Santa Cruz

The Santa Cruz Vala AL Deore 2026 is an enduro e-MTB designed to offer a perfect balance of power, control, and reliability on the most challenging terrains. The aluminum frame and the latest generation Bosch Performance CX platform make it an ideal bike for tackling long technical climbs and aggressive descents with complete confidence. The mullet configuration (29” front and 27.5” rear) ensures an ideal combination of high-speed stability and agility in tighter, more technical sections. With 160mm of travel, the Vala is ready for modern enduro and the most extreme trails. Bosch Performance CX Motor and 600Wh Battery The heart of the bike is the Bosch Performance CX, one of the most powerful and reliable motors in the e-MTB segment, characterized by natural power delivery and high torque. The integrated 600Wh Bosch PowerTube battery ensures good range, perfect for long days in the mountains with constant support and efficient energy management. True Enduro Frame and Suspension The Santa Cruz aluminum frame is designed with advanced kinematics that ensure constant traction, sensitivity on small bumps, and great ability to absorb large impacts. The 160mm platform offers a balanced behavior between comfort and performance, ideal for aggressive and technical riding. Shimano Deore 12-Speed Drivetrain The Shimano Deore 12s setup guarantees reliability, precision, and durability even in intense use conditions. The wide range of the cassette allows you to tackle steep climbs with ease, making the most of the Bosch motor's assistance. Powerful Braking and Total Control Shimano hydraulic disc brakes ensure high braking power and precise modulation, essential for the long and technical descents typical of modern enduro. Modern Santa Cruz Geometry The geometry is designed to offer stable and aggressive riding, while maintaining agility in technical sections. Key advantages include: High stability at high speeds Total control in technical sections Centered and secure riding position on descents Surprising agility for a full-power e-MTB Strengths Powerful and responsive Bosch Performance CX motor Integrated 600Wh battery for excellent range 160mm travel for enduro/all-mountain use Mullet 29”/27.5” configuration for ideal balance Robust and reliable Shimano Deore 12-speed drivetrain Santa Cruz aluminum frame designed for maximum durability Ideal for The Santa Cruz Vala AL Deore is perfect for riders looking for a full-power e-MTB for: Mountain enduro Technical and challenging trails Long assisted climbs Year-round sporty and intense use TECHNICAL SPECIFICATIONS Electronics Motor: Bosch Performance CX BDU38 Battery: Bosch PowerTube 600Wh Frame Frame: Aluminum MX frame, 150mm travel, four-bar suspension system Material: Aluminum Rear travel: 150mm Fork: RockShox Psylo Gold RC, 160mm travel, 44mm offset Shock: RockShox Deluxe Select, 205x60mm Headset: FSA IS-2/47/42 ACB, Integrated IS41/52 Brakes Brakes: Shimano Deore M6120 Front rotor: Shimano RT66, 220mm Rear rotor: Shimano RT66, 203mm Drivetrain Rear derailleur: Shimano Deore M6100 SGS, 12-speed Cassette: Shimano Deore 6100, 10-51t Chain: Shimano Deore 6100, 12-speed Crankset: E13 Helix eSpec, 160mm Chain guide: OneUp Chainguide Max chainring size: 36t Wheels Wheel configuration: MX mullet Front rim: WTB ST Tough 30 Rear rim: WTB ST Tough 30 Front hub: WTB Frequency Sport, 15x110, 6-Bolt, 32h Rear hub: WTB Frequency Sport, 12x148, MicroSpline, 6-Bolt, 32h Front tire: Maxxis Assegai 29"x2.5", EXO+ Rear tire: Maxxis Minion DHR II 27.5"x2.5", DoubleDown Valves: Reserve Fillmore Valves Max tire width: 2.5" Cockpit Handlebar: Santa Cruz Bicycles Aluminum Bar, 35x800mm, 30mm rise Stem: OneUp Enduro Stem, 42mm Grips: Santa Cruz Bicycles House Grips Saddle and seatpost Saddle: WTB Silverado Medium, steel rails Seatpost: SDG Tellis Dropper, 31.6mm Additional specifications Suspension system: Four-bar Rear hub spacing: 148mm Max rotor size: 220mm UDH: Yes Recommended sag: 30% Clamp diameter: 36.4mm Bottom bracket: EMTB Rear brake mount: 200mm PM Weight 24.09 kg (53.11 lb) *Note: We do our best to ensure the accuracy of technical specifications, but they are subject to change without notice.

Con 170 mm di escursione sia anteriore che posteriore, la Bullit è la scelta perfetta per chi cerca il brivido della discesa senza scendere a compromessi in salita. Potente, agile e resistente, è la e-bike pensata per i rider che vogliono superare ogni ostacolo. Spinta dal motore Bosch Performance Line CX, silenzioso e reattivo, trasforma ogni salita in un’esperienza entusiasmante, portandoti rapidamente dove iniziano i veri trail da downhill. Costruita per durare nel tempo, la Bullit è progettata con l’obiettivo di offrire maneggevolezza eccezionale e resistenza reale. Telaio robusto, giunzioni rinforzate e componenti di qualità evitano compromessi: niente peso inutile, solo design ottimizzato e affidabilità assoluta. Dettagli tecnici come il seatstay bridge, il link monopezzo e il tubo obliquo chiuso garantiscono rigidità e assenza di vibrazioni. Il chip di regolazione geometrica permette di personalizzare altezza del movimento centrale e angolo di sterzo, mentre il chip di progressione consente di adattare la risposta della sospensione da 26% a 29%. Con una geometria proporzionale, ogni taglia mantiene lo stesso equilibrio e controllo, per una guida sicura e performante su qualsiasi terreno. La versione C 90 è equipaggiata con la nuova trasmissione Sram 90, freni SRAM Maven Base e ruote in alluminio. BICI SANTA CRUZ BULLIT 4 C 90 MX CARATTERISTICHE PRINCIPALI: Telaio: Carbon C MX 170mm Travel, 4-Bar, larghezza massima pneumatico 27.5 x 2.5, freni post mount con rotori da 200mm, Santa Cruz UDH Motore: Bosch Performance Line CX Smart System (BDU38), 250W, picco 600W, 25km/h, 85Nm Display: Mini Remote + LED Remote Batteria: Bosch PowerTube Battery 600Wh Caricabatterie: Caricatore Rapido, 4A Forcella: FOX 38 Float Performance, Grip, 170mm Ammortizzatore: FOX Float X Performance, 205x65 Cambio: SRAM 90 Eagle T-Type, 12v Comando cambio: SRAM 90 Eagle T-Type, Single Click, 12v Pacco pignoni: SRAM XS1275 Eagle T-Type, 10-52D Catena: SRAM GX Eagle T-Type, Flattop, 12v Pedivelle: E13 Helix eSpec, 155mm Freno anteriore: SRAM Maven Base, 4 pistoni Freno posteriore: SRAM Maven Base, 4 pistoni Dischi: SRAM HS2 200mm / SRAM HS2 200mm Copertone anteriore: Maxxis Assegai 29"x2.5", 3C, MaxxGrip, Double Down Copertone posteriore: Maxxis Minion DHRII 27.5x2.5, 3C DoubleDown Cerchi: Reserve 30|HD AL Mozzo anteriore: E13 SL, 12x110, 6-Bolt, 32h Mozzo posteriore: E13 SL E-Spec, 12x148, XD, 6-Bolt, 32h Manubrio: Burgtec Aluminum Bar, 800mm, Rise 20mm (S), Rise 35mm (M-XXL) Attacco manubrio: OneUp Stem, 42mm Sella: SDG Bel-Air V3, Max Lux-Alloy Reggisella: OneUp V3 Dropper Post, 31.6 Peso massimo consentito: 150 kg Peso: 22,42 kg *PRO-M STORE OFFRE GRATUITAMENTE IL SERVIZIO DI PRE-ASSEMBLAGGIO DELLA BICI: REGGISELLA, FORCELLA, CAMBIO E FRENI SONO GIÀ MONTATI

