BCA
DISC BCA ROAD 160 MM CENTERLOCK
€112,49
€124,99
BCA DISC #Y0D4 160 MM CENTERLOCK
The BCA ROAD DISC 160 mm centerlock has been designed to address the most common issues found on road bike discs and weighs less than 110 g.
The low steel braking track, with its distinctive profile, ensures:
better pad grip.
better heat exchange.
reduced lateral flex stresses at operating temperatures.
thickness: 1.8
The disc is made of two non-floating pieces and is therefore lighter than one-piece rotors. The Ergal spider anchored to the track reduces vibrations transmitted to pads/pistons, and the grooves/fins on the braking track dissipate heat, aiding disc cooling.
THE DISC IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
BCA HANDLEBAR STEM L 33
€130,00
HANDLEBAR STEM BCA L 33
BCA 33 mm handlebar stem: duro e puroMassive like no other: don't ask it to flex.Clamp 35 - Length 33 - Rise 28.3
BCA
BCA LONG XC HANDLEBAR STEM 31.8 6...
€207,40
BCA LONG XC 31.8 65MM -25 DEG HANDLEBAR STEM
Stiffness/weight ratio without compromise.
Machined from solid and designed for coupling without spacers on the headset despite the pronounced negative angle in relation to the actual length
Length 65mm
Angle -25°
Weight 108g including bolts
Handlebar diameter 31.8mm
BCA
BCA DISC #Y0D4 180 MM CENTERLOCK
€116,10
€129,00
BCA DISC #Y0D4 180 MM CENTERLOCK
The BCA DISC #y0d4 180 mm centerlock has been designed to solve the most common problems found on bike discs.
The low steel track, with its special profile, guarantees:
better grip for the pad.
better heat exchange.
less stress from lateral flexing at operating temperatures.
thickness: 2.1.
The disc is composed of two non-floating pieces and is therefore lighter than monoblock models. The Ergal spider anchored to the track reduces the vibrations transmitted to pads/pistons, and the grooves/fins on the braking track dissipate heat, helping to cool the disc.
THE DISC IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
BCA XC SHORT STEM 31.8 50 MM -25M...
€207,40
BCA XC SHORT 31.8 50 MM -25MM DEG STEM
Stiffness/weight ratio without compromises.
Machined from solid and designed for a spacer-free fit on the headset despite the negative angle.
Length 50mm
Angle -25°
Weight 98g including bolts
Handlebar diameter 31.8mm
BCA
BCA SRAM RED HYDRAULIC BRAKE PADS
€28,67
BCA SRAM RED HYDRAULIC BRAKE PADS
BCA brake pads for Sram braking systems
Compatible with: Sram Red 22, Force 22, Rival 22 road and Level ultimate, Level TLM MTB
COMPATIBLE WITH:
RED22 - FORCE 22 - RIVAL 22 - CX1 - APEX 1 - LEVEL TLM & ULTIMATE (-2018) - RED AXS (FLATMOUNT MONOBLOCK).
ITEM CODE
B039
BCA
BCA ROAD DISC 140 MM CENTERLOCK
€116,10
€129,00
BCA ROAD DISC 140 MM CENTERLOCK
The BCA ROAD DISC 140 mm centerlock was designed to address the most common problems found on road bike rotors and has a weight of poco less than 90 g.
The low steel track, with its special profile, ensures:
better grip on the pad.
better heat exchange.
less stress from lateral flex at operating temperatures.
thickness: 1.8
The disc is made of two non-floating pieces and is therefore lighter than one-piece models. The Ergal spider anchored to the track reduces the vibrations transmitted to pads/pistons, and the grooves/fins on the braking surface dissipate heat, aiding the cooling of the disc.
THE DISC IS ANODIZED AND THEREFORE THE UNIFORMITY OF THE ANODIZATION IS NOT GUARANTEED
BCA
BCA MAGURA MT5 - MT7 BRAKE PADS
€32,33
BCA BRAKE PADS MAGURA MT5 - MT7
Two pairs of BCA brake pads compatible with Magura MT5 - MT7. Brake pads compatible with Magura 4-piston braking systems.
ITEM CODE
B009
BCA
BCA HOPE V4 BRAKE PADS
€28,67
BCA HOPE V4 BRAKE PADS
The brakes are the most important safety part of the bicycle. The replacement of any brake component must be carried out by a qualified mechanic who must follow the procedures of the bike manufacturer. Check the wear of the rotor and, if necessary, replace it. Also check the correct functioning of the braking system.Check that the friction surfaces of the pads and rotor are not touched by grease, oli or altro that could reduce the friction properties. Non contaminate the friction surfaces with fluids, oli or grease that greatly reduce the efficiency of the brakes.New pads must brake for at least 500 meters. The force on the lever must be light and progressively stronger to obtain step by step greater braking pressure.
COMPATIBLE WITH:
Hope V4.
Hope V4 TRICKSTUFF Maxima
ITEM CODE
B011
BCA
BCA #Y0D4 203 MM CENTERLOCK ROTOR
€116,10
€129,00
BCA #Y0D4 203 mm CENTERLOCK ROTOR
The BCA #y0d4 203 mm rotor has been designed to overcome the most common problems found on bike rotors.
The lower steel braking track, with its distinctive profile, ensures:
better grip on the pad.
better heat exchange.
less lateral flex stress at operating temperatures.
thickness: 2.1.
The rotor is made of two non-floating pieces and is therefore lighter than a one-piece rotor. The ergal spider anchored to the track reduces the vibrations transmitted to pads/pistons, and the grooves and fins on the braking surface dissipate heat, helping the rotor to cool down.
THE ROTOR IS ANODIZED AND THEREFORE THE UNIFORMITY dell'ANODIZZAZIONE IS NOT GUARANTEED
BCA
BCA LO14 LOW STEM
€175,00
BCA LO14 LOW STEM
Brand new Bca stem, 14 mm, 35 clamp, 14 length, 48.5 rise
BCA
BCA XC SHORT HANDLEBAR STEM 31.8 ...
€207,40
BCA SHORT XC HANDLEBAR STEM 31.8 50 MM -12 DEG
Stiffness-to-weight ratio without compromise.
Machined from solid and designed for a spacerless fit on the headset despite the negative angle.
Length 50mm
Angle -12°
Weight 94g including bolts
Handlebar clamp diameter 31.8mm