Amflow

smart front light The intelligent Amflow front light supports one-touch on and off and switching between high and low beams via wireless controls, offering convenience that helps you easily illuminate complex terrain and ensure your safety while riding. Instantly turn the Avinox front light on or off or switch from high beam to low beam with a simple tap on the two wireless controls, without having to take your eyes off the road while you pedal. Customize the controller functions to smoothly adapt your setup to any scenario, from mountain trails to city commuting. With its high-efficiency LEDs, the Avinox front light provides focused, long-distance illumination, with power up to 1200 lm. An internally optimized reflective surface ensures even light distribution, guaranteeing clear visibility even on the most demanding terrain. A lightweight, compact body fits easily on a wide range of bikes. Integrated finned heat sinks keep the light cool while maintaining a refined and practical appearance. An aerospace-grade magnesium-aluminum alloy housing and advanced sealing protect against heavy rain, splashes, and dust, ensuring stable and reliable performance in any environment. Wireless control technology allows you to easily switch and select modes: no more tangled wires, for a cleaner look and an unrestricted riding experience. AVINOX FRONT LIGHT For PL Carbon / PL Carbon pro 500lm KEY FEATURES: One-touch beam control High-efficiency LEDs, uniform illumination Lightweight, compact design IP56 waterproofing, reliability in all weather conditions Wireless control, clean installation Brightness: 1200 lm in high beam mode; 500 lm in low beam mode. Power consumption: 17 W in high beam mode; 7.5 W in low beam mode. Dimensions: 69×53×51 mm (L×W×H) Weight: 105 g Control method: Avinox wireless controls High/low beam mode: supported, manual switching via Avinox wireless controls. Protection level: IP56 Mounting kit required to be purchased separately: SKU: CP.EB.00000256.01

The Amflow PR Carbon sets new benchmarks in the high-end e-MTB segment. It combines the impressive performance of cutting-edge drive technology with the lightweight nature of an ultra-light carbon frame. With a frame weight of approximately 2.9 kg, the bike delivers an outstanding strength-to-weight ratio, forming the foundation for direct and agile handling while ensuring excellent stability and control on demanding trails. With more than 40 adjustable geometry configurations, the bike can be precisely adapted to the rider’s individual style and the specific demands of the terrain. At the heart of the system is the Avinox M2 drive unit, delivering 110 Nm of nominal torque and a peak output of 125 Nm for high-performance riding. The Amflow PR Carbon is equipped with a removable 800 Wh battery, allowing convenient external charging and quick swaps for worry-free long rides. System control is intuitive thanks to a 2-inch OLED display and wireless controller. AMFLOW PR CARBON BIKE – KEY FEATURES: Carbon frame with a weight of approximately 2.9 kg Avinox M2 drive unit with up to 125 Nm torque Suspension FOX Float Rhythm rear shock and FOX AWL HD Sport fork Drivetrain SRAM S1000 Eagle Transmission rear derailleur Progressive geometry with up to 40 adjustment options: head angle, bottom bracket height, and chainstay length Battery removable Avinox 800 Wh unit Front tire Maxxis Assegai 29.0 × 2.50 M356RU 3C MaxxGrip / EXO+ / TR Rear tire Maxxis DHR II 27.5 × 2.50 M327RU New MaxxTerra / DD / TR TECHNICAL SPECIFICATIONS Frame Amflow PR Carbon frame 40 adjustable geometry configurations Compatible with 27.5″ and 29″ rear wheels 5 head angle settings 2 bottom bracket height settings 4 chainstay length settings Up to 40 theoretical geometry combinations E-Bike System Avinox M2 drive unit Nominal torque: 110 Nm Peak torque: 125 Nm 2″ Avinox OLED display Removable 800 Wh Avinox battery Wireless Avinox controllers (left and right) Charger 4 A / 168 W Rear Shock FOX Float Rhythm Custom tuning LSR adjustment Size: 210×55 mm Air shock Fork FOX AWL HD Sport 160 mm travel RAIL 2.0 cartridge Sweep / LSR adjustment 15×110 mm axle 44 mm offset Drivetrain SRAM S1000 Eagle Transmission rear derailleur SRAM Eagle Transmission 38T direct mount chainring SRAM AXS Pod controller SRAM XS-1270 Eagle cassette 10–52T SRAM Eagle 70 Flattop chain Avinox SL cranks (155 mm M/L, 160 mm XL/XXL) Brakes Tektro TKD173 hydraulic 4-piston brakes Tektro 203 mm rotors (2.3 mm) with magnet Wheels Amflow XMA-30 Mullet Front: 29″ alloy, 30 mm internal width Rear: 27.5″ alloy, 30 mm internal width 32-hole tubeless ready SAPIM E-Light spokes Alloy hubs with sealed bearings Rear hub with 4 pawls, 36T HG Tires Front: Maxxis Assegai 29×2.50 3C MaxxGrip EXO+ TR Rear: Maxxis DHR II 27.5×2.50 MaxxTerra DD TR Handlebar Amflow Enduro alloy handlebar Width 800 mm Rise 40 mm 35 mm clamp diameter Upsweep 5° / Backsweep 9° Grips Amflow Enduro Grip 2 lock-on Stem Amflow split stem Length 35 mm 35 mm clamp diameter Saddle Amflow mountain saddle Dropper Seatpost Adjustable spacers 0 / 5 / 10 / 15 / 20 mm M: 190 mm L / XL: 210 mm XXL: 230 mm