The Santa Cruz Vala 90 2026 is a full-power e-MTB designed to deliver maximum precision, power, and control on the most technical trails. It combines the brand’s legendary build quality with a next-generation Bosch electric platform for a smooth, powerful, and natural riding experience. Uncompromising Performance The Carbon C frame provides stiffness, low weight, and responsiveness, while the modern geometry ensures stability on descents and agility on climbs. The suspension setup with 160 mm front and 150 mm rear travel is designed to absorb every impact while maintaining a high level of control. Motor and Bosch E-Bike System Equipped with the powerful Bosch Performance Line CX, the Vala 90 delivers natural and progressive assistance, ideal for both long adventures and aggressive trail riding. The integrated 600 Wh battery provides excellent range without compromising frame handling. Premium Components Fork FOX 38 Float Performance Shock FOX Float X Performance Drivetrain SRAM 90 Eagle T-Type MX (mullet) wheel setup for maximum versatility Trail-Oriented Design Every detail of the Vala 90 is engineered to deliver an intuitive and precise riding experience: the four-bar suspension system, optimized weight distribution, and adjustable geometry make this one of the most capable e-bikes in its category. Built for Demanding Riders Perfect for riders looking for a powerful yet refined e-MTB, the Vala 90 2026 is designed to handle technical climbs, fast descents, and long days in the saddle with maximum efficiency. TECHNICAL SPECIFICATIONS*Note: We do our best to ensure technical specifications are accurate, but they are subject to change. Frame Material: Carbon C Construction: Carbon C MX 150 mm travel, 4-Bar Travel: 150 mm Bike weight: 22.19 kg / 48.93 lbs Wheel size: MX Suspension Fork: FOX 38 Float Performance, Grip, 160 mm Shock: FOX Float X Performance, 205x60 Drivetrain Crankset: E13 Helix eSpec, 160 mm Rear derailleur: SRAM 90 Eagle T-Type, 12-speed Chain: SRAM GX Eagle T-Type, Flattop, 12-speed Cassette: SRAM XS 1275 Eagle T-Type, 10-52t Chainguide: OneUp Chainguide Bottom bracket: N/A Brakes Brakes: SRAM Maven Base Front rotor: SRAM HS2 200 mm Rear rotor: SRAM HS2 200 mm Cockpit Handlebar: OneUp Aluminum Bar Stem: OneUp Enduro Stem, 42 mm Grips: Santa Cruz House Grips Saddle: SDG Bel-Air V3, Max Lux-Alloy Dropper post: OneUp Dropper Post, 31.6 Headset: Cane Creek 10 IS Integrated Headset Wheels Front rim: Reserve 30|HD AL Rear rim: Reserve 30|HD AL Front hub: E13 SL, 15x110, 6-Bolt, 32h Rear hub: E13 SL E-Spec, 12x148, XD, 6-Bolt, 32h Front tire: Maxxis Assegai 29"x2.5", 3C MaxxGrip, EXO+ Rear tire: Maxxis Minion DHRII 27.5"x2.5", 3C MaxxTerra, DoubleDown Valves: Reserve Fillmore Valves E-Bike System Motor: Bosch Performance CX BDU38 Battery: Bosch PowerTube 600 Wh Geometry & Technical Specs Rear travel: 151 mm Suspension system: Four-bar Recommended sag: 30% Shock eye-to-eye: 205 mm Shock stroke: 60 mm Fork axle-to-crown: 571 mm Fork offset: 44 mm Headset: Integrated (IS41/52) UDH: Yes Derailleur hanger: No compatibility Max chainring: 36T Max rotor size: 220 mm Max tire width: 2.5" Rear axle spacing: 148 mm Seatpost diameter: 31.6 mm Clamp diameter: 36.4 mm Bottle cage mounts: 1

Wheels for 360° Everyday PerformanceThe Reserve 34|37 TA are the ideal wheelset for everything you do with your road bike. Wide and robust enough for gravel, yet at the same time light enough to tackle road climbs, these “Turbulent Aero” wheels are designed to find the perfect balance between weight, stability and aerodynamics. These wheels benefit from a wider and shallower front profile, paired with a narrower and taller rear wheel. Created in the wind tunnel and then tested on tarmac with professional teams, the 34|37 TA offer rapid acceleration and predictable handling in any condition. Features: Internal reinforcement – Reserve uses internally reinforced spoke holes to increase strength in the area that undergoes the greatest stress, namely around the spoke nipple. This allows improved robustness without adding unnecessary weight. Zero complications – The 34|37 are designed to be your carefree climbing wheelset. No weight limit, no restrictions on tires, and compatible with both tubeless and inner tube setups. Mixed profile – The differentiated front/rear profile of the 34|37 offers maximum stability, minimum weight and optimized aerodynamics. Includes a set of Reserve Fillmore valves Specifications: Weight: 1,280 g ERD: 573 mm (34) – 567 mm (37) Internal width: 22.8 mm front, 22 mm rear External width: 29.8 mm front, 29.5 mm rear Depth: 34 mm front, 37 mm rear Recommended tire size: from 25 to 38 mm Rim weight: 360 g (34), 385 g (37) Number of spokes: 24 Hub spacing: 12×100 mm / 12×142 mm Freehub body: HG Disc standard: Centerlock

