Products

Robust. Intuitive. Consistent.With this model, Shimano and the cycling community celebrate the rebirth of Di2 technology on the flagship model, bringing it to the highest level. Thanks to next-generation wireless control, flawless functionality, 12-speed transmission and the excellent build quality that has always distinguished Shimano, you can aim for victory race after race and put even the fiercest competition under pressure. The performance of the XTR brakes will also surprise you once again. In particular, the powerful Enduro M9220 version leaves nothing to chance in terms of braking power. The new design immediately catches the eye: the oil reservoir parallel to the handlebar and the new cable outlet give a clean and tidy look. The contact point close to the grip minimizes unwanted torsion and ensures a much more direct and sensitive braking feel. But the real innovations are found inside: the lever’s pivot point is closer to the handlebar, so the movement follows the finger’s natural arco more closely. Together with the lever inclined 5° upwards, this results in a much more comfortable ergonomic position. Of course, it is always possible to adjust the reach without tools, thanks to a practical dial. The sealing system has been updated and can only be used with low-viscosity (LV) mineral oil. The advantage? High performance across all temperature ranges, ideal even for long descents, and stable bite points. In addition, the responsiveness between the various components is significantly improved. The SM-BH90 hydraulic hose is still a guarantee: flexible enough to follow tight bends, but rigid enough to transmit every braking command without loss. Discreet in appearance but powerful inside: the 4-piston aluminum caliper integrates perfectly with any frame and offers powerful, safe braking in every situation. The updated brake pads reduce noise even on rough terrain. The cooling fins, combined with the caliper structure and the use of high-quality aluminum, ensure efficient heat dissipation, even under prolonged stress. REAR DISC BRAKE SHIMANO XTR M9220 4 PISTONS MAIN FEATURES: Use: All Mountain, Enduro Caliper material: Aluminum Brake lever material: Carbon Lever body material: Aluminum Mounting bolt material: Steel Pistons: 4 Brake mounting: Postmount Recommended brake rotor: Shimano RT-CL 900 Brake fluid: Solo Shimano LV (Low Viscosity) mineral oil Brake hose: Plastic (SM-BH90) Pads: Resin with cooling fins Brake lever type: 2 dita Reach adjustment: Yes, without tools (dial) Bite point adjustment: No Mounting: Right Clamp: Split Hose length: 1700 mm Weight: 325 g

SHIMANO GRX HYDRAULIC DISC BRAKE BR-RX810-F 2-PISTON Equipped with a low-profile Flat Mount design, the Shimano GRX BR-RX810 hydraulic disc brakes offer greater control for riding on mixed terrain. SHIMANO GRX HYDRAULIC DISC BRAKE BR-RX810-F 2-PISTON FEATURES Never hesitate to tackle rough surfaces. Excellent heat dissipation. Ice Technologies. Flat Mount and mud-shedding design. Simplified installation and maintenance. Convenient tool access. Simplified junction system (J-kit). Easy wheel replacement. Simple and clean bleeding system. One Way Bleeding. Caliper Type: Flat mount. ITEM CODE IBRRX810F6RF

SHIMANO GRX HYDRAULIC DISC BRAKE BR-RX810-R WITH 2 PISTONS Rear hydraulic disc brake caliper Shimano GRX 810. Flat mount frame attachment. Suitable for gravel use. SHIMANO GRX HYDRAULIC DISC BRAKE BR-RX810-R WITH 2 PISTONS MAIN FEATURES: Rear hydraulic disc brake caliper Shimano GRX 810. Flat mount attachment. Excellent heat dissipation. Ideal to pair with GRX levers. Simple and quick bleeding system. ITEM CODE IBRRX810RDRF

SHIMANO HYDRAULIC DISC BRAKE BR-MT200 WITH 2 PISTONS The SHIMANO MT200 hydraulic disc brake is designed to offer excellent performance and braking power suitable for beginner cyclists. With its versatile design, it adapts to numerous bicycle styles, ensuring reliable braking and less noise. SHIMANO HYDRAULIC DISC BRAKE BR-MT200 WITH 2 PISTONS FEATURES ONE WAY BLEEDING technology for easy, quick and straightforward installation. SHIMANO hydraulic mineral oil for reliable braking performance. Less pad vibration noise for a quieter riding experience. Pad clearance 40% wider for greater braking efficiency. Choose the SHIMANO MT200 hydraulic disc brake for a safe and reliable braking experience, ideal for beginner cyclists.

