Maxxis Minion DHF

MAXXIS MINION DHF EXO TR 29X250K 60 TPI TIRE The Minion DHF tire by maxxis was created to race in the NORBA Downhill championship, as it is able to accompany the rider on any type of trail, even the muddiest or most unstable. The tire features both ramped knobs, ideal for reducing rolling resistance, and knobs with a central channel to increase biting edges, provide stability on the straight and in corners. The Minion DHF tire is well suited both as a rear and as a front, or only on the front if combined with the DHR. The Tubeless Ready system offers installation with or without an inner tube, while the Exo sidewall reinforcement ensures protection from abrasions or possible tears. MAXXIS MINION DHF EXO TR 29X2.50 60TPI TIRE MAIN FEATURES: Manufacturer code: TB96800000 Size: 29x2.50 ETRTO: 55-559 TPI: 27 Weight: 830 g Compound: 42a EXO protection Tubeless Ready technology technologies: EXO: extremely cut- and abrasion-resistant material added to the sidewalls of MTB tires. This layer, obtained with an ultra-light dense weave, does not affect the performance of the tire. TR TUBELESS READY: The maxxis TR tubeless ready version provides the rider with many advantages: the possibility to ride with a lower pressure in the casing, which greatly improves traction; lower rolling resistance compared to a tire with an inner tube; a lower chance of having the tire on the ground. maxxis TR tubeless ready tires have the same advantages as UST tubeless tires without being penalized by the higher weight. For the TR version a standard casing is used and therefore it requires the use of sealant for air retention. maxxis TR tires are the only tires approved for use with sealant.The maxxis TR tubeless ready tires can also be used on non Tubeless wheels with the use of an inner tube.

MAXXIS MINION DHF EXO+ TR 29X2.60 60 TPI 3C TB00096400 TIRE The Minion DHF EXO TR 3C tire by Maxxis is the right tire for Downhill, ideal for loose and muddy terrain. The tire features ramped tread blocks that make rolling resistance minimal and grooved blocks that ensure maximum grip in corners and on the straight. It uses the Maxxterra rubber mix that provides the optimal combination of rebound and grip for high-level performance and the EXO reinforcement on the sidewalls for maximum protection against abrasion and tearing. Tubeless Ready version, it can be mounted with or without inner aria. MAXXIS MINION DHF EXO+ TR 29X2.60 60 TPI 3C MAXXTERRA TB00096400 MAIN FEATURES: Discipline / Use: Downhill / Loose and muddy terrain Dimensions: ERTO 63-622 (29 x 2.60) Casing: 60 TPI Triple compound rubber mix EXO+ protection Tubeless Ready technology Maximum pressure level: 60 psi / 4 bar Weight (manufacturer): 1,080 g Reference: TB00096400 TECHNOLOGIES: 3C MAXX TERRA TRIPLE COMPOUND: Perfect combination of rebound and grip EXO+: Maxxis has combined two already existing technologies, SilkShield and EXO, to create the new casing called EXO+ or more commonly EXO PLUS. The result promises to significantly increase and improve the level of protection against cuts and punctures, while maintaining the usual riding feel offered by EXO tires. Essentially the tire remains soft and flexible, unique characteristics of Maxxis. tutto with solo 12% in more weight. TR TUBELESS READY: The MAXXIS TR tubeless ready version provides the biker with many advantages: the possibility to ride with a reduced pressure of the tire, which greatly improves traction; lower rolling resistance compared to the tire with camera d’aria; fewer chances of having the tire a terra. Maxxis TR tubeless ready tires have the same advantages as UST tubeless tires without being penalized by the greater weight. For the TR version a standard casing is used and therefore it requires the use of sealant for air retention. Maxxis TR tires are the only tires approved for use with sealants.Maxxis TR tubeless ready tires can also be used on non Tubeless wheels with the use of a camera d’aria.

