Burgtec
PAIR OF BURGTEC MK4 PENTHOUSE STE...
€25,82
€28,69
PAIR OF PINS in STEEL BURGTEC MK4 PENTHOUSE
Replacement pins in tempered En24T steel for Burgtec Penthouse Flat MK4 pedals. Diameter 12 mm. Installed with 8 mm hex key.
ITEM CODE
1473
Crank Brothers
CRANK BROTHERS Titanium Spindle U...
€153,00
€180,00
CRANK BROTHERS Titanium Spindle Upgrade Kit
The kit includes a pair of titanium spindles with Refresh kit which includes Enduro sealed bearings, sealed needle bearings for enduro, double DSS sealing system, aluminum Hex end caps, O-rings, nuts, bushing protectors and a tool for removing the bearings. Compatible with Eggbeater, Candy, Mallet, 5050, Stamp (1, 2, 3) models and dual-clip models from 2010 to today.
CRANK BROTHERS Titanium Spindle Upgrade Kit main features:
Maximum rider weight: 200lb / 90kg
Q-factor: 52mm
Axle material: 6al / 4v titanium
Weight: 60g per pair
Crank Brothers
CRANK BROTHERS DOUBLE SHOT 2/3 PE...
€25,50
€30,00
CRANK BROTHERS DOUBLE SHOT 2/3 PEDAL REBUILD KIT
The kit includes high-quality internal components to give new life to your A4 Selection Doubleshot pedals. With 2 internal spindle seals, 2 external spindle seals, 2 internal solid Igus bearings, 2 external Enduro cartridge bearings, 2 spindle nuts and 2 external bearing holders, you will be able to pedal with greater smoothness and precision. Compatibility is guaranteed with the Doubleshot (2016), Doubleshot 2 (2017+), Doubleshot 3 (2017+) models.
CRANK BROTHERS DOUBLE SHOT 2/3 PEDAL REBUILD KIT main features:
2 Internal spindle seals for optimal sealing
2 External spindle seals to protect the internal components
2 Internal solid Igus bearings for smooth and quiet pedaling
2 External Enduro cartridge bearings for greater strength and long-lasting durability
2 Spindle nuts for secure and stable assembly
2 External bearing holders for correct bearing positioning
Compatibility with Doubleshot (2016), Doubleshot 2 (2017+), Doubleshot 3 (2017+)
Ht
HT 40 SILVER-PLATED STEEL PIN KIT...
€15,22
€17,90
HT KIT 40 SILVER-PLATED STEEL PINS AE03 136AE03 SI-311
Pack of 40 pins
Burgtec
BURGTEC PENTHOUSE MK3 PEDAL REPAI...
€17,89
€20,80
BURGTEC PENTHOUSE MK3 PEDAL REPAIR KIT
Kit for repairing the axle joints of the BURGTEC PENTHOUSE MK3 pedals.
DISCOUNT CODE
1375
Crank Brothers
CRANK BROTHERS EGGBEATER 1 PEDALS
€50,99
€59,99
CRANK BROTHERS EGGBEATER 1 PEDALS
Pedals with 4-sided engagement to clip in the pedals in two different ways, on 4 faces, even in the presence of a lot of mud. Lightweight and robust model that does not require special maintenance.
CRANK BROTHERS EGGBEATER 1 PEDALS MAIN FEATURES:
Lightweight and minimal.
4-sided engagement.
High-quality bearings.
Stamped steel pedals.
Brass cleats.
Spacers included.
Igus LL-glide inner bearing.
Enduro cartridge outer bearing.
Q factor 52mm.
Release angle 15° / 20°.
Forged chromoly steel scm 435 axle.
300 series stainless steel spring.
Weight 290g.
ITEM CODE
14791 (Color: Black/Silver)
Crank Brothers
CRANK BROTHERS CANDY 11 GOLD / GO...
