Ultimi arrivi

SPECIALIZED ALL CONDITION ARMADILLO ELITE TIRE 700X28C The SPECIALIZED ALL CONDITION ARMADILLO ELITE TIRE 700X28C is equipped with a tread that provides grip and traction in all conditions and is made with highly puncture-resistant materials. GRIPTON is perfect for all types of terrain. SPECIALIZED ALL CONDITION ARMADILLO ELITE TIRE 700X28C MAIN FEATURES: Casing: 120 TPI. Folding bead. GRIPTON compound Anti-puncture protection: Armadillo Elite. ARTICLE CODE 00014-4108

SPECIALIZED PURGATORY GRID 2BLISS READY T7 TIRE 27.5/650BX2.3 The SPECIALIZED PURGATORY GRID 2BLISS READY T7 TIRE 27.5/650BX2.3 is perfect for tackling all trails. The square knobs provide excellent traction even on sandy terrain, while the flexible grooves in the central section open during braking for greater ground contact and excellent grip. The GRID casing is cut-resistant and the GRIPTON® compound provides optimal handling in any condition. SPECIALIZED PURGATORY GRID 2BLISS READY T7 TIRE 27.5/650BX2.3 MAIN FEATURES: Rigid sidewall carcass for maximum stability and greater cut resistance compared to the Control version. Foldable bead. 2Bliss ready construction with reinforced sidewalls. Compound: GRIPTON®. PSI 25-50. Indicative weight 785g. ARTICLE CODE 00120-4091

BICYCLE SPECIALIZED STUMPJUMPER EVO PRO The Stumpjumper EVO Pro is a no-compromise trailbike. S-Sizing geometry, adjustable head angle, and 150mm of travel. Light and capable, with FOX Factory suspension, carbon wheels, and X01 Eagle drivetrain. Mullet setup with a 29" wheel at the front and a 27.5" rear. Traction and handling like a 29er, agile thanks to the smaller rear wheel. The suspension travel is pointless without proper kinematics, and we kept this in mind in the Stumpjumper EVO design. With what we learned during Enduro development and over 1000 hours of field and lab testing, we greatly improved pedaling feel and created a sense of capability, efficiency, and liveliness that everyone appreciates. We increased anti-squat so the suspensions resist bobbing better, and we also improved impact absorption on sharp obstacles. In short, the Stumpjumper descends with full control and climbs with agility. The S-Sizing geometry of the Stumpjumper EVO is the most progressive. Long, low, relaxed, short-offset fork, a steeper seat tube—these make you pedal better. But the perfect geometry can differ for different riders, which is why for the Stumpjumper EVO you can tune it in six different positions. Not only can you raise the bottom bracket by 10mm, you can also adjust the head angle by up to two degrees. Finally, if you like the mullet, the Stumpjumper EVO can be fitted with a 27.5" rear wheel paired with the 29" front. The Rider-First Engineered™ technology is a size-specific design approach to ensure the same riding characteristics across all sizes. So if you’re not a giant and ride an S1, or if you need the longer S6, you’ll tackle corners with the same confidence, with an equivalent balance of stiffness, all at the lightest possible weight. In 2016 we introduced the SWAT™ compartment in the Stumpjumper’s frame to store pumps or other tools to repair a flat. Now, for the Stumpjumper, we’ve increased space again by introducing a container, the SWAT™ Bladder, which lets you carry 650 ml of water in the down tube—the same amount as a bottle. Specifications Drivetrain Bottom Bracket SRAM DUB, BSA 73mm, Threaded Shift Controls SRAM Eagle AXS Rocker Paddle Rear Derailleur SRAM X01 Eagle AXS Crankset SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm Cogset SRAM XG-1295 Eagle, 10-52t Chain SRAM X01 Eagle, 12-speed Gears 32T Frame Seat Collar Alloy, 38.6mm Frame FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5" Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel Suspensions Fork FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel Rear Shock FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm Brakes Front brake SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2 Rear brake SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2 Wheels Front Tire Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3" Spokes DT Competition Race Rear Wheel Hub DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h Front Wheel Hub DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h Rear Tire Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3" Rims Roval Traverse Carbon 29F/27.5R, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready Tubeless Standard, Presta Valve Cockpit Saddle Bridge, 155/143mm, Hollow Ti-rails Handlebar Stem Deity, 35.0mm Handlebar Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm Cockpit Grips Deity Lockjaw Seatpost Bike Yoke, Revive Max, 34.9 (S1:120mm, S2-S3:150mm, S4-S5: 185mm, S6: 213mm) Weight Weight 13.86kg (30 lb, 8.9 oz) Painted size S4