MAXXIS MINION DHF WT EXO+TR 29X250 60TPI 3C MAXXTERRA TB00112000 TIRE The MAXXIS MINION DHF WT EXO+TR 29X250 60TPI 3C MAXXTERRA TB00112000 TIRE is perfect for mounting on Enduro/Freeride MTB and for riding on soft and muddy terrain. The ramped knobs minimize rolling resistance while the grooved knobs ensure maximum grip and control both on straights and in corners. The triple rubber compound MaxxTerra offers a higher level of grip and traction than MaxxSpeed and better efficiency than MaxxGrip.The Exo+ reinforcement combines Exo with Silkshield to ensure total protection against abrasion and tears. The tire can be mounted with or without an inner tube, and the casing is optimized for a rim with 35 mm internal width.Depending on the type of terrain, this tire can be mounted either on the front or the rear. When mounted on the front wheel, the DHR tire should be mounted on the rear wheel. KEY FEATURES OF MAXXIS MINION DHF WT EXO+TR 29X250 60TPI 3C MAXXTERRA TB00112000: Foldable bead. Size: 29x2.50. ETRTO: 63-622. Setup: inner tube/tubeless ready. Terrain: versatile. 60 TPI. Rubber compound: 3C MaxxTerra. Protection: Exo+. Maximum pressure: 50 psi / 3.45 bar. ITEM CODE TB00112000

MAXXIS MINION DHF PLUS TR EXO 27.5X280 K 60TPI TIRE The Minion DHF Plus tire by Maxxis has been made specifically for Enduro and Freeride, as it is extremely safe on every type of terrain. The wheel offers perfect performance in all conditions: the wide side knobs make cornering easier and the tread with a denser groove pattern guarantees excellent control. The Minion DHD II Plus tire is Tubeless Ready, and can be mounted and removed with or without an inner tube, and features Exo reinforcement on the sides which ensures excellent protection against abrasion and tearing. MAXXIS MINION DHF PLUS TR EXO 27.5X280 K 60TPI TIRE MAIN FEATURES: foldable tire dual compound Weight 1040 g Discipline: Enduro and Freeride / From dry to loose terrain Casing: 60 TPI, right balance between strength and lightness EXO protection Tubeless Ready technology Maximum pressure level: 60 psi / 4 bar Maxxis code: TB96908100 technologies: EXO: material extremely resistant to cuts and abrasions added to the sidewalls of MTB tires. This layer, obtained with a super-light dense weave, does not affect the performance of the tire. TR TUBELESS READY: The MAXXIS TR tubeless ready version provides the biker with many advantages: the possibility of riding with reduced tire pressure, which greatly improves traction; lower rolling resistance compared to a tire with inner aria; fewer possibilities of having the tire on the ground. Maxxis TR tubeless ready tires have the same advantages as UST tubeless tires without being penalized by the greater weight. For the TR version a standard casing is used and therefore requires the use of sealant for airtighness. Maxxis TR tires are the only tires approved for use with sealants. Maxxis TR tubeless ready tires can also be used on non Tubeless wheels with the use of an inner aria.

MAXXIS MINION DHF 29X2.50 WT E50 E-BIKE DH 60X2TPI TLR 3C MAXXGRIP TIRE The MAXXIS MINION DHF 29X2.50 WT E50 E-BIKE DH 60X2TPI TLR 3C MAXXGRIP TIRE features a tread that perfectly balances speed and traction when cornering and braking. Depending on trail conditions, the DHF is perfect for being mounted on the rear or on the front in combination with the DHR. MAXXIS MINION DHF 29X2.50 WT E50 E-BIKE DH 60X2TPI TLR 3C MAXXGRIP TIRE MAIN FEATURES: 3C Maxxgrip compound. Diameter: 29". Width: 2.50. Weight (approximate): 1493 g. ETRTO: 63-622. Tubeless ready. E50 also recommended for E-Bikes up to 50 km/h. Category: Trail, Enduro, Downhill. Recommended use: all trail conditions. Recommended installation: front. ITEM CODE TB00472800