€425,00
€500,00
CRANK BROTHERS CANDY 11 GOLD / GOLD SPRING PEDALS
The CANDY 11 is a cross-country and marathon pedal with a 6061-T6 aluminum body and brass cleats. The engagement and release mechanism is made of 6Al/4V titanium, and the axle is also of the same grade titanium, for a pair weight of only 249 grams. The body uses an aluminum structure: it has a shape that makes cleat engagement easier and grooves that optimize grip when the shoe is not clipped in. The engagement mechanism has 4 sides of entry and ensures optimal mud shedding. The Q factor is 52 millimeters, the release angle is adjustable, with a float between 15 and 20 degrees.
PEDAL CANDY 11 GOLD / GOLD SPRING main features:
COLOR: Gold
MATERIAL: 6061-T6 aluminum
DIMENSIONS (L X W): 67mm x 74mm
WING MATERIAL: 6al / 4v titanium
AXLE LENGTH: 52mm
CLEATS: Premium brass cleats with shims included
ENDCAP: Hex alloy
INNER BEARING: Enduro sealed needle bearing
OUTER BEARING: Enduro cartridge bearing
MAXIMUM RIDER WEIGHT: 200 lbs / 90 kgs
RELEASE ANGLE: 15° / 20°
AXLE MATERIAL: 6al / 4v titanium
SPRING MATERIAL: 300 series stainless steel
TRACTION PADS: 1mm installed - 2mm included
CLEATS INCLUDED: 15° / 20° Standard Release, 6° Float
WEIGHT: 249g per pair
Burgtec
BURGTEC MK5 PEDAL PLUGS
€9,00
€10,00
BURGTEC MK5 PEDAL CAPS
Replacement caps for Burgtec Penthouse MK5 pedals and Penthouse MK4 flat pedals.
ITEM CODE
1676
Ht
SPARE PINS FOR HT X1/X2 PEDALS
€9,78
€11,50
SPARE PINS FOR HT X1/X2 PEDALS
Replacement pins for X1 and X2 pedals.
Pack of 20 pins.
Crank Brothers
CRANK BROTHERS MALLET E11 PEDALS
€297,51
€350,01
CRANK BROTHERS MALLET E11 PEDALS
The CRANK BROTHERS MALLET E11 PEDALS, in premium edition, are perfect for Enduro. The spring wings are made of titanium to make the pedal light and functional.
CRANK BROTHERS MALLET E11 PEDALS MAIN FEATURES:
Titanium spring wings.
Pedal body in 6061-T6 aluminum.
Q factor 52mm.
Double-chamfered edges to reduce rock strikes.
concave platform for a secure and comfortable support.
Six adjustable pins on each side.
Traction Pad technology.
Knurled surface for better traction when unclipped.
4-sided entry.
Premium bearings with double sealing system.
Igus LL-glide internal bearings.
Enduro-type external cartridge bearings.
300 series stainless steel spring.
Release angle 15°/20°.
Weight (manufacturer, pair) 385 g.
Exclusive black / gold anodized treatment.
Forged scm 435 chromoly steel axle.
300 series stainless steel springs.
Premium cleats INCLUDED.
ITEM CODE
CRB-16093
Specialized
SPECIALIZED BOOMSLANG PEDAL BLACK
€61,20
€169,99
SPECIALIZED BOOMSLANG BLACK PEDAL
The BOOMSLANG pedals by Specialized feature an ultra-thin profile (10mm in the center) for the best connection with the rider.
The wide support surface (110x108 mm) allows you to stay on the pedals out of the saddle without too many problems, while the tapered edge and pins provide a grip on the pedal quasi equal to that of a clipless pedal.
The pins are so thin and sharp that you really do not want to slip off the pedal or rest your calf on it in a relaxed position..they scratch like artigli!
In short, you will non find a better alternative to the Boomslang on the market..an altro mondo!
SPECIALIZED BOOMSLANG BLACK PEDAL main features
4 spare pins are inserted in the pedal body.
Tapered ends for maximum grip.
Wide support surface for DH use, 110x108mm.
COD. ART. 09115-2300
Shimano
shimano M8120 DEORE XT PEDALS WIT...
€86,24
€114,99
SHIMANO M8120 DEORE XT PEDALS WITH CLEATS
The SHIMANO M8120 DEORE XT PEDALS WITH CLEATS are perfect for all those who are looking for a versatile model for Enduro or All-Mountain. The upper pedal-shoe contact surface provides a wider platform to always have perfect control of the bike. The integrated cage, in addition to increasing stability while pedaling, improves foot grip on the pedal even when it is open. These pedals work perfectly with Shimano ME and AM shoes.
