-37% sale
PARK TOOL STEERER SAW GUIDE FOR CARBON BLAD... €55,90 €88,21
The Park Tool SG-8 is the steerer saw guide designed for carbon-specific hacksaw blades, which are wider than traditional ones. Clamped onto the tube, it guides the blade through the whole cut and delivers a straight, clean fork steerer cut, as well as on handlebars, seatposts and other round tubes. The slot accepts blades up to 2.5 mm (3/32") wide, which is what you need to work with carbon blades such as the Park Tool CSB-1. The body is made of non-scratching composite that will not mark the tube surface, with steel threads and a steel reinforcing plate for heavy shop use. The working range is 22 to 33 mm in diameter and includes 1", 1 1/8" and 1 1/4" fork steerers. Clamp the guide onto the tube and cut, letting the SG-8 keep the blade in line through the whole stroke. Where to use the Park Tool SG-8 saw guide for carbon blades Shortening carbon fork steerers with a composite-specific blade. Cutting round handlebars from 22 to 33 mm. Shortening round seatposts. Any other round tube within the guide's diameter range. Why choose the Park Tool SG-8 Slot sized for carbon blades up to 2.5 mm wide. Compatible with 1", 1 1/8" and 1 1/4" fork steerers. Non-scratching composite body that respects the tube finish. Steel threads and reinforcing plate for professional use. Pairs with the Park Tool CSB-1 blade and the Park Tool SAW-1 hacksaw. For traditional steel hacksaw blades, Park Tool recommends the SG-6 guide instead. For anyone regularly working on carbon forks, handlebars and seatposts, the Park Tool SG-8 saw guide for carbon blades is the natural companion to the dedicated blade. TECHNICAL SPECIFICATIONS GeneralCode: SG-8Type: saw guide for round tubesRecommended blade: carbon-specific hacksaw blade DimensionsTube diameter: 22 to 33 mm (0.87"–1.3")Maximum blade width: 2.5 mm (3/32") MaterialsBody: non-scratching compositeReinforcement: steel threads and steel reinforcing plate Compatibility1", 1 1/8" and 1 1/4" threadless fork steerersHandlebars, seatposts and other round tubes from 22 to 33 mmPark Tool CSB-1 carbon cutting blade and Park Tool SAW-1 hacksaw
-37% sale
PARK TOOL ADJUSTABLE OVERSIZED SAW GUIDE 22... €49,90 €78,10
The Park Tool SG-7.2 is the adjustable oversized saw guide for precisely shortening seatposts, fork steerers and handlebars. It accepts round tubes from 22 to 45 mm and aero profiles up to 70 mm wide, so it also covers aero seatposts and seat masts as well as most other round tubes. The body is made of hardened steel, with molded contact points that protect tubes and frames while clamping. The SG-7.2 has two separate cutting slots: one for standard hacksaw blades and one for the width of carbon-specific blades. The same guide therefore works on both metal and carbon parts: simply choose the right slot for the blade fitted to the saw. Once clamped on the tube, the guide keeps the blade in line through the whole stroke for a straight, clean cut even on the largest profiles. Where to use the Park Tool SG-7.2 adjustable saw guide Shortening round and aero seatposts. Cutting aero seat masts. Reducing fork steerer length. Cutting handlebars and most other round tubes. Why choose the Park Tool SG-7.2 Wide working range: round tubes from 22 to 45 mm and aero profiles up to 70 mm wide. Two cutting slots, for standard blades and carbon blades. Hardened steel body built for the workshop. Molded contact points that protect the surface of tubes and frames. Pairs with the Park Tool SAW-1 hacksaw and the Park Tool CSB-1 carbon cutting blade. For workshops servicing modern bikes with aero seatposts and seat masts, as well as traditional steerers and handlebars, one guide covers most shortening cuts. The Park Tool SG-7.2 adjustable oversized saw guide combines versatility and strength for precise cuts on every type of tube. TECHNICAL SPECIFICATIONS GeneralCode: SG-7.2Type: adjustable saw guideCutting slots: two, for standard blades and carbon blades DimensionsRound tubes: 22 to 45 mm (0.87"–1.75")Aero profiles: up to 70 mm (2.75") wide MaterialsBody: hardened steelContacts: molded contact points to protect tubes CompatibilityAero seatposts and seat masts, fork steerers, handlebars and most round tubesStandard blades and Park Tool CSB-1 carbon cutting bladePark Tool SAW-1 hacksaw
-39% sale
PARK TOOL 4-PIECE SHOP SCREWDRIVER SET PHIL... €19,90 €32,10
The Park Tool SD-SET brings together all four Park Tool shop screwdrivers in one kit, designed for comfort and durability. This shop screwdriver set includes two Phillips and two flat blade screwdrivers for everyday bicycle work, both in the professional workshop and on the home bench. Each screwdriver has a dual-density grip that offers a comfortable, secure hold even during long work sessions. Tips and shafts are heat-treated to resist wear and keep their shape over time. The set includes the SD-0 and SD-2 models with #0 and #2 Phillips tips and the SD-3 and SD-6 models with 3 and 6 mm flat blades. Where to use the Park Tool SD-SET screwdrivers Adjustments on derailleurs and other components that use Phillips or slotted screws. Small and large Phillips screws, with the #0 and #2 tips. Fine and sturdy slotted screws, with the 3 and 6 mm blades. Fitting and maintaining accessories in the workshop and at home. Why choose the Park Tool SD-SET All four Park Tool shop screwdrivers in one purchase. Dual-density grip for comfort and control. Heat-treated tips and shafts for long life. Two Phillips and two flat blade tips in one kit, each identified by its own Park Tool code (SD-0, SD-2, SD-3, SD-6). Shop quality designed for intensive, everyday use. To complete the workbench with reliable tools for daily use, the Park Tool SD-SET 4-piece shop screwdriver set is a solid, long-lasting basic kit. TECHNICAL SPECIFICATIONS GeneralCode: SD-SETNumber of screwdrivers: 4 MaterialsGrip: dual-densityTips and shafts: heat-treated ContentsSD-0: #0 Phillips screwdriverSD-2: #2 Phillips screwdriverSD-3: 3 mm flat blade screwdriverSD-6: 6 mm flat blade screwdriver