TUBELESS INSERT VITTORIA AIR LINER PROTECT E-BIKE 27.5X2.4 - 2.6 The Vittoria Air-Liner Protect e-Bike is a revolutionary tire insert, specifically designed for electric mountain bikes. Designed to meet the challenges imposed by the greater weight of e-Bikes, this innovative product offers riders the perfect balance between protection, performance, and lightness, ensuring peace of mind on all terrains. Made to withstand strong impacts and stresses associated with using e-Bikes, the Air-Liner Protect e-Bike provides a smoother, more controlled ride. Its advanced composition offers extraordinary puncture resistance and impact protection, while maintaining the bike’s agility and reactivity. The design is intended to effectively dampen shocks and vibrations, improving stability and comfort. TUBELESS INSERT VITTORIA AIR LINER PROTECT E-BIKE 27.5X2.4 - 2.6 MAIN FEATURES: Compatible with tires 27.5×2.4/2.6. You will no longer fear sharp rocks or tricky roots: Air-Liner Protect has your back. Air-Liner Protect protects rims from strong impacts and reduces the risk of punctures (snake bites). The “T” shape creates a barrier between the rim edge and the inner side of the tire. Air-Liner Protect does not affect tire rolling. Under air pressure, the insert collapses onto the rim creating a seal capable of withstanding even the strongest impacts. With Air-Liner Protect, no foreign object can roll inside the tire. Air-Liner Protect supports the tire sidewalls under cornering load. You can tackle corners at full speed: there is no risk that your tires will peel off the rim. Air-Liner Protect also increases sidewall protection against cuts and punctures. Thanks to its “T” shape, Air-Liner Protect allows increasing the air volume inside the tire. This means you can lower the air pressure and achieve greater grip without risking damaging the tire or the rim. Weight: 135 g.

SPECIALIZED ZEE CAGE II CARBON BOTTLE CAGE - RIGHT-SIDE INSTALLATION The ZEE CAGE II CARBON BOTTLE CAGE (right insertion) is compatible with the SWAT™ accessory that allows you to store tools and accessories. The right insertion enables the rider to manage the bottle easily even in tight spaces. ZEE CAGE II CARBON BOTTLE CAGE RIGHT INSERTION KEY FEATURES: SWAT™ compatibility. Made from FACT carbon fiber for a perfect balance of strength and lightness. Secure bottle retention with a design that allows easy lateral insertion even on small frame sizes. Can accommodate the EMT Cage Mount MTB tool. Can accommodate the MTB XC Kit Storage Box (Epic, Epic HT, and Diverge models). Estimated weight 28g.

SELLA WTB VOLT STEEL NARROW The WTB VOLT STEEL NARROW is an incredibly versatile saddle designed for speed and comfort. The medium thickness of the padding and the slim curves make this saddle perfect for long days in the saddle on your MTB. The slight rear tilt and the lowered tip allow for different seated positions. SELLA WTB VOLT STEEL NARROW MAIN FEATURES: - Use: enduro, all mountain, trail, gravel, cross country and bikepacking. - Steel rails. - Narrow. - Details: microfibre cover / Flex-Tuned shell / DNA padding. - Weight: 292 g. - Length: 265 mm. - Width: narrow 135 mm. - Sit bone range: 69-101 mm. ARTICLE CODE W065-0584

SPECIALIZED ROLL CAGE BOTTLE CAGE The Specialized Roll Cage bottle cage is made from stamped alloy and is compatible with the SWAT device with mounting on the right, left, or center for small frames. SPECIALIZED ROLL CAGE WATER BOTTLE CAGE The SWAT design creates a space-saving and aerodynamic area for carrying tools or other small items. Three mounting positions for easy access from left, right, or center. After installation, the bottle cage can be rotated into several positions. Can accommodate the EMT Cage Mount tool. Can accommodate the MTB XC Kit Storage Box (Epic and Stumpjumper HT models). Indicative weight: 50 grams

SPECIALIZED S-WORKS STUMPJUMPER 15 LTD BICYCLE The S-Works Stumpjumper 15 LTD is designed without compromise to tackle trails. Does it conquer obstacles with the confidence of a long-travel bike? Absolutely! Is it precise, agile, and efficient like a short-travel bike? Of course. Does it automatically switch from one mode to another without manual adjustments? Yes! Discover the brand-new S-Works Stumpjumper LTD with FOX Live Valve Neo. OPTIMIZED KINEMATICS The Stumpjumper 15 is the trail bike par excellence, incredibly efficient with optimal impact management. For Anti-Squat, we found the right balance between the previous Stumpjumper versions and Stumpjumper EVO, both known for exceptional pedaling efficiency. TELEPATHIC CONTROL? NOT YET... We haven’t created a sentient bike yet, but the S-Works Stumpjumper 15 LTD comes very close! Equipped with the all-new FOX Live Valve Neo, this wireless electronic suspension control technology offers numerous customization options via the FOX Bike app. The result? Pedaling efficiency comparable to a cross-country bike and downhill performance like an enduro, with lightning-fast responses to every change in terrain. OPTIMIZED GEOMETRY Designed to deliver the performance of a long-travel bike, the Stumpjumper 15 is incredibly agile in tight sections and energetic on climbs. The wide cockpit places the rider at the center of the bike, improving traction and cornering control. The lowered bottom bracket, open head angle, and optimized fork offset provide greater stability even on the most technical portions. CUSTOMIZABLE SETUP Thanks to fully adjustable geometry, the Stumpjumper 15 is the most customizable trail bike ever. Six different setups allow you to tailor performance to your riding style and terrain. You can adjust the head angle and bottom bracket height to achieve either a more stable or more responsive ride. FUN OVER RIGIDITY A frame can be stiff, but not too stiff. To offer a smooth, natural ride, it must provide the right amount of flex. The FACT 11M carbon frame of the Stumpjumper 15 is engineered to balance stiffness and flexibility, with an optimized front triangle, rear triangle, and link for trail riding. EVERYTHING AT HAND The SWAT™ 4.0 compartment of the Stumpjumper 15, an Innovation from Specialized, offers even more space inside the downtube with a practical, weather-resistant snap-in system. READY FOR ANYTHING, LIKE YOU Our full-suspension bikes are built to last and tackle any trail. Plus, with our support policies and lifetime warranty, you can replace rear swingarm bearings for free (one set per bike per year). For details, contact a Specialized dealer. Technical Specifications Frame: FACT 11m carbon, carbon rear triangle and link, trail geometry, SWAT™ integration, adjustable head angle, threaded bottom bracket, internal cable routing, 12x148 mm dropout, SRAM UDH-compatible, 145 mm travel Fork: FOX FLOAT 36 Factory, GRIP X2 cartridge, HS/LS rebound and compression adjustment, 15x110 mm thru-axle, 44 mm offset, 150 mm travel Rear Shock: FOX DHX Live Valve NEO Factory, Ride Dynamics Trail tuning, 210x55 mm, S2: 400 lbs, S3: 450 lbs, S4: 500 lbs, S5: 550 lbs, S6: 600 lbs Rims: Roval Traverse HD carbon, 30 mm internal width, tubeless-ready Hubs: DT Swiss 240 (front: 15x110 mm, rear: 12x148 mm) Tires: Front: Butcher GRID TRAIL, GRIPTON® T9 compound, 29x2.3" Rear: Eliminator GRID GRAVITY, GRIPTON® T7/T9 compound, 2Bliss Ready (S2: 27.5x2.3", S3-S6: 29x2.3") Drivetrain: SRAM XX Eagle T-Type AXS electronic Brakes: SRAM Maven Ultimate, 4-piston, HS2 rotors (front: 200 mm, rear: 180-200 mm depending on size) Seatpost: FOX Transfer NEO Factory, 34.9 mm (S2: 150 mm, S3: 175 mm, S4-S6: 200 mm) Weight: 14.48 kg (31 lb, 14.8 oz, size S4) Compatibility: Electronic drivetrain only