SHIMANO M8120 DEORE XT PEDALS WITH CLEATS KEY FEATURES:
Wider platform to improve foot-pedal contact, for excellent power transfer and to always have control of the bike.
The cage protects the moving mechanisms and increases stability.
The hollow, oval forma wings do not allow mud to accumulate.
Hollow axle with forte rigidity and light weight.
Chromoly steel axle.
Aluminum platform.
Cleats supplied SM-SH51 and 1 mm spacer.
Spring tension adjustable over a wide range.
Clipless pedals.
Weight (manufacturer): 438 g.
ITEM CODE
EPDM8120
Crank Brothers
CRANK BROTHERS STAMP 11 SMALL PEDALS
€255,00
€300,00
CRANK BROTHERS STAMP 11 SMALL PEDALS
The CRANK BROTHERS STAMP 11 SMALL PEDALS deliver high performance with total power transfer, great lightness and exceptional grip. The pedal surface is thin (11-13 mm) and the strong and lightweight platform is made of forged aluminum. The titanium axle provides high strength and overall lightness.Pedal perfetto for those who practice All-Mountain: 100 x 100 mm platform, ideal for riders who wear sizes 37 - 43.
MAIN FEATURES OF CRANK BROTHERS STAMP 11 SMALL PEDALS:
Forged aluminum platform.
10 grippy pins on each side.
Titanium axle.
Thin surface 11-13 mm.
Premium needle ball bearings.
6061-T6 aluminum body.
Weight: 299 g (pair).
ITEM CODE
16166
Hope
HOPE REPLACEMENT CLEATS
€17,08
€21,90
HOPE REPLACEMENT CLEATS
Cleat no. 5 offers a float angle of 5° and a release angle of 13°. The cleat is quickly attached to the shoes and fits all versions of Hope Union clipless pedals.
MAIN FEATURES OF HOPE REPLACEMENT CLEATS:
Use: All Mountain, Cross Country, Downhill.
Float: 5°.
Release angle: 13°.
2-bolt attachment.
Cleats in metallo.
Compatible with the models: Hope Union GC / Hope Union RC / Hope Union TC.
WOLF TOOTH
PAIR OF WOLF TOOTH BOLTS FOR WAVE...
€2,30
€2,50
PAIR OF WOLF TOOTH WAVEFORM PEDAL AXLE BOLTS
The WAVEFORM PEDAL AXLE BOLTS from Wolftooth are designed to ensure maximum safety and durability during your cycling adventures. With an innovative design and high-quality materials, these bolts are the perfect accessory for your favorite pedals.
WAVEFORM PEDAL AXLE BOLTS main features:
Specifically designed for Wolftooth Waveform pedals
Ensure perfect grip and stability while pedaling
Made with durable materials for long-lasting performance over time
Hope
REPLACEMENT CLEATS FOR HOPE PEDAL...
€19,71
€21,90
REPLACEMENT CLEATS FOR HOPE PEDALS KIT-4
Replacement cleats for Hope Union Clip pedals. The release angle of the plates with 4° float is 12° and the lateral play is 2 mm, so you always have the perfect position on the pedal.
MAIN FEATURES OF REPLACEMENT CLEATS FOR HOPE PEDALS KIT-4:
Cleat material: stainless steel.
Bolt material: steel.
Mounting system: standard 2-bolt MTB.
Compatibility: Hope Union Clip pedals.
Float: 4°.
Release angle: 12°.
Lateral play: 2mm.
deity
DEITY BLADERUNNER PEDALS
€122,38
€143,98
DEITY BLADERUNNER PEDALS
Deity Bladerunner Pedals are an excellent choice for the most demanding bikers. Made of aluminum alloy, they are lightweight, durable and offer a secure grip. Their ergonomic shape and grooved surface ensure a firm grip and smooth pedaling. A perfect choice for your bike rides.