Amflow Motor Cover – Premium Protection for E-MTB The Amflow Motor Cover is an original replacement part designed to provide reliable and effective protection for your e-bike motor. Specifically engineered for the Amflow PL Carbon and Amflow PL Carbon Pro models, it ensures a perfect integration with the frame and full protection even in the most demanding riding conditions. Made from durable and lightweight materials, it shields the motor unit from mud, dust, debris, water, and impacts, helping to maintain long-term performance, durability, and reliability. Ideal both as a direct replacement in case of damage or wear, and as a maintenance component for trail and enduro use. Main Features Original Amflow replacement part Full protection for the mid-drive motor area Perfect integration with Amflow PL frame design Strong structure against impacts, mud, and debris intrusion Lightweight and aerodynamic design Simple and precise installation Compatibility Amflow PL Carbon (800Wh) Amflow PL Carbon Pro (800Wh / 600Wh) Benefits Protects the motor from damage and premature wear Maintains long-term efficiency of the e-bike system Extends the overall lifespan of the bike OEM part with guaranteed fit and compatibility Perfect for riders who want to keep their Amflow protected, efficient, and ready for every trail adventure.

Spider For Avinox System For PL Pro / PL Pro Carbon

The Amflow 12A charger is a powerful fast charger for the Amflow PL Carbon and Carbon Pro equipped with the DJI Avinox system. With an impressive charging current of 12 amps, it charges the battery from 0% to 75% in just 1.5 hours, so you can be ready for your adventures again in record time. Amflow fast charger for DJI Avinox system 12A fast charger for ultra-quick charging Compatible with Amflow PL Carbon and Carbon Pro Supplied without EU power cable Note: The charger is supplied without a power cable. A C13 power cable is required for operation.

The Amflow rear thru axle is an original replacement part designed to ensure proper rear wheel fastening on Amflow PL Carbon and PL Carbon Pro e-bikes. It delivers maximum stiffness, precision, and safety even in the most demanding riding conditions. Ideal for maintenance, replacement, or restoration of the original rear wheel fastening system. Key Features Original Amflow replacement part Compatible with Amflow PL Carbon and PL Carbon Pro (2025) System: rear thru axle Boost standard 12x148 mm Includes axle, spacer, and sealing ring High structural stiffness for MTB and e-MTB use Precise and secure installation Benefits Improved rear wheel stability Reduced hub play and vibrations Enhanced off-road reliability Perfect integration with the original Amflow frame High resistance to torsion and impacts Recommended Use Replacement of worn or damaged axle Routine and advanced maintenance for Amflow e-bikes Restoration of proper rear wheel fastening Trail, all-mountain, and electric enduro riding Compatibility Amflow PL Carbon Amflow PL Carbon Pro DJI Avinox motor system Technical Specifications Type: rear thru axle Standard: 12x148 mm Boost Material: high-strength alloy (OEM Amflow) Product code: YC.JG.QX004208.03 Notes Original product intended exclusively for compatible Amflow frames. Always verify compatibility before purchase.

