BCA
BCA ROTOR #Y0D4 203
€89,10
€99,00
BCA #y0d4 203 ROTOR
The BCA #y0d4 203 mm ROTOR has been designed to solve the most common problems found on bike rotors.
The lower steel track, with its special profile, ensures:
better pad grip.
better heat exchange.
less stress from lateral flex under operating temperatures.
Weight: 182 g.
Thickness: 2,150 mm.
The aluminum spider, specific for each diameter, allows the use of low tracks, reduces lateral stresses and lowers the weight.
HOW THE #y0d4 203 MM ROTOR IS ASSEMBLED
The spider and track are riveted ("nailed") in order to reduce the vibrations transmitted from the rotor to the pad and consequently to the pistons.
Braking always remains precise and consistent.
THE ROTOR IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
BCA SRAM MAVEN PADS
€28,67
BCA SRAM MAVEN PADS
The brakes are the most important safety component of the bicycle. The replacement of any brake part must be carried out by a qualified mechanic who must follow the bicycle manufacturer’s procedures. Check rotor wear and, if necessary, replace it. Also check the proper operation of the braking system.Check that the friction surfaces of the pads and the rotor are non touched by grease, oli or altro that could reduce friction properties. non contaminate the friction surfaces with fluids, oli or grease that significantly reduce braking efficiency.New pads must brake for at least 500 meters. The force on the lever must be light and progressively more forte to obtain, step by step, greater braking pressure.
COMPATIBLE WITH SRAM MAVEN
BCA
BCA DISC #Y0D4 220
€89,98
€99,98
BCA DISC #Y0D4 220
BCA disc #Y0D4 220 mm 6-bolt fori ad alte prestazioni. The special construction and machining of the braking track allows to greatly increase braking performance and heat dissipation compared to a traditional brake disc. Thickness 2.4 mm, braking track in steel and spider in ergal. Mounting 6-bolt fori.
BCA DISC #Y0D4 220 MAIN FEATURES:
Made of two non-floating pieces and lighter than one-piece discs.
The spider in ergal attached to the track reduces vibrations transmitted to pads/pistons.
The machined surface with grooves and fins dissipates heat, improving cooling.
Disc thickness 2.4 mm.
Mounting: 6-bolt fori.
Mounting screws non included.
THE DISC IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
BCA SHIMANO SAINT M810 - DEORE - ...
€28,67
BCA BRAKE PADS SHIMANO SAINT M810 - DEORE - M8020 - ZEE - M460 - M9120 - MT520
BCA brake pads compatible with Shimano braking systems. Compatible with Shimano Saint M820, Zee, Deore XT M8000, SLX M71000, Deore M6100 with 4 pistons.
COMPATIBLE WITH:
Saint 4 Piston M810 Shimano Saint, Zee, XT BR-M7120, BR-M8020 - BR-M8120 - BR-MT420 - XTR BR-M9120 - MT501 - MT520 TEKTRO HD-E725 - HD-M735 - HD-M745 - HD-M750 TRP QUADIEM - SL - SLATE T4.
ITEM CODE
B045
BCA
BCA #Y0D4 180 DISC
€89,10
€99,00
BCA DISC #y0d4 180
The BCA DISC #y0d4 180 mm has been designed to solve the most common problems found on bike discs.
The low steel track, with its special profile, guarantees:
better pad grip.
better heat exchange.
less stress from lateral flexion at operating temperatures.
Weight: 148 g.
Thickness: 2.150 mm.
The aluminum spider, dedicated for each diameter, allows working with low tracks, reduces lateral stresses and reduces weight.
HOW THE #y0d4 180 MM DISC IS ASSEMBLED
The spider and track are riveted (“nailed”) so as to reduce the vibrations transmitted from the disc to the pad and consequently to the pistons.
Braking remains always precise and consistent.
THE DISC IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
BCA #Y0D4 160 DISC
€85,50
€95,00
BCA #y0d4 160 ROTOR
The BCA #y0d4 160 mm rotor has been designed to solve the most common problems found on bike rotors.
The low steel track, with its special profile, ensures:
better pad grip.
better heat exchange.
less stress from lateral flex at operating temperatures.
Weight: 114 g.
Thickness: 1,95 mm.
The aluminum spider, dedicated for each diameter, makes it possible to work with low tracks, reduces lateral stresses and lowers the weight.
HOW THE #y0d4 160 MM ROTOR IS ASSEMBLED
The spider and track are riveted (“nailed”) in order to reduce the vibrations transmitted from the rotor to the pad and consequently to the pistons.
Braking remains always precise and consistent.
