Hope
HOPE TECH4 V4 BRAIDED FRONT BRAKE
€220,94
€339,90
HOPE TECH4 V4 BRAIDED FRONT BRAKE
The HOPE TECH4 V4 BRAIDED FRONT BRAKE replaces the Tech 3 and is compatible with all Hope calipers. The new master cylinder can be used both in combinazione with the four calipers of the previous model, namely X" Cross Country, E4 Enduro, V4 Downhill and TrialZone for trials. Braking power has been increased by 30%, and this has been made possible both through a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned on the lever pivot, allows for a lighter return spring and makes the use of the brakes less tiring on descents. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated in modo that they can accommodate hybrid stainless-steel pistons with phenolic insert for movimenti that are even smoother and with less maintenance. The brake is sold with Racing organic compound pads designed for minimal fade and maximum power.
HOPE TECH4 V4 BRAIDED FRONT BRAKE MAIN FEATURES:
More power than the Tech 3.
Even more ergonomic lever.
Hinged clamp to reduce weight.
Hybrid piston design.
CNC rigida caliper in un unico piece.
Braking power increased by 30%.
Pads with Racing compound.
Hope
HOPE TECH4 V4 REAR BRAKE SILVER
€220,94
€339,90
HOPE TECH4 V4 SILVER REAR BRAKE
The HOPE TECH4 V4 SILVER REAR BRAKE replaces the Tech3 model, and the new master cylinder can be used in combination with the four calipers of the previous model, namely X2 Cross Country, E4 Enduro, V4 Downhill and TrialZone for trials. Braking power has been increased by 30%, made possible both by a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned in the lever pivot, allows for a lighter return spring and makes using the brakes on descents less fatiguing. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated so they can accommodate hybrid pistons in stainless steel with phenolic insert for even smoother movimenti and reduced maintenance. The brake is sold with Racing compound organic pads designed for minimum fade and maximum power.
HOPE TECH4 V4 SILVER REAR BRAKE MAIN FEATURES:
Greater power compared to the Tech 3.
Even more ergonomic lever.
Hinged clamp to reduce weight.
Hybrid piston design.
Pinza rigida CNC in un unico pezzo.
Braking power increased by 30%.
Pads with Racing compound.
Hope
HOPE FRONT BRAKE TECH4 V4 SILVER
€220,94
€339,90
FRENO HOPE FRONT TECH4 V4 SILVER
The brand new FRENO HOPE FRONT TECH4 V4 SILVER, which replaces the Tech3, is compatible with Hope calipers and the master cylinder can be used in combination with the four calipers of the previous model, namely X" Cross Country, E4 Enduro, V4 Downhill and TrialZone for trials. Braking power has been increased by 30%, and this has been made possible both through a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned on the lever pivot, allows for a lighter return spring and makes using the brakes less tiring on descents. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated in modo to accommodate hybrid pistons in stainless steel with phenolic insert for movimenti that are even smoother and require less maintenance. The brake is sold with Racing organic compound pads designed for minimum fade and maximum power.
FRENO HOPE FRONT TECH4 V4 SILVER MAIN FEATURES:
More power than the Tech 3.
Even more ergonomic lever.
Hinged clamp to reduce weight.
Hybrid piston design.
CNC rigida caliper in un unico piece.
Braking power increased by 30%.
Pads with Racing compound.
Hope
HOPE Tech 3 V4 Pads (Sintered)
€25,11
€27,90
HOPE TECH 3 V4 PADS (SINTERED)
The original pads for Hope Tech 3 V4 disc brakes offer exceptional braking performance in the most extreme conditions, even on wet or slippery terrain.
They are made with a high-density material and a high coefficient of friction that makes the Hope Tech brake kit absolutely infallible.
HOPE TECH 3 V4 PADS (SINTERED)
Compatibility: For Hope Tech 3 V4 brakes.
Option: Sintered.
COD. ART. 5055168050058
Hope
HOPE Tech 3 V4 Pads (Standard)
€20,61
€22,90
HOPE TECH 3 V4 PADS (Standard)
The original Hope Tech 3 V4 disc brake pads offer exceptional braking performance in the most extreme conditions, even on wet or muddy terrain.
They are made from a material with a high coefficient of friction, able to make the Hope Tech 3 pads absolutely unbeatable in termini di performance!