MAXXIS MINION DHF WT EXO+TR 27.5X250 60TPI 3C MAXXTERRA TB00112100 TIRE The MAXXIS MINION DHF WT EXO+TR 27.5X250 60TPI 3C MAXXTERRA TB00112100 tire is mounted on Enduro/Freeride MTBs and is perfetto for riding on unstable/muddy terrain. The ramped knobs minimize rolling resistance while the siped ones ensure maximum grip and control both on the straight and in corners. The triple rubber compound MaxxTerra has higher traction and grip than MaxxSpeed and better rolling efficiency than MaxxGrip.The Exo+ reinforcement combines Exo and Silkshield to ensure total protection against abrasion and cuts. The tire can be mounted with or without camera d'aria and the casing is optimized to fit a rim with 35 mm internal width.Depending on the terrain, it can be mounted on the front or rear wheel. When mounted on the front wheel, the DHR tire should be mounted on the rear wheel. MAXXIS MINION DHF WT EXO+TR 27.5X250 60TPI 3C MAXXTERRA TB00112100 MAIN FEATURES: Triple rubber compound MaxxTerra with an excellent balance of traction / grip / rolling efficiency. Additional protection from the Exo+ reinforcement. Tubeless Ready technology. Wide Trail (WT) casing suitable for rims with 35 mm internal width. Flexible bead. Size: 27.5x2.50. ETRTO: 63-584. Mounting: camera d'aria / tubeless. Maximum pressure level: 50 psi / 3.45 bar. ITEM CODE TB00112100

MAXXIS MINION DHF EXO TR 29X2.30 60TPI TIRE The Minion DHF tire by Maxxis was created to race in the NORBA Downhill championship, as it can accompany the rider on every type of trail, even the muddiest or most unstable. The tire features both ramped knobs, ideal for reducing rolling resistance, and knobs with a central channel to increase biting angles, provide straight-line stability and cornering grip. The Minion DHF tire works well both as a rear and as a front, or solo in front when paired with the DHR. The Tubeless Ready system offers setup with or without inner tube, while the Exo sidewall reinforcement ensures protection from abrasions or possible tears. MAXXIS MINION DHF EXO TR 29X2.30 60TPI TIRE MAIN FEATURES: Manufacturer Code: TB96785000 Size: 29x2.30 ETRTO: 55-559 TPI: 27 Weight: 830g Compound: 42a EXO protection Tubeless Ready technology technologies: EXO: extremely cut- and abrasion-resistant material added to the sidewalls of MTB tires. This layer, obtained with an ultra-light dense weave, does not affect the tire’s performance. TR TUBELESS READY: The MAXXIS TR tubeless ready version provides the rider many advantages: the possibility to ride with reduced tire pressure, which greatly improves traction; lower rolling resistance compared to a tire with an inner tube; fewer chances of getting a flat. Maxxis TR tubeless ready tires have the same advantages as UST tubeless tires without being penalized by higher weight. For the TR version a standard casing is used and therefore requires the use of sealant for air retention. Maxxis TR tires are the only tires approved for use with sealants. Maxxis TR tubeless ready tires can also be used on non-Tubeless wheels with the use of an inner tube.

MAXXIS MINION DHF WT DD 29X250 120X2 3C MAXXTERRA TB96800600 TIRE The MAXXIS MINION DHF WT DD 29X250 120X2 3C MAXXTERRA TB96800600 TIRE, tubeless ready and with folding bead, is perfect for riding on soft and muddy Enduro/Freeride and Downhill terrain. The ramped knobs minimize rolling resistance while the grooved ones increase grip. The tire offers perfect grip when riding on straight sections and perfect traction when cornering. The double ply casing has been reinforced with a butyl insert for greater strength and high puncture resistance. Compatible with rims with 35 mm internal width. Depending on the condition of the terrain this tire can be mounted either on the front or on the rear wheel: it can be mounted on the front together with the DHR tire on the rear wheel for greater versatility. MAXXIS MINION DHF WT DD 29X250 120X2 3C MAXXTERRA TB96800600 TIRE MAIN FEATURES: DD (double down) structure for greater strength and puncture resistance. Tubeless Ready. Wide Trail (WT) casing compatible with rims with 35 mm internal width. Folding bead. Size: 29x2.50. ETRTO: 63-622. Use: Enduro/DH/Freeride on soft and muddy terrain. TPI: 240 (120x2). ITEM CODE TB96800600