SANTA CRUZ VALA 1 C 70 MX BIKE The Vala is a full-power ebike that offers precision and power. It is made for riders who seek targeted performance on the best trails. Perfectly balanced, with refined suspension and the best build quality, as always. SANTA CRUZ VALA 1 C 70 MX BIKE KEY FEATURES: RockShox Zeb Base fork FOX Float X Performance shock SRAM 70 Eagle T-Type drivetrain Technical specifications Frame: 29/27.5", Carbon C, 150 mm travel Motor: Bosch Performance CX BDU38, 100 Nm Display: Mini Remote Battery: Bosch PowerTube Battery 600 Wh Charger: Bosch Fork: RockShox Zeb Base, 160 mm Shock: FOX Float X Performance, 205x60 Drivetrain: SRAM 70 Eagle T-Type, 12-speed Front derailleur: / Shifter: SRAM Cassette: SRAM XS 1270 Eagle T-Type, 10-52T Chain: SRAM 70 Eagle T-Type, Flattop, 12-speed Chainring: / Crankset: E13 Helix eSpec, 160 mm Front brake: SRAM DB8, hydraulic disc brake, 4-piston Rear brake: SRAM DB8, hydraulic disc brake, 4-piston Rotors: SRAM Centerline, 220 mm / 200 mm Front tire: Maxxis Assegai 29"x2.5", 3C MaxxGrip, EXO+ Rear tire: Maxxis Minion DHRII 27.5"x2.5", 3C MaxxTerra DoubleDown Wheels: front Reserve 30|HD AL 29", rear Reserve 30|HD AL 27.5" Front hub: SRAM MTH 716, 15x110, 6-bolt, 32H Rear hub: SRAM MTH 746, 12x148, HG, 6-bolt, 32H Handlebar: Burgtec Alloy Bar or e13 TRS Base Bar Stem: OneUp Enduro Stem, 42 mm or e13 TRS Base Stem, 40 mm Saddle: SDG Bel-Air V3 Max Dropper post: SDG Tellis Dropper, 31.6 Maximum system weight: / Weight: 22.29 kg

SANTA CRUZ BEARINGS BEARING KIT V10 4.0 AND V10 5.0 Bearings compatible with: V10.4V10.5V10.6

SANTA CRUZ SYNDACATE MINNAAR TEE JERSEY Fit jersey made of breathable cotton, perfect both for a day in the saddle and for a giro in the city. Print with viso of Greg Minnaar on the back. FABRICS 100% cotton. ITEM CODE 55-22440-02-001 (Size S - Color: Black) / 55-22440-03-001 (Size M - Color: Black) / 55-22440-04-001 (Size L - Color: Black) / 55-22440-05-001 (Size XL - Color: Black)

Introducing the brand-new Reserve 30|DH: a wheelset engineered to withstand the most violent impacts, the most demanding terrains, and the toughest downhill tracks in the world. Developed with direct input from the Santa Cruz Syndicate and tested in a wide range of competitions—from Red Bull Hardline events to DH World Cup races—the 30|DH delivers the strength, reliability, and riding precision needed to push limits. Featuring a redesigned carbon structure for enhanced impact resistance and a refined profile for improved compliance, these wheels are built to handle any situation, from racing to bike park laps. If you’re looking for uncompromising durability without sacrificing speed, the Reserve 30|DH is ready for action. Designed for – Downhill and racing Hub spacing – DH: 20x110 front – 12x157 rear Spoke count – 28 front – 32 rear Wheelset weight – 29” DT 350 – 2036 g Rim weight – 29” front 585 g – rear 645 g – 27.5" front 540 g Internal width – 30 mm External width – 38 mm Rim depth – 20 mm Asymmetric offset – 3.6 mm ERD – 29” 599 mm – 27.5” 558 mm Recommended tire size – from 2.4” to 2.6” E-bike approved – Yes SANTA CRUZ RESERVE HD 30 MX DT 350 6 BOLT 110X157 XD KEY FEATURES: Rim width – 30 mm Rim height – 21 mm Hub – DT 350 Front / Rear – Set Brake type – 6-bolt Freehub – XD Wheel size – MX Material – Carbon

Telaio Carbon CC, cambio X0 AXS, freni Maven Silver e sospensioni Fox Factory.  Con 170 mm di escursione sia anteriore che posteriore, la Bullit è la scelta perfetta per chi cerca il brivido della discesa senza scendere a compromessi in salita. Potente, agile e resistente, è la e-bike pensata per i rider che vogliono superare ogni ostacolo. Spinta dal motore Bosch Performance Line CX, silenzioso e reattivo, trasforma ogni salita in un’esperienza entusiasmante, portandoti rapidamente dove iniziano i veri trail da downhill. Costruita per durare nel tempo, la Bullit è progettata con l’obiettivo di offrire maneggevolezza eccezionale e resistenza reale. Telaio robusto, giunzioni rinforzate e componenti di qualità evitano compromessi: niente peso inutile, solo design ottimizzato e affidabilità assoluta. Dettagli tecnici come il seatstay bridge, il link monopezzo e il tubo obliquo chiuso garantiscono rigidità e assenza di vibrazioni. Il chip di regolazione geometrica permette di personalizzare altezza del movimento centrale e angolo di sterzo, mentre il chip di progressione consente di adattare la risposta della sospensione da 26% a 29%. Con una geometria proporzionale, ogni taglia mantiene lo stesso equilibrio e controllo, per una guida sicura e performante su qualsiasi terreno. La versione CC X0 AXS è equipaggiata con cambio elettronico Sram X0 AXS, freni SRAM Maven Silver, ruote in carbonio Reserve e sospensioni Fox Factory. BICI SANTA CRUZ BULLIT 4 CC X0 AXS RSV CARATTERISTICHE PRINCIPALI: Diametro Ruota: 29/27,5. Velocità Cambio: 12. Motore: Bosch Batteria (Wh): 600 Escursione (mm): 170 SPECIFICHE TECNICHE Telaio: Carbon CC MX, 170mm Travel, 4-Bar, larghezza massima pneumatico: 27,5 x 2,5, freni Post Mount con dischi da 200mm, Santa Cruz UDH Motore: Bosch Performance Line CX Smart System (BDU38), 250W, picco 600W, 25 km/h, 85Nm Display: Bosch Batteria: Bosch PowerTube 600Wh Caricabatterie: Caricatore rapido 4A Forcella: Fox 38 Float Factory, Grip X2, 170mm Ammortizzatore: FOX Float X2 Factory, 205x65 Cambio: SRAM X0 Eagle AXS T-Type, 12 velocità Deragliatore: / Comando cambio: SRAM AXS Pod Controller Rocker Paddle, 12 velocità Pacco pignoni: SRAM X0 Eagle T-Type, 10-52D Catena: SRAM X0 Eagle T-Type, Flattop, 12 velocità Corona: / Pedivelle: E13 Helix eSpec, 155mm Freno anteriore: SRAM Maven Silver, 4 pistoni Freno posteriore: SRAM Maven Silver, 4 pistoni Dischi: SRAM HS2 200mm / SRAM HS2 200mm Copertone anteriore: Maxxis Assegai 29"x2.5", 3C, MaxxGrip, Double Down Copertone posteriore: Maxxis Minion DHRII 27.5x2.5, 3C DoubleDown Cerchi: Reserve 30|HD Mozzo anteriore: DT Swiss 350, 15x110, 6-Bolt, 28 fori Mozzo posteriore: DT Swiss 350 DEG, 12x148x XD, 6-Bolt, 72t, 32 fori Manubrio: Santa Cruz 35 Carbon Bar, 800mm, 20mm Rise (S), 35mm Rise (M-XXL) Attacco manubrio: OneUp Stem, 42mm Sella: SDG Bel-Air V3 Max Lux-Alloy Atmos Reggisella: WTB Silverado Medium Fusion, CroMo SL Peso massimo consentito: 150 kg Peso: 21,95 kg