WTB RESOLUTE TCS TIRE 700X42 LIGHT FAST ROLLING The WTB RESOLUTE TCS TIRE 700X42 LIGHT FAST ROLLING is perfect to be mounted on Gravel bikes and to be used in all seasons. The tire features the new protection system SG2 Puncture Protection: a light Nylon insert that provides a tire-to-tire coverage and ensures that every area of the tire is defended against tears, abrasion, and punctures. WTB RESOLUTE TCS TIRE 700X42 LIGHT FAST ROLLING MAIN FEATURES: The square, well-spaced tread blocks provide high traction and shed mud and dirt quickly. Perfect for riding in all conditions. Size: 700. SG2 Puncture Protection Technology: the nylon fibers have a flat profile, which reduces the amount of rubber needed to fill the spaces between fibers and minimizes weight. Gravel tires protected by SG2 have a 120tpi casing, which improves elasticity compared to a traditional 60tpi tire. SG2 is a specially designed layer to protect against flats, improve air retention, and eliminate water infiltration. ARTICLE CODE W010-0848

BICYCLE CANNONDALE TRAIL NEO 3 Fast, fun, and functional. A hardtail e-mountain bike built to tackle any challenge, on the trail or off. This robust and fun electric mountain bike is ready to take your trail-riding game to a whole new level. Equipped with a powerful Bosch drivetrain, a long-lasting battery, and trail-ready components, it’s ready to conquer hills and dig canyons. Or outfit it with pannier racks, fenders, and lights to tackle your daily commutes. Trail Neo is ready for anything. The large 625Wh battery provides all the energy needed to get there and back. This e-bike transmission system provides pedal assistance up to a maximum speed of 25 km/h. Beyond this speed, it’s all yours. A lot of power to cover distance. Pedal longer. Have more fun. CANNONDALE TRAIL NEO 3 MAIN FEATURES: The rugged aluminum frame is equipped with a front-running light integrated and supports for a center-stand, pannier racks, and fenders. The Bosch Performance Line drive unit, sporty and versatile, delivers up to 65 Nm of torque and 300% support, quietly and naturally. The removable 625Wh battery offers enormous range for exploration and adventure. The Shimano CUES U6000 10-speed groupset, durable and reliable, provides smooth shifting and a wide range of gears. The Suntour XCM 34 fork has 100 mm of travel and large 34 mm stanchions for precise handling. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME KIT Frame: SmartForm C2 Alloy, removable 625Wh downtube battery, integrated front running light, tapered headtube, internal cable routing, 135mm QR hub spacing, IS disc mount, motor protection, headtube rack mounts, 40mm Pletscher kickstand mount, rack & fender mounts Fork: SR Suntour XCM 34 Boost, 100mm, Coil, 46mm offset. Steering tube: Integrated, 1-1/8 to 1.5", sealed bearings. E-SYSTEM Motor: Bosch Performance Line. Battery: Bosch PowerTube, 625Wh. Battery charging: Bosch 4A. Display: Bosch Intuvia w/LED remote. TRANSMISSION Drivetrain: Shimano CUES U6000. Shift levers: Shimano CUES U6000, 10-speed. Chain: KMC E500. Crankset: FSA Bosch Gen3, 170mm, 38T. Sprocket cassette: Shimano CUES LG400, 11-48, 10-speed. BRAKES Brakes: Shimano MT200 hydraulic disc, 180/180mm RT30/RT-EM300 rotors. Brake levers: Shimano MT200 hydraulic disc. WHEELS Rims: WTB STX i25 TCS, 32h, tubeless ready. Spokes: DT Swiss Champion 2.0. Tire size: 2.4. Wheel size: 29. Hubs: (F) Shimano MT400, 15x110mm thru-axle / (R) Shimano UR600, 9x135mm QR. Tires: Maxxis Ardent, 29x2.4" (M, L, XL) 27.5x2.4" (S), EXO Protection. COMPONENTS Handlebar: Cannondale 3 Riser, 6061 Alloy, 15mm rise, 8° sweep, 4° rise, 780mm, 31.8mm. Stem: Cannondale 3, 3D Forged 6061 alloy, 1-1/8", 31.8, 0°. Grips: Fabric Funguy. Saddle: Cannondale Ergo XC. Seat post: Cannondale 3, 6061 Alloy, 31.6x350mm. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEAT POST, FORK, SHIFTER, AND BRAKES ARE ALREADY MOUNTED