THE ROTOR IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZING IS NOT GUARANTEED
BCA
BCA SRAM CODE BRAKE PADS
€28,67
BCA SRAM CODE R BRAKE PADS
The brakes are the most important safety part of the bicycle. The replacement of any brake part must be carried out by a qualified mechanic who must follow the procedures of the bike manufacturer. Check the wear of the rotor and, if necessary, replace it. Also check the correct operation of the braking system.Make sure that the friction surfaces of the pads and the rotor are not touched by grease, oli or altro that could reduce the friction properties. Non contaminate the friction surfaces with fluids, oli or grease that greatly reduce the efficiency of the brakes.New pads must brake for at least 500 meters. The force on the lever must be light and progressively stronger to obtain step by step greater braking pressure.
COMPATIBLE WITH:
sram Code R brakes.
SRAM-avid CODE 2011-2013 sram CODE R -RSC-GUIDE RE-DB8-G2 RE
ITEM CODE
B037
BCA
DISC BCA HP2.5 203 MM
€89,10
€99,00
BCA HP2.5 203 MM ROTOR
The BCA HP2.5 203 MM rotor, 203 mm, has been designed to overcome the most common problems encountered on bike rotors even under particularly heavy use.
The low steel braking track, with its distinctive profile, ensures:
Better pad grip.
Better heat exchange.
Reduced lateral bending stresses at operating temperatures.
Weight: 262 g.
Thickness: 2.400 mm.
The aluminum spider, specific to each diameter, allows the use of low tracks, decreases lateral stresses, and reduces weight.
HOW THE BCA HP2.5 203 MM ROTOR IS ASSEMBLED
The spider and track are riveted (“nailed”) to reduce vibrations transmitted from the rotor to the pad and consequently to the pistons; a fixed rotor also improves pad bite in the initial part of braking.
Braking remains always precise and consistent, and the HP2.5 allows E-Bike use even in place of a 3 mm rotor.
THE ROTOR IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
CRANKSET BCA E-BIKE EP-664 135MM
€279,01
EP-664 e-bike crank, CNC-machined from solid material, with a 135 mm crank arm length.
Compatible with Bosch, Brose, Polini, and Yamaha motors.
BCA
BCA HU4C 203MM 6-HOLE BRAKE DISC
€198,99
The lenticular hub is designed to offer:
Higher torsional and axial capacity
Expanded radiating surface → optimized heat exchange
Prevention of foreign object jamming
The hydraulic brake rotor with internal wave profile ensures:
Better brake pad balance
Increased heat dissipation
High resistance to thermal deformation
The result?
More braking power
Greater fatigue resistance
Consistent performance even in extreme conditions
BCA
BCA FORMULA CURA 4 BRAKE PADS
€28,67
BCA FORMULA CURA 4 BRAKE PADS
BCA brake pads compatible with formula cura 4 brake rotors.
ITEM CODE
B048
BCA
BCA HOPE E4 RX4 BRAKE PADS
€28,67
BCA HOPE E4 RX4 BRAKE PADS
The brakes are the most important safety part of the bicycle. The replacement of any brake component must be carried out by a qualified mechanic who must follow the procedures of the bicycle manufacturer. Check the wear of the rotor and, if necessary, replace it. Also check the correct functioning of the braking system.Make sure that the friction surfaces of the pads and the rotor are not touched by grease, oli or altro that could reduce the friction properties. Do non contaminate the friction surfaces with fluids, oli or greases that greatly reduce the efficiency of the brakes.New pads must be used for braking for at least 500 meters. The force on the lever must be light and progressively stronger in order to obtain step by step greater braking pressure.
COMPATIBLE WITH:
Hope E4 RX4.
ITEM CODE
B050
BCA
BCA FORMULA CURA MEGA THE ONE - O...
€28,67
BCA FORMULA CURA MEGA THE ONE - ONE FR - R1 - RX - ROR -R1R BRAKE PADS
BCA brake pads compatible with FORMULA CURA MEGA THE ONE - ONE FR - R1 - RX - ROR -R1R braking systems.
Compatible with the following braking systems:
THE ONE
MEGA
R1
RX
RO
T1
C1
ITEM CODE
B021
BCA
BCA SHIMANO DEORE M515 - M525 - 4...
€28,67
BCA SHIMANO DEORE M515 - M525 - 465 - 475 - 485 - 495 BRAKE PADS
COMPATIBLE WITH:
Compatible with BCA system code BCARS01, braking In.Ca.S 2.0, Shimano Deore and Shimano calipers BR-M575, BR-M525, BR-M515, BR-M505, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M447, BR-M446, BR-M445, BR-M416, BR-M415, BR-M396, BR-M395, BR-M375, BR-M365.