DEITY BLADERUNNER PEDALS KEY FEATURES:
Made of aluminum alloy for lightness and durability
Ergonomic shape for a secure grip
Grooved surface for smooth pedaling and a firm grip
ITEM CODE: DEBLADEBLK (Color: Black)
Ht
HT GD1 PEDALS
€67,92
€79,90
HT GD1 PEDALS
The HT GD1 pedals have on one side the wide platform of the X2 pedal with the HT automatic cleat system in the X1E version (X1 compatible), with pins for better foot support; on the other side they are flat to feel comfortable on technical sections.
HT GD1 PEDALS KEY FEATURES:
Dual function clip/flat.
Pedal weight (pair) 430 g.
Cleat weight (pair) 64 g.
Dimensions 83.5 x 90 x 17 mm.
Body material die-cast aluminum.
Spindle CNC-machined in cr-moly.
Pedal bearings Sealed bearings / DU bushings.
Cleat system X1E / X1 / X1F (exclusive HT system).
Replaceable pins.
FIREEYE
FIREEYE GRILL 2.0 PEDALS NERI
€49,95
€99,89
FIREEYE GRILL 2.0 NERI PEDALS
The second-generation Grill are ultra-durable flat pedals, designed for intensive use in MTB and e-bikes.
KEY FEATURES OF FIREEYE GRILL 2.0 NERI PEDALS:
Material: CNC-machined 6061 aluminum
Axle: cr-mo
Bearing system: sealed bearing and DU bushings
Dimensions: 105mm x 105mm
Concave platform, maximum height 17mm
Interchangeable aluminum pins, 14 per side
Weight: 399g / pair
Specialized
SPECIALIZED EPEDAL PEDALS IN CNC ...
€84,00
€210,00
SPECIALIZED EPEDAL PEDALS IN CNC ALLOY
E-bike pedals with pins inspired by the mondo of downhill, for a secure footing, and a slim profile, with ample clearance, specifically designed for electric bikes. Cartridge bearings ensure efficiency for many kilometers.
SPECIALIZED EPEDAL PEDALS IN CNC ALLOY KEY FEATURES:
Body in 6061 CNC aluminum.
Axle in CNC Cro-Mo.
Bearings: ultra-light self-lubricating sealed bushings.
Replaceable pins.
Misura 102mm x 108mm.
Weight 170 grams (cad).
Dimensions: 11 x 20 x 7 cm.
ITEM CODE
09122-3200
Ht
HT N-EVO+ argento PINS
€11,56
€13,60
HT N-EVO+ ARGENTO PINS
Replacement pins for AE01, ME01, AE03, AE05, ME03, ME05, ME02 pedals. For 0712 DU bushings.
Crank Brothers
CRANK BROTHERS TRACTION BEARINGS ...
€12,74
€14,99
CRANK BROTHERS TRACTION PADS FOR Mallet E / DH
Increase the grip between shoe and pedal thanks to the Traction Pads: made of synthetic material, they include 1 and 2 mm spacers. They are compatible with Mallet E/DH pedals.
CRANK BROTHERS TRACTION PADS FOR Mallet E / DH main features:
Includes: 8 × 1mm traction pads
Includes: 8 × 2mm traction pads
Crank Brothers
CRANK BROTHERS MALLET PEDAL DH11 ...
€297,49
€349,99
CRANK BROTHERS MALLET PEDAL DH11 PEDALS
The CRANK BROTHERS MALLET PEDAL DH11 PEDALS have “titanium wings” and double chamfered edges to reduce impacts with rocks. The platform is concave for a secure footing and the 8 adjustable pins, positioned on each side, offer high grip. Integrated traction technology to optimize the shoe/pedal interface.
CRANK BROTHERS MALLET PEDAL DH11 PEDALS MAIN FEATURES:
Titanium wings to reduce weight.
Double chamfered edges to reduce impacts with rocks.
Exclusive black and gold dual-anodized color scheme.
Concave platform for a secure footing.
8 adjustable pins per side for increased grip.
Integrated traction technology to optimize the shoe/pedal interface.
Ribbed body for better traction when not clipped in.
Q factor of 57 mm for stability at speed.
4-sided entry / superior mud shedding.
Customizable float and release angle.
Premium bearings and double sealing system.
ITEM CODE
16096