SHIMANO BR-MT500 2-PISTON HYDRAULIC DISC BRAKE The SHIMANO BR-MT500 hydraulic disc brake is the ideal choice for cyclists seeking power and reliability. The tapered and stabile design of the master cylinder ensures a smooth and durable braking experience. SHIMANO BR-MT500 2-PISTON HYDRAULIC DISC BRAKE FEATURES Smooth and durable master cylinder design for reliable power and a rigid brake. Insulated pad and piston for optimal braking efficiency. Ideal for all types of riding, from cross-country to trail. Offers maximum reliability and performance in diverse terrain and weather conditions. With the SHIMANO BR-MT500 hydraulic disc brake, you can tackle any route with confidence and precision. Non matter if you are a cross-country rider or a trail enthusiast, this brake will give you the power and performance you need to fully enjoy your riding experience.

REAR DISC BRAKE SHIMANO XTR 4 PISTONS Rear disc brake perfetto for cross-country and enduro. Powerful and high-performance braking system, with carbon lever and magnesium master cylinder body, aluminum caliper and ceramic pistons. Pads included, systems already bled and ready for use. REAR DISC BRAKE SHIMANO XTR 4 PISTONS MAIN FEATURES: Carbon levers. Magnesium master cylinder. Aluminum caliper and ceramic piston. Lever fastening to collar with I-spec technology. Hose length: 1700mm. Servowave technology. Recommended mineral oil. Systems already bled and ready for use. Pads included. ITEM CODE IM9120JRRXSA170

The Sram Level hydr. disc brake is designed for those seeking control, lightness, and reliability on the trails and in the city. Inspired by downhill brake technology but optimized for cross-country and trail use, it offers precise modulation and consistently predictable braking power, so you can focus only on the ride. Whether you're tackling a long technical descent or a fast singletrack, the Sram Level hydr. guarantees a prompt response at the slightest lever pressure, with efficient heat management and simplified maintenance. A clean, modern, and high-performance solution to upgrade your bike's braking system. SRAM FRONT LEVEL DISC BRAKE 950MM WITH 160MM ROTOR MAIN FEATURES: Hydraulic disc braking system designed for XC, trail, and all-mountain use Progressive modulation for precise braking control Consistent and reliable power even on the longest descents Lightweight design to reduce the overall weight of the bike Ergonomic lever for a comfortable grip and immediate response Optimized heat management to reduce the risk of fading Compatible with main Sram caliper mount and rotor standards Simplified maintenance thanks to the easy-to-bleed Sram hydraulic system Ideal as an upgrade to improve your bike's safety and performance TECHNICAL SPECIFICATIONS: Brake rotor diameter (mm): 160 Brake hose length (mm): 950 Brake mounting: Postmount (PM), International Standard (IS) Brand: Sram Group: Level Technologies: Bleeding Edge, DirectLink Transmission fluid: DOT 5.1 Manufacturer part number: 00.5018.106.002 Usage: Front wheel / front Weight: 365 grams Lever material: Aluminum

The EVO GR4 caliper is designed to ensure exceptional performance under heavy-duty conditions. Its main features include: Caliper made from a single piece, which reduces weight and increases rigidity. Four hybrid pistons that allow for smooth movement and optimal heat management. Larger pistons for superior braking power. Larger pistons increase the braking ratio by approximately 6% over the Tech 4 V4 braking system. Increased caliper stiffness for improved power and control. Not compatible with ventilated rotors. Revised hole cap design reduces width for greater frame clearance. Choose this caliper for maximum power in the most demanding applications. HOPE EVO GR4 BRAIDED BLACK FRONT BRAKE MAIN FEATURES: This four-piston braking system is the ideal choice for the most demanding applications. It offers: Maximum power without compromise. Super smooth lever action. Premium construction that makes power control intuitive. It represents the benchmark for use in the gravity discipline and for e-bikes.

HOPE TECH4 V4 BRAIDED FRONT BRAKE The HOPE TECH4 V4 BRAIDED FRONT BRAKE replaces the Tech 3 and is compatible with all Hope calipers. The new master cylinder can be used both in combinazione with the four calipers of the previous model, namely X" Cross Country, E4 Enduro, V4 Downhill and TrialZone for trials. Braking power has been increased by 30%, and this has been made possible both through a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned on the lever pivot, allows for a lighter return spring and makes the use of the brakes less tiring on descents. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated in modo that they can accommodate hybrid stainless-steel pistons with phenolic insert for movimenti that are even smoother and with less maintenance. The brake is sold with Racing organic compound pads designed for minimal fade and maximum power. HOPE TECH4 V4 BRAIDED FRONT BRAKE MAIN FEATURES: More power than the Tech 3. Even more ergonomic lever. Hinged clamp to reduce weight. Hybrid piston design. CNC rigida caliper in un unico piece. Braking power increased by 30%. Pads with Racing compound.

