MTB

TRICKSTUFF BRAKE MOUNTING CLAMP SRAM SHIFTER 2.0 interface for direct mounting of an SRAM shift lever on Trickstuff disc brake levers. Compatible with SRAM mechanical and electric MatchMaker shifters. Note: the 2.0 interface non is compatible with the new SRAM AXS Eagle Transmission (type T) triggers. Universal right or left mounting. Mounting hardware included. ITEM CODE BCAAAXXSS0000S

MONDRAKER NEAT R BIKE - Frame: Crafty Air full Carbon, Zero Suspension System optimized, 150 mm travel, Forward Geometry, removable internal battery, Boost 12x148 mm rear axle, tapered head tube, one-piece upper link, internal HHG cable routing, sealed bearings with MAX load capacity, oversized 15 mm axles, integrated dropout speed sensor, exclusive plastic motor covers.- Motor: TQ HPR-50- Display: TQ HPR display V01- Battery: TQ HPR-50 360Wh integrated and removable- Battery charger: N/A- Fork: RockShox LYRIK Select Charger RC 29, 160 mm, e-bike approved, tapered steerer tube, Boost 15x110 mm axle, 44mm offset. Settings: low-speed compression, low-speed rebound, air preload- Shock: Rock Shox Super Deluxe Select, 185x55mm, Settings: 2-position compression (Open/Locked), rebound, air preload. Upper Trunnion mount, lower bushings 30x8 mm- Rear derailleur: Sram S1000 Eagle AXS T-Type, 12s- Front derailleur: N/A- Shifter: Sram Eagle AXS Pod MMX, 12s- Cassette: Sram XS-1270, 10-52T, T-Type 12s- Chain: Sram GX Eagle T-Type, 12s, Powerlock- Corona: Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD- Crankset: E.13 Helix Core E*Spec Plus, all sizes: 160 mm- Front brake: Sram DB8 stealth, 4-piston caliper, one-piece Centerline 200 mm brake disc with 6 IS bolts, organic pads with steel backing plate- Rear brake: Sram DB8 stealth, 4-piston caliper, one-piece Centerline 200 mm brake disc with 6 IS bolts, organic pads with steel backing plate- Rotors: N/A- Front tire: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX GRIP compound, EXO+ protection, 60TPI, folding bead- Rear tire: Maxxis Minion DHR II 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 60TPI, folding bead- Rims: Mavic E-CrossRide 29, 30 mm internal width, welded, PFP, tubeless ready, 28 spokes- Front hub: Mavic, Boost 15x110 mm, 6 IS bolts- Rear hub: Mavic, Boost 12x148 mm, ID360 ratchet system, 6 IS bolts, mozzo libero XD- Handlebar: ONOFF S3 1.0 6061 alloy, rise: 25 mm, width: 800 mm, 8º backsweep, 5º upsweep, 31.8 mm barbore. Size L and XL: 1.5 rise.- Stem: ONOFF S3 30 mm 0º, forged 6061 alloy, 31.8 mm barbore- Sella: Fizik Terra Aidon Slim X5- Seatpost: Internal telescopic ONOFF Pija, diameter 31.6 mm, 1X remote lever with bearing, size S: 140-115mm (388-235mm), size M: 160-135mm (428-255mm), size L: 180-155mm (468-275mm), size XL: 210-185mm (528-305mm)- Maximum permitted weight: N/A- Weight: N/A

SELLA fizik terra argo X3 The fizik terra argo X3 is extremely comfortable, has a responsive and comfortable profile and the short nose allows good leg movement. The central channel is not padded so as to prevent painful pressure on the perineum, and the ergonomic cut has been specially created following a detailed pressure analysis carried out in collaboration with medical experts.The shell is made of lightweight and robust carbon and nylon, and the type 2 padding is more cushioned in the ischial zone in order to improve support in an upright position. SELLA fizik terra argo X3 MAIN FEATURES: Versatile short-nose sella that promotes stability and relieves pressure on sensitive areas. Shell made of carbon-reinforced nylon and Kium hollow rail for a high strength-to-weight ratio. Wingflex: The side edges of the shell flex and adapt to the movement of the leg. Type 2 foam with progressive cushioning. Intended use: Gravel. Concepts: This is a product of the fizik Concepts program, an interdisciplinary collaboration of leading industry experts and academics who conduct research and analysis on technology, design, physiology and bicycle fitting in search of solutions to improve performance on the bike. SELLA 150 mm Length: 270 mm. Width: 150 mm. Weight: 238 g. Height at 75 mm width: 47 mm. Length from nose to 75 mm width: 113 mm. Rail: 7x7 mm. SELLA 160 mm Length: 270 mm. Width: 160 mm Weight: 245 g. Height at 75 mm width: 47 mm. Length from nose to 75 mm width: 113 mm. Rail: 7x7 mm. ITEM CODE 70E1SA03A22 (150 mm - Color: black) / 70E2SA03A22 (160 mm - Color: black)

