Hope
HOPE FRONT BRAKE TECH4 V4 SILVER
€220,94
€339,90
FRENO HOPE FRONT TECH4 V4 SILVER
The brand new FRENO HOPE FRONT TECH4 V4 SILVER, which replaces the Tech3, is compatible with Hope calipers and the master cylinder can be used in combination with the four calipers of the previous model, namely X" Cross Country, E4 Enduro, V4 Downhill and TrialZone for trials. Braking power has been increased by 30%, and this has been made possible both through a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned on the lever pivot, allows for a lighter return spring and makes using the brakes less tiring on descents. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated in modo to accommodate hybrid pistons in stainless steel with phenolic insert for movimenti that are even smoother and require less maintenance. The brake is sold with Racing organic compound pads designed for minimum fade and maximum power.
FRENO HOPE FRONT TECH4 V4 SILVER MAIN FEATURES:
More power than the Tech 3.
Even more ergonomic lever.
Hinged clamp to reduce weight.
Hybrid piston design.
CNC rigida caliper in un unico piece.
Braking power increased by 30%.
Pads with Racing compound.
Hope
HOPE TECH4 V4 BRAIDED FRONT BRAKE
€220,94
€339,90
HOPE TECH4 V4 BRAIDED FRONT BRAKE
The HOPE TECH4 V4 BRAIDED FRONT BRAKE replaces the Tech 3 and is compatible with all Hope calipers. The new master cylinder can be used both in combinazione with the four calipers of the previous model, namely X" Cross Country, E4 Enduro, V4 Downhill and TrialZone for trials. Braking power has been increased by 30%, and this has been made possible both through a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned on the lever pivot, allows for a lighter return spring and makes the use of the brakes less tiring on descents. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated in modo that they can accommodate hybrid stainless-steel pistons with phenolic insert for movimenti that are even smoother and with less maintenance. The brake is sold with Racing organic compound pads designed for minimal fade and maximum power.
HOPE TECH4 V4 BRAIDED FRONT BRAKE MAIN FEATURES:
More power than the Tech 3.
Even more ergonomic lever.
Hinged clamp to reduce weight.
Hybrid piston design.
CNC rigida caliper in un unico piece.
Braking power increased by 30%.
Pads with Racing compound.
Hope
HOPE TECH4 V4 BRAIDED REAR BRAKE
€220,94
€339,90
HOPE TECH4 V4 BRAIDED REAR BRAKE
The HOPE TECH4 V4 BRAIDED REAR BRAKE replaces the Tech 3 and is compatible with all Hope calipers. The new master cylinder can be used in combination with all four calipers of the previous model, namely X2 Cross Country, E4 Enduro, V4 Downhill and TrialZone for trial. Braking power has been increased by 30%, made possible both by a different hydraulic ratio and thanks to a smaller diameter master cylinder. The new seals reduce friction in the hydraulic system: this feature, together with the roller bearings positioned on the lever pivot, allows for a lighter return spring and makes using the brakes on descents less tiring. The hinged clamp further reduces the weight of the brake while the reservoir is positioned at the lower stack height. The V4 calipers have been updated in modo da poter ospitare pistoni ibridi in acciaio inossidabile con inserto fenolico per movimenti ancora più fluidi e minore manutenzione. The brake is sold with Racing organic compound pads designed for minimal fade and maximum power.
HOPE TECH4 V4 BRAIDED REAR BRAKE KEY FEATURES:
Greater power than the Tech 3.
Even more ergonomic lever.
Hinged clamp to reduce weight.
Hybrid piston design.
Pinza rigida CNC in un unico pezzo.
Braking power increased by 30%.
Racing compound pads.
Hope
HOPE TECH4 LEFT BRAKE PISTON CAP
€11,66
€12,96
LEFT HOPE TECH4 BRAKE MASTER CYLINDER CAP
It fits solo the new Tech 4 reservoir and non the old Tech 3.
Hope
RIGHT HOPE TECH BRAKE MASTER CYLI...
€11,66
€12,96
RIGHT MASTER CYLINDER CAP FOR HOPE TECH BRAKE
Replacement right master cylinder cap for Hope Tech 4 brake levers.
Hope
HOPE REPLACEMENT DIAPHRAGM FOR TE...
€3,51
€3,90
HOPE REPLACEMENT DIAPHRAGM FOR TECH4 LEVER
Replacement diaphragm for tech4 lever that separates impurities and air from the hydraulic system for precise braking.