-36% sale
PARK TOOL CONE WRENCH 22MM PARK TOOL SCW-22 €8,90 €13,90
The Park Tool SCW-22 is the 22mm cone wrench from the Shop Cone Wrench line, the shop cone wrenches Park Tool makes in all sizes found on bicycle hubs. It is used to adjust and replace hub bearings by working on the adjusting cones. Park Tool designed the "Y" head to put more material where strength and durability are needed. Precision sizing and a military-grade industrial phosphate finish ensure an accurate, consistent fit, and the long vinyl-dipped handle lets you apply force comfortably. Where to use the Park Tool SCW-22 22mm cone wrench Adjusting hub bearings on cones with 22 mm wrench flats. Removing and refitting cones when replacing hub bearings. Working on other components with narrow wrench flats, such as suspension top caps. Not for components with wide flats such as pedals or axle nuts: this may damage the component or the wrench. Why choose Park Tool SCW-22 Thin profile suited even to the narrowest adjusting cones. Precise sizing and consistent quality in the 22 mm size. "Y" head that adds material where strength and durability are needed. Long vinyl-dipped handle, comfortable during adjustments. For adjusting and overhauling cup and cone hubs in the 22 mm size, the Park Tool SCW-22 22mm cone wrench is a professional shop choice. TECHNICAL SPECIFICATIONS GeneralCode: SCW-22Type: shop cone wrenchSize: 22 mmUse: hub bearing adjustment and replacement MaterialsHead: "Y" designFinish: military-grade industrial phosphateHandle: long, vinyl-dipped CompatibilitySuitable for: components with narrow wrench flats (hub adjusting cones, suspension top caps)Not suitable for: components with wide flats (pedals, axle nuts)
-37% sale
PARK TOOL 18-PIECE SOCKET AND BIT SET 3/8 D... €54,90 €86,40
The Park Tool SBS-1.3 is an 18-piece set of sockets and bits selected for the most common bicycle repairs. This 3/8" drive socket and bit set brings together hex bits, Torx-compatible bits and hex sockets of shop quality, ready to fit a torque wrench, ratchet handle or breaker bar. All pieces are made of chrome vanadium steel and share the same 3/8" square drive, so a single handle works with every size. The set includes standard and long-reach hex bits, long-reach T25, T30 and T40 Torx-compatible bits and six hex sockets from 8 to 15 mm. It is completed by a 1" socket that fits several Park Tool freewheel, cassette lockring and bottom bracket tools, including the FR-1.3, FR-5.2 and BBT-22. How to use the Park Tool SBS-1.3 socket and bit set Controlled tightening of 3 to 10 mm hex bolts with the bits fitted to a torque wrench. T25, T30 and T40 Torx fasteners, reachable even in recessed positions thanks to the long-reach bits. 8, 9, 10, 13, 14 and 15 mm hex nuts and bolts with the dedicated sockets. Using the 1" socket with the Park Tool FR-1.3, FR-5.2 and BBT-22 to work on freewheels, cassette lockrings and bottom brackets with a ratchet or torque wrench. The set is not designed for impact drivers or other power tools: use it with hand tools only. Why choose the Park Tool SBS-1.3 18 pieces chosen for the most frequent bike jobs, with no unnecessary sizes. Chrome vanadium steel for long life in the workshop. Single 3/8" drive, compatible with torque wrench, ratchet and breaker bar. Long-reach bits to get to deeply recessed bolts. 1" socket that extends the use of other Park Tool tools. For mechanics who want to tighten every bolt precisely starting from a complete yet essential base, the Park Tool SBS-1.3 18-piece socket and bit set is the ideal starting point for the workbench. TECHNICAL SPECIFICATIONS GeneralCode: SBS-1.3Number of pieces: 18Drive: 3/8" squareUse: hand tools only (not for impact drivers or power tools) MaterialsMaterial: chrome vanadium steel CompatibilityHandles: torque wrench, ratchet, breaker bar1" socket: Park Tool FR-1.3, FR-5.2, BBT-22 and others ContentsHex bits: 3 - 4 - 5 - 6 - 8 mmLong-reach hex bits: 5 - 6 - 10 mmLong-reach Torx-compatible bits: T25 - T30 - T40Hex sockets: 8 - 9 - 10 - 13 - 14 - 15 mm1" socket: 1 piece
-36% sale
PARK TOOL SUSPENSION BEARING TOOL KIT PARK ... €313,90 €488,40
The Park Tool SBK-1 is a professional-level tool kit for removing and installing cartridge bearings in bicycle suspension pivots. Please note: this is not a kit of replacement bearings, but the suspension bearing tool kit used to replace them on the rear triangles and linkages of full suspension bikes in a precise, controlled way. At the heart of the system are 27 precision-machined, hard-anodized guides, sized to cover a wide range of bearing inner and outer diameters. Combined with Park Tool's proven bearing press design, the guides push out the worn bearing and seat the new one perfectly square in its bore. Everything is organised in a convenient storage case, so every size is easy to find at the bench. How the Park Tool SBK-1 tool kit works Extractor cups and drifts for outer diameters of 16, 17, 19, 20.6, 21, 22, 22.3, 24, 26, 28, 28.6, 30, 32 and 35 mm. Extractor studs and pilots for inner diameters of 8.5-9, 10, 12, 12.7, 15, 17 and 20 mm. The outer guide rests on the linkage structure while the press pushes the bearing out of its bore; during installation the guides keep the bearing aligned. Extraction requires at least 3 mm of flat linkage surface around the bearing to support the cup or