MAXXIS REKON 29X2.60 EXO TR TANWALL BLACK/PARA 60TPI TB00219700 TIRE The MAXXIS Rekon 29x2.60 tire is designed to tackle mountain bike adventures with maximum safety and performance. With EXO TR Tanwall technology and a folding construction, it offers exceptional traction and abrasion resistance. The black design with paracord stripes gives a touch of unico style. MAXXIS REKON 29X2.60 EXO TR TANWALL BLACK/PARA 60TPI TB00219700 TIRE MAIN FEATURES: Size: 29x2.60 inches for perfect grip on a variety of terrains EXO TR Tanwall technology for increased puncture resistance and durability Folding construction to facilitate transport and installation 60 TPI for an optimal combination of lightness, flexibility and strength Ideal for mountain bike trips, offering excellent traction and reliable performance

FOX FLOAT X SHOCK SPACER KIT Kit to adjust the air spring volume of the Fox Racing Shox Float X shock. MAIN FEATURES OF THE FOX FLOAT X SHOCK SPACER KIT: Adjusts the compression curve and resistance. Compatible with Fox Racing Shox Float X. Ideal solution to optimize performance and modify the shock to adapt it to your riding style. Weight (approx.): 49 g. ITEM CODE 803-01-725

SELLA PROLOGO PROXIM NEMBO 145 - T2.0, black The sella PROXIM NEMBO 145 - T2.0, black, designed for gravity disciplines, from All-mountain to Enduro and Downhill, offers optimal comfort thanks to the increased padding on the sides and in the upper part. With a flat forma, suitable for both men and women, and with T2.0 rails (7 mm), it has a misura of 245x135 mm, guaranteeing excellent performance in every situation. Sella PROXIM NEMBO 145 - T2.0, black main features: Designed for gravity disciplines, from All-mountain to Enduro and Downhill. Increased padding on the sides and in the upper part to always ensure maximum comfort. Forma sella: Flat Unisex Rail: T2.0 (7 mm) Misura: 245x135 mm

ROCK SHOX 5WT HIGH PERFORMANCE SUSPENSION FORK OIL 120ML High Performance 5WT oil for suspension forks - 120 ml. ITEM CODE X.11.4315.021.020

MONDRAKER FOXY CARBON RR BIKE The FOXY CARBON RR by Mondraker is the perfect choice for adventure lovers in mountain biking. With its lightweight and durable carbon frame, this model offers exceptional performance on rough terrain and demanding descents. The elegant design and attention to detail make this mountain bike a versatile option for exploring new trails and overcoming challenges on the track. MONDRAKER FOXY CARBON RR BIKE MAIN FEATURES: Carbon frame for increased strength and lightness. High-performance suspension that absorbs shocks and ensures optimal control. Cutting-edge geometry for precise and responsive riding. High-quality components for reliable and long-lasting performance. Eye-catching design and Desert Grey colorway that stands out on the track. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Foxy 29 Stealth Air full carbon, Zero Suspension System, 150mm travel, Forward Geometry, Carbon Monoblock upper link, Boost 12x148mm rear axle, tapered head tube, 73mm BSA bottom bracket, dedicated 1x drivetrain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. SIZES: S: 380mm / M: 420mm / L: 450mm / XL: 500mm. SHOCK: Öhlins TTX Air 205x65mm. Settings: high-speed compression lever with climb mode, low-speed compression, rebound, air preload. Trunnion top mount, 30x8mm bottom bushings. SHOCK ADJUSTMENT: C10 compression, R35 rebound. Volume reducers 16.000 (2xF+1E). FORK: Öhlins RXF 36 M.2 29, 160mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: high-speed compression lever with climb mode, low-speed compression, rebound, air preload, ramp chamber. Fork settings: C20 R40. HEADSET: Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, internal cable routing. STEM: Onoff Sulfur FG 30mm, 6061 forged alloy, 31.8mm barbore. HANDLEBAR: Onoff Sulfur 1.0 double-butted 6061 alloy, rise: 20mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm barbore. GRIPS: Onoff Desert, 1 lock-on, 135mm. SEATPOST: Onoff Pija internal dropper, diameter 31.6mm, size S: 405x95-125mm, size M: 458x120-150mm, size L: 498x140-170mm, size XL: 498x140-170mm. SELLA: SDG BEL-AIR 3.0, LPU foam, steel rails FRONT BRAKE: Sram Code R, oversized 4-piston caliper, Centerline 200mm IS 6-bolt one-piece rotor, steel-backed metal sintered pads. REAR BRAKE: Sram Code R, oversized 4-piston caliper, Centerline 180mm IS 6-bolt one-piece rotor, steel-backed metal sintered pads. BRAKE LEVERS: Sram Code R, tool-free reach adjust. RIMS: e*thirteen LG1 Plus Enduro, IW30 Hookless, 6069 welded aluminum, 30mm internal width, tubeless ready, 28 spokes. SPOKES: e*thirteen custom Hive triple-butted black steel, alloy nipples, nipple washers. FRONT HUB: e*thirteen Boost 15x110mm, triple-sealed, fully machined aluminum, IS 6 bolts. REAR HUB: e*thirteen Boost 12x148mm, triple-sealed, fully machined aluminum with 6-degree engagement, IS 6 bolts, XD freehub. FRONT TIRE: maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead. REAR TIRE: maxxis Minion DHR II 29x2.4 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead. CRANKSET: Sram GX Eagle, Boost, DUB axle, Direct mount chain ring, sizes S/M: 170mm, sizes L/XL: 175mm. CHAINRING: 32T, CNC-machined alloy, X-SYNC 2. BOTTOM BRACKET: Sram DUB BSA, sealed bearings, 73mm. CHAIN: Sram NX Eagle, 12s, Powerlock. REAR DERAILLEUR: Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1. SHIFT LEVER: Sram Trigger GX Eagle, 12s, X-Actuation 1:1. CASSETTE: Sram XG-1275, 10-52T, 12s. DERAILLEUR HANGER: Sram UDH. WEIGHT: 14.5 kg. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