ITEM CODE
HBSP405
Hope
HOPE FRONT BRAKE TECH4 E4 SILVER
€207,99
€319,99
HOPE FRONT BRAKE TECH4 E4 SILVER
The HOPE FRONT BRAKE TECH4 E4 BRAIDED is perfetto to be mounted on enduro MTBs and represents an excellent compromise between power and consistency, and has the same power and bite as the Tech3.Compared to the previous model it has 30% more power and the bearings positioned in place of the springs on the levers improve the bite and the power.The caliper is the same as the Tech3: the forged block in aluminum favors heat management and the large size of the pistons increases power.
MAIN FEATURES OF HOPE FRONT BRAKE TECH4 E4 SILVER:
High power.
High braking quality.
Disc non included.
Brake Fluid: Dot 5.1.
Aeronautical Hose Length: Front 90 cm.
Aluminum lever.
Semi-metallic pads.
Intended use: Enduro.
Brake: 160 pm front.
Compatible with shimano I-spec, I-spec II or sram levers without collar with adapters non included.
Four-piston caliper.
T6 aluminum lever CNC machined.
DISC AND ADAPTER NON INCLUDED. TO BE PURCHASED SEPARATELY
Hope
HOPE SILICONE LUBRICANT 30 ML
€6,89
€7,66
HOPE SILICONE LUBRICANT 30 ML
Hope Silicon Lube is ideal for brake system maintenance or repair. It is used to facilitate the assembly of all seals and also reduces piston friction.
ITEM CODE
HTTLUBE
Hope
HOPE TECH4 E4 Rear Brake Silver
€207,99
€319,99
HOPE REAR BRAKE TECH4 E4 SILVER
The HOPE REAR BRAKE TECH4 E4 is perfetto to be mounted on Enduro MTBs and is the perfetto compromise between power and consistency, with the same power and bite as the Tech3. Compared to the previous model it has 30% higher power and the bearings positioned in place of the springs on the levers improve bite and power.The brake caliper is the same as the Tech3: the block forged in aluminum promotes heat management and the large piston size increases power.
HOPE REAR BRAKE TECH4 E4 SILVER KEY FEATURES:
Brake fluid: Dot 5.1.
Aerospace Hose Length: rear 160 cm.
Aluminum lever.
Semi-metallic pads.
Discipline: Downhill/Freeride, Enduro.
DISK AND ADAPTER non INCLUDED. TO BE PURCHASED SEPARATELY
Hope
MOUNTING CLAMP HOPE MATCHMAKER LE...
€22,41
€24,90
HOPE MATCHMAKER LEFT MOUNTING CLAMP TECH 4 SHIMANO I-SPEC EV
The HOPE TECH 4 Shimano I-Spec EV right fixing collar pairs the left Shimano I-Spec EV shifter with the TECH4 brake lever. The mounting evita taking up spazio on the handlebar.
HOPE MATCHMAKER LEFT MOUNTING CLAMP TECH 4 SHIMANO I-SPEC EV KEY FEATURES:
Secures brake and shifter.
In cnc-machined aluminum.
Compatible with right Hope Tech 4 brake lever.
Compatible shifter: Shimano (left side).
Weight: 14 g.
ITEM CODE
HBSP431LN
Hope
HOPE TECH V4 E4 PISTON
€8,60
€9,56
HOPE TECH V4 E4 PISTON
Piston for Hope Tech V4 E4 brake caliper.
ITEM CODE
HBSP136
Hope
HOPE 220 MM FLOATING DISC
€80,91
€89,90
HOPE 220 MM FLOATING ROTOR
The HOPE 220 MM FLOATING ROTOR has a braking surface made of stainless steel riveted to a central aluminum carrier, is extremely light and can expand or contract with temperature changes. Specific for road bikes.
MAIN FEATURES OF HOPE 220 MM FLOATING ROTOR:
Braking surface with rounded edge.
The rotor is machined with a radius on the inner and outer edge.
2-piece floating design.
Hope
HOPE hydraulic oil 250 ml DOT 5.1
€11,61
€12,90
HOPE hydraulic oil 250 ml dot 5.1
Hope hydraulic oil is the oil for cleaning Dot 5.1 brakes in a 250 ml size.
HOPE hydraulic oil 250 ml dot 5.1 TECHNICAL SPECIFICATIONS
Capacity: 250 ml
Packaging: Bottle/Can
Product Type: DOT Brake Fluid
Dry boiling point (°C): min. 260.