HOPE 34.9 SCREW-ON SEATPOST CLAMP The Hope bolt-on seat clamp with bolts is made from CNC 2014 aluminum material. The clamp benefits from the British brand's extensive experience in producing high-quality components for MTB bikes. HOPE 34.9 SCREW-ON SEATPOST CLAMP MAIN FEATURES: Weight - 19g Diameter: 34.9 Material: CNC 2014 aluminum

FORCELLINO CANNONDALE SCALPEL SI 142 AI KP432 Clamp compatible with all Scalpel - Si (all) and Scalpel Se 1. ARTICLE CODE KP432

SPECIALIZED BUTCHER GRID 2BLISS READY T7 29X2.6 GRIPTON TIRE The SPECIALIZED BUTCHER GRID 2BLISS READY T7 29X2.6 GRIPTON TIRE features pronounced side knobs to improve grip in corners and descents, while the central knobs are more spaced to improve stability. The GRID Trail casing is stiffer than the classic GRID and offers 15% more puncture protection and 30% more resistance to cuts. Standard mounting or tubeless. Gripton T7 compound for optimal grip and handling and good speed. SPECIALIZED BUTCHER GRID 2BLISS READY T7 29X2.6 GRIPTON TIRE KEY FEATURES: Size: 29x2.60. Weight (approx.): 930 g. Casing: 60 tpi. The Grid Trail casing is stiffer and more resistant than the classic Grid casing. ETRTO: 66-622. Type: Folding. Standard mounting with inner tube or tubeless. The Gripton T7 compound provides optimal grip and handling and good speed. Use: All mountain/Enduro/Gravity/E-bike. ARTICLE CODE 00121-0012

BICYCLE MONDRAKER SUMMUM CARBON R The SUMMUM CARBON R from Mondraker is the perfect choice for cyclists seeking high-level performance and an exceptional riding experience. With its cutting-edge technology and innovative design, this mountain bike is built to tackle challenging terrains and deliver superior performance in every mountain biking adventure. BICYCLE MONDRAKER SUMMUM CARBON R MAIN FEATURES: Lightweight and sturdy carbon frame that offers superior handling and greater durability. Rear shock Fox DHX2 Performance Elite, 225x70mm, ensuring excellent impact absorption and smooth handling. Progressive geometry that guarantees stability and control on technical terrains and demanding descents. High-quality components, including Sram GX DH drivetrain, 7s, and hydraulic SRAM Code brakes, for reliable and responsive performance. 29-inch wheels for greater traction and the ability to roll over obstacles with ease. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Summum Carbon Stealth Air full Carbon, Zero Suspension System, 200mm travel, Forward Geometry, Carbon Monoblock upper link, SuperBoost 12x157mm rear axle, 83mm BSA bottom bracket, HHG internal cable routing, MAX. capacity dual row Enduro bearings, shock mudguard, ISCG 05, custom frame protectors. *Optional Geometry kit. SIZES: S / M / L / XL 29". SHOCK ABSORBER: Fox DHX2 Performance Elite, 225x70mm. Settings: low-speed compression, low-speed rebound, spring preload. Trunnion top mount, 30x8mm bottom bushings. SHOCK ADJUSTMENT: ECC010 compression, ECR012 rebound. Spring rate: S size 400 lbs, M size 450 lbs, L size 500 lbs, XL size 500 lbs. FORK: Fox 40 29 Float FIT GRIP EVOL Performance, 203mm, air spring, 1-1/8” steerer tube, 20x110mm axle, offset 56mm. Settings: low-speed compression, low-speed rebound, air preload. HEADSET SERIES: Onoff Mercurium 1.5 ZS for 1-1/8” steerer tube, 41x30.15x7x45ºx45º ACB sealed bearings, geometry kit cups, external diameter 56mm. HANDLEBAR STEM: Onoff Krypton DH CNC Integrated FG, 25-30mm adjustable length, 31.8mm clamp, 6061 alloy, 2x6mm spacer. HANDLEBAR: Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm clamp. GRIPS: SDG I-Fly 2.0 I-Beam, high-density PU foam, Cordura sides. FRONT BRAKE: Sram Code Bronze Stealth, oversized 4-piston caliper, Centerline 220mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads. REAR BRAKE: Sram Code Bronze Stealth, oversized 4-piston caliper, Centerline 203mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads. RIMS: e*thirteen LG1 Plus DH, IW29 29" Hookless, 6069 Welded Aluminum, 30mm internal width, tubeless ready, 32 spokes. SPOKES: e*thirteen custom Hive triple-butted black steel, alloy nipples, nipple washers. FRONT HUB: e*thirteen Boost 20x110mm, triple-sealed, fully machined aluminum, IS 6 bolts. REAR HUB: e*thirteen Superboost 12x157mm, triple-sealed, fully machined aluminum w/6-degree engagement, IS 6 bolts, HG freehub. FRONT TIRE: Michelin DH34 29x2.4, tubeless ready, Magi-X DH compound, double-reinforced DH shield casing, wire bead. REAR TIRE: Michelin DH34 29x2.4, tubeless ready, Magi-X DH compound, double-reinforced DH shield casing, wire bead. GROOVE GUARD: Sram Truvativ Descendant DH, DUB axle, Direct mount chain ring, 165mm CL 56´5. CHAINRING: 34T, steel, X-SYNC. BOTTOM BRACKET: Sram DUB BSA, sealed bearings, 83mm. CHAIN: Sram PC1110 11s, Powerlock. FRONT DERAILLEUR: E.13 Vario Compact Upper Slider, Alloy backplate, DMB (Direct mount Bashguard) Lower Slider 34-36t, ISCG 05 adjustable upper slider. REAR DERAILLEUR: Sram GX DH, 7s, medium cage, X-actuation 1:1. SHIFTER: Sram trigger GX DH 7s, X-actuation 1:1. CASSETTE: Sram PG 720 11-25T, 7s. DERAILLEUR COVER: Mondraker M075. WEIGHT: 16.9kg. *PRO-M STORE OFFERS FREE PREFABRICATION SERVICE FOR THE BIKE: SEAT, FORK, SHIFTER AND BRAKES ARE ALREADY MOUNTED