drift. Where this surface is missing, Park Tool recommends the SHX-1 slide hammer bearing extractor as an alternative. Why choose the Park Tool SBK-1 27 precision-machined, hard-anodized guides. Wide coverage of suspension bearing inner and outer diameters. Removal and installation with the same press system, with bearings seated square. Storage case to keep the kit tidy and complete. A kit designed for professional workshops that work regularly on full suspension bikes. For anyone who services suspension pivots on a regular basis, the Park Tool SBK-1 suspension bearing tool kit is the complete solution for working without improvising. TECHNICAL SPECIFICATIONS GeneralCode: SBK-1Type: tool kit for removing and installing suspension pivot cartridge bearings MaterialsGuides: precision-machined, hard-anodized CompatibilityOuter diameters (OD): 16, 17, 19, 20.6, 21, 22, 22.3, 24, 26, 28, 28.6, 30, 32, 35 mmInner diameters (ID): 8.5-9, 10, 12, 12.7, 15, 17, 20 mmRequirement: at least 3 mm of flat linkage surface around the bearing for extraction Contents27 precision guidesStorage case
-13% sale
Park Tool PARK TOOL CHAINRING LOCKRING TOOL... €36,99 €42,10
The Park Tool LRT-5 is a chainring lockring tool designed to remove and install the direct-mount chainring lockring on Fazua Ride 60 e-bike drivetrains. It fits lockrings with a 41 mm outside diameter and 16 notches, and is also compatible with Shimano Ultegra BBR60 and Deore XT MT-800 bottom brackets. The tool is precision machined for a close fit with the notches, essential when applying high torque without the tool slipping or damaging the lockring. It offers two ways to work: a 3/8 inch drive fitting for ratchets and torque wrenches, and 36 mm wrench flats for use with an adjustable wrench or a crow foot. Heat-treated and plated 4140 steel construction provides wear resistance and long service life. Compatibility of the Park Tool LRT-5 chainring lockring tool Direct-mount chainring lockrings on Fazua Ride 60 e-bike drivetrains Shimano Ultegra BBR60 bottom brackets Shimano Deore XT MT-800 bottom brackets Lockrings with 41 mm outside diameter and 16 notches Ratchets and torque wrenches with 3/8 inch drive, or an adjustable wrench or 36 mm crow foot Why choose Park Tool LRT-5 Dedicated tool for the Fazua Ride 60 system, increasingly common on lightweight e-bikes 3/8 inch drive for tightening to the correct torque with a torque wrench 36 mm wrench flats as an alternative when not using a ratchet Heat-treated and plated 4140 steel, made for continuous shop use Precise fit that protects the lockring notches For workshops servicing e-bikes with the Fazua Ride 60 motor, the Park Tool LRT-5 chainring lockring tool is the specific tool for working on the chainring correctly and safely. TECHNICAL SPECIFICATIONS GeneralCode: LRT-5Type: direct-mount chainring lockring toolDrive: 3/8 inch square driveWrench flats: 36 mm MaterialsBody: heat-treated and plated 4140 steel DimensionsCompatible lockring: 41 mm outside diameter, 16 notches CompatibilityFazua Ride 60 e-bike drivetrainsShimano Ultegra BBR60 bottom bracketsShimano Deore XT MT-800 bottom brackets
-35% sale
Park Tool CASSETTE CLEANING BRUSH PARK TOOL... €6,90 €10,50
The Park Tool GSC-4 is a sturdy cassette cleaning brush with an angled, contoured shape designed to reach between sprockets where an ordinary brush cannot. With the Park Tool GSC-4 cassette cleaning brush you remove mud, dust and caked-on lube from cassettes and freewheels, and you can also use it to clean tyre treads. The stiff nylon bristles have just the right firmness to lift the toughest grime without damaging surfaces and components, even when working with degreaser. The angled profile lets you slip the head between sprockets and follow the curve of the teeth, while the strong ergonomic handle gives a firm grip even with wet or greasy hands. It is a simple tool, but it makes the difference between a quick rinse and a truly clean drivetrain that shifts more smoothly and wears less. Used regularly, ideally at every bike wash, it stops dirt building up between sprockets and turning lube into an abrasive paste that speeds up chain and chainring wear. How to clean a cassette with the Park Tool GSC-4 brush Apply degreaser to the cassette and let it work for a few minutes. Insert the angled head between the sprockets and brush along the teeth. Backpedal the wheel to work around the whole circumference. Rinse, dry and lube the chain once the drivetrain is clean. Why choose the Park Tool GSC-4 Angled, contoured shape that reaches between sprockets. Stiff nylon bristles for the toughest dirt. Strong, ergonomic handle that is comfortable to hold. Versatile: cassettes, freewheels and tyres. Kept next to the bucket and degreaser, the Park Tool GSC-4 cassette cleaning brush makes drivetrain cleaning quicker and more effective every wash. TECHNICAL SPECIFICATIONS GeneralCode: GSC-4Type: brush for cleaning cassettes, freewheels and tyresShape: angled and contoured, with ergonomic handle MaterialsBristles: stiff nylon
-31% sale
Park Tool PARK TOOL PRE-GLUED SUPER PATCH K... €3,90 €5,60
