Crank Brothers
CRANK BROTHERS EGGBEATER 2 PEDALS
€84,99
€99,99
CRANK BROTHERS EGGBEATER 2 PEDALS
The Eggbeater 2 pedals from Crank Brothers are clipless and super-light, designed for cross country and cyclocross. The pedals offer four-sided entry and excellent mud shedding, properties for which Crank Brothers is very renowned.
KEY FEATURES OF CRANK BROTHERS EGGBEATER 2 PEDALS:
Forged Chromoly axle, Stainless Steel body and steel wings.
Inner bearing with bushings, outer bearing with sealed cartridge bearing.
Release angle of 15° or 20°.
Weight (manufacturer): 272 g per pair.
Crank Brothers
CRANK BROTHERS 8 MM SHORT PIN KIT
€10,19
€11,99
CRANK BROTHERS PIN KIT 8 MM SHORT PIN
Kit of 50 replacement short 8mm pins for Stamp 2,3,7 11 / Mallet 3, E, DH / 5050 / Doubleshot 3 pedals.
ITEM CODE
13891
Crank Brothers
CRANK BROTHERS Titanium Spindle U...
€153,00
€180,00
CRANK BROTHERS Titanium Spindle Upgrade Kit
The kit includes a pair of titanium spindles with Refresh kit which includes Enduro sealed bearings, sealed needle bearings for enduro, double DSS sealing system, aluminum Hex end caps, O-rings, nuts, bushing protectors and a tool for removing the bearings. Compatible with Eggbeater, Candy, Mallet, 5050, Stamp (1, 2, 3) models and dual-clip models from 2010 to today.
CRANK BROTHERS Titanium Spindle Upgrade Kit main features:
Maximum rider weight: 200lb / 90kg
Q-factor: 52mm
Axle material: 6al / 4v titanium
Weight: 60g per pair
Crank Brothers
CRANK BROTHERS DOUBLE SHOT 2/3 PE...
€25,50
€30,00
CRANK BROTHERS DOUBLE SHOT 2/3 PEDAL REBUILD KIT
The kit includes high-quality internal components to give new life to your A4 Selection Doubleshot pedals. With 2 internal spindle seals, 2 external spindle seals, 2 internal solid Igus bearings, 2 external Enduro cartridge bearings, 2 spindle nuts and 2 external bearing holders, you will be able to pedal with greater smoothness and precision. Compatibility is guaranteed with the Doubleshot (2016), Doubleshot 2 (2017+), Doubleshot 3 (2017+) models.
CRANK BROTHERS DOUBLE SHOT 2/3 PEDAL REBUILD KIT main features:
2 Internal spindle seals for optimal sealing
2 External spindle seals to protect the internal components
2 Internal solid Igus bearings for smooth and quiet pedaling
2 External Enduro cartridge bearings for greater strength and long-lasting durability
2 Spindle nuts for secure and stable assembly
2 External bearing holders for correct bearing positioning
Compatibility with Doubleshot (2016), Doubleshot 2 (2017+), Doubleshot 3 (2017+)
Crank Brothers
CRANK BROTHERS EGGBEATER 1 PEDALS
€50,99
€59,99
CRANK BROTHERS EGGBEATER 1 PEDALS
Pedals with 4-sided engagement to clip in the pedals in two different ways, on 4 faces, even in the presence of a lot of mud. Lightweight and robust model that does not require special maintenance.
CRANK BROTHERS EGGBEATER 1 PEDALS MAIN FEATURES:
Lightweight and minimal.
4-sided engagement.
High-quality bearings.
Stamped steel pedals.
Brass cleats.
Spacers included.
Igus LL-glide inner bearing.
Enduro cartridge outer bearing.
Q factor 52mm.
Release angle 15° / 20°.
Forged chromoly steel scm 435 axle.
300 series stainless steel spring.
Weight 290g.
ITEM CODE
14791 (Color: Black/Silver)
Crank Brothers
CRANK BROTHERS CANDY 11 GOLD / GO...
€425,00
€500,00
CRANK BROTHERS CANDY 11 GOLD / GOLD SPRING PEDALS
The CANDY 11 is a cross-country and marathon pedal with a 6061-T6 aluminum body and brass cleats. The engagement and release mechanism is made of 6Al/4V titanium, and the axle is also of the same grade titanium, for a pair weight of only 249 grams. The body uses an aluminum structure: it has a shape that makes cleat engagement easier and grooves that optimize grip when the shoe is not clipped in. The engagement mechanism has 4 sides of entry and ensures optimal mud shedding. The Q factor is 52 millimeters, the release angle is adjustable, with a float between 15 and 20 degrees.
