain often, after wet or gravel rides, without removing anything. The Park Tool CM-5.3 Cyclone chain scrubber combines an extra-large reservoir, four rotating brushes and a magnet that collects the scrubbed particles.
The reservoir holds 59 ml of solvent: fill it, clip the body onto the chain and turn the pedals. The four rotating brushes work on the links while the magnet at the bottom of the reservoir collects the particles removed from the chain. As the chain exits, a sponge wipes off excess solvent and reduces drips. The handle is reversible, so the CM-5.3 also works on centre-drive and rear hub-drive e-bikes.
How to use the Park Tool CM-5.3 Cyclone chain scrubber
Pour solvent into the reservoir: Park Tool recommends CB-4 ChainBrite degreaser for best results.
Keep the tool in line with the chain while turning the pedals, so the chain stays on the sprockets.
Do not use petrol, kerosene or other highly volatile or flammable solvents.
Empty the tool when finished: do not store cleaning fluid inside and dispose of it responsibly.
After cleaning, let the chain dry and lubricate it again before riding.
The magnet usually does not need to be removed during normal cleaning.
Why choose the Park Tool CM-5.3
Compatible with all multi-speed and single-speed chains, from wide 3/16" to narrow 12 and 13-speed.
Reversible handle for centre-drive and rear-drive e-bikes.
Built-in magnet that holds the scrubbed particles.
Exit sponge that limits drips on frame and floor.
Brushes and sponge replaceable with the RBS-5 spare kit.
On some single-speed bikes the clearance between chain and chainstay may be too small for full use of the tool. For every other drivetrain, the Park Tool CM-5.3 Cyclone chain scrubber is a practical way to keep the chain clean between services, on road, gravel, MTB and e-bikes.
TECHNICAL SPECIFICATIONS
GeneralCode: CM-5.3Type: Cyclone chain scrubberCleaning system: four rotating brushes, reservoir magnet, exit spongeHandle: reversibleSpare parts: RBS-5 brushes and spongeRecommended cleaner: CB-4 ChainBrite
DimensionsReservoir capacity: 59 ml
CompatibilityMulti-speed and single-speed chains, from 3/16" to 12 and 13-speedCentre-drive and rear-drive e-bikes thanks to the reversible handleSome single-speed bikes with little chain-to-chainstay clearance may not be compatible
PARK TOOL
BOTTOM BRACKET TAPPING AND FACING...
€908,90
€978,10
The Park Tool BTS-1 is the bottom bracket tapping and facing set designed to check and repair threaded bottom bracket shells. With the English taps and the facing cutter you bring the shell threads and faces back to the correct condition before installing the bottom bracket.
The heart of the system is the two-piece handle that passes through the bottom bracket shell: by connecting both sides, it keeps the right and left taps perfectly aligned with each other. The English taps check and restore thread alignment, and once threaded in they act as a guide for the cutter, so that the shell faces are machined square to the bottom bracket axis. Park Tool recommends using a cutting fluid, such as Park Tool CF-2, when machining.
How the BTS-1 bottom bracket set works
The 692 left-hand tap works on the drive side of English-threaded shells, the 691 right-hand tap on the non-drive side.
The two-piece handle passes through the shell and keeps both taps on axis while threading.
With the taps in place, the 45 mm facing cutter (690) faces the shell using the taps themselves as a guide.
The result is a shell with aligned threads and parallel faces, ready for bottom bracket installation.
Why choose Park Tool BTS-1
Tapping and facing in a single coordinated set.
Two-piece through-shell handle to keep both sides of the shell aligned.
Faces machined square to the bottom bracket axis thanks to the tap guide.
Expandable system: Park Tool offers as options the 693 Italian taps 36 mm x 24 TPI (two required), the 647R and 647L T47 taps (M47 x 1.0) and the 690-XL 57 mm oversized cutter.
Replacement parts available for every component, from the 690, 690-XL and 690-XXL cutters to the 684S, 688 and 648R/648L facing guides.
For the workshop preparing new frames or rescuing bottom bracket shells with damaged threads, the Park Tool BTS-1 tapping and facing set is the foundation for a precise, reliable bottom bracket installation.