The Park Tool GP-2C is the pre-glued Super Patch kit for fixing a punctured inner tube in minutes, with no glue and no waiting. This Park Tool GP-2C Super Patch kit comes in a box weighing just a few grams that fits in any jersey pocket or saddle bag. The self-adhesive patches were engineered in collaboration with 3M and flex with the tube, so they follow its movement during inflation and riding without peeling off. The kit contains six 24 x 24 mm square patches and a small square of sandpaper to prepare the tube surface. They work on both butyl and TPU tubes, the latter increasingly popular on road and gravel bikes for their low weight. How to use the Park Tool GP-2C Super Patch kit Locate the hole and lightly roughen the area with the included sandpaper. Clean the surface of dust and rubber residue. Apply the patch directly over the hole and press firmly. Refit the tube, inflate the tire and ride on. Why choose Park Tool GP-2C Quick, glue-free repair: ideal at the roadside or on the trail. Patches engineered with 3M that flex with the tube. Compatible with butyl and TPU tubes. 32 x 32 x 8 mm, 5 g box, barely noticeable in a pocket. Park Tool considers the Super Patch a temporary fix: the damaged tube should be replaced as soon as possible. Not suitable for tubeless tires or latex tubes. To get home worry-free, the Park Tool GP-2C Super Patch kit is the lightest emergency spare to always carry with you. TECHNICAL SPECIFICATIONS GeneralItem code: GP-2CType: pre-glued inner tube patch kitUse: temporary repair DimensionsPatches: 24 x 24 mmBox: 32 x 32 x 8 mmBox weight: 5 g CompatibilityButyl inner tubesTPU inner tubesNot compatible with tubeless tires and latex tubes Package contents6 self-adhesive patches1 square of sandpaperTake-along box
Park Tool PARK TOOL CASSETTE LOCKRING TOOL ... €71,80
The Park Tool FR-5.2H is a cassette lockring tool with built-in handle designed for the professional workshop: it installs and removes cassette and Center Lock disc brake lockrings without hunting for a separate wrench. This Park Tool FR-5.2H cassette lockring tool with handle combines fitting and lever in one sturdy piece. The 12-spline fitting, with an outer diameter of about 23.4 mm, matches the most common lockrings, while the large 20 mm pass-through hole lets you work without removing most quick-release skewers: remove the nut, slide the tool on and hold it in place with the same nut. The long, rigid handle gives generous, controlled leverage for both loosening and tightening. Park Tool FR-5.2H cassette tool compatibility 7 to 12-speed cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others. Disc brake lockrings and adapters with 12 internal splines, from Shimano and other brands. Top caps on some RockShox forks, including Pike, Lyrik, SID, Revelation, Reba and Paragon. Why choose Park Tool FR-5.2H Built-in handle: no extra wrench or socket needed. 20 mm pass-through hole for working with the quick-release skewer in place. One tool for cassettes, Center Lock rotors and some RockShox forks. Sturdy construction designed for daily workshop use. For cassette removal, pair it with a chain whip to hold the cogs. For anyone who often swaps cassettes or rotors or services suspension, the Park Tool FR-5.2H cassette lockring tool with handle simplifies the job and reduces the number of tools on the bench. TECHNICAL SPECIFICATIONS GeneralItem code: FR-5.2HType: cassette lockring tool with handle DimensionsSplines: 12Fitting outer diameter: approx. 23.4 mmCenter bore: 20 mm Compatibility7-12 speed cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and othersDisc brake lockrings with 12 internal splinesRockShox Pike, Lyrik, SID, Revelation, Reba, Paragon top caps (some models)
-37% sale
Park Tool PARK TOOL FREEWHEEL REMOVER FR-4 €6,90 €10,80
Many European freewheels of past decades, from Regina to Atom, use a 20-spline fitting that no modern cassette tool can grip. The Park Tool FR-4 was made for exactly this: it is the Park Tool FR-4 freewheel remover for 20-spline fittings, essential for anyone working on vintage road bikes, city bikes and classic hubs. The body is heat-treated alloy tool steel and the fitting, with an outer diameter of about 21.6 mm, engages all 20 splines, spreading the torque evenly and avoiding rounding off profiles that are often already worn. The 1 inch hex base lets you work with an adjustable wrench, socket or bench vise, choosing the option with the most leverage depending on how stubborn the freewheel is. Park Tool FR-4 freewheel remover compatibility Atom and Regina freewheels with 20-spline fitting. Splined Zeus freewheels. Some Schwinn-approved freewheels. Older SunTour freewheels with 20-spline fitting. Why choose Park Tool FR-4 Covers the main European 20-spline standards with one tool. Heat-treated alloy tool steel built to free very tight freewheels. Full-spline engagement to protect the freewheel fitting. 1 inch hex for wrench, socket or vise. Before starting, secure the tool with the quick-release or axle nut so it cannot pop out of the fitting under load. For restoring and servicing freewheel drivetrains, the Park Tool FR-4 freewheel remover is a reliable reference in any workshop. TECHNICAL SPECIFICATIONS GeneralItem code: FR-4Type: 20-spline freewheel removerDrive: 1 inch hex MaterialsHeat-treated alloy tool steel DimensionsSplines: 20Fitting outer diameter: approx. 21.6 mm CompatibilityAtom, Regina, splined ZeusSome Schwinn-approved freewheelsOlder SunTour 20-spline freewheels
-42% sale
Park Tool PARK TOOL FREEWHEEL REMOVER SUNTO... €7,90 €13,40
