ROCKY MOUNTAIN ALTITUDE POWERPLAY ALLOY 50 BIKE

The ROCKY MOUNTAIN ALTITUDE POWERPLAY ALLOY 50, designed together with the Dyname 4.0 drivetrain, has all the necessary features for aggressive enduro e-biking.
It has the same kinematic geometry and adjustability as the Altitude without any compromise.
The Dyname 4.0 motor is powerful, provides great torque and lasts a long time. That means faster climbs, harder acceleration and a longer-lasting battery.
The Jumbotrone display, located on the top tube, allows you to see the battery status and adjust the assistance level and can be controlled via the control located on the handlebars. The remote control, compared to its predecessors, is smaller and more ergonomic so as to make the handlebars more clean and tidy.
The Dyname 4.0 and the Jumbotron display offer the possibility to adjust both the assistance level and the boost level to adapt to the riding style.
The boost level adjusts torque sensitivity, which is how the engine responds to the input it receives through the pedals, while the assist level adjusts power output, which is the percentage of available power output from the Dyname 4.0 drive system in the different assist modes.
There are four assistance modes and they can be used to manage battery levels, adjust speed, and fine-tune effort: Ludicrous, Trail Plus, Trail, and Eco.
The 720Wh battery is easy to remove and the bike is compatible with the Overtimepack, which gives you an extra 314Wh of battery capacity on top of the 720Wh. This means you have a total of 1,034Wh available before needing a recharge.
The horizontal chainstay can be adjusted by 10mm: longer gives more stability, shorter gives more playfulness to the bike.
The RIDE-4 adjustment system makes it easy to adjust the geometry and suspension with a single Allen key. Four configurations are possible thanks to two small chips.
Additional down tube and chainstay protectors and chain guides, and dual bearings on the chainstays and seatstays for added stiffness and durability.

ROCKY MOUNTAIN ALTITUDE POWERPLAY ALLOY 50 BIKE MAIN FEATURES:

• Enduro E-bike.
• Wheel size: 29".
• Front travel: 170 mm.
• Rear travel: 160 mm.

TECHNICAL SPECIFICATIONS

• FRAME: FORM™ Alloy. Integrated Display. Mid-High Pivot Smoothlink Suspension System. Press Fit BB. RIDE-4™ Adjustable Geometry + Suspension Rate. 160mm Travel. FORM™ Alloy Rear Triangle.
• FORK: RockShox Zeb Select RC 170mm | 44mm Offset.
• SHOCK: Fox Float X Performance | Sealed Bearing Eyelet | 25x8mm F Hardware | All Sizes = 230x62.5mm | Size-Specific tune in FAQ.
• HEADSET: FSA Orbit NO.57E | Sealed 36°x45° Bearings | 30.2mm x 41mm x 7.1mm Upper | 40mm x 51.8mm x 7.5mm Lower | 1.5" Crown Race.
• STEM: Rocky Mountain 35 AM | 5° Rise | All Sizes = 40m.
• HANDLEBAR: Rocky Mountain AM | 780mm Width | 38mm Rise | 9° Backsweep | 5° Upsweep | 35 Clamp.
• GRIPS: ODI Elite Pro Lock On.
• BRAKES: Shimano MT6120 4 Piston | Metal Pads | F: Shimano RT64 203mm | R: Shimano RT64 203mm.
• SHIFTER: Shimano SLX.
• REAR DERAILLEUR: Shimano XT.
• CRANKS&CHAINRINGS: Race Face Ride Cinch 34T | 24mm Spindle | Crank Length: SM - MD = 165mm | LG - XL = 170mm.
• CHAIN: Shimano M6100.
• FRONT HUB: Shimano SLX Boost 15mm.
• REAR HUB: Shimano SLX Boost 148mm.
• SPOKES: DT Swiss Champion 2.0.
• RIMS: WTB ST i30 TCS 2.0 Tubeless | 32H | Tubeless Ready - Tape | Valves Incl.
• TIRES: F: Maxxis Assegai 2.5 WT 3C MaxxGrip DD Tubeless Ready | R: Maxxis Minion DHR II 2.4 WT 3C MaxxTerra DD Tubeless Ready |.
• SEATPOST: Rocky Mountain Toonie Drop Alloy 30.9mm | SM = 125mm | MD = 150mm | LG - XL = 170mm.
• SADDLE: WTB Volt Race 142.
• DRIVE SYSTEM: Dyname 4.0 Mountain Bike Drive | 250w Nominal Power | 700w Peak Power | 108Nm | Rocky Mountain Micro Remote | Low RPM - High Efficiency Classe 1 eMTB System | Designed in Canada.
• BATTERY: 720 Wh Removable Integrated Li-Ion | xxx g.
• REMOTE: Rocky Mountain Micro Remote.
• DISPLAY: Rocky Mountain Jumbotron | Drive System Customization | Battery & Assist Level | Trip | Speed | Cadence | Top Tube Integration.