Andiamo veloci. Andiamo lontano. Andiamo finché le tue gambe non saranno pronte a cedere, e poi andiamo ancora un po'. Facciamo in modo che ogni secondo conti. Ricaviamo giri dalle giornate impegnative e mettiamo quelle linee sulla mappa della tua lista delle cose fatte. Le ruote da 29 pollici e il telaio snello della Joplin galleggiano sui dossi ondulati con la stessa facilità con cui divora le sporgenze frastagliate. Una geometria creata per lunghe giornate in sella è fusa con 130 mm di escursione nella parte anteriore e 120 mm nella parte posteriore, creando una scalatrice capace che non sussulta quando le radici diventano irregolari e le rocce iniziano a rotolare. BICI SANTA CRUZ JULIANA JOPLIN 4 C GX AXS CARATTERISTICHE PRINCIPALI: Abbiamo imitato la nostra geometria a escursione più lunga per creare una bici con un angolo di sterzo di 65,5 gradi, un centro anteriore generoso e una forcella con offset corto.120 mm di sospensione VPP azionata dal collegamento inferiore sono progettati per gestire salite difficili e tuttavia affrontare discese ad alta velocità. La ridotta resistenza al rotolamento e l'impronta più ampia delle ruote da 29 pollici ispirano sicurezza e aiutano i ciclisti a coprire il terreno in modo efficiente.Geometria proporzionale: l'angolazione del tubo sella si inclina e il centro posteriore aumenta con l'aumentare delle dimensioni del telaio.Cassetto portaoggetti: contiene tutti gli oggetti essenziali in modo da poter abbandonare lo zaino durante i giri di pausa pranzo o essere sempre pronto con la dose. SPECIFICHE TECNICHE Materiale Telaio: Carbon C 29" 120mm Travel VPP™ Ammortizzatore: FOX Float Performance Elite DPS 190x45 Forcella: RockShox Pike Select+, 130mm Cambio: SRAM GX AXS Eagle, 12spd Comandi: GX AXS Controller Cassetta: SRAM XG1275 Eagle, 12spd, 10-50t Catena: SRAM GX Eagle, 12spd Movimento Centrale: SRAM DUB 68/73mm Threaded BB Serie Sterzo: Cane Creek 40 IS Integrated Headset Copertone Posteriore: Maxxis Rekon 29"x2.4"WT, 3C MaxxTerra, EXO, TR Copertone Anteriore: Maxxis Dissector 29"x2.4"WT, 3C MaxxTerra, EXO, TR Mozzo Anteriore: i9 1/1, 15x110, Torque Cap, 28h Cerchio Anteriore: RaceFace ARC Offset 30 29" Mozzo Posteriore: i9 1/1, 12x148, XD, 28h Cerchio Posteriore: RaceFace ARC Offset 30 29" Disco Anteriore: Avid Centerline 180mm Disco Posteriore: Avid Centerline 180mm Freni: SRAM G2 RS Guarnitura: SRAM GX Eagle 148 DUB, 32t Manubrio: Santa Cruz 20 Carbon Bar, 760mm Attacco Manubrio: Burgtec Enduro MK3, 42mm Sella: WTB Silverado Medium CroMo Reggisella: RockShox Reverb Stealth, 31.6 Manopole: Juliana House Grips

SANTA CRUZ WARDEN TEE 2.0 JERSEY Super comfortable Santa Cruz T-shirt perfect to wear both in bici and for a giro in the city. FABRICS 100% cotton

SANTA CRUZ SCB PATCH CREW SWEATSHIRT Crewneck sweatshirt inspired by workwear with Santa Cruz label sewn on the chest. Regular fit. FABRICS 100% cotton French Terry ITEM CODE 53-19930-05-002

Santacruz Stigmata 2 Derailleur Hanger The Santacruz Stigmata 2 hanger is the derailleur hanger in aluminum, including screws, for the Santacruz Stigmata frame.

SANTA CRUZ HIGHTOWER 3 CC X0 AXS 29 BIKE The new version of the Hightower remains our best engineering achievement – now further refined and focused into our ultimate all-terrain bike. Big wheels, medium travel and little complexity: this is the model that does everything, repeatedly, thanks to a versatile balance of geometry, specs and durability. If you’re not looking for the extreme, but just something extremely buono, the Hightower is the elevator for you. Engineering Details: The Engineers’ Best Results Not all frames are created equal. The Hightower represents Santa Cruz’s best results, showcasing our ability in design, engineering and performance. Lower Link Assembly The highly sculpted and optimized Lower Link (A) houses a Flip Chip (B) that adjusts the geometry and robust pivot axles (C) to practically eliminate lateral flex. Upper Link Assembly We use only high-quality Enduro MAX or TPX sealed bearings (A) and premium bolts (B) for our suspension assemblies. They are easy to torque correctly and to maintain, and we also offer free bearing replacement for vita. One-Piece Swingarm The VPP suspension uses a one-piece swingarm that eliminates the need for pivoti on it, creating a robust, indestructible rear end for precise tracking and superior performance. CC Carbon Santa Cruz offers high-gamma CC Carbon, which is lighter and paired with more premium suspension. Carbon Mastery The Sag window (A), the Glovebox (B) and the internal cable tunnels (not shown) demonstrate Santa Cruz’s expertise in combining practical functionality with carbon design and manufacturing artistry. The Somma of the Parts On their own, tutte these features are fantastic; put together with obsessive suspension tuning, premium construction and meticulous attention to dettagli, they diventa transcendent. SRAM Eagle Drivetrain – Stronger, Better Shifting, Wireless The new generation of the SRAM Eagle drivetrain, mounted on our CC Carbon models, is a robust, fully integrated and interdependent wireless drivetrain. Built around the universal wheel axle concept, the hangerless Full Mount interface creates a much stronger connection to the frame and the super-tough derailleur offers unprecedented strength. Shifting under load is possible thanks to X-SYNC technology and cassette mapping, creating smooth shifts even under maximum effort. The new AXS Pods are extremely ergonomic and highly customizable, so shifting is easy and intuitive. It’s simply the most advanced drivetrain and quasi as tough as the mountain itself. SANTA CRUZ HIGHTOWER 3 CC X0 AXS 29 BIKE KEY FEATURES: 145mm VPP travel – Looking for something that climbs, descends and rips your local trails? Welcome the Hightower. 145mm of rear travel paired with 150mm up front is the perfect combination. Suspension sensitivity – Compared to the previous Hightower model, we have reduced anti-squat in the first 40% of the travel. This greatly improves suspension sensitivity both on climbs and descents by reducing chain influence on the suspension. Suspension consistency – The Hightower’s leverage curve is relatively linear, with added progression towards the fine of the stroke. This provides better bottom-out resistance with more consistent damping and support. Glovebox – Safely store essential accessori for your ride under a new high-quality latch and panel in the Hightower’s down tube. The Glovebox comes with a tool wallet and tube purse, designed for the frame to keep your gear close at hand. CC carbon frame – CC carbon frames use the best materials and manufacturing processes available, are made in our factory and come with a lifetime warranty. Sag window – A window allows easier setup of suspension sag. The dettagli are rounded out by an elegant mudflap to protect the rear shock, neat cable routing inside the frame and swingarm, and DT rubber protectors to fend off impacts. Flip Chip – In the low position, the compression rate diventa more progressive, particularly towards the fine of the travel, with a bit more bottom-out resistance. In the high position, the bike sits a little higher in its travel and offers the rider more mid-stroke support. Experienced and picky riders can tailor suspension behavior to their own needs and desires. Proportional geometry – Chainstay length and seat angle are matched to frame size, so every rider, regardless of height, gets the same balanced geometry. However, on tutte sizes, the head tube angle has been slackened to improve high-speed stability, the bottom bracket has been lowered to better support the suspension, and stack has been increased to favor modern handlebar setups. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Component Description Fork RockShox Lyrik Ultimate, 150mm Mozzi Front: Industry Nine 1/1, 15x110, Torque Cap, 6-Bolt, 28hRear: Industry Nine 1/1, 12x148, XD, 6-Bolt, 28h Rims Front: RaceFace ARC Offset 30 29"Rear: RaceFace ARC Offset 30 29" Stem Burgtec Enduro MK3, 42mm Chain SRAM X0 Eagle T-Type, Flattop, 12spd Tyres Front: Maxxis Minion DHR II 29"x2.4", 3C MaxxGrip, EXORear: Maxxis Minion DHR II 29"x2.4", 3C MaxxTerra, EXO Brakes SRAM Code Silver Stealth Brake rotors SRAM HS2 180mm Sella WTB Silverado Medium, Ti Headset Cane Creek 40 IS Integrated Headset Crankset SRAM X0 Eagle DUB T-Type Crankset, 32t Seatpost OneUp V2 Dropper Post, 31.6 Shifter SRAM AXS Pod Bridge Handlebar Santa Cruz 35 Carbon Bar, 800mm Rear shock RockShox Super Deluxe Ultimate, 210x55 Tape/Grips Santa Cruz Bicycles House Grips Bottom bracket SRAM DUB 73mm MTB Wide BB Rear derailleur SRAM X0 Eagle AXS T-Type, 12spd Accessori e Extra SRAM eTap Powerpack 1 Battery Cassette SRAM X0 Eagle T-Type, 10-52t *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