HOPE TECH V4 STANDARD PADS MAIN FEATURES:
Compatibility: For Hope Tech 3 V4 Brakes
Option: Standard
COD. ART. 505516805004
Hope
HOPE PRO2 AND PRO2 EVO FRONT HUB ...
€26,01
€28,90
HOPE PRO2 AND PRO2 EVO FRONT HUB CONVERSION KIT 10MM THRU AXLE
The Hope conversion kits convert your Hope mozzi to the corresponding mounting standards, thus allowing versatile use of the mozzi.Unlike the Pro 2 hub, on the Pro 2 Evo rear hub it is no longer necessary to change the axle, so in this case as well it is only necessary to work with the end caps.
HOPE PRO2 AND PRO2 EVO FRONT HUB CONVERSION KIT 10MM THRU AXLE KEY FEATURES:
Convertible to: front 9 x 100 mm ThruBolt thru axle
base model: front 9 x 100 mm quick release, 12 x 100 mm thru axle, 15 x 100 mm thru axle, 20 x 110 mm thru axle
Compatibility: Pro 2 / Pro 2 Evo
ITEM CODE
HUB443
Hope
HOPE TECH4 E4 Rear Brake Silver
€207,99
€319,99
HOPE REAR BRAKE TECH4 E4 SILVER
The HOPE REAR BRAKE TECH4 E4 is perfetto to be mounted on Enduro MTBs and is the perfetto compromise between power and consistency, with the same power and bite as the Tech3. Compared to the previous model it has 30% higher power and the bearings positioned in place of the springs on the levers improve bite and power.The brake caliper is the same as the Tech3: the block forged in aluminum promotes heat management and the large piston size increases power.
HOPE REAR BRAKE TECH4 E4 SILVER KEY FEATURES:
Brake fluid: Dot 5.1.
Aerospace Hose Length: rear 160 cm.
Aluminum lever.
Semi-metallic pads.
Discipline: Downhill/Freeride, Enduro.
DISK AND ADAPTER non INCLUDED. TO BE PURCHASED SEPARATELY
Hope
HOPE V4 203 VENTILATED ROTOR
€166,41
€184,90
HOPE V4 203 VENTILATED ROTOR
The V4 ventilated rotor by Hope has been specifically designed for use with the Hope Tech Eva V4 brake, as it is slightly wider than standard Hope floating brake discs. The V4 brake rotor significantly reduces the disc temperature by up to 15%, ensuring perfect braking performance, also thanks to the cooling fins that expel water and moisture, keeping the braking surface dry.
HOPE V4 203 VENTILATED ROTOR MAIN FEATURES:
203 mm Brake Rotor
Machined with CNC Machines and Laser Cut
All Parts are Made and Assembled by Hand
Compatible only with V4 Brake Calipers
Weight 283g
Hope
HOPE 142x12 Pro2 Old conversion kit
€26,01
€28,90
HOPE 142x12 Pro2 Old conversion kit
Kit to convert your Hope Pro 2 (non EVO) to 142x12mm. Includes axle and end caps.
Hope
HOPE BANJO CONNECTOR FOR 5 MM HYD...
€10,84
€12,04
HOPE BANJO CONNECTOR FOR 5 MM HYDRAULIC HOSE
Banjo connector for hydraulic hose with 90° angle. Perfetto to be mounted on 5 mm Hope brake hoses. Made of steel and weighing 1.8 g.
ITEM CODE
HBSP162
Hope
HOPE 36.4 BOLT CLAMP
€28,71
€31,90
HOPE 36.4 BOLT CLAMP
The Hope bolt clamp is the collar for the sella with bolts made of 2014 CNC aluminum material. The collar benefits from all the experience of the British marca in the production of high-quality MTB bike components.
HOPE 36.4 BOLT CLAMP TECHNICAL SPECIFICATIONS
Peso - 19g
Diametro: 36.4
Materiale: 2014 CNC aluminum
Hope
HOPE REAR HUB PRO 5 148 MM 28 HOL...
€255,92
€319,90
HOPE REAR HUB PRO 5 148 MM 28H BOOST
The HOPE REAR HUB PRO 5 148 MM 28H BOOST is the result of 30 years of experience in the design and production of high-quality drivetrain components, with the aim of using proven technology to meet the needs of current and future cycling technology.
MAIN FEATURES OF HOPE REAR HUB PRO 5 148 MM 28H BOOST:
Improved sealing to prevent dirt ingress and reduce rolling resistance.