PAIR OF TRICKSTUFF DIRETTISSIMA BRAKES The Trickstuff Direttissima disc brake impresses with its stability, defined bite point and fine modulation. The four pistons of the C42 brake caliper provide great braking power. In terms of ergonomics, the lever reach offers a wide adjustment range. The brake does its job reliably even with higher system weights, for example on e-bikes, and is characterized by excellent heat management. This is due to the use of particularly temperature-stable Bionol, which, among other things, causes no problems even down to -15 °C, stainless steel pistons and POWER+ insulating brake pads. The clear bite point is created by the finely tuned transmission ratio from the lever to the brake and promotes intuitive operation. Trickstuff optimizes the modulation capability by consistently reducing friction in the system: virtually frictionless roller bearings, PU seals at the contact points, high-pressure Kevlar-reinforced hoses and a lever with 4x bearings all contribute. The Direttissima has a progressive braking force characteristic, which means that the more you pull the lever, the more the brakes are applied. The feeling of having to pull ever harder on long descents to achieve the same braking power is a thing of the past. Speaking of the lever: it has been designed in such a way that no surface structure can irritate the user while braking and the finger can slide as the lever is pulled in. This means you do not need to twist your hand, and you can maintain a full grip on the handlebar. The two-piece milled clamp compensates for minimal deviations in handlebar circumference. The brake set consists of parts for the front and rear wheel. PAIR OF TRICKSTUFF DIRETTISSIMA BRAKES KEY FEATURES: Elegant 4-piston disc brake set for mountain bikes (front wheel + rear wheel) Particularly robust and stiff construction in CNC-milled and anodized aerospace aluminum Tool-free reach adjustment with wide adjustment range Functional, slim and lightweight design Improved piston ratio and lever kinematics for high braking power Lever and linkage on ball bearings for optimal modulation, smooth operation and zero play Precision machining for a defined and stable bite point Optimal heat management thanks to polished stainless steel pistons (brake caliper) BIONOL brake fluid: biodegradable vegetable oil with a boiling point of 360 °C (can also be used with mineral oil) Option to mount SRAM/SHIMANO shift levers with optional Trickstuff interfaces Two-piece milled clamp for secure, gentle and torsion-resistant handlebar clamping High-pressure hoses with Kevlar sheath for a stable bite point Supplied with Trickstuff 850 "Power+" brake pads (compatible with brake pads for SRAM Guide/G2) Race tested Suitable for e-bikes Intended use: MTB - Material: 7075 T6 aluminum (body, lever, brake caliper); stainless steel (piston) - Number of pistons: 4 (per brake) - Brake lever: Trickstuff DRT - Brake caliper: Trickstuff C42 (Postmount) - Brake hose: Kevlar - Hose length: 1700 mm rear, 900 mm front (each can be shortened) - Brake fluid: mineral oil, BIONOL vegetable oil - Brake pads: Trickstuff 850 Power+ (organic, nickel-plated steel backing plate) - Reach adjustment: tool-free (adjustment range 47-88 mm) - Adjustable free stroke: no Open clamp: yes (Ø 22.2 mm) Weight: approx. 250 g/brake (incl. pads, milled clamp, filled with 700 mm brake hose - WITHOUT brake disc, adapter) MODULATION: Friction in the system is the enemy of good modulation. The consistent use of roller bearings and special PU seals minimizes the internal friction of the Direttissima, ensuring exceptionally sensitive modulation. BITE POINT: Simple operation is not possible if the bite point is as hard as wood or soft and spongy. The key lies in the ratio between the control pistons and the lever kinematics. The increase in the overall transmission ratio compared to the previous model results in a well-defined but pleasantly elastic bite point. ERGONOMICS: The Direttissima lever has no corners or edges. It has been shaped with specially made milling heads to ensure braking without pressure points even after kilometers of descents. Holes, grooves or recesses have also been omitted to accommodate the finger’s natural sliding movement. - STABILITY: the Direttissima also stands out for the much-cited stability of the CLEG. The polished stainless steel brake pistons and heat-insulating organic pads reduce heat transfer to the brake fluid and protect the seals. With the matching Trickstuff Dächle brake disc (disc thickness 2.05 mm, available separately) it is possible to further optimize the stability of the Direttissima. - CHARACTERISTIC CURVE CURVE: A sophisticated lever mechanism with a knee-lever effect on the Direttissima creates a characteristic curve for braking force. The harder you pull, the greater the transmission ratio – and thus the braking force. ITEM CODE BDRTAFSKPQBSA0002S