MAXXIS MINION DHF 29X2.60 WT SKINWALL DUAL 60 TPI TB00220000 TIRE Maxxis tire perfetto for mounting on enduro e-MTBs. It offers excellent grip on loose and muddy terrain thanks to its well-pronounced tread pattern and features Exo+ puncture protection. This tire is perfect for mounting on the front, paired with the Minion DHR on the rear. The tire can be mounted either with or without an inner tube. MAXXIS MINION DHF 29X2.60 WT SKINWALL DUAL 60 TPI TB00220000 MAIN FEATURES: Size: 29 x 2.60. Weight (approx.): 1070 g. Casing: 60 TPI. ETRTO: 66-622. Folding tire. Mounting: Tubeless ready. Max psi: 40. Compound: 3C, EXO. Use: e-bike/enduro. ITEM CODE TB00220000

MAXXIS MINION DHF 3C MAXXGRIP EXO TR 27.5X250 60TPI TB85975200 TIRE The Minion DHF tire by Maxxis was created to race in the NORBA Downhill championship, as it is able to accompany the rider on any type of trail, even the muddiest or most unstable. The tire features both ramped knobs, ideal for reducing rolling resistance, and knobs with a central channel to increase biting edges, provide stability on the straight and in corners. The Minion DHF tire is well suited both as a rear and as a front, or solo on the front if combined with the DHR; in addition, it is equipped with the triple compound rubber mix (3C) MaxxGrip which offers excellent grip and a low rebound rate. MAXXIS MINION DHF 3C MAXXGRIP EXO TR 27.5X250 60TPI TB85975200 TIRE MAIN FEATURES: Misura: 27.5×2.50 WT TPI: 60 Bead: Folding Weight: 980 grams Compound: 3C Maxx Grip Protection: EXO Tubeless Ready: Yes ETRTO: 63-584 Product code: TB85975200 Technologies: TRIPLE COMPOUND 3C MAXXGRIP: Triple downhill compound, perfect for Enduro and DH. It offers excellent grip and a low rebound rate for unmatched grip and traction in downhill. EXO: extremely cut- and abrasion-resistant material added to the sidewalls of MTB tires. This layer, obtained with an ultralight dense weave, does not affect the performance of the tire. TR TUBELESS READY: The MAXXIS TR tubeless ready version provides the rider with many advantages: the possibility of riding with reduced tire pressure, which greatly improves traction; lower rolling resistance compared to a tire with an inner tube; fewer chances of having the tire on terra. Maxxis TR tubeless ready tires have the same advantages as UST tubeless tires without being penalized by the higher weight. For the TR version a standard casing is used and therefore the use of sealant is required for air sealing. Maxxis TR tires are the only tires approved for use with sealants. Maxxis TR tubeless ready tires can also be used on non-Tubeless wheels with the use of an inner tube.

MAXXIS MINION DHF EXO+TR 27.5X260 60TPI 3C MAXXTERRA TB00093700 TIRE The Minion DHF EXO TR 3C tire by maxxis is the right tire for Downhill, ideal for loose and muddy terrain. The tire features ramped knobs that minimize rolling resistance and siped knobs that ensure maximum grip in corners and on the straight. It uses the MaxxGrip rubber compound mix that provides the optimal combination in terms of rebound and grip for high-level performance and the EXO sidewall reinforcement for maximum protection against abrasion and cuts. Tubeless Ready version, it can be mounted with or without an inner tube. MAXXIS MINION DHF EXO+TR 27.5X260 60TPI 3C MAXXTERRA TB00093700 TIRE MAIN FEATURES: Discipline / Use: Downhill / Loose and muddy terrain Size: 27.5x260 Casing: 60 TPI Triple compound rubber mix EXO+ protection Tubeless Ready technology Maximum pressure level: 60 psi / 4 bar Weight (manufacturer): 1,080 g Reference: TB00093700