Con 170 mm di escursione sia anteriore che posteriore, la Bullit è la scelta perfetta per chi cerca il brivido della discesa senza scendere a compromessi in salita. Potente, agile e resistente, è la e-bike pensata per i rider che vogliono superare ogni ostacolo. Spinta dal motore Bosch Performance Line CX, silenzioso e reattivo, trasforma ogni salita in un’esperienza entusiasmante, portandoti rapidamente dove iniziano i veri trail da downhill. Costruita per durare nel tempo, la Bullit è progettata con l’obiettivo di offrire maneggevolezza eccezionale e resistenza reale. Telaio robusto, giunzioni rinforzate e componenti di qualità evitano compromessi: niente peso inutile, solo design ottimizzato e affidabilità assoluta. Dettagli tecnici come il seatstay bridge, il link monopezzo e il tubo obliquo chiuso garantiscono rigidità e assenza di vibrazioni. Il chip di regolazione geometrica permette di personalizzare altezza del movimento centrale e angolo di sterzo, mentre il chip di progressione consente di adattare la risposta della sospensione da 26% a 29%. Con una geometria proporzionale, ogni taglia mantiene lo stesso equilibrio e controllo, per una guida sicura e performante su qualsiasi terreno. La versione C GX AXS è equipaggiata con cambio elettronico Sram GX AXS, freni SRAM Maven bronze, ruote in alluminio e sospensioni Fox nella versione Elite. BICI SANTACRUZ BULLIT 4 C GX AXS CARATTERISTICHE PRINCIPALI: Diametro Ruota: 29/27,5 Velocità Cambio: 12 Motore: Bosch Batteria (Wh): 600 Escursione (mm): 170 Telaio: Carbon C MX 170mm Travel, 4-Bar, Max tire width: 27.5 x 2.5, Post mount brakes w/ 200mm rotors, Santa Cruz UDH Motore: Bosch Performance Line CX Smart System (BDU38), 100Nm Display: Bosch Batteria: Bosch PowerTube Battery 600Wh Caricabatterie: Caricatore Rapido, 4A Forcella: Fox 38 Float Performance Elite, Grip X2, 170mm Ammortizzatore: FOX Float X Performance Elite, 205x65 Cambio: SRAM GX Eagle AXS T-Type, 12v Comando cambio: SRAM AXS Pod Bridge, 12v Pacco pignoni: SRAM XS 1275 Eagle T-Type, 10-52D Catena: SRAM GX Eagle T-Type, Flattop, 12v Pedivelle: E13 Helix eSpec, 155mm Freno anteriore: SRAM Maven Bronze, 4 pistoni Freno posteriore: SRAM Maven Bronze, 4 pistoni Dischi: SRAM HS2 200mm / SRAM HS2 200mm Copertone anteriore: Maxxis Assegai 29"x2.5", 3C, MaxxGrip, Double Down Copertone posteriore: Maxxis Minion DHRII 27.5x2.5, 3C DoubleDown Cerchi: Reserve 30|HD AL 6069 Mozzo anteriore: E13 SL, 12x110, 6-Bolt, 32h Mozzo posteriore: E13 SL E-Spec, 12x148, XD, 6-Bolt, 32h Manubrio: Burgtec Aluminum Bar, 800mm, 20mm Rise (S), 35mm Rise (M-XXL) Attacco manubrio: OneUp Stem, 42mm Sella: SDG Bel-Air V3 Max Lux-Alloy Atmos Reggisella: OneUp V3 Dropper Post, 31.6 Peso massimo consentito: 150 kg Peso: 22,41 kg

STIGMATA 4 FORCE-1x RSV Brick Red 700c SM The STIGMATA 4 FORCE-1x RSV Brick Red 700c SM by SANTACRUZ is a gravel bike born from racing DNA and refined for long days on mixed terrain. Agile like a road bike yet confident on dirt and singletrack, it is designed for riders who want to explore beyond the tarmac without sacrificing speed and precision. The elegant Brick Red finish highlights a modern carbon frame engineered to be light, responsive and comfortable, whether you are tackling fast gravel races, epic bikepacking adventures or winter training rides. With its 1x SRAM Force drivetrain and high-end Reserve carbon wheels, this STIGMATA build delivers reliable performance, crisp shifting and excellent rolling efficiency, turning every ride into an opportunity to push further. STIGMATA 4 FORCE-1x RSV Brick Red 700c SM main features: High-performance SANTACRUZ STIGMATA 4 carbon frame, optimized for gravel and all-road riding SRAM Force 1x drivetrain for precise, reliable shifting and a clean, quiet setup Reserve carbon wheelset (700c) for low weight, stiffness and fast acceleration Versatile geometry that balances race-ready responsiveness with long-distance comfort Brick Red colorway for a distinctive, premium look on and off the road 700c wheel format ideal for fast gravel, compact dirt and efficient road sections Size Small (SM), designed to offer optimal fit and control for smaller riders Ample tire clearance to run wider gravel tires for extra grip and comfort Multiple mounting points for bottles and accessories, perfect for long rides and bikepacking Internal cable routing for a clean aesthetic and better protection from dirt and debris

