BICI SPECIALIZED STUMPJUMPER EVO PRO T-TYPE

The Stumpjumper EVO Pro is an uncompromising trail bike. With a new design, S-Sizing geometry, adjustable head angle, and 150mm of travel. Lightweight and capable, with FOX Factory suspension, carbon wheels, and X0 Eagle transmission.

BICI SPECIALIZED STUMPJUMPER EVO PRO T-TYPE KEY FEATURES:

• Mullet setup with a 29-inch wheel at the front and a 27-inch at the rear. Traction and maneuverability like a 29er, agile thanks to the smaller rear wheel.
• Suspension travel is useless without the right kinematics, and we kept this in mind in the design of the Stumpjumper EVO. With what we've learned from developing the Enduro and over 1000 hours of field and lab testing, we've significantly improved pedaling efficiency and created a feeling of capability, efficiency, and liveliness that everyone appreciates.
• We increased anti-squat so that the suspension better resists bobbing, and we also improved shock absorption on sharp obstacles. In short, the Stumpjumper descends with complete control and ascends with agility.
• The S-Sizing geometry of the Stumpjumper EVO is the most progressive. Long, low, relaxed, short offset fork, steeper seat tube, all make you pedal better. But perfect geometry can be different for different riders, that's why for the Stumpjumper EVO you can adjust it to six different positions. Not only can you raise the bottom bracket by 10mm, you can also adjust the head angle by up to two degrees. Finally, if you like the mullet setup, for the Stumpjumper EVO you can mount a 27.5-inch wheel at the rear paired with a 29-inch at the front.
• Rider-First Engineered™ technology is a size-specific design approach to ensure the same ride characteristics for all sizes. So whether you're not exactly a giant and pedal an S1, or if you need the long S6, you'll tackle corners with the same confidence, with an equivalent balance of stiffness, all at the lightest weight possible.
• In 2016, we introduced the SWAT™ compartment in the Stumpjumper frame, so you can store pumps or other items to repair a puncture.

THE BIKE IS DELIVERED PARTIALLY ASSEMBLED BY US*

TECHNICAL SPECIFICATIONS

FRAME

• Seatpost Collar: Alloy, 38.6mm
• Frame: FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel.

SUSPENSION

• Fork: FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
• Rear Shock: FOX FLOAT X2 Factory, Rx Trail Tune, 2-position open/firm lever, HSC, LSC, HSR, and LSR adjustment, S1:210x50mm, S2-S6:210x55mm ".

COCKPIT

• Saddle: Bridge, 155/143mm, Hollow Ti-rails.
• Stem: Deity, 35.0mm
• Grips: Deity Lockjaw.
• Handlebar: Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm.
• Seatpost: Bike Yoke, Revive Max, 34.9 (S1:120mm, S2/S3:160mm, S4/S5: 185mm, S6:213mm).

BRAKES

• Front Brake: SRAM Code Silver Stealth, 4-piston caliper, hydraulic disc, 200mm HS2 Rotor.
• Rear Brake: SRAM Code Silver Stealth, 4-piston caliper, hydraulic disc, 200mm HS2 Rotor.

DRIVETRAIN

• Shifters: SRAM AXS POD Controller.
• Bottom Bracket: SRAM DUB WIDE, BSA 73mm, Threaded.
• Crankset: SRAM X0 Eagle, with Aluminum Guards, DUB, 32T, S1:165mm, S2-S5: 170mm, S6: 175mm.
• Chain: SRAM X0 Eagle Transmission Flattop Chain, 12spd.
• Rear Derailleur: SRAM X0 Eagle Transmission Derailleur.
• Cassette: SRAM X0 Eagle Transmission Cassette, 12spd, 10-52T.
• Gear: 32T.

WHEELS

• Rear Hub: DT Swiss 350, 32h, 12x148.
• Spokes: DT Swiss Competition Race.
• Rear Tire: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3".
• Rims: Roval Traverse 29 HD Carbon, 30mm internal width, 28h: Roval Traverse 27.5 HD Carbon, 30mm internal width, 32h.
• Front Hub: DT Swiss 350, 28h, 15x110.
• Tubes: Standard, Presta.
• Front Tire: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3".

WEIGHT

• Weight: 14.5kg (31lb, 15.5oz).
• Measured size: S4.

*PRO-M STORE OFFERS THE FREE SERVICE OF BIKE PRE-ASSEMBLY: SEATPOST, FORK, GEARSHIFT, AND BRAKES ARE ALREADY MOUNTED