STEERER SAW GUIDE FOR CARBON BLADE PARK TOOL SG-8

The Park Tool SG-8 is the steerer saw guide designed for carbon-specific hacksaw blades, which are wider than traditional ones. Clamped onto the tube, it guides the blade through the whole cut and delivers a straight, clean fork steerer cut, as well as on handlebars, seatposts and other round tubes.

The slot accepts blades up to 2.5 mm (3/32") wide, which is what you need to work with carbon blades such as the Park Tool CSB-1. The body is made of non-scratching composite that will not mark the tube surface, with steel threads and a steel reinforcing plate for heavy shop use. The working range is 22 to 33 mm in diameter and includes 1", 1 1/8" and 1 1/4" fork steerers. Clamp the guide onto the tube and cut, letting the SG-8 keep the blade in line through the whole stroke.

Where to use the Park Tool SG-8 saw guide for carbon blades

• Shortening carbon fork steerers with a composite-specific blade.
• Cutting round handlebars from 22 to 33 mm.
• Shortening round seatposts.
• Any other round tube within the guide's diameter range.

Why choose the Park Tool SG-8

• Slot sized for carbon blades up to 2.5 mm wide.
• Compatible with 1", 1 1/8" and 1 1/4" fork steerers.
• Non-scratching composite body that respects the tube finish.
• Steel threads and reinforcing plate for professional use.
• Pairs with the Park Tool CSB-1 blade and the Park Tool SAW-1 hacksaw.

For traditional steel hacksaw blades, Park Tool recommends the SG-6 guide instead. For anyone regularly working on carbon forks, handlebars and seatposts, the Park Tool SG-8 saw guide for carbon blades is the natural companion to the dedicated blade.