AMFLOW LOCKRING FOR SPIDER With the Amflow lockring for eBike for DJI Avinox motor, you can mount the corona or the spider in a secure and reliable modo. Make sure to use the correct tightening torque. The specific tool is required for installation and removal. AMFLOW LOCKRING FOR SPIDER MAIN FEATURES: Lockring for eBike to fasten the corona or the spider For DJI Avinox M1 motor Original Amflow spare part for eBike Drivetrain system: DJI Avinox Manufacturer: Amflow DJI Avinox system: M1

Display - Motor Connection Cable For PL Pro / PL Pro Carbon.

Specially developed for the PL Carbon and PL Carbon Pro e-MTBs with DJI Avinox drivetrains. At 155mm long, the Amflow crankset offers the perfect balance between efficiency and ground clearance. AMFLOW ISIS AVINOX SYSTEM 155 LEFT CRANK MAIN FEATURES: Amflow Crank Arm for DJI Avinox Transmission Left crank for Amflow PL Carbon / Pro Length 155 mm Standard ISIS attack

Specially developed for the PL Carbon and PL Carbon Pro e-MTBs with DJI Avinox drivetrains. At 155mm long, the Amflow crankset offers the perfect balance between efficiency and ground clearance. AMFLOW ISIS AVINOX SYSTEM 155 RIGHT CRANK MAIN FEATURES: Amflow Crank Arm for DJI Avinox Transmission Right crank for Amflow PL Carbon / Pro Length 155 mm Standard ISIS attack

AMFLOW E-MTB CHAIN GUIDE With the Amflow chain guide for eMTB, the chain always stays on track, even on the most demanding trails. Mounted directly on the frame, it ensures smooth and safe running of the chain on the sprocket, preventing it from coming off. The Amflow chain guide is mounted on all Amflow PL Carbon and PL Carbon Pro models. AMFLOW E-MTB CHAIN GUIDE KEY FEATURES: Perfect chain run in every riding situation. Increased riding comfort and safety. Simple installation and robust construction. Suitable for all Amflow PL Carbon models.

AVINOX M2S Side Motor Cover is the original replacement part designed to protect and maintain the AVINOX M2S motor unit of high-performance e-bikes in perfect condition. An ideal solution in case of loss, damage, or wear of the original cover. Made to ensure perfect integration with the AVINOX M2S motor system, this side cover provides effective protection for internal components, maintaining the clean design and original finish of the bicycle. Simple and precise assembly allows for quick replacement without modifications, restoring your e-bike to optimal operating conditions. A small but essential component for those who want to preserve the reliability, aesthetics, and functionality of their electric assist system. Key Features Original AVINOX spare part for M2S motor Side protection for the motor unit Quick replacement and simple installation Perfect compatibility and aesthetic integration Ideal in case of loss or damage to the original cover Compatibility AVINOX M2S motor system E-bikes equipped with AVINOX M2S motor unit Technical Specifications Product code: CP.EB.00700407.01 EAN: 6937224150690 Colour: Black/Red Package contents: 1x AVINOX M2S Side Motor Cover