The wheels are without doubt the most important component of your mountain bike, which is why we have developed a completely new line of aluminum Reserve wheels for trail, enduro and e-bikes. The aluminum Reserve wheels have been designed and developed to offer a product that rivals the performance of our much-loved carbon wheels, but at a much more accessible price. And with our industry-leading lifetime garanzia a vita, you can be sure you will enjoy these wheels for many years to come. RESERVE 30 HD AL DT350 90T XD 6-BOLT MX WHEELS MAIN FEATURES: Fillmore Standard valves: our patented Fillmore valve represents a revolutionary step forward in technology, with a high-flow design that makes tubeless installation easier and eliminates the traditional valve core, delicate and prone to clogging. Tested and approved: after over a year of road and laboratory test, the 30|HD AL wheels are designed to withstand any stress. Like all Reserve wheels, they are covered by a garanzia a vita. Asymmetric design: asymmetric rims, like those of the 30|HD AL, make the wheels stiffer, stronger and more reliable, improving bracing angles and equalizing spoke tension between the drive side and the non-drive side. Wheelset weight (MX): DT 350 - 1960 g Designed for: trail, all mountain, enduro, e-bike Internal width: 30 mm Depth: 22 mm Rim weight: 29 580 g, 27.5 540 g Recommended tire sizes: from 2.2 to 2.6 Number of spokes: 32 Spokes: J-bend with aluminum nipples Brake rotor: 6-bolt

SANTA CRUZ HECKLER SL 1 C S MX BIKE A stealthy, lightweight, powerful e-bike with surprising range. All the trail features of a Santa Cruz combined with the FAZUA RIDE 60 drive unit. 150 mm of legendary VPP™ suspension, mixed 29/27.5'' wheels and progressive geometry make the Heckler SL a trail bike with natural handling. Only with the added power of an e-bike. SANTA CRUZ HECKLER SL 1 C S MX BIKE MAIN FEATURES: Wheel diameter: 29/27.5. Gears: 12. Motor: Fazua. Battery (Wh): 430. Travel (mm): 160. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: 29/27.5", Carbon C, 150mm travel Motor: Fazua Ride 60, 60Nm Display: Fazua LED Hub + Ring Control Battery: Fazua 430Wh Charger: Fazua Fork: FOX 36 Float Performance, Grip, 160mm Shock: Fox Float X Performance, 210x55 -or- RockShox Super Deluxe Select+, 210x55 Rear derailleur: SRAM GX Eagle, 12s Front derailleur: / Shifter: SRAM GX Eagle Single Click Cassette: SRAM XG1275 Eagle, 10-50T Chain: SRAM GX Eagle Chainring: / Crankset: E13 Helix eSpec, 165mm Front brake: SRAM Maven Bronze Stealth, hydraulic disc brake, 4 pistons Rear brake: SRAM Maven Bronze Stealth, hydraulic disc brake, 4 pistons Rotors: SRAM HS2, 200mm / SRAM HS2, 200mm Front tire: Schwalbe Albert, 29x2.5, Trail Radial Ultra Soft Rear tire: Schwalbe Albert, 27.5x2.5, Trail Radial Soft Rims: front RaceFace AR Offset 30, 29", rear RaceFace AR Offset 30, 27.5" Front hub: E13 SL, 15x110, 6-Bolt, 32h Rear hub: E13 SL E-Spec, 12x148, XD, 6-Bolt, 32h Handlebar: OneUp Aluminum Bar, 35mm rise, 800mm Stem: Burgtec Enduro MK3, 42mm Saddle: SDG Bel-Air V3, Max Lux-Alloy -or- WTB Volt Seatpost: OneUp Dropper Post, 31.6 Maximum permitted weight: / Weight: 19.76 kg *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, GEARS AND BRAKES ARE ALREADY MOUNTED

SANTA CRUZ BRONSON 4.1 C GX AXS BIKE "If in doubt, take a Bronson out": the bike with 150 mm of travel is capable of soaking up any landing and the VPP™ suspension design ensures there is no wasted energy when you climb back up for another run.If you appreciate speed style or want to have fun feeling fast, the mixed wheels (29" front, 27.5" rear) are perfect for you. The larger front wheel offers greater traction and stability that will make you feel more confident squaring off turns and diving into inside lines. But the 27.5-inch rear tire means this bike still loves to pop wheelies and take off into the air. MAIN FEATURES OF THE SANTA CRUZ BRONSON 4.1 C GX AXS BIKE: Carbon C frame. MX wheels. Front travel 160 mm. Rear travel: 150 mm. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Carbon C. FORK: fox 36 Float performance Elite, 160mm. SHOCK: rockshox Super Deluxe select+ 230x60. REAR DERAILLEUR: sram GX AXS Eagle, 12spd. SHIFTER: GX AXS Controller. BRAKE LEVER: sram Code rs. CASSETTE: sram XG1275 Eagle, 12spd, 10-50t. HANDLEBAR: santa cruz 35 Carbon Bar, 800mm. STEM: Burgtec Enduro MK3, 42mm. sella: wtb Silverado Medium CroMo. SEATPOST: rockshox Reverb Stealth, 31.6. WHEELS: "raceface ARC Offset 30 29"" / raceface ARC Offset 30 27.5""". TIRES: "maxxis Minion DHF 29""x2.5""WT, 3C MaxxGrip, EXO, TR / maxxis Minion DHR II 27.5""x2.4"", 3C MaxxTerra, EXO, TR". HEADSET: cane creek 40 IS Integrated Headset. CHAIN: sram GX Eagle, 12spd. BOTTOM BRACKET: sram DUB 68/73mm Threaded bb. FRONT HUB: i9 1/1, 15x110, 28h. REAR HUB: i9 1/1, 12x148, XD, 28h. FRONT ROTOR: avid Centerline 200mm. REAR ROTOR: avid Centerline 180mm. GRIPS: santa cruz Bicycles House Grips. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED ITEM CODE 192219287058 (Size SM - Color: black) / 192219287171 (Size XL - Color: black)192219287072 (Size SM - Color: Salmon) / 192219287119 (Size MD - Color: Salmon) / 192219287157 (Size lg - Color: Salmon) / 192219287195 (Size XL - Color: Salmon)