The Park Tool FR-2 is the dedicated remover for older SunTour freewheels with a two-notch tool fitting. Anyone restoring vintage bikes or working on classic hubs knows how hard it is to find the right tool: this Park Tool FR-2 freewheel remover lets you take off a threaded freewheel without damaging the notches or the hub threads. It is made from heat-treated alloy tool steel, so it withstands the high torque needed to free freewheels that have been fitted for years. The two lugs engage the freewheel notches, with an outer diameter of about 25 mm, while the 10 mm center bore clears the axle. The 1 inch hex base can be turned with an adjustable wrench, socket or bench vise. How to use the Park Tool FR-2 freewheel remover Remove the quick release or axle nuts on the drive side. Fit the FR-2 so the two lugs line up with the freewheel notches. Secure the tool with the quick-release nut to stop it slipping out of the notches. Turn counterclockwise with a 1 inch wrench, or clamp the hex in a vise and turn the wheel. Why choose Park Tool FR-2 Dedicated tool for SunTour two-notch freewheels, hard to remove with anything else. Heat-treated alloy tool steel that handles high torque. 10 mm center bore for working with the axle in place. 1 inch hex compatible with wrench, socket or vise. SunTour four-notch freewheels require the FR-3 instead. For restorations and servicing on classic drivetrains, the Park Tool FR-2 freewheel remover is the tool that makes the job clean and safe. TECHNICAL SPECIFICATIONS GeneralItem code: FR-2Type: two-notch freewheel removerDrive: 1 inch hex MaterialsHeat-treated alloy tool steel DimensionsFitting outer diameter: approx. 25 mmCenter bore: 10 mm CompatibilityOlder SunTour two-notch freewheelsNot compatible with SunTour four-notch freewheels (use FR-3)
Park Tool PARK TOOL SUSPENSION FORK CAP TOO... €17,49
The Park Tool FCT-1 is a compact tool for suspension fork top caps, designed to remove them easily and without marks. With the Park Tool FCT-1 fork cap tool even overtightened caps come loose, caps that would risk damage if tackled by hand or with improvised tools. The body has six sides, each shaped to match one of the most popular cap designs: just pick the right face for a precise, stable fit that spreads the force across the whole cap. This avoids burrs on anodized aluminum and damage to hex or splined seats, typical of adjustable pliers. It belongs in the drawer of anyone who services suspension, as well as in the toolbox of riders who adjust air pressure and internals on their own fork. Park Tool FCT-1 fork cap tool compatibility Top caps on select FOX models. Top caps on select RockShox models. Top caps on select DVO and Marzocchi models. Top caps on select Öhlins models. Why choose Park Tool FCT-1 Six different profiles in one tool, no adapters to hunt for. Secure grip that protects the cap finish during removal. Ideal for freeing caps left overtightened after assembly. Small size, easy to keep close at hand. Note: do not use the FCT-1 to overtighten fork caps; always follow the fork manufacturer's installation recommendations. For safe access to air springs and cartridges, the Park Tool FCT-1 suspension fork cap tool is a simple, effective ally. TECHNICAL SPECIFICATIONS GeneralItem code: FCT-1Type: suspension fork top cap toolProfiles: 6 sides, each for a different cap design CompatibilitySelect FOX, RockShox, DVO, Marzocchi and Öhlins top caps
Park Tool PARK TOOL END CAP CRIMPING PLIERS... €38,30
The Park Tool EP-1 is a crimping plier designed to secure end caps on brake, derailleur and dropper post cables. With the Park Tool EP-1 end cap crimping pliers the cap stays firmly on the cable, which won't fray or snag your hands during adjustments. The body is forged and machined steel, while the vinyl-dipped handles give a comfortable, non-slip grip. The short, tapered jaws slip easily into tight spaces around derailleurs, brake calipers and dropper levers, where ordinary pliers can't reach. Two crimping positions let you choose the best clamping point for the job. A properly crimped cap stops the inner wire strands from splaying, a problem that makes it hard to pull and rethread the cable during later adjustments or housing replacement. How to use the Park Tool EP-1 end cap crimping pliers Cut the cable to the correct length once adjustment is complete. Slide the end cap fully onto the end of the cable. Place the cap between the jaws in the most suitable crimping position. Squeeze the handles firmly and check that the cap cannot pull off. Why choose Park Tool EP-1 Dedicated end cap tool, more precise than generic pliers or cutters. Short, tapered jaws for work in hard-to-reach spots. Two crimping positions on the same plier. Forged, machined steel with vinyl-dipped handles. Clean finishes and protected cables on every drivetrain and brake job: the Park Tool EP-1 end cap crimping pliers are the natural partner to cable cutters in any well-equipped workshop. TECHNICAL SPECIFICATIONS GeneralItem code: EP-1Type: end cap crimping pliersCrimping positions: 2 MaterialsBody: forged, machined steelHandles: vinyl-dipped CompatibilityBrake cable end capsShift and derailleur cable end capsDropper post cable end caps
-36% sale
Park Tool PARK TOOL OUTDOOR BIKE REPAIR STA... €507,90 €789,21
The Park Tool THS-1.2 is an outdoor bike repair station designed for permanent installation wherever riders pass: trailheads, parks, university campuses, apartment buildings, schools or a bike shop entrance. The Park Tool THS-1.2 outdoor bike repair station gives anyone a stand to lift the bike and the essential tools for minor adjustments and repairs, around the clock. The entire structure is steel, plated and then powder coated to withstand the weather. The cradle stand holds both wheels off the ground, so riders can spin the pedals, adjust gears or fix a flat with the bike held steady. Six weatherproofed tools are tethered to the station with vinyl-coated 1/8-inch galvanised steel cable, and the assembly fasteners are tamper-proof to discourage theft and vandalism. Riders who stop at the station find what they need to get back on the road after a minor mishap, without carrying a full tool kit. Tools included with the Park Tool THS-1.2 repair station AWS-11: folding hex wrench set. SD-2 and SD-6: #2 Phillips and 6 mm flat blade screwdrivers. PW-5: pedal wrench. TL-5: tyre lever set. TWS-2: folding Torx-compatible wrench set. Why