BICYCLE CANNONDALE TESORO NEO SL EQ REMIXTE The CANNONDALE TESORO NEO SL EQ REMIXTE is a perfect e-city bike for fast rides from one end of the city to the other. The powerful 250Wh battery, positioned inside the frame, simplifies daily travel and, with a single charge, you can travel up to 75km. The transmission system provides pedal assist up to 25km/h. The bike features a convenient rear rack, fenders, front and rear lights to enhance visibility, and a stand so it can be parked anywhere. The lightweight aluminum frame, carbon fork, and hidden transmission make the bike light and easy to handle in any situation. The motor, positioned in the rear hub, and the integrated 250Wh battery in the frame allow easy pedaling both uphill and in city traffic. The iWoc button, located on the top tube, and the iWoc Trio remote control, on the handlebar, allow you to control the assistance and battery level. The Intellimount handlebar attachment allows you to mount a smartphone on the handlebar. Front and rear lights and reflective elements on the frame increase safety and visibility while riding in low light conditions. The riding position is balanced, reasonably upright for maximum visibility and handling yet extended for higher speed. BICYCLE CANNONDALE TESORO NEO SL EQ REMIXTE MAIN FEATURES: Lightweight SmartForm C3 aluminum frame with full carbon fork / “ride-easy” geometry with slanted down tube. ebikemotion drivetrain on the rear hub / internal 250 Wh battery / integrated iWoc ONE control / Autonomy up to 75km. Herrmans front and rear lights / Rack / Fenders / 360° reflectivity. TECHNICAL SPECIFICATIONS FRAME KIT FRAME: Step-thru, SmartForm C3 Alloy, Internal battery, SAVE, tapered head tube, Straightshot hidden cable routing, flat mount disc, rack/fender mounts, 360° reflectivity. FORK: Full carbon, 12x100mm thru-axle, 1-1/4" to 1-1/8" tapered steerer, flat mount disc, fender mounts, 360° reflectivity. HEADSET SERIES: FSA Sealed Bearing, integrated, 1-1/4"-1-1/8". E-SYSTEM DRIVE UNIT: Mahle ebikemotion X35 250W rear hub motor. BATTERY: Mahle ebikemotion X35 250Wh internal downtube battery. BATTERY CHARGE: Mahle ebikemotion X35, 2A. DISPLAY: Mahle ebikemotion iWoc ONE integrated controller, iWoc Trio, smartphone app with Intellimount stem. TRANSMISSION DRIVE: microSHIFT Advent X. SHIFT LEVERS: microSHIFT Advent X, 10-Speed. CHAIN: KMC E10T, 10-speed. CRANKSET: Prowheel, 38T. CASSETTE: microSHIFT, 11-48, 10-speed. BOTTOM BRACKET: Cartridge, square taper. BRAKES BRAKES: Tektro M275 hydraulic disc, 160/160mm rotors. BRAKE LEVERS: Tektro hydraulic disc. WHEELS RIMS: Shining, 32 hole. SPOKES: Stainless Steel (F) 14g / (R) 13g. TIRE BOOTS: Vittoria Terreno Zero, 700 x 35c. TIRE SIZE: 35. WHEEL SIZE: 700c. HUBS: (F) Alloy, 15x100mm thru-axle / (R) EbikeMotion x35. COMPONENTS HANDLEBAR: Cannondale Riser, 6061 Alloy, 18mm rise, 8° back, 4° up, 680mm. STEM: Cannondale 3 with Intellimount, Alloy, 31.8, 6°. GRIPS: Cannondale Fitness Ergo Double Density. SADDLE: Cannondale Fitness Ergo Double Density. SEATPOST: 6061 Alloy, 31.6 x 350mm. ARTICLE CODE C66121U10MD (Size: MD - Color: Black)

REAR DROP OUT FOCUS THRON2 JAM2 AND JARIFA2 BOSCH FROM 2020 AND SAM2 FROM 2021 KD32592000 Aluminum replacement spindle for FOCUS THRON2, JAM2 AND JARIFA2 BOSCH models from 2020 and SAM2 from 2021. weight 17 g. ARTICLE CODE KD325920004