SANTA CRUZ HIGHTOWER 4 C S BIKE The brand-new HIGHTOWER 4 C S carries with it the essence of freedom and adventure. Designed to tackle the most demanding terrains, this mountain bike will allow you to experience exciting adventures in the heart of nature. SANTA CRUZ HIGHTOWER 4 C S BIKE main features: C carbon fiber frame optimized to ensure lightness and strength VPP rear suspension with 140 mm travel for excellent shock absorption 29-inch wheels for greater stability and control on technical terrain Sram GX Eagle 12-speed groupset for high-level performance Gloss Day Green color that gives it a unique and eye-catching look THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame Material: Carbon C Maximum Fork Travel: 150mm Wheel Size: 29 Shock: FOX Float X Performance, 230x57.5 Fork: FOX 36 Float Performance, Grip, 160mm Rear Derailleur: SRAM GX Eagle, 12spd Shifters: SRAM GX Eagle, 12spd Cassette: SRAM XG1275 Eagle, 12spd, 10-50t Chain: SRAM GX Eagle, 12spd Bottom Bracket: SRAM DUB 68/73mm Threaded BB Headset: Cane Creek 40 IS Integrated Headset Rear Tire: Maxxis Minion DHR II 29"x2.4", 3C MaxxTerra, EXO+ Front Tire: Maxxis Minion DHF 29"x2.5"WT, 3C MaxxGrip, EXO Front Hub: DT Swiss 370, 12x110, 6-Bolt, 28h Front Rim: Raceface AR30 Rear Hub: DT Swiss 370, 12x148, XD, 6-Bolt, 36t, 28h Rear Rim: Raceface AR30 Front Rotor: SRAM HS2 200mm Rear Rotor: SRAM HS2 200mm Brakes: SRAM DB8 Stealth Crankset: SRAM GX Eagle 148 DUB 32t Handlebar: OneUp Aluminum Bar, 35mm Rise, 800mm Stem: OneUp Stem, 42mm -or- Burgtec Enduro Stem, 42mm Saddle: SDG Bel-Air V3, Lux-Alloy Seatpost: OneUp Dropper Post, 31.6 - S - 120mm, M - 150mm, L - 180mm, XL - 210mm, XXL - 210mm Grips: Santa Cruz Bicycles House Grips *PRO-M STORE OFFERS A FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

SANTA CRUZ NOMAD 6 CC X0 AXS 2025 Load it onto the van, hit the road, climb a mountain and come back down at tutto gas, launching yourself over the road gap. Put the bike back in the van, go to the bike park and do lap after lap. Hell, with this bike you could even afford to pedal up to the trailhead. The strong point of the Nomad is being ready and willing to go anywhere, anytime. The only thing it needs is a rider willing to do it. Technical Specifications: MaterialCarbon CC Travel170mm Wheel diameterMX ShockFox Float X2 Factory, 230x65 ForkFOX 38 Float Factory Elite, Grip X2, 170mm -or- RockShox Zeb Ultimate, 170mm Rear derailleurSRAM X0 Eagle AXS T-Type, 12spd Right shifterSRAM AXS Pod Controller Rocker Paddle CassetteSRAM X0 Eagle T-Type, 10-52t ChainSRAM X0 Eagle T-Type, Flattop, 12spd ChainguideOneUp Bash Guide Bottom bracketSRAM DUB 73mm MTB Wide BB HeadsetCane Creek 40 IS Integrated Headset Rear tireMaxxis Minion DHR II 27.5"x2.4", 3C MaxxTerra, Double Down Front tireMaxxis Assegai 29"x2.5", 3C MaxxGrip, EXO+ Front hubIndustry Nine 1/1, 15x110, 6-Bolt, 28h Front rimRaceface ARC 30 HD Rear hubIndustry Nine 1/1, 12x148, XD, 6-Bolt, 32h Rear rimRaceface ARC 30 HD Front rotorSRAM HS2 200mm Rear rotorSRAM HS2 200mm BrakesSRAM Maven Silver Stealth CranksetSRAM X0 Eagle DUB T-Type Crankset, 32t HandlebarSanta Cruz 35 Carbon Bar, 800mm StemBurgtec Enduro MK3, 42mm SellaWTB Silverado Medium Fusion, CroMo SL SeatpostOneUp Dropper Post, 31.6 GripsSanta Cruz Bicycles House Grips ChargerSRAM eTap Powerpack 1 Battery & Charger

No compromises. Only maximum World Cup speed and performance. The eighth generation of the Santa Cruz V10 is the exact same bicycle used by the Syndicate champions to conquer the top step of the podium in the World Cup. Fully refined and studied down to the smallest detail, the new V10 is designed for riders who accept no limits, want to emulate their idols, or aim for the most ambitious goals. Nothing compares to the precision and capability of a true pure Downhill mountain bike: lap after lap, track after track, you will discover that there is no more resistant, stiff, and high-performing machine to dominate the most extreme tracks. SANTA CRUZ V10 8 CC S DH MX BIKE MAIN FEATURES: Frame and Suspension: Carbon CC frame with 208 mm of travel managed by the iconic and highly effective VPP™ system, paired with a 200 mm RockShox BoXXer Base fork and RockShox Vivid Select+ coil shock. MX Wheel Configuration (Mullet): Perfect combination of a 29" front wheel for maximum obstacle rollover and a 27.5" rear wheel for superior handling and agility in technical sections. DH-Specific Drivetrain: SRAM GX DH 7-speed groupset, engineered for precise, fast, and durable shifting even under the heaviest stresses. High-Performance Braking System: SRAM Maven Bronze hydraulic brakes paired with large-diameter SRAM HS2 rotors (220 mm front / 200 mm rear) for exceptional and consistent stopping power. Pro-Level Components: Industry Nine 1/1 Boost hubs with high engagement, high-strength rims, and Maxxis Minion DHR II tires with 3C MaxxGrip compound and DH casing. TECHNICAL SPECIFICATIONS Component Technical Specification Frame Carbon CC MX, 208mm Travel VPP™ Fork RockShox BoXXer Base, 200mm Rear Shock RockShox Vivid Select+ Coil Rear Derailleur SRAM GX DH, 7s Shifter SRAM GX, 7s Cassette SRAM PG720 DH, 11-25T Chain SRAM PC1110, 11s Crankset and Chainring SRAM Descendant DH (165mm), 36T Chainring Brakes SRAM Maven Bronze Brake Rotors SRAM HS2 (Front 220mm / Rear 200mm) Front Tire Maxxis Minion DHR II 29"x2.5", 3C MaxxGrip, DH (or Maxxis Assegai 2.5", 3C MaxxGrip) Rear Tire Maxxis Minion DHR II 27.5"x2.5", 3C MaxxGrip, DH Rims Reserve 30 HD AL 6069 (or RaceFace ARC 30 HD) Front Hub Industry Nine 1/1, 20x110 Boost, 32 holes Rear Hub Industry Nine 1/1, 12x157, HG, 32 holes Handlebar OneUp Aluminum Bar Stem OneUp Direct Mount Stem Saddle Fizik Alpaca Gravita X5 Seatpost RaceFace Chester Total Weight 16.69 kg ADDITIONAL DETAILS AND COMPATIBILITY Geometry & Size: Size 45.5, ideal for ensuring maximum stability at high speeds and precise control in jumps and technical terrain. Hub Standards: Front 20x110 Boost / Rear 12x157 mm for flawless wheel torsional stiffness. MX Wheel Configuration: Natively compatible with a 29" front wheel and a 27.5" rear wheel to optimize the downhill riding position. Intended Use: Downhill / Gravity / Bike Park (Unisex Gender).