ESIGRIPS RIBBED CHUNKY GRIPS The ESIGRIPS RIBBED CHUNKY GRIPS have eight distinct grooves that provide an excellent hand grip on the handlebar and absorb shocks coming from the ground. Outer diameter 32 mm and bar end plugs included. ESIGRIPS RIBBED CHUNKY GRIPS KEY FEATURES: Weight: 60 g. Standard grip length - 5 1/8. Outer diameter: 32 mm. Designed for 22 mm handlebars but can fit down to 19 mm. Bar end plugs included (Install the plugs first to protect the grips and facilitate installation). ITEM CODE RBCHB

CRANK BROTHERS STAMP 7 SILVER EDITION PEDALS The CRANK BROTHERS STAMP 7 SILVER EDITION PEDALS are perfect for enduro, all mountain, freeride and downhill. The profile is low and the base is concave so that the shoe has an optimal contact surface. Cyclists have feet of diverse sizes, ecco why the pedal is available in two diverse sizes. With the high-quality bearings and seals you will have fun for a long time with the Crank Brothers stamp pedal. CRANK BROTHERS STAMP 7 SILVER EDITION PEDALS MAIN FEATURES: Minimal thin profile 11 mm-13 mm. Concave platform for a secure foothold. 10 adjustable pins per side. Premium bearing and sealing system. Adapter to insert grease inside the axle. Stamp Small recommended for shoe sizes: 37-43 (eu). Stamp Large recommended for shoe sizes: 43-49 (eu). Pedal body in forged 6061-T6 aluminum. Inner sliding Igus LL bearing. Outer sliding Igus LL bearing. Axle in forged SCM 435 chromoly steel. Weight size S: 345g (the pair). Weight size L: 375g per pair (the pair). ITEM CODE 16747 (Size S - Color: Silver) / 16746 (Size L - Color: Silver)

SANTA CRUZ TALLBOY C XT BIKE If there has ever been an XC bike for gravity-loving riders, the Tallboy is the right one. The new Santa Cruz Tallboy C XT 29er Mountain Bike with 120 mm travel takes a step forward in what short-travel bikes are really capable of doing. With incredible lower-link VPP suspension, a sleek design, the classic refinement of Santa Cruz and a rather radical geometry, the Tallboy returns as a popular hero that breaks the mold. Sure, 10 mm more travel may seem like just a small step, but combined with a lower-link VPP suspension design, this is a giant leap for the Tallboy. It’s the kind of bike that makes you sprint while climbing, traversing, crossing or descending, thanks to the maximum efficiency of the VPP design and the light, responsive frame. But since it shares the same engineering principles as our long-travel bikes, the progressive shock mounted on the lower link feels at home both in cross-country and in the most extreme conditions. Paired with a 130 mm fork, the new Tallboy becomes even more attractive for riders who like to push to the limit. Established theory suggests that shorter-travel bikes are ridden more slowly, and therefore require steeper, more conservative geometries. In reality, however, when was the last time you slowed down on a fun trail just because you weren’t on a bigger bike? No caution, all adrenalina. So we did the same here, imitating the geometry of our longer-travel bikes to create a bike with a 65.5-degree head angle, a generous front center and a short-offset fork, something rare on a bike of this type. And the radical thinking doesn’t stop there. The super-short 430 mm chainstays of the Tallboy have a +/- 10 mm rear axle adjustment to ensure that riders of all sizes and styles feel equally comfortable. Match this with a relatively low BB (335 mm and a 37.5 mm drop) and you have a combination ready to snap through every corner and launch out the other side. SANTA CRUZ TALLBOY C XT BIKE KEY FEATURES: Fork: FOX 34 Performance Elite, Grip2, 130mm, 29". Shock: FOX Float Performance Elite DPS. Rear derailleur: Shimano XT M8100, 12-speed. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Carbon C Fork: FOX 34 Performance Elite, Grip2, 130mm, 29" Shock: FOX Float Performance Elite DPS Rear derailleur: Shimano XT M8100, 12spd Shifter: Shimano XT M8100, 12spd Brake levers: Shimano XT 8120 Cassette: Shimano XT M8100, 12spd, 10-51t Crankset: Shimano XT M8100, 32t Handlebar: Santa Cruz Bicycles Carbon Riser Stem: Burgtec Enduro MK3 Saddle: WTB Silverado Team Seatpost: RockShox Reverb Stealth Tyres: Front: Maxxis Minion DHF, 29"x2.3", 3C EXO TR Rear: Maxxis Minion DHR II 29"x2.3" EXO TR Headset: Cane Creek 40 IS Integrated *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED

CANNONDALE CHARGING PORT COVER V2 SYNAPSE NEO QUICK NEO Charging port cover for battery charger for cannondale v2 Synapse neo / Quick neo.

ORBEA RISE LT H10 BIKE The new Orbea RISE LT H10 is a bicycle that will take you to new vette of emotion in the mountains. With an innovative design and exceptional performance, this bike is designed to tackle the most demanding challenges of uphill and downhill routes. With the RISE LT H10, you will be able to vivere unforgettable adventures and push your limits to the maximum. ORBEA RISE LT H10 BIKE MAIN FEATURES: Wheel Diameter: 29 Gear Speeds: 12 Motor: Shimano Battery (Wh): 630 Travel (mm): 160 THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Orbea Rise Hydro, 140 mm travel, 29" wheels, Boost 12x148 Motor: Shimano EP801 Display: N/A Battery: Orbea Internal 630Wh Charger: Orbea 2.Generation eBike Smart charger 42V/2-4A Fork: Fox 36 Float Performance 160 Grip 3-Pos QR15x110 Shock: Fox Float X Performance 2-Pos Evol LV, custom tuning, 210x55 mm Rear derailleur: Shimano XT M8100 SGS Shadow Plus Front derailleur: N/A Shifter: Shimano SLX M7100 I-Spec EV Cassette: Shimano CS-M7100 10-51 teeth, 12 speeds Chain: Shimano M6100 Chainring: N/A Crankset: N/A Front brake: Shimano M6120 hydraulic disc Rear brake: Shimano M6120 hydraulic disc Rotors: N/A Front tire: Maxxis Assegai 2.50" 60TPI 3CG/EXO+/TR MaxxGrip Rear tire: Maxxis Assegai 2.50" 60TPI 3CG/EXO+/TR MaxxGrip Rims: Race Face AR 30c Tubeless Ready Front hub: N/A Rear hub: N/A Handlebar: OC Mountain Control MC31, 20 mm rise, width 800 mm Stem: OC Mountain Control MC20, 0º angle Sella: Fizik Terra Ridon X5, width 145 mm Seatpost: OC Mountain Control MC22, 31.6 mm, dropper Maximum permitted weight: N/A Weight: N/A *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

MAXXIS REKON 29x2.60 EXO+ TR 60TPI 3C MAXX TERRA TB00096500 TIRE The Maxxis Rekon 29x2.60 tire is the ideal companion for your mountain bike adventures. With EXO+ technology and 60 TPI, this folding tire offers excellent performance on rough terrain, guaranteeing exceptional traction and durability. Thanks to the 3C MaxxTerra compound, it ensures maximum grip in diverse conditions. Tackle the most demanding trails with confidence and safety. MAXXIS REKON 29x2.60 EXO+ TR 60TPI 3C MAXX TERRA TB00096500 TIRE MAIN FEATURES: Size: 29x2.60 inches EXO+ technology for greater cut and puncture protection 60 TPI for better adaptability to irregular terrain 3C MaxxTerra compound for maximum grip and traction Folding to facilitate transport and replacement in caso of need