Overwhelming Power, Naturally RefinedThe Avinox M2S motor unit uses smart sensors and algorithms to deliver a linear ride, with a maximum torque of up to 150 N·m and a peak power of 1500 W.Absolute Silence, Immersive RideInnovative composite planetary gears and helical gear design reduce operating noise by up to 45 dBA for a quieter, more immersive ride.Charge Fast, Ride FreeA high-capacity 700 Wh battery combined with 3× super-fast charging supports epic all-day rides and helps eliminate range anxiety.Versatile Geometry to Conquer Any TerrainWith up to 40 geometry combinations, you can precisely adjust the head tube angle, bottom bracket height, and chainstay length to suit different trails and riding styles.Compact, Even More CapableWeighing 2.59 kg, the Avinox M2S motor unit increases power density by 45% and torque density by 21.6% compared to the previous generation.Smart Offline NavigationThe Avinox Ride app imports third-party routes and transforms ride history into route files to sync ride data with one click. AMFLOW PX CARBON PRO BIKE KEY FEATURES: The Avinox M2S motor unit has a rated power of 250 W, with a peak power of up to 1500 W in Trail, Turbo, Auto, and Boost modes and a maximum torque of 150 N·m in Boost mode. Compared to the Avinox M1 (peak power 1000 W, maximum torque 120 N·m), power and torque increase by approximately 45.9% and 21.6% respectively. Actual output performance may vary depending on usage scenarios, riding modes, and system status. Data was measured for Avinox in a quiet and open indoor environment, using a binaural microphone at an axial distance of 0.1 m and a height of 1.5 m. Data derived from laboratory comparative tests: charging the Avinox FP700 battery (from 0% to 80% SOC) with the Avinox 508 W charger is approximately three times faster than using the Avinox 168 W charger. The bike offers five head tube angle settings, two bottom bracket height settings, and four chainstay length settings. Users can combine these settings according to different riding styles and terrain conditions. Theoretically, these parameters can result in up to 40 geometric configurations. The actual adjustment range and applicable effects depend on real use. The weight of the Avinox M2S motor unit does not include heat sinks. Data derived from Avinox laboratory calculations, based on a comparison with the Avinox M1 motor unit under the same test conditions. Amflow PX supports importing route files in GPX, FIT, and TCX formats. Offline navigation is currently limited to a map-less mode, where only the route track is displayed. TECHNICAL SPECIFICATIONS Frame Amflow PX Carbon Pro Color: Moonstone grey 40 adjustable geometry configurations Compatible with 27.5″ and 29″ rear wheels Adjustments: 5 head tube angles 2 bottom bracket heights 4 chainstay lengths E-bike system Motor: Avinox M2S Rated torque: 130 N·m Peak torque: 150 N·m Display: Avinox OLED 2″ Battery: Integrated 700 Wh Controls: Avinox wireless (right/left) Fast charger: 12 A / 508 W Rear shock FOX Float X Factory (MY 2027) Two-position lever LSC and LSR adjustment Size: 210×55 mm Type: air Fork FOX 36 Factory (MY 2027) Travel: 160 mm Cartridge: GRIP X2 Adjustments: HSC, LSC, HSR, LSR Standard: 15×110 mm Offset: 44 mm Drivetrain Derailleur: SRAM X0 Eagle Transmission Chainring: SRAM Eagle Transmission 38T (DM) Shifters: SRAM AXS Pod Rocker Cassette: SRAM XS-1295 Eagle Transmission 10-52T Chain: SRAM X0 Eagle Flattop Power supply: Avinox M2 series electronic cable Cranks: Avinox SL (155 mm M/L, 160 mm XL/XXL) Brakes Magura Gustav Pro four-piston Discs: Magura with magnet, 203 mm, 2.5 mm Wheels Amflow XMC-30 Mullet Front: 29″, carbon, 30 mm internal, 28 holes Rear: 27.5″, carbon, 30 mm internal, 32 holes Spokes: SAPIM E-Light Front hub: alloy, 15×110 mm Rear hub: alloy, 12×148 mm, 6 pawls 60T, XD Tires Front: Schwalbe Magic Mary 29×2.5, Ultra Soft, Tubeless Rear: Schwalbe Albert 27.5×2.5, Addix Soft, Tubeless Cockpit components Handlebar: Amflow Enduro carbon, 800 mm, 35 mm Grips: Amflow Enduro Grip 2 lock-on Stem: 35 mm, length 35 mm Saddle: Amflow titanium Seatpost: telescopic with adjustable spacers Seatpost (travel) M/L: 190 mm XL: 210 mm XXL: 230 mm Adjustments: 0 / 5 / 10 / 15 / 20 / 25 mm