choose the Park Tool THS-1.2 A real service for the cycling community in public and private spaces. Treated steel construction built to stay outdoors all year round. Cable-tethered tools and tamper-proof fasteners to reduce theft and damage. Mounts to an existing post, a permanent structure or the dedicated THP-1 post, sold separately. For municipalities, businesses, hospitality venues and associations that want to offer an always-available service point, the Park Tool THS-1.2 outdoor bike repair station combines toughness and ease of use. TECHNICAL SPECIFICATIONS GeneralCode: THS-1.2Type: outdoor public repair station with cradle standMounting: existing post, permanent structure or THP-1 post (sold separately)Fasteners: tamper-proof MaterialsStructure: plated, powder-coated steelTool cables: vinyl-coated 1/8-inch galvanised steel DimensionsTool box: 31 x 22 x 6.6 cmTube extension from mounting surface: 43 cm Package contentsStation with cradle standAWS-11 folding hex wrench setSD-2 #2 Phillips screwdriverSD-6 6 mm flat blade screwdriverPW-5 pedal wrenchTL-5 tyre lever setTWS-2 folding Torx-compatible wrench set
-36% sale
Park Tool SPOKE TENSION METER PARK TOOL TM-1 €98,90 €154,00
The Park Tool TM-1 is the spoke tension meter for anyone who builds and trues wheels: a properly tensioned wheel is stronger and stays true longer. The Park Tool TM-1 spoke tension meter is the key tool for reaching that tension and belongs in the workshop of anyone who builds wheels, troubleshoots wheel problems or assembles new bikes. TM-1 readings let you estimate the relative tension of the spokes in a wheel and so find the ones that are tighter or looser than the rest. With the included printed conversion table, or with the Park Tool Wheel Tension App, every reading converts to kilogram-force (kgf), so you can calculate the overall tension of the wheel and check that it is at the right level. The app also offers interactive tools to visualise and analyse the data collected with the TM-1. What the Park Tool TM-1 spoke tension meter is for Building and truing wheels. Troubleshooting wheel problems. Assembling new bikes. Finding relatively tight or loose spokes. Calculating the overall wheel tension in kgf. Why choose the Park Tool TM-1 Accurate kgf readings for nearly any bicycle spoke, regardless of material, diameter or shape. Measures round and bladed steel, aluminium and titanium spokes, plus Spinergy PBO and Mavic R2R carbon fibre spokes. Spoke gauge included to identify six common round spoke diameters. Made in the USA, fully rebuildable and recalibratable for a long service life. On the wheelbuilder's bench or in any workshop that wants an objective reference, the Park Tool TM-1 spoke tension meter turns spoke tension into reliable numbers. TECHNICAL SPECIFICATIONS GeneralCode: TM-1Type: spoke tension meter with readings convertible to kgfProduction: USA, rebuildable and recalibratable CompatibilityRound and bladed steel spokesRound and bladed aluminium and titanium spokes (conversion data for select sizes only)Spinergy PBOMavic R2R carbon fibre ContentsTM-1 tension meterGauge for six round spoke diameters (bladed spokes may require other measuring tools)Printed conversion table
-38% sale
Park Tool TUBELESS SEALANT INJECTOR PARK TO... €21,90 €34,90
The Park Tool TSI-1 is the tubeless sealant injector that lets you top up or replace sealant through the valve, with the tyre mounted and the bead firmly seated on the rim. With the Park Tool TSI-1 tubeless sealant injector, routine tyre maintenance becomes quick, tidy and waste-free. The 100 cc body is marked in both cubic centimetres and fluid ounces, so you can measure exactly the amount recommended by the tyre or sealant maker. The thin tube, 120 mm long and 3.5 mm in diameter, passes through any Schrader valve and many Presta valves with removable cores. The same syringe also draws out old sealant before topping up, so you can check how much is left inside. Working through the valve keeps rim, hands and bench clean and makes it easy to keep an eye on sealant with regular checks throughout the season. How to use the Park Tool TSI-1 tubeless injector Deflate the tyre and unscrew the valve core. Turn the wheel with the valve at the bottom to measure the remaining sealant, then draw it out if it needs replacing. Load the correct dose using the scale and inject it through the valve stem. Refit the core, inflate and spin the wheel to spread the sealant. Why choose the Park Tool TSI-1 No need to unseat the bead: work with the tyre mounted. Tested by Park Tool with many sealants, including Orange Seal, Stan's NoTubes, Slime, Muc-Off and Continental. Dual cc and ounce scale for precise, repeatable dosing. Also useful for checking how much sealant is left in the tyre. Some valve stems have an opening narrower than the tube: in that case removing sealant requires unseating the bead. For everything else, the Park Tool TSI-1 tubeless sealant injector is the cleanest way to keep a tubeless setup working. TECHNICAL SPECIFICATIONS GeneralCode: TSI-1Type: injector for adding and removing tubeless sealantCapacity: 100 cc (3.5 fl oz)Scale: marked in cc and fluid ounces DimensionsTube length: 120 mmTube diameter: 3.5 mm CompatibilityAll Schrader valvesMany Presta valves with removable coresSealants tested by Park Tool, including Orange Seal Endurance, Regular and Subzero, Stan's NoTubes original formula, Slime, Muc-Off No Puncture Hassle, Continental RevoSealant (non-exhaustive list)
-37% sale
Park Tool Sprocket Remover/Chain Whip €43,90 €68,70
