ORTLIEB SPORT ROLLER CORE BAG

The SPORT-ROLLER CORE is the perfect everyday bag, without frills.

The robust waterproof fabric protects the contents from dirt and moisture. Thanks to its compact size, the bag fits on both the front and rear rack and is also ideal as a first bag for children. The tried-and-tested QL2.1 fastening system is intuitive and allows the bag to be detached from the rack with just one pull and reattached in no time.

ORTLIEB SPORT ROLLER CORE BAG MAIN FEATURES:

• Universal and compact bag for left or right mounting
• With QUICK-LOCK2.1 mounting system for racks with a tube diameter of up to 16 mm
• Included reducing adapters for tube diameter 8, 10, and 12 mm with anti-scratch function to protect the rear rack
• Upper QL hook and lower sliding hook adjustable without tools
• Lower hook rail with anti-scratch function to protect the rear rack
• Symmetric shape allows for use on the right or left side
• Spacious main compartment with roll closure
• PVC-coated polyester fabric, robust and waterproof according to IP64*
• Suitable for rear or front rack (lowrider)
• Optimal for use on children's and youth bikes
• Reflective design elements for increased visibility
• Easy to clean inside

Technical details:

• Material: PD620, PS420 PVC-coated polyester fabric
• Dimensions: approximately 37 x 26 x 16 cm (H x W x D)
• Volume: approximately 14.5 l
• Protection category: IP 64
• Weight: approximately 710 g

*Note: To achieve IP64 protection standard (6=dustproof, 4=resistant to wheel spray coming from all directions), the roll closure must be folded down 3-4 times and fixed at the bottom.

In the box:

• 1 ORTLIEB SPORT-ROLLER CORE bike bag
• Including reducing adapters 8, 10, and 12 mm (2 pairs of reducing adapters each)

Highlights & Technologies:

QUICK-LOCK2.1:

The bicycle bag mounting system QL2.1 is based on the proven QL2 system but has been further upgraded to perfectly fit current pannier rack models.

• Comfortable single-handed operation
• The 16 mm Quick-Lock hooks come with reducing sleeves with anti-scratch function in 8, 10, and 12 mm. For a more secure connection, the reducing sleeves of the QL2.1 are fitted into the base hook from the sides
• For optimal stability, the upper hook rail comes in a single-piece design but can be adjusted to fit either side of the rack on Office-Bag and Downtown models
• A special tightening technique allows the use of particularly flat nut washers on the inside. This makes it almost flat and protects the goods being transported
• The lower hook rail consists of a two-component plastic with an anti-scratch function. The contact surfaces are soft to reduce rubbing against the rack tube. The lower hook rail is rotatable in 15-degree steps and adjustable in height.
• All hooks may be adjusted without tools and replaced within seconds
• The upper rail is compatible with optional theft protection systems

Note: The reflective design elements attached to the clothing as decoration do not represent personal protective equipment as mentioned in EU regulation 2016/425. Thus, they are also not covered by the provisions of the regulation.