PEDAL CANDY 11 GOLD / GOLD SPRING main features:
COLOR: Gold
MATERIAL: 6061-T6 aluminum
DIMENSIONS (L X W): 67mm x 74mm
WING MATERIAL: 6al / 4v titanium
AXLE LENGTH: 52mm
CLEATS: Premium brass cleats with shims included
ENDCAP: Hex alloy
INNER BEARING: Enduro sealed needle bearing
OUTER BEARING: Enduro cartridge bearing
MAXIMUM RIDER WEIGHT: 200 lbs / 90 kgs
RELEASE ANGLE: 15° / 20°
AXLE MATERIAL: 6al / 4v titanium
SPRING MATERIAL: 300 series stainless steel
TRACTION PADS: 1mm installed - 2mm included
CLEATS INCLUDED: 15° / 20° Standard Release, 6° Float
WEIGHT: 249g per pair
Crank Brothers
CRANK BROTHERS MALLET E LS PEDALS
€143,99
€179,99
CRANK BROTHERS MALLET E LS PEDALS
The Mallet E LS pedals by Crank Brother are pedals specially designed for Enduro; in fact, their concave aluminum platform with pins and two grips on each end ensures a secure hold even when the shoe is not clipped in. The pedals are made with a lightweight alloy body, 6 adjustable pins on each side of the pedal, and a slightly beveled front portion to reduce the risk of contact with rocks. The pedal has a spindle that is 5 mm longer to achieve a Q factor of 57 mm (compared to 52 on the Mallet E), which allows for a larger contact surface with the shoe and increased control over the bike. They are particularly suitable for riders with a wide pelvis as they promote stability and ensure maximum comfort.
KEY FEATURES OF CRANK BROTHERS MALLET E LS PEDALS:
Release angle: 15/20°.
Q-Factor: 57 mm.
Weight: 430 g.
Wider axles for maximum control.
Ribbed aluminum platform.
Clipping pins.
Crank Brothers
CRANK BROTHERS STAMP 1 LARGE PEDALS
€42,50
€50,00
CRANK BROTHERS STAMP 1 LARGE PEDALS
The CRANK BROTHERS STAMP 1 LARGE PEDALS are extremely high-performing, with total power transfer, great lightness, and exceptional grip. They are thin pedals (11-13mm) and extremely light since the platform, robust and lightweight, is made of composite material. The chromoly steel axle increases durability. The pedal surface is specific for All Mountain use. The Large version has a 114x111 mm platform, ideal for all those who wear shoe sizes from 43 to 49.
MAIN FEATURES OF CRANK BROTHERS STAMP 1 LARGE PEDALS:
Solid and lightweight composite.
Enduro bearing and Igus LL bearings.
9 grippy pins positioned on each side.
Axle material: steel.
Platform material: composite.
Bearing type: cartridge.
Pedal type: flat.
Dimensions: 114x111 mm (sizes 43-49).
Weight (manufacturer): 329 g (pair).
Crank Brothers
CRANK BROTHERS QUATTRO CLEAT ADAP...
€27,90
€30,00
CRANK BROTHERS QUATTRO CLEAT ADAPTER FROM THREE TO TWO HOLES
The three-hole cleat adapters are the ideal accessory for cyclists looking for optimal performance and comfort during their rides. Made with high-quality materials, these adapters offer a solid base for stable and safe pedaling.
CRANK BROTHERS QUATTRO CLEAT ADAPTER FROM THREE TO TWO HOLES main features:
Float: 6º
Material: Composite / brass
Release angle: 15° / 20°
Weight: 86g per pair
Crank Brothers
CRANK BROTHERS DOUBLE SHOT 1 PEDALS
from €50,99
€59,99
CRANK BROTHERS DOUBLE SHOT 1 PEDALS
The CRANK BROTHERS DOUBLE SHOT 1 HYBRID PEDALS are designed for those who want to alternate between cleated shoes and flat ones when riding their MTB. This model is extremely powerful and high-performing on both sides, it has a wide, grooved platform and the spring is secure and strong. The pedal rotation is buono, the grip is excellent on randonnées and the pedal is extremely light.
MAIN FEATURES OF CRANK BROTHERS DOUBLE SHOT 1 PEDALS:
Hybrid pedals
Grooved composite platform.
Enduro bearings.
Release angle: 15/20°.
Q-factor: 57 mm.
Steel axle: scm 435 forged chromoly.
Premium cleats.
Weight: 331 g (pair).
Crank Brothers
CRANK BROTHERS MALLET E11 PEDALS
€297,51
€350,01
CRANK BROTHERS MALLET E11 PEDALS
The CRANK BROTHERS MALLET E11 PEDALS, in premium edition, are perfect for Enduro. The spring wings are made of titanium to make the pedal light and functional.
CRANK BROTHERS MALLET E11 PEDALS MAIN FEATURES:
Titanium spring wings.
Pedal body in 6061-T6 aluminum.
Q factor 52mm.
Double-chamfered edges to reduce rock strikes.
concave platform for a secure and comfortable support.
Six adjustable pins on each side.
Traction Pad technology.
Knurled surface for better traction when unclipped.
4-sided entry.
Premium bearings with double sealing system.
Igus LL-glide internal bearings.
Enduro-type external cartridge bearings.
300 series stainless steel spring.
Release angle 15°/20°.
Weight (manufacturer, pair) 385 g.
Exclusive black / gold anodized treatment.
Forged scm 435 chromoly steel axle.
300 series stainless steel springs.
Premium cleats INCLUDED.
ITEM CODE
CRB-16093