SPECIALIZED ROCKHOPPER COMP BIKE 2025 The most requested in summer, with an off-road adventure predisposition, the Rockhopper Comp loves action, it is fast and reliable thanks to its A1 Premium aluminum frame, and it is ready to debut on singletrack. The Rockhopper Comp is equipped with a RockShox Judy fork, alloy wheels, hydraulic disc brakes and Shimano 1x10 drivetrain. SPECIALIZED ROCKHOPPER COMP BIKE 2025 MAIN FEATURES: The lightweight A1 Premium alloy frame is the true cuore of this Rockhopper. Thanks to the butted tubes the weight is reduced while the structure is very resistant. The standover spazio is very generous, there is internal cable routing and the frame is compatible with the use of a dropper seatpost. With the goal of providing the optimal position for every rider, the Rockhoppers are available with two wheel sizes, so maneuverability is ensured for everyone. The hydraulic disc brakes are powerful and intuitive. Single chainring Shimano drivetrain with pulley on the derailleur to make it quiet and to prevent the chain from dropping. Very reliable Formula hubs and hookless alloy rims with 25mm internal diameter; a strong and lightweight combination. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame Seat collar Alloy, quick release, 34.9 Frame Specialized A1 premium butted alloy, zero-stack head tube, internal cable routing, 135x9mm forged dropouts, chainstay-mounted disc brake, replaceable alloy derailleur hanger, stealth rack mounts, dropper post compatible Suspension Fork RockShox Judy, Solo Air, Turnkey damper, 46mm offset, QR, 80/90/100mm travel (size-specific), steel steerer Brakes Front brake Shimano BR-MT200, hydraulic disc, 180mm Rear brake Shimano BR-MT200, hydraulic disc, 180mm Drivetrain Chain KMC, X10, EPT anti-corrosion coating, 10-speed w/ Missing Link™ Rear derailleur Shimano Deore, RD-M5120, 10spd Shifters Shimano Deore, RapidFire Plus, 10-speed Bottom bracket Square-tapered, 73mm, internal bearings, 122.5mm spindle Crankset Stout 1x, forged alloy Cassette Sunrace, 11-46t, 10spd Wheels Front tire FAST TRAK SPORT, 650B/29x2.35 Rear tire FAST TRAK SPORT, 650B/29x2.35 Front hub Formula DC-20, 6-Bolt, disc, 100x9mm spacing, quick-release Rear hub Formula DC-22, 6-Bolt freehub, disc, 135x9mm spacing, quick-release Inner tubes Standard 40mm PV 650B/29x1.75-2.4 Rims Specialized Alloy, hookless, Tubeless ready, 25mm inner width Wheels & tires Spokes Stainless, 14g Cockpit Stem 3D-forged alloy, 31.8mm, 7-degree rise Seatpost Alloy, 2-bolt clamp, 30.9mm Cockpit Handlebar Alloy Mini Rise, 9-degree backsweep, 15mm rise, 31.8mm Sella Bridge Sport, Steel rails, 155/143mm Grips Specialized Trail Grips, lock-on Accessori Pedals Specialized Body Geometry Fitness, Platform, Plastic *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