ITEM CODE
B001
BCA
BCA SHIMANO XTR XT 2-PISTON BRAKE...
€28,67
BRAKE PADS BCA SHIMANO XTR XT 2 PISTONS
BCA brake pads for Shimano XTR, XT, SLX, Alfine, XTR M9000 Series, XTR M980 Series, DEORE XT M8100 Series, DEORE XT M8000 Series, DEORE XT M780 Series, SLX M7100 Series, SLX M7000 Series, SLX M670 Series, SLX M660 Series, DEORE M6100 Series, DEORE M5100 Series, DEORE M6000 Series, DEORE M610 Series, ALFINE S7000/S700 Series.
COMPATIBLE WITH:
XTR M9020 - M9000 - M8000 - M7000 - M987 - M988 - M985 SHIMANO XTR (-2018) - CT (2014-) - DEORE BR-CX75 - BR-R315 - BR-R515 - BR-R785 - BR-RS785 - BR-M615 - BR-M785 - BR-785 - SLX BR-M666 - BR-M675 - BR-M7000 - BR-M8000 - BR-M8100 - XTR BR-M9000 - BR-M9020 - BR-M985 - BR-M987 - BR-M988 - ALFINE BR-S700 - BR-M600 - BR-M600.
ITEM CODE
B046
BCA
BCA DISC #Y0D4 180 MM CENTERLOCK
€116,10
€129,00
BCA DISC #Y0D4 180 MM CENTERLOCK
The BCA DISC #y0d4 180 mm centerlock has been designed to solve the most common problems found on bike discs.
The low steel track, with its special profile, guarantees:
better grip for the pad.
better heat exchange.
less stress from lateral flexing at operating temperatures.
thickness: 2.1.
The disc is composed of two non-floating pieces and is therefore lighter than monoblock models. The Ergal spider anchored to the track reduces the vibrations transmitted to pads/pistons, and the grooves/fins on the braking track dissipate heat, helping to cool the disc.
THE DISC IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
COMPLETE BRAKE SYSTEM BCA EL.2.0
€499,19
€779,99
COMPLETE BRAKING SYSTEM BCA EL.2.0
Complete front/rear BCA EL.2.0 braking system with components entirely machined from solid. Complete with pads and without rotors.
LIMITED OFFER FOR THE PRIMA PRODUCTION BATCH
BCA
BCA #Y0D4 203 MM CENTERLOCK ROTOR
€116,10
€129,00
BCA #Y0D4 203 mm CENTERLOCK ROTOR
The BCA #y0d4 203 mm rotor has been designed to overcome the most common problems found on bike rotors.
The lower steel braking track, with its distinctive profile, ensures:
better grip on the pad.
better heat exchange.
less lateral flex stress at operating temperatures.
thickness: 2.1.
The rotor is made of two non-floating pieces and is therefore lighter than a one-piece rotor. The ergal spider anchored to the track reduces the vibrations transmitted to pads/pistons, and the grooves and fins on the braking surface dissipate heat, helping the rotor to cool down.
THE ROTOR IS ANODIZED AND THEREFORE THE UNIFORMITY dell'ANODIZZAZIONE IS NOT GUARANTEED
BCA
BCA MAGURA MT2 - MT4 - MT6 - MT8 ...
€28,67
BCA MAGURA MT2 - MT4 - MT6 - MT8 BRAKE PADS
BCA brake pads compatible with Magura MT2, MT4, MT6, MT8 and MTS - Campagnolo. Compatible with all brakes from 2019.
ITEM CODE
B008
BCA
DISC BCA ROAD 160 MM CENTERLOCK
€112,49
€124,99
BCA DISC #Y0D4 160 MM CENTERLOCK
The BCA ROAD DISC 160 mm centerlock has been designed to address the most common issues found on road bike discs and weighs less than 110 g.
The low steel braking track, with its distinctive profile, ensures:
better pad grip.
better heat exchange.
reduced lateral flex stresses at operating temperatures.
thickness: 1.8
The disc is made of two non-floating pieces and is therefore lighter than one-piece rotors. The Ergal spider anchored to the track reduces vibrations transmitted to pads/pistons, and the grooves/fins on the braking track dissipate heat, aiding disc cooling.
THE DISC IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
BCA SHIMANO RS505 R805 PADS
€28,67
BCA SHIMANO RS505 R805 PADS
The brakes are the most important safety part of the bicycle. The replacement of any part of the brakes must be carried out by a qualified mechanic who must follow the procedures of the bike manufacturer. Check the wear of the disc and, if necessary, replace it. Also check the correct operation of the braking system.Check that the friction surfaces of the pads and the disc are not touched by grease, oils or altro that could reduce the friction properties. Do NON contaminate the friction surfaces with fluids, oils or greases that greatly reduce braking efficiency.New pads must brake for at least 500 meters. The force on the lever must be light and progressively stronger to obtain step by step greater braking pressure.