Wet boiling point (°C): min. 180.
Viscosity at -40°C (mm²/s): max. 900.
Hope
HOPE Tech 3 V4 Pads (Standard)
€20,61
€22,90
HOPE TECH 3 V4 PADS (Standard)
The original Hope Tech 3 V4 disc brake pads offer exceptional braking performance in the most extreme conditions, even on wet or muddy terrain.
They are made from a material with a high coefficient of friction, able to make the Hope Tech 3 pads absolutely unbeatable in termini di performance!
HOPE TECH V4 STANDARD PADS MAIN FEATURES:
Compatibility: For Hope Tech 3 V4 Brakes
Option: Standard
COD. ART. 505516805004
Hope
HOPE TECH4 E4 BRAIDED REAR BRAKE
€207,99
€319,99
HOPE REAR BRAKE TECH4 E4 BRAIDED
The HOPE REAR BRAKE TECH4 E4 BRAIDED is perfect to be mounted on enduro MTBs and represents an excellent compromise between power and consistency and retains the same power and bite as the Tech3.Compared to the previous version it has 30% more power and the bearings positioned instead of the springs on the levers improve the bite and the power.The caliper is the same as the Tech3: the forged aluminum block promotes heat management and the large size of the pistons increases power.
MAIN FEATURES OF HOPE REAR BRAKE TECH4 E4 BRAIDED:
Brake fluid: Dot 5.1.
Aeronautical hose length: rear 160 cm.
Aluminum lever.
Semi-metallic pads.
Use: Downhill/Freeride, Enduro.
ROTOR AND ADAPTER MUST BE PURCHASED SEPARATELY.
Hope
HOPE FRONT BRAKE TECH4 E4 BRAIDED
€207,99
€319,99
HOPE FRONT BRAKE TECH4 E4 BRAIDED
The HOPE FRONT BRAKE TECH4 E4 BRAIDED is perfetto for being mounted on enduro MTBs and represents an excellent compromise between power and consistency, and it maintains the same power and bite as the Tech3.Compared to the previous model it has 30% more power and the bearings positioned in place of the springs on the levers improve bite and power.The caliper is the same as the Tech3: the forged aluminum block promotes heat management and the large size of the pistons increases power.
HOPE FRONT BRAKE TECH4 E4 BRAIDED MAIN FEATURES:
High power.
High braking quality.
Disc non included.
Brake fluid: Dot 5.1.
Aeronautical hose length: Front 90 cm.
Aluminum lever.
Semi-metallic pads.
Use: Enduro.
Brake: 160 pm front.
Compatible with clamp-less shimano I-spec, I-spec II or sram levers with adapters non included.
Four-piston caliper.
CNC-machined T6 aluminum lever.
DISC AND ADAPTER MUST BE PURCHASED SEPARATELY.
Hope
HOPE REAR HUB PRO 5 148 MM 28 HOL...
€255,92
€319,90
HOPE REAR HUB PRO 5 148 MM 28H BOOST
The HOPE REAR HUB PRO 5 148 MM 28H BOOST is the result of 30 years of experience in the design and production of high-quality drivetrain components, with the aim of using proven technology to meet the needs of current and future cycling technology.
MAIN FEATURES OF HOPE REAR HUB PRO 5 148 MM 28H BOOST:
Improved sealing to prevent dirt ingress and reduce rolling resistance.
The new labyrinth seal has zero resistance and ensures incredible freewheel performance.
New pawl and spring design to increase durability, load capacity and reduce rolling resistance.
Increased engagement from 44 to 108 with a new 6-offset-pawl hub design.
Pawls cut flush in high-strength steel for maximum robustness.
New stepped axle design for a stiffer and longer-lasting hub.
New hub body profile for greater stiffness without increasing weight.
Fully serviceable and rebuildable with simple tools.
Spacers can be easily replaced to fit different frame and axle standards.
6-bolt disc mounting.
NB: indicate in the order notes if you want the Sram XD, Shimano HG or Shimano MS freehub body
Hope
HOPE TECH 4 sram LH SHIFTER MOUNT
€22,41
€24,90
HOPE TECH 4 SRAM LH SHIFTER MOUNT
The ideal component to tidy up the handlebar and give it a clean look. The Hope Tech 4 Sram Shifter Mount will allow you to mount your Sram shifter on the clamp of the Hope brake lever.