MONDRAKER KIDS BIKE F-PLAY 26 F-PLAY. THE EBIKES THAT HELP YOU GROWIf you want the little ones at home to feel better when they go mountain biking, you need bikes that help them become better cyclists. This is why at Mondraker we have completely renewed our range of F-Play e-bikes, to achieve the best smile-per-kilometer ratio and maximum fun on two wheels. Adult technology, to design the best e-bikes for children. EBIKE POWER, MUSCULAR FEELINGSThe new F-Play range has been developed in collaboration with the F-Trick range to obtain sensations as close as possible with and without motor. In this way, both models share the kinematics, the Updated Zero Suspension System, the travel, and a frame design that makes them almost indistinguishable from each other. F-Play has a minimalist frame, with a very slim down tube that has the 250Wh battery integrated. Not to be missed in this refresh of the frame made in Alloy Stealth Evo is the distinctive Mondraker window between the top tube, down tube and head tube. The travel has also been increased on the two available 24" and 26" models, going from 100 mm of rear travel to 120 mm on the 24" model and from 120 mm to 130 mm on the 26" model. On the fork we now have 120 mm on the 24" model (100 mm on the previous F-Play) and 140 mm on the 26" model (120 mm on the previous F-Play 26"). F-PLAY ALSO WITH THE NEW ZERO UPDATEF-Play also gets, like the F-Trick range, the update of the ZERO suspension system, as we have recently done with the Neat and F-Podium models. An update that brings greater reactivity in acceleration, with more sensitivity and response from the very first pedal stroke. In this way, every pedal stroke is used to the fullest and the effort is transmitted immediately. This new update also offers the following advantages: • Greater initial sensitivity and higher absorption capacity. • Greater progression in operation. • Lighter system with a better weight/stiffness ratio. • More compact design with less unsprung mass. • Allows longer seatposts. BRING OUT YOUR BEST WITH MAHLE X35As in the Play range of hardtail ebikes for children, F-Play is equipped with the same Mahle E-Bikemotion X35 motor system with a maximum power of 40 Nm and a 250 Wh integrated and removable battery. A system that has 3 assistance modes (Eco, Urban and Sport) adjustable from Mahle’s MySmartbike smartphone application. As with the Play, on the F-Play 26" there is also the possibility to add a 210Wh range extender. FOR TRUE MOUNTAIN BIKINGThe new F-Play range blurs the thin boundaries between a kids’ bike and an adult one. As with the rest of the models in the Kids ranges, F-Play also has 2.4" tires, ONOFF dropper seatpost, 30 mm stems thanks to Forward Geometry and 1X drivetrains with UDH derailleur hanger. It is our kids’ model closest to our adult e-bikes. We use the same technology, the same technical resources and even the same components, so that the little ones feel just like you every time they go out riding. MONDRAKER KIDS BIKE F-PLAY 26 KEY FEATURES: 26" wheels. Zero suspension. Forward Geometry. Stealth Alloy. Mahle x35 THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: F-Play 26 6061 Alloy Stealth evo, hydroformed tubing, Zero Suspension System, 130mm travel, one piece bolt-on upper link, integrated internal non-removable battery, Tapered head tube, HHG internal cable routing, BSA bottom bracket, QR 9mm rear axle, 1x drivetrain compatible SIZES: One size: 350mm. SHOCK: X-Fusion 02PRO R, 165x45mm. Settings: low-speed rebound, air preload. Trunnion top, 50x8mm bottom bushings. SHOCK ADJUSTMENT: A-Tune light compression. FORK: X-Fusion Velvet RL 26, 140mm, air spring, tapered steerer tube, 15x100mm axle, 32mm aluminum stanchions, 41mm offset. Settings: lockout, rebound, air preload. HEADSET: Acros AZX-239 R1 Block Lock 135°, ZS44/28.6 top, ZS56/40 bottom. STEM: Onoff Sulfur FG 30mm 0°, 6061 forged alloy, 31.8mm barbore. HANDLEBAR: MDK XC 1.0, 6061 alloy, rise: 25mm, width: 680mm, 9° backsweep, 5° upsweep, 31.8mm barbore. GRIPS: Onoff Twin, 1lock-on. SEATPOST: Onoff Pija dropper internal, diameter 31.6mm, 1X Remote lever, 405x95-125mm. SELLA: SDG Fly JR. FRONT BRAKE: Sram G2 R, 4 pistonr, Centerline 180mm IS 6 bolts one-piece rotor, steel-backed organic pad. REAR BRAKE: Sram G2 R, 2 piston, Centerline 160mm IS 6 bolts one-piece rotor, steel-backed organic pad. BRAKE LEVER: Sram G2 R, tool-free reach adjust, lever pivot bushings. RIMS: MDK-HP1 26 TLR, 25mm internal width, tubeless ready, 32 spokes. SPOKES: CN round stainless steel. FRONT HUB: DA210FS02, 15x100mm, cup & cone ball bearings, IS 6 bolts. REAR HUB: Mahle-Ebikemotion X-35, HG freehub. FRONT TIRE: Kenda Regolith 26x2.4 120TPI, Folding TLR. REAR TIRE: Kenda Regolith 26x2.4 120TPI, Folding TLR. CRANKSET: Sram SX Eagle, DUB axle, Direct mount chain ring, 155mm. CORONA: 30T, steel, X-Sync. BOTTOM BRACKET: Sram DUB BSA, sealed bearings, 73mm. PEDALS: SDG Slater JR. CHAIN: Sram SX Eagle, 12s, Powerlock. REAR DERAILLEUR: Sram SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1. SHIFTER: Sram Trigger SX Eagle, 12s, X-Actuation 1:1. CASSETTE: Sram PG 1230, 11-50T, 12s. DERAILLEUR HANGER: Mondraker M077. WEIGHT: 17kg. MOTOR: Mahle-Ebikemotion X-35. BATTERY: Mahle-Ebikemotion Internal 250Wh. DISPLAY: Mahle-Ebikemotion. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

FOCUS 2023 SKID PLATE Carbon skid plate for FOCUS JAM2 SAM2 2023.

OHLINS SPRING SHOCK ABSORBER TTX22M 36/113/88 N MM 502 LB 57MM Ohlins spring for TTX 22M shock absorber, lighter than the previous version. ITEM CODE 18075-12

SPECIALIZED FREEWHEEL BODY BMB 00412O1A SHIMANO S202100004 shimano 11-speed freewheel body for Levo 2021 Comp and Comp Carbon, 2021 aluminum stumpjumper, 2021 status. COMPATIBLE WITH: 2022 Epic EVO Comp 2023 Epic EVO 2023 Epic EVO Comp 2023 EPIC EVO COMP BRA 2021 STATUS 140 BASE 2022 Status 140 2022 Enduro Comp 2021 Demo Expert 2022 Turbo Kenevo SL Comp 2022 Chisel 2022 CHISEL HT BASE BRA 2022 Demo Expert 2022 Chisel Comp 2022 FUSE EXPERT 29 2023 Epic HT 2022 CHISEL HT COMP BRA 2022 FUSE SPORT 27.5 2021 STATUS 160 BASE 2023 EPIC HT BASE BRA 2022 CHISEL HT FRM 2022 CHISEL HT LTD FRM 2023 FUSE SPORT 27.5 2022 Epic Hardtail 2022 Epic EVO ITEM CODE S202100004