SPECIALIZED BICYCLE ALLEZ E5 DISC Forty years after the launch of the first Specialized Allez on the market, the new Allez. It is the lightest bike in its category and offers more safety, versatility and performance. Whether you are looking for a high-quality alloy bike, a bike for weekends and quick commuting, or you are new to road cycling, the journey to performance starts with the Allez.The bike features an E5 alloy frame, light and fast, and the superior stiffness-to-weight ratio, combined with the unparalleled stopping power of dual-piston disc brakes for all seasons, provides maximum safety at any speed.The bike geometry is the same Endurance geometry as Roubaix to offer maximum comfort when pedaling long kilometers and stable handling.The bike can mount racks and fenders and thanks to a ground clearance up to 35 mm (32 mm with fenders) it is possible to tackle even rougher roads or light off-road. The smooth Shimano shift with 50-34 chainrings at the front and 11-32 cassette at the rear offers all the versatility needed to tackle the most dynamic group rides or to tame the steepest climbs. The 30 mm tires offer compliance at lower pressures, smoothing road irregularities, and a larger contact area for greater safety on every ride.Disc brakes with 160 mm rotors front and rear provide greater stopping power and modulation in any weather condition.The full-carbon fork and the E5 alloy frame with safe and durable road geometry allow you to handle group rides or solo adventures at their best. SPECIALIZED ALLEZ E5 DISC MAIN FEATURES: Lightweight E5 alloy frame. Endurance geometry. Smooth Shimano shifting with 50-34 chainrings at the front and 11-32 cassette at the rear. 30 mm tires. Carbon fork. BIKE DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Specialized E5 Premium Aluminum, flat mount disc, fully manipulated tubing w/ SmoothWelds, internal cable routing, threaded BB, 12x142mm thru-axle. FORK: Specialized FACT full carbon, flat mount disc, 1-1/8" to 1-3/8" taper, fender eyelets, 12x100mm thru-axle. FRONT WHEEL: Axis Sport Disc. REAR WHEEL: Axis Sport Disc. TIES: 700x28-32, Presta valve 48 mm. FRONT TIRE: RoadSport, 700x30 mm. REAR TIRE: RoadSport, 700x30 mm. CRANKSET: Shimano Claris R2000. DERAILLEUR: 50/34T. BB BEARINGS: Praxis 68mm threaded. GEARSHIFT: Shimano Claris, 8 speeds. CASSETTE: SunRace, 8 speeds, 11-32t. CHAIN: KMC X8 w missing link. FRONT BRAKE: Mechanical disc Tektro MD-550. REAR BRAKE: Tektro MD-550. HANDLEBAR: Specialized Shallow Drop, 6061, 70x125mm, 31.8mm clamp. STEM: Specialized S-Wrap. HANDLEBAR STEM: 3D forged alloy, 31.8 mm, 7-degree rise. SADDLE: Body Geometry Bridge Saddle, steel rails. SEATPOST: Alloy, 2-bolt clamp, 12 mm offset, 27.2 mm, anti-corrosion hardware. SEAT CLAMP: Bolt-on type, compatible with 31.8 mm racks. *PRO-M STORE OFFERS THE BIKE PRE-ASSEMBLY SERVICE FOR FREE: SEATPOST, FORK, SHIFTER AND BRAKES ARE ALREADY MATHERED PART CODE 90022-7454 (Size: 54 - Color: LGNBLU/CLGRY/BLZ) / 90022-7256 (Size: 56 - Color: MRN/SILDST/FLORED)