ITEM CODE
HBSP426LS
Hope
HOPE TECH3 BRAKE LEVER CLAMP
from €13,84
€20,65
CLAMP FOR HOPE TECH3 BRAKE LEVER
The CLAMP FOR HOPE TECH3 BRAKE LEVER allows you to securely fasten the Tech3 lever to your MTB handlebar.
CLAMP FOR HOPE TECH3 BRAKE LEVER KEY FEATURES:
Compatible with Hope Tech3 brake levers.
in aluminum.
ITEM CODE
HBSP316B (Color: Blue) / HBSP316N (Color: Black) / HBSP316O (Color: Orange) / HBSP316P (Color: Viola) / HBSP316R (Color: Red) / HBSP316S (Color: Argento)
Hope
HOPE Adapter (C) Post to Post (F-...
€19,71
€21,90
HOPE ADAPTER (C) POST TO POST (F-203/R-203)
HOPE brake adapter (C) Postmount to postmount (F-203/R-203)
Hope
HOPE REPLACEMENT PISTON FOR TECH4...
€21,41
€23,79
HOPE REPLACEMENT PISTON FOR TECH4 BRAKE LEVER
Replacement piston for Hope Tech4 brakes complete with sealing rings and spring for Hope Tech 4 brake levers. Compatible with DOT5.1 brake fluid.
ITEM CODE
HBSP423C
Hope
HOPE EVO GR4 BRAIDED BLACK REAR B...
€314,91
€349,90
The EVO GR4 caliper is designed to ensure exceptional performance under heavy-duty conditions. Its main features include:
Caliper made from a single piece, which reduces weight and increases rigidity. Four hybrid pistons that allow for smooth movement and optimal heat management. Larger pistons for superior braking power. Larger pistons increase the braking ratio by approximately 6% over the Tech 4 V4 braking system. Increased caliper stiffness for improved power and control. Not compatible with ventilated rotors. Revised hole cap design reduces width for greater frame clearance. Choose this caliper for maximum power in the most demanding applications.
HOPE EVO GR4 BRAIDED BLACK REAR BRAKE MAIN FEATURES:
This four-piston braking system is the ideal choice for the most demanding applications. It offers:
Maximum power without compromise.
Super smooth lever action.
Premium construction that makes power control intuitive.
It represents the benchmark for use in the gravity discipline and for e-bikes.
Hope
HOPE EVO GR4 BRAIDED BLACK FRONT ...
from €314,91
€349,90
The EVO GR4 caliper is designed to ensure exceptional performance under heavy-duty conditions. Its main features include:
Caliper made from a single piece, which reduces weight and increases rigidity. Four hybrid pistons that allow for smooth movement and optimal heat management. Larger pistons for superior braking power. Larger pistons increase the braking ratio by approximately 6% over the Tech 4 V4 braking system. Increased caliper stiffness for improved power and control. Not compatible with ventilated rotors. Revised hole cap design reduces width for greater frame clearance. Choose this caliper for maximum power in the most demanding applications.
HOPE EVO GR4 BRAIDED BLACK FRONT BRAKE MAIN FEATURES:
This four-piston braking system is the ideal choice for the most demanding applications. It offers:
Maximum power without compromise.
Super smooth lever action.
Premium construction that makes power control intuitive.
It represents the benchmark for use in the gravity discipline and for e-bikes.
Hope
HOPE REAR HUB PRO 5 148 MM BOOST ...
€255,99
€319,99
HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE
The HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE combines 30 years of experience with the needs of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was reducing drag in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system with new springs.Another important update to the rear hubs is the increase in engagement points (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any one time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in practical terms you get a fast feel on the trail while keeping crank movement at an acceptable level without compromising hub free movement or its reliability.The hub is sold with a freehub body specifically designed for e-bikes: all six pawls engage simultaneously, which both reduces lag and increases load capacity and durability. The freehub is made entirely of stainless steel for better stability and wear resistance.The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows for larger bearings to be mounted in a better arrangement to fit the latest freehub standards while at the same time increasing load capacity.
HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE MAIN FEATURES:
Hub shell machined from forged 2014 T6 Aluminium.
6-bolt disc brake system.
Stainless steel sealed cartridge bearings.
Labyrinth seal.
NB: in the order notes indicate which freehub body you want to mount between shimano microspline, shimano hg steel and sram xd.