The new labyrinth seal has zero resistance and ensures incredible freewheel performance.
New pawl and spring design to increase durability, load capacity and reduce rolling resistance.
Increased engagement from 44 to 108 with a new 6-offset-pawl hub design.
Pawls cut flush in high-strength steel for maximum robustness.
New stepped axle design for a stiffer and longer-lasting hub.
New hub body profile for greater stiffness without increasing weight.
Fully serviceable and rebuildable with simple tools.
Spacers can be easily replaced to fit different frame and axle standards.
6-bolt disc mounting.
NB: indicate in the order notes if you want the Sram XD, Shimano HG or Shimano MS freehub body
Hope
HOPE TECH4 LEFT BRAKE PISTON CAP
€11,66
€12,96
LEFT HOPE TECH4 BRAKE MASTER CYLINDER CAP
It fits solo the new Tech 4 reservoir and non the old Tech 3.
Hope
RIGHT HOPE TECH BRAKE MASTER CYLI...
€11,66
€12,96
RIGHT MASTER CYLINDER CAP FOR HOPE TECH BRAKE
Replacement right master cylinder cap for Hope Tech 4 brake levers.
Hope
HOPE QUICK RELEASE CLAMP 34.9
€34,10
€37,89
HOPE QUICK RELEASE 34.9 SEAT CLAMP
The screw collar from Hope is the quick release sella clamp made of 2014 CNC aluminum material. The collar benefits from all the experience of the British marca in the production of high-quality components for MTB bikes. The adjustment of the sella is made simple and quick thanks to the presence of a quick release lever. The tight-fitting locking nut ensures easy adjustment of the clamping force. The rubber-coated quick release lever, machined in brass, provides optimal clamping force.
HOPE QUICK RELEASE 34.9 SEAT CLAMP - TECHNICAL SPECIFICATIONS
Weight: 52g
Diameter: 34.9
Material: 2014 CNC aluminum
Hope
HOPE PRO 5 SHIMANO MICRO SPLINE F...
€102,00
€120,00
HOPE PRO 5 SHIMANO MICRO SPLINE FREEHUB BODY
Conversion kit to change the freehub body of the Hope PRO 5 mozzi with the Shimano MTB Micro Spline 12-speed standard. Version for 12x142/148 mm thru axle. To make Hope mozzi compatible with the Shimano Micro Spline standard, it is necessary to replace the hub freehub body and the end cap with the new Shimano MTB 12-speed freehub body and end cap.
NB: with this kit it is non possible to convert a 12x142 mm hub to 12x148 mm with thru axle.
Hope
HOPE FREEHUB BODY FOR PRO 4 SHIMA...
€108,00
€120,00
HOPE FREEHUB BODY FOR PRO 4 SHIMANO MICROSPLINE
Special aluminum freehub body to mount Shimano MicroSpline cassettes with a small 10-tooth sprocket. Suitable for Hope Pro 4 mozzi.
ITEM CODE
HUB538
Hope
HOPE TECH4 V4 BRAIDED REAR BRAKE
€220,94
€339,90
HOPE TECH4 V4 BRAIDED REAR BRAKE
The HOPE TECH4 V4 BRAIDED REAR BRAKE replaces the Tech 3 and is compatible with all Hope calipers. The new master cylinder can be used in combination with all four calipers of the previous model, namely X2 Cross Country, E4 Enduro, V4 Downhill and TrialZone for trial. Braking power has been increased by 30%, made possible both by a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned on the lever pivot, allows for a lighter return spring and makes using the brakes on descents less tiring. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated in modo da poter ospitare pistoni ibridi in acciaio inossidabile con inserto fenolico per movimenti ancora più fluidi e minore manutenzione. The brake is sold with Racing organic compound pads designed for minimal fade and maximum power.
HOPE TECH4 V4 BRAIDED REAR BRAKE KEY FEATURES:
Greater power than the Tech 3.
Even more ergonomic lever.
Hinged clamp to reduce weight.
Hybrid piston design.
Pinza rigida CNC in un unico pezzo.
Braking power increased by 30%.
Racing compound pads.