TECHNICAL SPECIFICATIONS
General
Code: BTS-1
Type: tap and cutter set for threaded bottom bracket shells
Handle: two-piece, through-shell
Recommended cutting fluid: Park Tool CF-2 (not included)
Compatibility
Thread: English 1.370" x 24 TPI
Options (not included): 693 Italian taps 36 mm x 24 TPI; 647R/647L T47 taps M47 x 1.0; 690-XL 57 mm cutter
Contents
691: right-hand tap 1.370" x 24 TPI (non-drive side, English thread)
692: left-hand tap 1.370" x 24 TPI (drive side, English thread)
690: 45 mm facing cutter
Handle: two-piece
PARK TOOL
CABLE STRETCHER PARK TOOL BT-2
€55,99
€76,70
The Park Tool BT-2 is the "fourth hand" cable stretcher designed for installing and adjusting derailleur and brake cables. One hand grips the cable and pulls it taut, while the other stays free to tighten the pinch bolt.
The heart of the BT-2 cable stretcher is its thumb-operated ratcheting lock: once the desired tension is reached, the ratchet holds the cable in place without you having to keep squeezing the handles. The body is made of heat-treated, chrome-plated steel, while the cushioned grips ensure a comfortable hold even when working on many bikes in a row. It is a tool designed for the professional workshop but equally suited to the home mechanic.
How to use the BT-2 cable stretcher
Insert the free end of the cable between the jaws, beyond the brake or derailleur pinch bolt.
Squeeze the handles with one hand to pull the cable to the correct tension.
The ratcheting lock holds the tension: no need to keep the handles squeezed.
With your free hand tighten the pinch bolt, then release the ratchet and remove the tool.
Repeat to fine-tune the adjustment of cable-operated derailleurs and brakes.
Why choose Park Tool BT-2
"Fourth hand" function: cable tension and pinch bolt tightening handled by one person.
Thumb-operated ratcheting lock that holds the set tension.
Heat-treated, chrome-plated steel, built for daily workshop use.
Cushioned grips for comfortable work.
Suitable for professional mechanics, shops and enthusiasts who service their own bike at home.
Fitting a new cable, taking up slack at a brake lever or re-tuning a derailleur becomes a precise, repeatable job: the tension stays exactly where you set it while you tighten the pinch bolt. The Park Tool BT-2 cable stretcher is the extra hand that makes every cable adjustment fast and accurate.
TECHNICAL SPECIFICATIONS
General
Code: BT-2
Type: "fourth hand" cable stretcher
Locking: thumb-operated ratchet
Grips: cushioned
Use: professional workshop and home use
Materials
Body: heat-treated, chrome-plated steel
Compatibility
Cables: derailleur cables and brake cables
PARK TOOL
KEYCHAIN BOTTLE OPENER PARK TOOL ...
€6,90
€10,40
The Park Tool BO-3 is the compact keychain bottle opener with the famous Park Tool blue handle and a built-in 10 mm wrench. At just 76 mm long, it is the bottle opener to carry with you at all times, clipped to your keys.
Its small size and weight of only 24 grams let you keep it on your key ring, in your pocket or in your wedge pack without noticing it. The 10 mm opening adds a real tool function to an everyday object.
Where to use the BO-3 keychain bottle opener
Clipped to your key ring, always within reach.
In your pocket or wedge pack during your rides.
As a small gift for anyone who loves bikes and Park Tool tools.
Why choose Park Tool BO-3
Pocket size: 76 mm long and 24 g in weight.
10 mm open-end wrench built into the body.
Handle in the unmistakable Park Tool blue.
Compared with the BO-2 bench bottle opener, the Park Tool BO-3 is designed to travel with you: a take-along companion you should never be without.
TECHNICAL SPECIFICATIONS
General
Code: BO-3
Type: keychain bottle opener
Additional function: 10 mm open-end wrench
Handle colour: Park Tool blue
Dimensions
Length: 76 mm (3")
Weight: 24 g (0.85 oz)
PARK TOOL
BOTTLE OPENER PARK TOOL BO-2
€6,90
€11,70
The Park Tool BO-2 is a stainless steel bottle opener built for demanding use and designed to complement any tool collection. A bottle opener with a handle in the famous Park Tool Blue, made to sit on the workbench or in the garage.
The stainless steel body is built to last for years, while the vinyl-dipped handle gives a comfortable grip every time. At 185 mm long and light in the hand, it is easy to keep clean because it is dishwasher safe.
Where to use the BO-2 bottle opener
In the workshop, next to your other Park Tool tools.
In the garage or kitchen, for everyday use.
As a gift idea for mechanics and cycling enthusiasts.
Why choose Park Tool BO-2
Durable stainless steel, made to last.
Park Tool Blue vinyl-dipped handle, comfortable and instantly recognisable.
Dishwasher safe.