Sprocket Remover/Chain Whip PARK TOOLThe PARK TOOL Sprocket Remover/Chain Whip is the professional tool designed for those who want to disassemble cassettes and freewheels quickly, precisely, and safely. The shape of the head is engineered to perfectly hook the cassette, preventing slippage even when applying a lot of force, while the generous length offers exceptional leverage to work effortlessly. It is the ideal tool both for the workshop and for the passionate mechanic who demands absolute quality and reliability.Sprocket Remover/Chain Whip PARK TOOL main features:Compatible with 5 to 12-speed cassettes and freewheels for road and mountain bikesHardened bolts that ensure secure fastening and facilitate chain replacementHeavy duty head made of heat treated steel for long durabilityRound vinyl coated handle for comfortable and non-slip gripApproximately 15" (38 cm) length for optimal leverage during disassembly
-36% sale
Park Tool PARK TOOL PROFESSIONAL PEDAL WREN... €37,90 €59,20
The Park Tool PW-4 is the professional pedal wrench designed for heavy daily use in bike shops and race pits. With the Park Tool PW-4 professional pedal wrench even pedals seized by years of rain and mud break loose with a controlled movement, without slipping off the axle flats. The head is oversized and asymmetrical, with two 15 mm openings set at 30 degrees and 45 degrees: this way you always find the angle that gives the best mechanical advantage, whatever the crank position. The extra-long chromoly steel handle brings the overall length to 395 mm, and the 617 g weight adds stability to the grip and transfers force cleanly. How to work with the Park Tool PW-4 pedal wrench Remember the direction: the right pedal loosens anticlockwise, the left has a reverse thread and loosens clockwise. Turn the crank until you find the opening, at 30 or 45 degrees, that leaves the most room for leverage. To break a pedal loose, set wrench and crank in a scissor position and push progressively rather than jerking. When installing, grease the thread and tighten fully using the same leverage. Why choose Park Tool PW-4 Two angled openings that eliminate dead crank positions. Chromoly handle built to withstand repeated loads without bending. 395 mm length that reduces effort on the most stubborn pedals. Professional shop tool, built for years of daily service. In a workshop where pedals are swapped every day, the Park Tool PW-4 professional pedal wrench is the one you reach for without thinking. TECHNICAL SPECIFICATIONS GeneralCode: PW-4Type: professional pedal wrenchOpenings: two 15 mm, at 30° and 45° MaterialsHandle: chromoly steel DimensionsOverall length: 395 mmWeight: 617 g CompatibilityPedals: with 15 mm wrench flats
-36% sale
Park Tool PARK TOOL WALL MOUNT REPAIR STAND... €296,90 €461,30
The Park Tool PRS-4W-2 is a wall mount repair stand with 100-3D clamp that turns a stud or post into a workshop-grade work station. With the Park Tool PRS-4W-2 wall mount repair stand the bike hangs clear of the wall, free to be turned and adjusted without taking up floor space. The bracket is made from heavy-gauge powder-coated steel and places the centre of the jaws 36 cm from the mounting surface, enough room to work all around the frame. The 100-3D Micro-Adjust clamp rotates 360 degrees, uses cam-actuated adjustment and has narrow 70 mm jaws that grip round and aero tubes from 23 to 76 mm, dropper posts included. Securely fastened with appropriate hardware to a solid stud, post or beam, it supports up to 45 kg: enough for e-bikes, cargo bikes and tandems. Installing the Park Tool PRS-4W-2 wall mount repair stand The wall plate measures approximately 15 x 6 cm with holes of about 11.1 mm on 100.2 mm centres. Mounting hardware is not included: choose it for the support, which must be a stud, post or beam able to carry the load. Allow space for the bike to rotate around the 36 cm reach of the arm. The installer remains responsible for the strength of the mounting surface and fasteners. Why choose Park Tool PRS-4W-2 100-3D clamp with micro-adjustable clamping force, gentle on carbon tubes. Up to 45 kg capacity when correctly installed, suitable for the heaviest bikes. No floor base: ideal for tight workshops or garages where every metre counts. Replaceable jaw covers (part 1960) for a long clamp life. For anyone who wants a fixed, professional work station without giving up floor space, the Park Tool PRS-4W-2 wall mount repair stand with 100-3D clamp is the most rational choice. TECHNICAL SPECIFICATIONS GeneralCode: PRS-4W-2Type: wall mount repair stand with 100-3D Micro-Adjust clampMaximum load: 45 kg when securely mounted to a solid stud, post or beamClamp rotation: 360° MaterialsBracket: heavy-gauge powder-coated steelJaw covers: replaceable, part 1960 DimensionsWall plate: approx. 15 x 6 cmMounting holes: approx. 11.1 mm, 100.2 mm centresWall to jaw centre: 36 cmJaw height: 70 mm CompatibilityClamp capacity: round and aero tubes from 23 to 76 mm, dropper posts includedBikes: e-bikes, cargo bikes and tandems too Package contentsWall arm with 100-3D clampMounting hardware not included
-34% sale
Park Tool PARK TOOL SPOKE WRENCH SW-0 FOR 3... €6,90 €10,40