Hope
HOPE FRONT HUB PRO 5 110 mm 32 HOLES
€125,91
€139,90
HOPE FRONT HUB PRO 5 110 MM 32 HOLES
The HOPE FRONT HUB PRO 5 110 MM 32 HOLES combines 30 years of experience with the demands of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was the reduction of rolling resistance in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system, with new springs.Another important upgrade of the rear mozzi consists in increasing the points of engagement (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in real terms you get a feeling of speed on the trail while keeping crank movement at an acceptable level without compromising the hub’s freedom of movement or its reliability. The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows the installation of larger bearings in a better arrangement to fit the latest freehub standards, while at the same time increasing load capacity.
HOPE FRONT HUB PRO 5 110 MM 32 HOLES MAIN FEATURES:
Sealed stainless steel cartridge bearings.
Hub shell machined from forged solid aluminum.
Standard 6-bolt disc mounting.
Larger spoke flange to allow the building of stiffer wheels.
Unbeatable reliability.
Torq end cap.
The hub flanges are moved 5 mm further out compared to the standard 100 m front hub to increase wheel stiffness.
32 holes.
Machined from forged 2014 T6 aluminum.
Weight (approximate): 188 g.
NB: specify in the order notes whether 15 or 20 mm
Hope
HOPE TECH3 BRAKE LEVER CLAMP
€18,59
€20,65
CLAMP FOR HOPE TECH3 BRAKE LEVER
The CLAMP FOR HOPE TECH3 BRAKE LEVER allows you to securely fasten the Tech3 lever to your MTB handlebar.
CLAMP FOR HOPE TECH3 BRAKE LEVER KEY FEATURES:
Compatible with Hope Tech3 brake levers.
in aluminum.
ITEM CODE
HBSP316B (Color: Blue) / HBSP316N (Color: Black) / HBSP316O (Color: Orange) / HBSP316P (Color: Viola) / HBSP316R (Color: Red) / HBSP316S (Color: Argento)
Hope
HOPE Adapter (C) Post to Post (F-...
€19,71
€21,90
HOPE ADAPTER (C) POST TO POST (F-203/R-203)
HOPE brake adapter (C) Postmount to postmount (F-203/R-203)
Hope
HOPE REPLACEMENT PISTON FOR TECH4...
€18,90
€21,00
HOPE REPLACEMENT PISTON FOR TECH4 BRAKE LEVER
Replacement piston for Hope Tech4 brakes complete with sealing rings and spring for Hope Tech 4 brake levers. Compatible with DOT5.1 brake fluid.
ITEM CODE
HBSP423C
Hope
HOPE EVO GR4 BRAIDED BLACK REAR B...
€314,91
€349,90
The EVO GR4 caliper is designed to ensure exceptional performance under heavy-duty conditions. Its main features include:
Caliper made from a single piece, which reduces weight and increases rigidity. Four hybrid pistons that allow for smooth movement and optimal heat management. Larger pistons for superior braking power. Larger pistons increase the braking ratio by approximately 6% over the Tech 4 V4 braking system. Increased caliper stiffness for improved power and control. Not compatible with ventilated rotors. Revised hole cap design reduces width for greater frame clearance. Choose this caliper for maximum power in the most demanding applications.
HOPE EVO GR4 BRAIDED BLACK REAR BRAKE MAIN FEATURES:
This four-piston braking system is the ideal choice for the most demanding applications. It offers:
Maximum power without compromise.
Super smooth lever action.
Premium construction that makes power control intuitive.
It represents the benchmark for use in the gravity discipline and for e-bikes.
Hope
HOPE EVO GR4 BRAIDED BLACK FRONT ...
from €314,91
€349,90
The EVO GR4 caliper is designed to ensure exceptional performance under heavy-duty conditions. Its main features include:
Caliper made from a single piece, which reduces weight and increases rigidity. Four hybrid pistons that allow for smooth movement and optimal heat management. Larger pistons for superior braking power. Larger pistons increase the braking ratio by approximately 6% over the Tech 4 V4 braking system. Increased caliper stiffness for improved power and control. Not compatible with ventilated rotors. Revised hole cap design reduces width for greater frame clearance. Choose this caliper for maximum power in the most demanding applications.
HOPE EVO GR4 BRAIDED BLACK FRONT BRAKE MAIN FEATURES:
This four-piston braking system is the ideal choice for the most demanding applications. It offers:
Maximum power without compromise.
Super smooth lever action.
Premium construction that makes power control intuitive.
It represents the benchmark for use in the gravity discipline and for e-bikes.