- For Amflow PL Carbon and PL Carbon Pro - Original Amflow spare part

Amflow rubber plug for RIGHT head tube cable The Amflow rubber plug is positioned on the head tube and seals the opening in the frame from which the head tube cable exits. The plug is an original Amflow spare part and is available for both the left and right side. The rubber plug is also compatible with the Amflow PL Carbon and Amflow PL Carbon Pro models. Amflow rubber plug for head tube cable main features: Rubber plug for the head tube cable Mounted on the side of the head tube Available for the right and left side For Amflow PL Carbon and Amflow PL Carbon Pro Original Amflow spare part Drive system: DJI Avinox

Modulo Amflow wheel speed sensor The Amflow DJI Avinox speed sensor cable, together with the DJI Avinox speed sensor ring, regulates the maximum speed allowed by law. If your Amflow e-bike reaches 25 km/h, motor assistance is reduced. The cable is compatible with Amflow PL Carbon and Amflow PL Carbon Pro. Modulo Amflow wheel speed sensor KEY FEATURES: Features of the Amflow DJI Avinox speed sensor cable Speed sensor for DJI Avinox Regulates the maximum permitted speed Compatible with Amflow PL Carbon and PL Carbon Pro Original Amflow spare part

REAR AMFLOW DJI AVINOX M1 MOTOR MOUNTING SCREW The Amflow DJI Avinox M1 motor mounting screw allows you to mount the DJI Avinox M1 motor on your Amflow e-bike. The screw is available in two versions, both needed for installation. The long version is 78 mm long and is fixed to the front part of the motor, while the short version is 69 mm long and is fixed to the rear part of the motor. REAR AMFLOW DJI AVINOX M1 MOTOR MOUNTING SCREW KEY FEATURES: Amflow DJI Avinox M1 motor mounting screw Mounting screw for DJI Avinox M1 motor Available in 2 versions: 78 mm for the front part | 69 mm for the rear part Package contents: 1 screw Original Amflow spare part

The 348 mm Amflow Touring kickstand is the original spare part designed for the Amflow TL Carbon bicycle. Ideal for replacing the existing kickstand, it allows you to park the bike conveniently and stably during stops, offering a functional solution for everyday use and e-bike rides. AMFLOW TOURING 348 MM KICKSTAND MAIN FEATURES: Brand: Amflow Type: bicycle kickstand Length: 348 mm Compatibility: Amflow TL Carbon Spare part code: CP.EB.00700740.01 EAN: 6979871810893

The AMFLOW eMTB Mountain saddle is an original component designed to offer comfort, support, and ergonomics during electric mountain bike rides. Thanks to its sporty design, it is ideal for tackling trails and off-road routes, ensuring uniform pressure distribution across the entire surface of the saddle and promoting a comfortable seating position even during the most demanding rides. Designed to meet the needs of cyclists seeking a balance between comfort and performance, the AMFLOW Mountain saddle represents an ideal solution both as an original replacement and for maintaining the configuration of your e-MTB. It comes as standard equipment on the AMFLOW PX Carbon, PR Carbon, and PR Carbon Pro. Main features: Brand: AMFLOW Model: eMTB Mountain Saddle Type: Saddle for electric mountain bike (e-MTB) Ergonomics: Sporty, designed for trail riding Comfort: Uniform pressure distribution on the saddle surface Compatibility: AMFLOW PX Carbon, AMFLOW PR Carbon, and AMFLOW PR Carbon Pro Reference system: DJI Avinox M2 and M2S Color: Black Package contents: 1 AMFLOW eMTB Mountain saddle Manufacturer code: CP.EB.00700476.01 EAN: 6937224153578