The Park Tool SW-0 is the spoke wrench for nipples with 3.23 mm wrench flats, the size most often found on high-end wheels. With the Park Tool SW-0 spoke wrench for 3.23 mm nipples you can work on quality wheel builds with the accuracy needed to avoid marking or rounding the nipple, even at high tension. This size fits nipples from several manufacturers, including DT Swiss, Sapim, Wheelsmith and Pillar. The wrench is made in the USA, heat treated and nickel plated, and keeps the classic design mechanics have relied on for more than half a century. The vinyl dip marks the size with a dedicated colour, so the SW-0 stands out immediately from the other spoke wrenches in the range. Before buying it is still worth measuring the nipple flats to be sure of the fit. Ideal jobs for the Park Tool SW-0 spoke wrench Fine truing of road, gravel and MTB wheels with brass or alloy 3.23 mm nipples. Building new wheels, from first tensioning to final finishing in the truing stand. Maintenance on high-end wheels after the first rides, when the spokes settle in. Quick correction of a wobble while travelling or at an event. Why choose Park Tool SW-0 Sized for the nipples most common on high-end wheels. Precise grip that protects expensive and delicate nipples. Heat-treated, nickel-plated steel for daily workshop use. Coating colour that prevents mix-ups with neighbouring sizes. If you build or look after quality wheels, the Park Tool SW-0 spoke wrench for 3.23 mm nipples is the size your bench should never be without. TECHNICAL SPECIFICATIONS GeneralCode: SW-0Type: spoke wrenchMade in: USA MaterialsFinish: heat treated and nickel platedCoating: coloured vinyl to identify the size CompatibilityNipples: 3.23 mm (0.127 in) wrench flatsBrands: including DT Swiss, Sapim, Wheelsmith, Pillar
-38% sale
Park Tool PARK TOOL MASTER LINK PLIERS MLP-1.2 €13,90 €22,40
The Park Tool MLP-1.2 are master link pliers designed to open and close, in seconds, the connecting links now found on almost every derailleur drivetrain. With the Park Tool MLP-1.2 master link pliers you can remove the chain to clean it, replace it or take it off the frame without driving out a pin with a chain tool. The master link, also called a quick link or power link, is meant to be handled by hand, but after a few months of mud, dust and lube it is often impossible to release with your fingers. The MLP-1.2 jaws are shaped to sit in the rollers next to the link: squeeze the handles and the link opens, pull them apart and it closes and seats without stressing the plates. When to use the Park Tool MLP-1.2 master link pliers Deep cleaning the chain in a parts washer or with degreaser, off the bike. Checking chain wear and replacing a worn chain. Stripping the drivetrain or frame, for example before painting or shipping. Closing a new link without loading it by turning the pedals. Why choose the Park Tool MLP-1.2 Compatible with 5 to 13-speed chains that use a master link. Works with SRAM eTap AXS, Shimano XTR 12-speed and Campagnolo Ekar 13-speed chains. One tool for both opening and closing the link. Lower risk of bending plates than improvised solutions with generic pliers. Not suitable for old-style links with both pins on one plate and a spring clip, typical of older drivetrains and single speeds: those need needle nose pliers. For every modern chain, the Park Tool MLP-1.2 master link pliers are the fastest and cleanest tool. TECHNICAL SPECIFICATIONS GeneralCode: MLP-1.2Type: pliers for opening and closing master links Compatibility5 to 13-speed derailleur chains with a master linkIncluding SRAM eTap AXS, Shimano XTR 12-speed, Campagnolo Ekar 13-speedNot compatible with spring-clip or side-plate master links (older drivetrains and single speed)
-38% sale
Park Tool DT-2.2 Rotor Truing Fork €18,90 €30,20
DT-2.2 Rotor Truing ForkThe PARK TOOL DT-2.2 Rotor Truing Fork is the essential tool to realign brake discs that can become deformed over time due to wear, heat or impacts. Even a new disc may not be perfectly straight, causing annoying rubbing on the pads and less smooth braking. With the DT-2.2 you can intervene precisely and in a controlled way, avoiding makeshift solutions that risk damaging the rotor. Thanks to its grooves designed to fit different disc profiles and thicknesses, it allows you to straighten the rotor with small progressive movements, restoring quiet and powerful braking. The high-quality steel construction and vinyl-coated handle ensure comfort and control even during the most delicate operations, both in the workshop and at your home maintenance corner.DT-2.2 Rotor Truing Fork main features:Specifically designed to straighten bent bike brake discsCompatible with rotors up to 2.5 mm thickOne long slot and two short ones for maximum compatibility with any disc designHigh quality steel construction for durability and precision over timeVinyl coated handle for a comfortable and secure gripAllows progressive and controlled adjustments to reduce rubbing and noise during brakingIdeal for both professional workshops and cyclists who maintain their bikes independently
-38% sale
Park Tool Chain Checker Tool €14,90 €23,90
PARK TOOL Chain Checker ToolThe chain is the heart of your bike's drivetrain: if it is worn, it causes imprecise shifting, annoying noises, and, in the worst cases, costly damage to the cassette and chainring. The PARK TOOL Chain Checker Tool CC-4.2 is the simple and precise tool designed to prevent all this. Just place it on the chain: the gauge drops into the links and, thanks to its three-point contact design, shows you the real wear level in seconds, with no interpretation or doubt. Whether you ride a road bike, a mountain bike, or a single-speed urban bike, this gauge helps you know exactly when it is time to replace the chain, following the thresholds recommended by manufacturers, so you protect the drivetrain and keep your bike always smooth and reliable.PARK TOOL Chain Checker Tool main features:Accurately measures chain wear, helping to prevent costly drivetrain damageLaser-cut design with three points of contact on the chain for quick and accurate readingCompatible with 5 to 13-speed chains and single-speed chainsIndicates chain wear at 0.5%, 0.75%, and 1.0%, in line with manufacturer recommendations for replacement“Drop-in” tool: it rests directly on the chain, easy to use even in a home workshop