The Park Tool BO-2 bottle opener is the finishing touch for every bike lover's workbench.
TECHNICAL SPECIFICATIONS
GeneralCode: BO-2Type: bottle openerCare: dishwasher safe
DimensionsLength: 185 mm (7.25")Weight: 88 g (3.1 oz)
MaterialsBody: stainless steelHandle: Park Tool Blue vinyl dip
PARK TOOL
BIKE CLEANING BRUSH SET 4 PIECES ...
€18,90
€29,60
The Park Tool BCB-4.2 is a four-piece bike cleaning brush set, with each brush dedicated to a stage of the wash: from soaping the frame to removing caked-on dirt from gears and small components.
The brushes have ergonomically designed dual-density handles for a sure grip. The set combines soft bristles for soaping, a sponge combined with bristles for heavier scrubbing and tough nylon bristles for the drivetrain, so every area of the bike is cleaned with the most suitable tool.
What is in the Park Tool BCB-4.2 brush set
Soft-bristle brush for soaping and general cleaning
Frame brush with sponge and bristles for heavy-duty scrubbing
Tapered detail brush to reach tight spots
GearClean GSC-1 brush with tough nylon bristles and a curved toothed pick to remove grit and grime from gears and small components
Why choose the Park Tool BCB-4.2
Four different brushes to cover every stage of the wash
Ergonomic dual-density handles with a sure grip
GSC-1 brush with toothed pick for the drivetrain
One-year Park Tool limited warranty
A clean bike works better and lets you spot wear and problems early. With the Park Tool BCB-4.2 bike cleaning brush set washing becomes quick and thorough.
TECHNICAL SPECIFICATIONS
GeneralCode: BCB-4.2Type: bike cleaning brush setNumber of pieces: 4Handles: ergonomic, dual-densityWarranty: 1 year (Park Tool limited warranty)
MaterialsGSC-1 bristles: nylon
ContentsSoft-bristle brush: for soapingFrame brush: with sponge and bristlesDetail brush: taperedGearClean GSC-1 brush: nylon bristles and curved toothed pick
PARK TOOL
PRESS FIT BOTTOM BRACKET BEARING ...
€49,90
€78,20
The Park Tool BBT-90.3 is the press fit bottom bracket bearing tool set designed to remove and install bearings and bearing cups in most press fit bottom brackets with a 22 or 24 mm spindle, such as Shimano press fit and SRAM GXP press fit systems, including the BB90 and BB92 standards.
The set combines two functions. The first is removal: the bearing remover passes through the bottom bracket shell and, with its fingers, grips the bearing from the opposite side to drive it out. The remover shaft has a nominal outer diameter of 22 mm, while the fingers reach 26 mm. The second is installation: the set includes bushings to be used with a cup press, such as the Park Tool HHP-2 or HHP-3 (sold separately), to press new bearings in straight and under control.
How the Park Tool BBT-90.3 press fit bearing tool set works
Insert the remover into the bottom bracket shell until it reaches the bearing to be removed
The remover fingers grip the inner edge of the bearing or cup
Working on the end of the shaft drives the bearing out of the shell
For reassembly, fit the bushings to the cup press and press the new bearings into place
Why choose the Park Tool BBT-90.3
One set for removing and installing press fit bearings
Compatible with most press fit bottom brackets for 22 and 24 mm spindles
Through-shell remover that works from inside the shell, where press fit bearings offer no other grip points
Dedicated bushings for pressing new bearings with Park Tool HHP-2 and HHP-3 presses
Instructions available as a PDF on the Park Tool website
Creaks, play or worn bearings in a press fit bottom bracket call for specific tools so as not to damage the frame seats. Before pressing in new bearings it is good practice to clean the shell seats carefully and check them for marks or burrs left by the old bearings, so the new installation will be precise and quiet. With the Park Tool BBT-90.3 press fit bottom bracket bearing tool set replacement becomes a tidy, repeatable job.
TECHNICAL SPECIFICATIONS
GeneralCode: BBT-90.3Type: press fit bottom bracket bearing removal and installation setRecommended press: Park Tool HHP-2 or HHP-3 (sold separately)
DimensionsRemover shaft nominal outer diameter: 22 mmRemover fingers nominal outer diameter: 26 mm
CompatibilityBottom brackets: most press fit with 22 or 24 mm spindleExamples: Shimano press fit, SRAM GXP press fit, BB90, BB92
ContentsRemover: through-shell bearing removerBushings: bushings for bearing installation with a press