BICYCLE SPECIALIZED TURBO LEVO COMP CARBON 2023 The brand new BICYCLE SPECIALIZED TURBO LEVO COMP CARBON 2023 offers all the incredible power to ride more trails thanks to an unmatched combination of ride quality, power, and range. The new Levo provides incredible power to ride more trails thanks to an unmatched combination of ride quality, usable power, and range wherever. It is the distillation, application, and amplification of 40 years of obsession with creating the world's best mountain bikes. Since its introduction, the Levo has set the benchmark for all other e-MTBs, and the new Levo raises it further. Starting with the Turbo Full Power 2.2 motor and the Turbo Connect (TCU) unit, which provide the Levo high and smooth power that multiplies the pedaling force by 4. The optimized frame features 150 mm of customized rear suspension and a adjustable geometry that offers stable and natural handling like no other. More climbs, more descents, more kilometers, more fun. Equipped with SRAM SX/NX transmission, RockShox trail-appropriate suspension, and a lightweight, durable alloy wheel set, the brand new Turbo Levo offers everything you love about trail riding. BICYCLE SPECIALIZED TURBO LEVO COMP CARBON 2023 MAIN SPECIFICATIONS: The fully integrated Turbo Full Power 2.2 motor, 700Wh battery, and Levo’s advanced MasterMind Turbo Control Unit deliver 90 Nm of torque and 565 watts of power, leader in its class, for five hours of range, letting you go further and faster than ever. The MasterMind Turbo control unit is customizable and lets you see the exact battery level percentage, and features our new MicroTune function to adjust power delivery in 10% increments, so you get exactly the support you need to ride exactly the way you want. The mixed wheel design, with a 27.5 rear and a 29 front wheel, makes the ride agile. The generous cockpit puts you at the heart of the bike, optimizing traction and corner control. The low bottom bracket, low head tube angle, and reduced fork offset maintain stability on rough terrain. Six different geometry settings to easily tune performance for any riding style and terrain. The head tube angle can be adjusted between 63 and 65.5 degrees. The bottom bracket height can be adjusted by 7 mm up or down. The bike's rear travel is 150 mm, offering an incredible pedal response and transferring the force applied fully to the ground. Specialized S-Sizing is based on what matters: rider size and riding style: smaller S sizes will be more agile and snappy, while larger S sizes offer more stability and smoother handling. THE BIKE IS SENT PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME FRAME: Fact 11m full carbon, 29 front wheel, 27.5 rear wheel, fully internal cable routing, 148mm spacing, fully sealed cartridge bearings, 150mm travel, geo-adjustable headset, Horst derailleur hanger. FORK: fox 36 rhythm, 29, offset 44mm, grip damper, s1: 150mm, s2-s6: travel 160mm. REAR SHOCK: fox float x performance, lsr, two-position lever, 55x210mm. MOTOR: Specialized 2.2 custom RX trail tuning. BATTERY: Specialized m3-700, integrated battery, 700 Wh. TRANSMISSION REAR DERAILLEUR: sram gx eagle, 12 speeds. SHIFTERS: sram gx, trigger, 12 speeds. CRANKS: praxis forged M30, custom offset, 160mm. CHAINRINGS: sram x-sync eagle, 104 bcd, 34t, steel. CASSETTE: sram xg-1275, 12 speeds, 10-52 t. FRONT BRAKE: sram code rs, 4-piston caliper, hydraulic rotor, 200mm (S/M), 220mm (L/XL). REAR BRAKE: sram code rs, 4-piston caliper, hydraulic rotor, 200mm. CHAIN: sram nx eagle, 12 speeds. WHEELS RIMS: 29 specialized, hookless alloy, internal width 30mm, tubeless-ready. TIRE SET: front - Butcher, trail grid carcass, gripton® t9 compound, 2bliss ready, 29x2.6 // rear - Eliminator, trail grid carcass, gripton® t7 compound, 2bliss ready, 27.5x2.6. COMPONENTS HANDLEBAR: Specialized 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm width STEM: trail alloy, 35 mm steer tube SEAT: Brifdge comp, cabled cr-mo rails, 155/143 mm. SEAT POST: x-fusion manic, infinitely adjustable, two-bolt head, internal cable routing for lower mounting, remote lever, 34.9, s1: 100 mm, s2: 125 mm, s3: 150 mm, s4/s5: 175 mm, s6: 190 mm. TABLE OF SIZES SIZES HEIGHT S1 (XS) 150-160 CM S2 (S) 157-173 CM S3 (M) 165-180 CM S4 (L) 173-188 CM S5 (XL) 178-193 CM S6 (XXL) 188-203 CM *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, SHIFTER, AND BRAKES ARE ALREADY MOUNTED ARTICLE CODE 95223-5304 (Tg.S4 - Color: WHTSGE/DPLAKE)

MUC-OFF DISC BRAKE COVERS The MUC-OFF DISC BRAKE COVERS protect bike brakes during cleaning and maintenance work or when transporting the bike. The two parts attach to the brake with a closure Velcro and after use it is sufficient to rinse the covers with water and let them dry. MUC-OFF DISC BRAKE COVERS MAIN FEATURES: Protection of disc brakes when performing cleaning and/or maintenance on the bike. Made of breathable neoprene. Easy to install thanks to Velcro fastening. After use rinse with water and let dry. Supplied as a pair. ARTICLE CODE MO-V-189

