Park Tool
PARK TOOL CASSETTE LOCKRING TOOL ...
€7,90
€13,30
The Park Tool FR-5.2 is the cassette lockring tool that sees more bench time than almost anything else in a workshop: it fits the 12-spline profile found on the vast majority of 7 to 12-speed cassette lockrings. With the Park Tool FR-5.2 cassette lockring tool, swapping sprockets, changing gearing or deep-cleaning the drivetrain becomes a job of just a few minutes.
The body is made from heat-treated alloy tool steel, so the splines stay crisp even after thousands of tightening cycles. The thin-wall design lets you work without removing cones and locknuts on traditional hubs, while the 12 mm centre bore clears the axle. The 1-inch hex base accepts an open-end wrench or a socket, so all the torque goes into the lockring without slipping and damaging splines or knuckles.
How to use the Park Tool FR-5.2 cassette lockring tool
Remove the wheel and take out the quick release or axle to free the lockring.
Seat the FR-5.2 fully into the splines, square to the hub.
Hold the sprockets with a chain whip and turn anticlockwise with a 1-inch wrench.
When refitting, lightly grease the thread and tighten to the cassette maker's torque spec.
Why choose the Park Tool FR-5.2
One tool for Shimano, SRAM (including 1x), SunRace, SunTour, Chris King cassettes and many more.
Also works on disc brake lockrings and adapters with 12 internal splines.
Compatible with the top caps of several RockShox forks, handy during suspension service.
Heat-treated steel built for daily use at the workbench.
From the pro workshop to the home garage, the Park Tool FR-5.2 cassette lockring tool is one of those essential tools that pays off every time you change a cassette or a brake rotor.
TECHNICAL SPECIFICATIONS
GeneralCode: FR-5.2Type: cassette lockring toolDrive: 1-inch hex base for wrench or socket
MaterialsBody: heat-treated alloy tool steel
DimensionsProfile: 12 splines, approx. 23.4 mm outer diameterCentre bore: 12 mm
Compatibility7 to 12-speed cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and othersDisc brake lockrings and adapters with 12 internal splines from Shimano and other brandsTop caps of some RockShox forks: Pike, Lyrik, SID, Revelation, Reba, Paragon
Park Tool
PARK TOOL BOTTOM BRACKET TOOL 12-...
€30,99
The Park Tool BBT-79.3 bottom bracket tool installs and removes threaded cups with 12-notch tool fittings, the interface used by SRAM BSA DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma and many other bottom brackets. It is CNC-machined from aluminium, made in-house by Park Tool and anodized so you can spot it instantly among the other tools on the bench.
The 3/8" square drive accepts ratchets and torque wrenches, so final tightening is done to the manufacturer's torque and not by feel. Integrated threads make it compatible with the Park Tool BBT-RS retaining system (sold separately), which uses an adjustable spring to hold the tool against the cup and stop it jumping out of the notches just when the cup is at its tightest.
Park Tool BBT-79.3 bottom bracket tool compatibility
12-notch cups with a 45-47 mm major diameter and 44 mm minor diameter.Examples: SRAM BSA DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma, Hawk Racing BB3086.Brands: C-Bear, Cane Creek, CeramicSpeed, Easton, Enduro, Hawk Racing, Kogel, Race Face, Rotor, SRAM, Token, White Industries, Zipp.Threaded and thread-together standards: BSA, ITA, T47 and several threaded BB30/PF30, both DUB and 30 mm.Not designed for impact drivers or other power tools.
Why choose Park Tool BBT-79.3
CNC-machined aluminium: tight tolerances on all 12 notches for play-free engagement.3/8" drive for tightening with a torque wrench.Ready for the BBT-RS system, useful on seized cups or in a busy workshop.Coloured anodizing to tell it apart from other bottom bracket tools.
If you work on SRAM DUB, Race Face or Rotor cranksets, the Park Tool BBT-79.3 bottom bracket tool is the precision tool to keep on your bench.
TECHNICAL SPECIFICATIONS
GeneralCode: BBT-79.3Brand: Park ToolType: 12-notch bottom bracket toolDrive: 3/8" square for ratchet and torque wrenchCompatible accessory: BBT-RS retaining system (sold separately)
MaterialsBody: CNC-machined aluminium, anodized
DimensionsNumber of notches: 12Notch major diameter: 45-47 mmNotch minor diameter: 44 mm
CompatibilityExamples: SRAM BSA DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma, Hawk Racing BB3086Brands: C-Bear, Cane Creek, CeramicSpeed, Easton, Enduro, Hawk Racing, Kogel, Race Face, Rotor, SRAM, Token, White Industries, ZippWarning: do not use with impact drivers or power tools