CANNONDALE MOTERRA 1 BIKE

The CANNONDALE MOTERRA 1 is designed for all mountain and enduro and is perfect for all those who already practice these disciplines. The main triangle of the frame is in carbon while the wagon is in aluminium alloy and has 29" wheels.
As far as geometry is concerned, Moterra 1 has a rather open steering angle of 66° and a seat angle of 75°, which is quite inclined forward in order to guarantee easy pedalling. The excursions reach up to 160mm, the section of the tires is 2.6" and has a good compromise between traction, driveability and safety on downhill.
Each frame of Moterra has a specific calibration of the suspension and slight geometric changes to the infulcro points of the shock absorber and connecting rods thanks to the technology called Proportional Response. This technology allows the suspension kinematics to be modified according to the size of the chassis, so that the best suspension response is always guaranteed. The Proportional Reponse technology is able to optimize traction and suspension response to always guarantee grip on uphill, effective braking on downhill as well as a lively and snappy feeling at any point along the way.
The bike is equipped with the new 250W Bosch Performance Line CX engine and, thanks to the new internal freewheel, the engine and transmission are now decoupled, allowing you to pedal easily even without the electric thrust. The 625 WH Powertube battery is perfectly integrated in the down tube.
The bike is equipped with the 12-speed NX Eagle 11-50 NX SRAM groupset and features Magura MT7 brakes with 4 pistons with oversized 220 mm discs at the front and 203 at the rear. The rims are Stan's NoTubes Flow MK3 with Maxxis DHF/DHR II 3C compound, EXO+.
The bike is equipped with the 160mm Fox Float Factory 36 front fork equipped with FIT Grip2 and 51mm offset, while at the rear a Fox Float Factory DPX2 EVOL with the classic 3 adjustment positions open, pedal and close. The Cannondale telescopic seatpost has a range of 100 mm for size S, 125 mm for size M and 150 mm for L and XL.

CANNONDALE MOTERRA 1 BIKE MAIN FEATURES:

• FRAME: 160mm of travel, BallisTec Carbon Front Triangle, SmartForm C1 Alloy Swingarm, Proportional Response Tuned Suspension, removable battery, alloy motor shield plate, Ai offset transmission, internal cable routing, 148x12mm through-pin, post mount brake, conical head tube.
• FORCELLA: Fox Float Factory 36, 160mm, FIT Grip2 Damper, 15x110, tapered steering, 51mm offset.
• SHOCK: Fox Float Factory DPX2 EVOL, 3-Pos adj.
• RIMS: Stan's NoTubes Flow MK3, 32h, tubeless ready.
• HUBS: (F) Formula 15x110 (R) SRAM 746, 12x148.
• SPOKES: DT Swiss Champion.
• PEDALS: Not included.
• CRANK: Bosch Gen4 w/ custom Ai offset, 34T.
• CHAIN: SRAM NX Eagle, 12-speed.
• SPROCKET: SRAM PG-1230, NX Eagle, 11-50, 12-speed.
• REAR DERAILLEUR: SRAM X01 Eagle.
• SHIFER LEVERS: SRAM GX Eagle, 12-speed.
• HANDLEBAR: Cannondale 3 Riser, 6061 alloy, 15mm rise, 8th sweep, 4th rise, 780mm.
• GRIPS: Fabric Funguy Locking Grips
• STEMCannondale 1, alloy 6061 forged 3D, 1-1/8", 31.8, 7°.
• HEADSET: Integrated and sealed bearing.
• BRAKES: Magura MT7 4-piston hydraulic disc, 220/203mm spider rotors.
• BRAKE LEVERS: Magura MT7 Trail HC hydraulic disc.
• SADDLE: Fabric Scoop Shallow Elite, chrome-mo rails.
• SEATPOST: Cannondale DownLow Dropper, internal passage, 31.6, 100mm (S), 125mm (M), 150mm (L/XL).
• DISPLAY: Bosch Purion.
• BATTERY: Bosch PowerTube, 625Wh.
• BATTERY CHARGER: Bosch 4a.
• DRIVE UNITS: Bosch Performance Line CX 250W.