SPECIALIZED BICYCLE CREO 2 COMP Road or Gravel? Five kilometers or 5 hours? Uphill or on the flats? Suffering or enjoying the view? More powerful or lighter? With the Creo 2 you don’t have to choose anymore, you can have it all. It’s more powerful, has more range, it’s lighter and has ample space to fit wide tires, and let’s not forget the Future Shock 3.0 device! The best in its category, making even impossible rides a pleasure. MAIN SPECIFICATIONS FOR THE SPECIALIZED CREO 2 COMP: POWER: The new TURBO SL 1.2 system is highly efficient and provides a range of up to 190 km. It delivers 33% more power (320 watts) than the previous version, with a very natural pedaling cadence. Torque is 43% higher (50Nm), and the assistance is instant, to tackle steep climbs with agility. Noise is reduced by 40%, so the Creo 2 is exceptionally quiet. TIRE LIGHTING: The Creo 2 runs 700 x 47c tires and has room for tires up to 29" x 2.2. The high-volume tires provide a comfortable and secure ride on rougher surfaces. FUTURE SHOCK 3.0: The Creo 2 with Future Shock 3.0 travel of 20mm at the handlebar reduces impacts by 53%. The hands and handlebars stay steady, for a smoother ride and greater control. This also reduces fatigue during long days in the saddle. CAPABLE GEOMETRY: The progressive geometry of the Creo 2 lets you tackle anything, from long rural roads to the most challenging gravel. A road endurance and ergonomic position keeps you comfortable and gives you the power to pedal all day. TELESCOPIC SEATPOST: With a telescopic seatpost you can lower your center of gravity for greater control when needed. LOAD CAPABILITY: The Creo 2 can accommodate various front, rear, or low-rider racks, or you can mount them all, why not? CONTROL: Our most advanced and intuitive control unit that connects bike, Turbo OS, the Specialized App, and the rider. With MicroTune it’s very easy to fine-tune assistance levels in real time to optimize range. MASTERMIND TCU: The MasterMind TCU is the brain of the bike and shows you all the data you need about your activity. It lets you adjust assistance, and you may receive over-the-air updates so your Creo becomes better over time. It integrates perfectly with the Specialized App. SPECIALIZED APP: With the Specialized App you can customize motor characteristics, log rides, customize the display, and sync your data with other apps. The Turbo System Auto-Lock will deter thieves. TECHNICAL SPECIFICATIONS Weight Weight 14.47 kg (31 lb, 14.4 oz) Measured size 56 Frame Frame FACT 11r carbon, front/rear thru-axles, fully integrated down tube battery, internal cable routing, fender/rack mounts, 12x142mm Fork Future Shock 3.2 w/ Smooth Boot, 12x100mm thru-axle, flat-mount disc Seatpost Collar Specialized Alloy, 31.8 COCKPIT Seat Body Geometry Power Sport Handlebar Clamp Future Stem Comp Handlebar Bend Specialized Adventure Gear Hover, 103mm drop x 70mm reach x 12º flare Saddlepost Trans-X Dropper, 50mm Travel E-BIKE Wiring Custom Specialized wiring harness w/ charge port Charger Custom charger, 48V System w/ SL system charger plug Battery Specialized SL1-320, fully integrated, 320Wh Wheels Front Wheel DT Swiss G540 rim, 24mm internal width, tubeless ready, 24h, Specialized full sealed bearing thru axle hub, centerlock disc, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Rear Wheel DT Swiss G540 rim, 24mm internal width, tubeless ready, 24h, Specialized full sealed bearing thru axle hub, centerlock disc, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Front Tire Tracer Pro, 700x47c Rear Tire Tracer Pro, 700x47c Transmission Gears SRAM X-Sync Eagle, 107 BCD, 44T Rear Derailleur SRAM X1 Eagle AXS Chainring SRAM Alloy DUB Crank Arms Shift Levers SRAM Apex eTap AXS Cog SRAM NX Eagle, 12-Speed Cassette SRAM PG1210, 12-Speed, 11-50t Electronics Motor New Specialized 1.2 SL Custom Lightweight Motor User Interface/Remote Specialized MasterMind TCU, percentage of remaining charge, 120 possible display configurations, MicroTune assist adjustment, over-the-air updates, ANT+/Bluetooth®, w/Handlebar remote Brakes Front Brake Supacaz Super Sticky Kush Rear Brake SRAM Apex eTAP AXS, hydraulic disc Wheels & Tires Inner Tubes 700x32/50mm, 48mm Presta valve Cockpit Handlebar Tape Supacaz Super Sticky Kush

BICYCLE SPECIALIZED TURBO LEVO COMP CARBON When we say -The unbelievable power to ride more trails- we mean that the Turbo Levo represents an unrivaled combination of ride quality, fully exploitable power, and excellent range. The quintessence of 40 years of experience in designing the world’s best mountain bikes. Since its introduction, the Turbo Levo has been a benchmark in the e-MTB market. The Turbo Full Power 2.2 motor with the TCU amplify your pedal push up to 4x, so you can go anywhere. Even the range is unbeatable, up to five hours on the trail. The Levo’s optimized frame features 150 mm of rear travel with a custom tune and adjustable geometry. Because at the end of the day, it’s the quality of your ride that counts. Believe it. More climbs, more descents, more kilometers and more fun. The Turbo Levo Comp is equipped with SRAM GX drivetrain, FOX suspension and light alloy wheels. The integrated Turbo Full Power 2.2 motor with a 700Wh battery and the advanced control unit, the TCU MasterMind, provide 90 Nm of torque and 565 watts of power for an autonomy of up to five hours, to keep you pedaling longer and faster. The TCU MasterMind is a 'hub' of information with a customizable display that includes the exact battery percentage and features the new MicroTune on the handlebar to adjust assistance in 10% increments, so you can have exactly the power you need at any moment. The differentiated wheel design - 27.5" rear and 29" front - creates extremely agile handling. The generous handlebar centers you on the bike to optimize traction and cornering control. The low bottom bracket, relaxed head angle, and reduced fork offset guarantee stability on technical terrain. The Turbo Levo offers six geometry settings, allowing you to tailor performance to your riding style and terrain. The head angle can be adjusted between 63 and 65.5 degrees. The bottom bracket height can be raised or lowered by 7mm. The 150mm travel of the Turbo Levo absorbs both small bumps and large square obstacles, while also delivering incredible pedaling response, with total efficiency. The S-Sizing is based on what matters: rider height and riding style, not saddle height. Six sizes, all with similar head tube lengths and standover, allow you to choose the size that best fits your personal style. The smaller frames will be more agile thanks to shorter reach and stack, while larger ones offer greater stability.

COMPLETE SERVICE KIT FOX DHX2 SHOCK ABSORBER 2016-2020 Complete DHX2 shock rebuild kit (2016-2020).

RENTHAL APEX 31.8 HANDLEBAR STEM The RENTHAL APEX 31.8 HANDLEBAR STEM combines enduro-level stiffness with lightweight XC performance. The 240° closing face is what enables exceptionally high structural rigidity and reliability while keeping weight to a minimum. The Apex is fully CNC-machined, with an oversize central bore, extensive 3-D machining, and an external strap to maximize structural strength and rigidity while minimizing weight. RENTHAL APEX 31.8 HANDLEBAR STEM MAIN FEATURES: Length: 40 mm. Weight: 118 g. Rise: /-6°. Height: 40 mm. Diameter: 1"1/8 x 31.8 mm. Clamp width: 46 mm. Headset clamp: 28.6 mm. ARTICLE CODE RESTM101-BKAG