ORBEA MX 20 TEAM DISC KIDS BIKE The MX 20 TEAM DISC by Orbea is the perfect companion to tackle the most exciting trails with style and performance. Designed to offer a balanced mix of durability, lightness and handling, this bike will allow you to vivere thrilling adventures in sella. ORBEA MX 20 TEAM DISC KIDS BIKE main features: Durable and lightweight aluminum frame for agile and responsive riding Disc brakes for powerful, safe braking in any condition Reliable and precise Shimano drivetrain to tackle any type of terrain Front suspension to absorb shocks and ensure comfort during the ride TECHNICAL SPECIFICATIONS Frame: Orbea MX 20 6061 Aluminum 2024, 135x9 QR, Post Mount Disc Mount, 27.2 Seat Post, Internal Cable Routing, Central kickstand compatible, removable hanger, Fender and Carrier ready. Fork: Orbea MX 20 6061 Aluminum 2024, 100x9 QR, Post Mount Disc Mount Shock: N/A Rear Derailleur: Shimano Acera M3020 Front Derailleur: N/A Shifter: Shimano SL-M315 Cassette: Shimano CS-HG400 11-40t 8-Speed Chain: KMC X8 Corona: N/A Crankset: Extra light 32t, 127mm, w/Chainguard Front Brake: N/A Rear Brake: N/A Rotors: N/A Front Tire: Kenda Booster K1277 20x2.20" 30TPI Rear Tire: Kenda Booster K1277 20x2.20" 30TPI Rims: Alloy, 20", 36H Front Hub: N/A Rear Hub: N/A Handlebar: Orbea Alu integrated cockpit 540mm Stem: N/A Sella: DDK D2005 237x141mm Seatpost: Alloy 27.2x250mm Offset 0 Maximum Permitted Weight: N/A Weight: N/A

Tyre CROSS BOSS - 700X35, black para, TCS LIGHT FAST ROLLING, folding The CROSS BOSS TCS Light/Fast Rolling tyre from Wtb is designed to offer optimal performance on mixed terrain. With Dual DNA technology and 60 TPI, this 700x35 tyre in black para allows you to tackle every adventure in sella to your bike. Tyre CROSS BOSS - 700X35, black para, TCS LIGHT FAST ROLLING, folding main features: TCS Light/Fast Rolling technology for greater smoothness and puncture resistance Dual DNA for an excellent compromise between grip and wear resistance 60 TPI for good flexibility and adaptability to different terrains Folding design to facilitate transport and replacement

MAXXIS FOREKASTER TIRE (GEN 2) 29X2.60 EXO TR 60TPI DUAL TB00460600 The Forekaster (Generation 2) tire from Maxxis is the ideal choice for tackling technical terrain with confidence. With its EXO TR technology and a durable dual-compound casing, it offers exceptional performance and reliable traction. This 29x2.60 tire is designed for smooth and responsive riding, ensuring abrasion resistance that makes it perfect for mountain biking adventures. MAXXIS FOREKASTER TIRE (GEN 2) 29X2.60 EXO TR 60TPI DUAL TB00460600 MAIN FEATURES: Size: 29x2.60 EXO TR technology for increased puncture resistance Durable 60TPI casing for exceptional traction and abrasion resistance Dual compound for smooth and responsive riding

CANNONDALE KIDS BIKE TRAIL 26 The CANNONDALE TRAIL 26 is the perfect MTB for children between 9 and 13 years old with a height between 142 cm and 153 cm. The 26" wheels ensure maximum fun, are easy to handle and keep a low standover height for stability and plenty of room to grow.This bike follows the child’s growth, so the size and geometry are perfectly calibrated for bigger kids who are ready for the next step towards adult bikes.The frame is light and durable and allows easy pedaling uphill and tackling rough terrain. The powerful disc brakes allow quick stopping even on the steepest climbs. CANNONDALE KIDS BIKE TRAIL 26 MAIN FEATURES: Light SmartForm C3 alloy frame and fork with Suntour suspension. Shimano Tourney 8-speed drivetrain and Revo Twist Shifter. Mechanical disc brakes with Tektro cable-actuated levers. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: SmartForm C3 Alloy, StraightShot hidden cable routing, disc brakes, rack/fender mounts. FORK: Suntour NEX, 63mm, coil with preload adjuster. SHIFTERS: microSHIFT, 8-speed trigger shifter. REAR DERAILLEUR: microSHIFT M26L BRAKES: Tektro Mechanical Disc. CRANKSET: Prowheel, Pro-V30, 152 mm length, 30T. CASSETTE: Sunrace, wide range 11-34, 8-speed. CHAIN: KMC X8, 8-speed. FRONT HUB: Sealed Alloy Disc, 12x100mm. REAR HUB: Sealed Alloy Disc. RIMS: Cannondale Disc, double wall w/eyelet, 32h. TIRES: Kenda Small Block 8, 26 x 1.95". HANDLEBAR: 6061 Alloy, 25mm rise, 10° sweep, 30mm rise, 580mm. STEM: Alloy Ahead, 31.8mm. HEADSET: Semi-Integrated, 1-1/8". SADDLE: Cannondale Ergo. SEATPOST: Alloy, 25.4mm. WHEEL SIZE: 26". *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY MOUNTED ITEM CODE C51101U20OS