HOPE XCR PRO X2 FRONT BRAKE The new HOPE XCR PRO X2 is an ultra-light brake for cross-country, marathon and trail riding. It is based on the X2 caliper and the lever is made of carbon to reduce weight without sacrificing performance and pivots on new bushings that reduce friction.The master cylinder is integrated into the brake body and positions the lever pivot away from the handlebar: this type of configuration allows for a large hydraulic reservoir for easy and quick bleeding.The brake body is CNC-machined and anodized and the new clamp design makes it easy to install the brake on the MTB.The model features an integrated direct mount for Shimano I-Spec shifters and the lever is adjusted with a 2 mm hex key.The brake uses the X2 caliper but is equipped with lighter pads with aluminum backing plate, a lower profile and a lighter hose connector. HOPE XCR PRO X2 FRONT BRAKE MAIN FEATURES: Lightweight and minimalist design. Carbon lever and titanium hardware. Lever adjustment with 2 mm hex key. CNC machining from high-quality forged aluminum billet. 10% power increase compared to the Race Evo lever. Lightweight pads with aluminum backing plate. Compatible with all current Tech 3 shifter mounts.

SHIMANO MT4100 4-PISTON FRONT BRAKE Shimano brake capable of delivering powerful, reliable, and consistent braking in all situations. It offers safety and control on all descents. Thanks to the faster lever engagement and reduced free stroke, this brake lever ensures intuitive braking and allows you to focus on the trail. Wide gamma of adjustments for a superior Rider tuned setup. SHIMANO MT4100 4-PISTON FRONT BRAKE KEY FEATURES: 90% more braking power in comparison to BR-MT520. 20% increase in braking power compared to the current BR-MT400 with two pistons. 150% more wear resistance in comparison to the current BR-MT400 with two pistons. Brake pad: resin, metallo. Intuitive and powerful braking. Faster brake engagement with shorter free stroke. Rider Tuned cockpit optimized for action. Brake control at alte performance. Additional contact point for a more rigida brake lever. 10-degree rotation angle settings for the I-SPEC EV shift lever. ITEM CODE EMT4204JLFPRA100

HOPE FRONT BRAKE TECH4 E4 BRAIDED The HOPE FRONT BRAKE TECH4 E4 BRAIDED is perfetto for being mounted on enduro MTBs and represents an excellent compromise between power and consistency, and it maintains the same power and bite as the Tech3.Compared to the previous model it has 30% more power and the bearings positioned in place of the springs on the levers improve bite and power.The caliper is the same as the Tech3: the forged aluminum block promotes heat management and the large size of the pistons increases power. HOPE FRONT BRAKE TECH4 E4 BRAIDED MAIN FEATURES: High power. High braking quality. Disc non included. Brake fluid: Dot 5.1. Aeronautical hose length: Front 90 cm. Aluminum lever. Semi-metallic pads. Use: Enduro. Brake: 160 pm front. Compatible with clamp-less shimano I-spec, I-spec II or sram levers with adapters non included. Four-piston caliper. CNC-machined T6 aluminum lever. DISC AND ADAPTER MUST BE PURCHASED SEPARATELY.

HOPE FRONT BRAKE TECH4 E4 SILVER The HOPE FRONT BRAKE TECH4 E4 BRAIDED is perfetto to be mounted on enduro MTBs and represents an excellent compromise between power and consistency, and has the same power and bite as the Tech3.Compared to the previous model it has 30% more power and the bearings positioned in place of the springs on the levers improve the bite and the power.The caliper is the same as the Tech3: the forged block in aluminum favors heat management and the large size of the pistons increases power. MAIN FEATURES OF HOPE FRONT BRAKE TECH4 E4 SILVER: High power. High braking quality. Disc non included. Brake Fluid: Dot 5.1. Aeronautical Hose Length: Front 90 cm. Aluminum lever. Semi-metallic pads. Intended use: Enduro. Brake: 160 pm front. Compatible with shimano I-spec, I-spec II or sram levers without collar with adapters non included. Four-piston caliper. T6 aluminum lever CNC machined. DISC AND ADAPTER NON INCLUDED. TO BE PURCHASED SEPARATELY