The AMFLOW eMTB Mountain Titanium saddle is an original component designed to offer comfort, support, and control during electric mountain bike rides. Thanks to its sporty ergonomics and robust titanium rails, it is ideal for tackling technical trails and challenging routes, ensuring a seating position suited to the dynamic riding typical of e-MTBs. Its structure promotes an even distribution of pressure across the saddle surface, helping to improve comfort while pedaling. The black finish blends perfectly with the aesthetics of AMFLOW bicycles, making it an ideal choice both as an original replacement part and for replacing a worn saddle. Main features: Brand: AMFLOW Model: eMTB Mountain Titanium Type: electric mountain bike saddle Ergonomics: sporty, designed for trail use Rails: titanium, robust and durable Comfort: even pressure distribution across the seating surface Color: black Product code: CPEB0070047701 EAN: 6937224153592 The AMFLOW Mountain Titanium saddle is the ideal solution for those who wish to maintain the original configuration of their e-MTB with a component designed to accompany them on off-road rides.

The AMFLOW TL Carbon chainstay fender kit is an accessory designed to protect the rear triangle of your bike, helping reduce mud and water spray on mountain bike rides. Designed to integrate with compatible AMFLOW TL Carbon frames, it helps protect the chainstay area from dirt kicked up by the rear wheel. A practical solution for keeping your bike cleaner on trails, gravel roads and wet routes, while preserving the frame’s clean aesthetic. Key features: Fender kit designed for the chainstays Designed for compatible AMFLOW TL Carbon models Helps limit mud and water spray around the rear triangle Ideal for mountain bike rides on wet and muddy terrain Genuine AMFLOW replacement part Before purchasing, check that the kit is compatible with your exact bike model.

The Avinox right-hand remote for M2 and M2S motors is an original replacement part designed to conveniently manage the electric assistance system directly from the handlebar. Thanks to its wireless Bluetooth connection, it provides easy, instant control of the Avinox system while keeping your e-MTB cockpit clean and uncluttered. Compact and intuitive to use, this remote is ideal for replacing a damaged component or restoring the functionality of your e-bike's control system. Compatibility should be checked against the Avinox motor and display installed on your bike. Key features: Type: wireless right-hand remote Brand: Avinox Connection: wireless Bluetooth Motor compatibility: Avinox M2 and M2S Function: control of the Avinox system directly from the handlebar Use: replacement part for compatible e-bikes Product code: CP.EB.00700416.01 Before purchasing, check that the remote is compatible with your bike's Avinox system.

The AMFLOW TL Carbon headset kit is a replacement part designed for compatible AMFLOW bikes, ideal for maintaining and restoring the steering system. This component helps ensure the headset functions properly, allowing the fork to turn smoothly and providing precise, controlled handling. Designed for use on compatible AMFLOW e-MTBs, the kit is suitable for replacing worn or damaged components and maintaining the efficiency of the steering system. Before purchasing, check compatibility with your bike model. Key features: Product: AMFLOW TL Carbon headset kit Type: headset replacement kit Use: maintenance and replacement of headset components Compatibility: compatible AMFLOW bikes Function: supports smooth fork rotation and precise handling

The AMFLOW TA dropper seatpost with a 31.6 mm diameter and 150 mm travel is designed to improve control and freedom of movement on demanding MTB trails. Ideal for compatible AMFLOW e-MTBs, it allows the saddle to be lowered quickly on descents and technical sections, making it easier for the rider to move their body and maintain a more effective riding position on the trail. The adjustable travel allows the saddle height to be adapted to individual riding needs and the bike's configuration. This functional replacement component is suitable for restoring or upgrading the saddle adjustment system and is designed to integrate with compatible AMFLOW bikes. Main features: Brand: AMFLOW Model: TA Type: Dropper seatpost Diameter: 31.6 mm Travel: 150 mm Travel adjustment: 0 / -10 / -20 mm Use: Compatible MTBs and e-MTBs Compatibility note: Before purchasing, check the seat tube diameter, available insertion depth, and compatibility with your bike's frame and remote actuation system.