The Santa Cruz V10 8 DH X01 CC 2027 is the ultimate downhill mountain bike for those seeking maximum performance, speed, and absolute control on the most extreme trails. Developed with the expertise of the Santa Cruz Syndicate team, this bike represents the benchmark in the DH category, combining advanced technology, premium materials, and geometry designed to tackle jumps, rock gardens, and high-speed descents. Carbon CC Frame and VPP™ Technology The heart of the V10 is the Carbon CC frame, crafted with high-performance carbon fibers to offer the best balance of lightness, stiffness, and impact resistance. The VPP™ (Virtual Pivot Point) suspension has been optimized for downhill riding and ensures: maximum traction even on the roughest terrains high sensitivity to small bumps stability at high speeds controlled progressivity in the final part of the travel With 208 mm of rear travel, the Santa Cruz V10 allows you to tackle the most technical sections while maintaining precision and control. Mullet 29"/27.5" Configuration The mullet configuration combines a 29-inch front wheel with a 27.5-inch rear wheel, offering the perfect compromise between speed, stability, and agility. 29" front wheel: greater ability to overcome obstacles and stability in fast sections 27.5" rear wheel: greater reactivity in changes of direction and tight turns FOX Factory Competition Suspension The V10 8 DH X01 CC is equipped with FOX Factory suspension designed to offer maximum control during downhill riding. FOX 40 Float Factory Grip X2 fork with 203 mm travel FOX DHX2 Factory Coil shock absorber A racing setup that allows for precise adjustments, great shock absorption, and consistently predictable behavior even on the most demanding descents. SRAM X01 DH 7-speed Drivetrain The SRAM X01 DH 7V groupset guarantees fast shifts, reliability, and durability in the most extreme conditions. precise shifting under pressure high impact resistance components specifically developed for downhill The SRAM X01 DH DUB 83 mm crankset completes a drivetrain designed to tackle aggressive descents and intensive bike park sessions. SRAM Code Brakes: Power and Modulation To manage the V10's speed, powerful and reliable brakes are needed. The SRAM Code Silver Stealth system offers high performance and precise braking control. SRAM HS2 220 mm front disc SRAM HS2 200 mm rear disc excellent heat management on long descents precise modulation of braking power Reserve Wheels and Maxxis Tires The wheel setup is designed to ensure strength, grip, and reliability even in the most difficult conditions. Reserve 30 HD AL 6069 / Race Face ARC 30 HD rims Industry Nine 1/1 hubs Maxxis Minion DHR II 29x2.5" and 27.5x2.5" 3C MaxxGrip DH tires The Maxxis tread offers exceptional grip when braking and cornering, even on wet or very technical terrain. Cockpit Components and Premium Details OneUp Aluminum Bar handlebar OneUp Direct Mount stem Fizik Alpaca Gravita X5 saddle Burgtec Aluminum 31.6 mm seatpost Every component has been chosen to ensure maximum control, reliability, and comfort during the most demanding descents. Key Features Frame material: Carbon CC Suspension system: VPP™ Downhill Rear travel: 208 mm Fork: FOX 40 Float Factory Grip X2 203 mm Shock: FOX DHX2 Factory Coil Wheels: Mullet 29"/27.5" Drivetrain: SRAM X01 DH 7-speed Brakes: SRAM Code Silver Stealth Tires: Maxxis Minion DHR II DH 3C MaxxGrip Color: Gloss Liquid Blue Size: M Who it's for The Santa Cruz V10 8 DH X01 CC 2027 is designed for experienced riders, competitors, and downhill enthusiasts who want a no-compromise bike for: downhill races bike parks technical alpine descents high-speed trails A true racing machine built to push limits and tackle every line with confidence and precision. Technical Specifications Frame: Carbon CC MX, 208 mm Travel with VPP™ technology Fork: FOX 40 Float Factory Grip X2, 203 mm Shock: FOX DHX2 Factory Coil Rear Derailleur: SRAM X01 DH, 7-speed Shifter: SRAM X01 DH, 7-speed Cassette: SRAM X01 DH 11-25T Chain: SRAM PC1170, 11-speed Chainring: 36T Crankset: SRAM X01 DH DUB 83, 165 mm Front Brake: SRAM Code Silver Stealth Rear Brake: SRAM Code Silver Stealth Rotors: SRAM HS2 220 mm front / SRAM HS2 200 mm rear Front Tire: Maxxis Minion DHR II 29"x2.5", 3C MaxxGrip DH or Maxxis Assegai 29"x2.5", 3C MaxxGrip Rear Tire: Maxxis Minion DHR II 27.5"x2.5", 3C MaxxGrip DH Rims: Reserve 30 HD AL 6069 or Race Face ARC 30 HD Front Hub: Industry Nine 1/1, 20x110 Boost, 32 hole Rear Hub: Industry Nine 1/1, 12x157, XD, 32 hole Handlebar: OneUp Aluminum Bar Stem: OneUp Direct Mount Stem Saddle: Fizik Alpaca Gravita X5 Seatpost: Burgtec Aluminum Post 31.6 mm Weight: 16.15 kg

The Reserve 30|HD DH 29" wheelset was designed for riders seeking maximum reliability, strength, and control in the most extreme disciplines such as Downhill, Bike Park, and DH races. This wheelset is built to tackle jumps, harsh landings, and technical terrain without compromise, offering high performance and exceptional durability. The high-strength aluminum rim combines robustness with precise handling, featuring a structure designed to withstand the impacts typical of gravity riding. The asymmetric profile improves spoke tension balance, increasing lateral stiffness, reliability, and bike control in the most demanding sections. The system is equipped with DT Swiss 350 DEG DF hubs, synonymous with reliability and smooth rolling, paired with a 6-bolt disc mount and compatibility with SRAM XD 12-speed drivetrains. The configuration with a 20x110 mm DH front axle and a 12x157 mm rear axle ensures the maximum stiffness required by modern downhill bikes. Thanks to its 30 mm internal width, the Reserve 30|HD DH provides ideal support for tires from 2.4" to 2.6", enhancing stability, grip, and absorption capabilities on the most aggressive trails. The Tubeless Ready technology also reduces the risk of punctures and increases comfort and traction. Main Features Usage: Downhill, DH Racing, Bike Park Wheel Size: 29" Rim Material: Aluminum Internal Width: 30 mm External Width: 33 mm Rim Height: 22 mm Asymmetric Offset: 3 mm Hubs: DT Swiss 350 DEG DF Front Axle Standard: 20x110 mm DH Rear Axle Standard: 12x157 mm Disc Mount: 6-bolt IS Number of Spokes: 32 Freehub: SRAM XD 12-speed Approximate Pair Weight: around 2050 g Tire Compatibility: 2.4" - 2.6" Why choose Reserve 30|HD DH? The Reserve 30|HD DH represents an ideal solution for those who want a durable and high-performance gravity wheel without necessarily switching to carbon. The robust construction, reinforced aluminum rim, and proven DT Swiss hubs ensure a perfect balance between weight, stiffness, and long-term durability. Perfect for transforming a downhill bike into a race machine ready to tackle any line, from bike park trails to the most demanding competitions.