COMPATIBLE WITH:
(SHIMANO)
RS505 / RS805 Ultegra Disc Road
Dura Ace
BR-RS305
RS405
RS505
RS805
XTR BR-M9100 (2 pistons)
105 BR-R7070
Tiagra BR-4770
GRX BR-RX810
GRX BR-RX400
Metrea BR-U5000
Ultegra BR-R8070
XTR BR-M9100
XTR BR-M9110
XT BR-M8110
SLX BR-M7110
PIN NON INCLUDED
SPRING INCLUDED
ITEM CODE:
B047
BCA
BCA SRAM LEVEL AVID ELIXIR BRAKE ...
€28,67
BCA SRAM LEVEL AVID ELIXIR BRAKE PADS
The brakes are the most important safety part of the bicycle. The replacement of any brake part must be carried out by a qualified mechanic who must follow the procedures of the bike manufacturer. Check the wear of the rotor and, if necessary, replace it. Also check the correct operation of the braking system. Check that the friction surfaces of the pads and rotor are not touched by grease, oli or altro that may reduce the friction properties. Non contaminate the friction surfaces with fluids, oli or grease that greatly reduce the efficiency of the brakes.New pads must brake for at least 500 meters. The force on the lever must be light and progressively stronger to obtain step by step greater braking pressure.
COMPATIBLE WITH:
Elixir CR/R 9/7/5/3/XX/X0/X9/X7
AVID Elixir 1-3-5-7-xx-x0 sram xx-x0-x7-x9-DB - LEVEL - T-TL -RED AXS - RIVAL AXS - FORCE AXS (FLAT MOUNT 2 PIECE) TRICKSTUFF
ITEM CODE
B036
BCA
BCA HU4C 140 MM CENTER LOCK BRAKE...
€198,99
The BCA HU4C 140mm Centerlock is a brake disc designed to ensure consistent performance, high heat dissipation, and maximum reliability even in the most demanding conditions.
Made with a non-floating two-piece structure, it combines lightness and structural rigidity, reducing vibrations and improving braking feel.
Main features
Diameter: 140 mm
Mounting: Centerlock
Braking track thickness: 1.95 mm
Two-piece structure for weight reduction and better thermal dissipation
Ergal spider with specific design to optimize rigidity and stability
Reduction of vibrations on caliper and pads
More modulated, precise, and consistent braking
Compatible with gravel, road, and light MTB use
100% Made in Italy
Braking performance
The particular construction of the disc allows for better heat exchange between the track and the spider, reducing the risk of fading on long descents and maintaining a consistently stable braking response.
Improved lateral rigidity reduces deformation under stress, offering more uniform contact with the pads and a longer lifespan for the braking system.
Why choose it
The BCA HU4C is ideal for cyclists looking for a reliable, lightweight, and high-performing component without compromise, perfect for those who want to improve braking quality while maintaining a professional standard.
BCA
BCA HU4C 160 MM CENTERLOCK BRAKE ...
€198,99
The BCA HU4C 160mm Centerlock is a high-end brake disc designed to offer
maximum braking precision, thermal stability, and vibration reduction even in the most extreme conditions.
Ideal for MTBs and e-bikes, it represents an advanced technical solution for those seeking reliability and consistent performance.
Advanced Technical Construction
Featuring a two-piece non-floating design, the disc reduces overall weight compared to monobloc models
and improves heat dissipation. The braking track works more efficiently, maintaining controlled temperatures even on long descents.
High-rigidity two-piece structure
Ergal spider for vibration reduction
Optimized braking track for thermal stability
Reduced lateral flex under stress
Braking Performance
Thanks to its dedicated technical design, the BCA HU4C ensures consistently modulated, powerful, and constant braking.
Improved contact between pad and disc ensures greater grip and immediate response even in the most demanding situations.
Progressive and controlled braking
Reduced fading on long descents
Longer pad life
Technical Specifications
Diameter: 160 mm
Mounting: Centerlock
Thickness: 1.95 mm
Structure: Two-piece (non-floating)
Spider material: Ergal
Weight: approx. 116 g
Production: Made in Italy
Why Choose It
The BCA HU4C is designed for demanding riders seeking a real upgrade from standard discs:
more control, fewer vibrations, and consistent performance even under high thermal stress.
Perfect for XC, trail, and e-bike use.