AMFLOW PX CARBON BIKE

Overwhelming Power, Naturally Refined
The Avinox M2S motor unit uses intelligent sensors and algorithms to deliver linear pedaling, with a maximum torque of up to 150 N·m and a peak power of 1500 W.
Absolute Silence, Immersive Ride
The innovative compound planetary gears and helical gear design reduce operating noise down to 45 dBA for a quieter, more immersive ride.
Charge Fast, Ride Free
A high-capacity 700 Wh battery paired with 3× super-fast charging supports epic all-day rides and helps eliminate range anxiety.
Versatile Geometry to Conquer Any Terrain
With up to 40 geometry combinations, you can precisely adjust the head tube angle, bottom bracket height, and chainstay length to suit different trails and riding styles.
Compact, Even More Capable
Weighing 2.59 kg, the Avinox M2S motor unit increases power density by 45% and torque density by 21.6% compared to the previous generation.
Smart Offline Navigation
The Avinox Ride app imports third-party routes and turns ride history into route files to sync riding data with one click.

AMFLOW PX CARBON BIKE KEY FEATURES:

• The Avinox M2S motor unit has a rated power of 250 W, with peak power up to 1500 W in Trail, Turbo, Auto, and Boost modes, and a maximum torque of 150 N·m in Boost mode. Compared to Avinox M1 (peak power 1000 W, maximum torque 120 N·m), power and torque increase by approximately 45.9% and 21.6% respectively. Actual output performance may vary depending on usage scenarios, riding modes, and system status.
• Data was measured for Avinox in a quiet, open indoor environment using a binaural microphone at an axial distance of 0.1 m and a height of 1.5 m.
• Data derived from comparative lab tests: charging the Avinox FP700 battery (0% to 80% SOC) with the Avinox 508 W charger is approximately three times faster than using the Avinox 168 W charger.
• The bike offers five head tube angle settings, two bottom bracket height settings, and four chainstay length settings. Users can combine these settings to suit different riding styles and terrain conditions. Theoretically, these parameters can result in up to 40 geometric configurations. The actual adjustment range and applicable effects depend on real-world use.
• The weight of the Avinox M2S motor unit does not include heat sinks.
• Data derived from Avinox lab calculations, based on a comparison with the Avinox M1 motor unit under the same test conditions.
• Amflow PX supports importing route files in GPX, FIT, and TCX formats. Offline navigation is currently limited to a mapless mode, where only the route track is displayed.
  

TECHNICAL SPECIFICATIONS

• Amflow PX Carbon Frame
  40 adjustable geometry configurations*
  Compatible with 27.5″ and 29″ rear wheels
  The bike offers five head tube angle settings, two bottom bracket height settings, and four chainstay length settings. Users can combine these settings to suit different riding styles and terrain conditions. Theoretically, these parameters can result in up to 40 geometric configurations. The actual adjustment range and applicable effects depend on real-world use.
• E-bike System
  Avinox M2S Motor Unit: rated torque 130 N·m, peak torque 150 N·m
  Avinox Display: 2″ OLED control display
  Avinox Integrated Battery: 700 Wh
  Avinox Wireless Controls: left and right sides
  Avinox Fast Charger: 12 A / 508 W
• Rear Shock
  FOX Float X Performance (MY 2027)
  Two-position lever, custom tune, LSR adjust, 210×55 mm, air shock
• Fork
  FOX 36 Performance (MY 2027)
  160 mm travel, GRIP cartridge, Sweep/LSR adjust, 15×110 mm, 44 mm offset
• Drivetrain
  Rear Derailleur: SRAM S1000 Eagle Transmission
  Chainring: SRAM Eagle Transmission 38T for Avinox
  Shift Levers: SRAM AXS Pod controller
  Cassette: SRAM XS-1270 Eagle Transmission 10-52T
  Chain: Flattop for SRAM Eagle 70 Transmission
  Power: electronic cable for Avinox M2 series rear derailleur (SRAM AXS extension)
  Crankset: Avinox SL (M/L: 155 mm; XL/XXL: 160 mm)
• Brakes
  Magura Gustav Pro hydraulic disc brake, four-piston calipers
  Magura rotor with magnet (203 mm, 2.5 mm)
• Wheels
  Amflow XMA-30 mullet version
  Front Rim: alloy, 29″, 30 mm inner width, 32 holes, Tubeless Ready
  Rear Rim: alloy, 27.5″, 30 mm inner width, 32 holes, Tubeless Ready
  Spokes: SAPIM E-Light
  Front Hub: alloy, two sealed bearings, 15×110 mm, 32 holes, six bolts
  Rear Hub: alloy, four sealed bearings, 12×148 mm, 32 holes, six bolts, four 36T pawls, HG
• Tires
  Front: Schwalbe Magic Mary radial, 29×2.5, Gravity Pro, ultra soft, Tubeless Ready
  Rear: Schwalbe Albert radial, 27.5×2.5, Gravity Pro, Addix Soft, Tubeless Ready
• Handlebar
  Amflow Enduro alloy
  40 mm rise, 800 mm width, 35 mm diameter
  5° upsweep, 9° backsweep
• Grips
  Amflow Enduro Grip 2 lock-on
• Stem
  Amflow MTB split stem
  35 mm length
  35 mm clamp diameter
• Saddle
  Amflow mountain saddle
• Dropper Post
  Amflow adjustable thickness (0/5/10/15/20/25 mm)
  M/L frame: 190 mm
  XL frame: 210 mm
  XXL frame: 230 mm