Burgtec
BURGTEC ENDURO MK3 35 MM STEM
€125,91
€139,90
BURGTEC ENDURO MK3 35 MM STEM
The BURGTEC ENDURO MK3 35 MM STEM is perfetto for tackling all trails with total peace of mind. The clamping surface of the steerer tube has been increased to give a feeling of sturdiness and solidity and to get as close as possible to the MK3 Direct Mount stem. The stainless steel bolts keep rust away. The stem is CNC-machined and anodized.
BURGTEC ENDURO MK3 35 MM STEM KEY FEATURES:
Forged stem, CNC-machined from AL6061 - T6 aluminum
Stainless steel bolts.
Length 35 mm.
Clamp: 35 mm.
ITEM CODE
3413 (Color: Blue) / 3418 (Color: Gold) / 3415 (Color: Kash Bronze) / 3411 (Color: Black) / 3416 (Color: Iron Bronze Orange) / 3414 (Color: Purple) / 3419 (Color: Toxic Barbie) / 3412 (Color: Race Red) / 3417 (Color: Rhod Silver)
Burgtec
BURGTEC ENDURO MK3 35x50MM STEM
€134,91
€149,90
BURGTEC ENDURO MK3 35x50 MM STEM
The BURGTEC ENDURO MK3 35x50 STEM is tutto you need to be able to ride any trail with peace of mind, for when you have to be perfetti to the centimetre.
BURGTEC ENDURO MK3 35x50 MM STEM MAIN FEATURES:
Clamp: 35 mm.
Weight: 120 g.
CNC machined.
Length: 50 mm.
Burgtec
BURGTEC MK2 35 MM HANDLEBAR STEM
€116,90
€129,89
BURGTEC MK2 STEM DIAMETER 35 MM
The BURGTEC MK2 STEM CLAMP 35 MM, CNC machined, is light and stiff: it maintains all the stiffness of the MK1 stem but is lighter, making steering even more precise.
BURGTEC MK2 STEM DIAMETER 35 MM MAIN FEATURES:
35 mm clamp diameter.
0° rise.
Stack height: 40 mm.
Reach 50 mm.
Fully CNC machined.
Fits Rockshox Boxxer, Fox 40, any other fork that uses the IS mount.
Sold with steel bolts.
ITEM CODE
3291 (Color: Black) / 3296 (Color: Orange) / 3292 (Color: Red)
Burgtec
BURGTEC 10MM PEDAL BUSHING
€5,94
€6,60
BURGTEC 10MM PEDAL BUSHING
Non able to fit the bushing into your flat MK4 or MK5 pedals? Don’t worry, this bushing fits perfectly.
ITEM CODE
1483
Burgtec
BURGTEC SHIMANO CRANK BOLT
€9,00
€10,00
BURGTEC SHIMANO CRANK BOLT
Preload bolt for Shimano Hollowtech II crankarms. The product requires a minimum torque and do not exceed the maximum torque recommended by the manufacturers from 0.7 to 1.5 Nm.
SUITABLE FOR:
Saint FC-M800, FC-M820, FC-M825; XTR FC-M9000, FC-M985; XT M7100, FC-M8000, FC-M785, FC-M782, FC-M780, FC-M771, FC-M770, FC-M761, FC-M760;
SLX M6100, FC-M7000, FC-M675, FC-M672, FC-M670, FC-M677, FC-M665, FC-M660; ZEE FC-M645, FC-M640; LX FC-M583, FC-M582; Deore FC-M612, FC-M610, FC-M615, FC-M617, FC-M591, FC-M590; EBike M8000, M8050; Trekking FC-T781, FC-T780, FC-T551, FC-T8000; FC-M532, FC-M542, FC-M545, FC-M552, FC-M590, FC-M596, FC-M591, FC-M610, FC-M617, FC-M660, FC-M665, FC-M770, FC-M771, FC-M780, FC-M785, FC-M6000, FC-M6100, FC-M7000, FC-M7100, FC-M8000, FC-E8000 (EBike), FC-M9000; FC-M622, FC-M625, FC-M627, FC-M552, FC-M545, FC-M543, FC-M542, FC-M533, FC-M532, FC-M4060, FC-M4050;
FC-MT500-3, FC-MT700-2
ITEM CODE
9523 (Color: Blue) / 9528 (Color: Buillon Gold) / 9521 (Color: Black) / 9526 (Color: Orange) / 9524 (Color: Purple) / 9529 (Color: Toxic Barbie) / 9522 (Color: Red) / 9527 (Color: Silver)
Burgtec
PAIR OF BURGTEC STEEL PINS FOR PE...
€26,01
€28,90
PAIR OF BURGTEC STEEL PINS FOR PENTHOUSE MK5 PEDALS
Pair of replacement steel pins for Penthouse MK5 pedals.
ITEM CODE
1673
Burgtec
PAIR OF BURGTEC M4K COMPOSITE PED...
€11,24
€12,49
PAIR OF BURGTEC M4K COMPOSITE PEDAL PINS
Pair of Burgtec replacement pins for Composite MK4 pedals. Made in in SCM415 CR-MO. They are mounted with a 6 mm hex key.
ITEM CODE
1553
Burgtec
PAIR OF BURGTEC MK4 PENTHOUSE STE...
€25,82
€28,69
PAIR OF PINS in STEEL BURGTEC MK4 PENTHOUSE
Replacement pins in tempered En24T steel for Burgtec Penthouse Flat MK4 pedals. Diameter 12 mm. Installed with 8 mm hex key.
ITEM CODE
1473
Burgtec
PAIR OF REPLACEMENT CAPS FOR BURG...
€5,75
€6,39
PAIR OF REPLACEMENT CAPS FOR BURGTEC PENTHOUSE MK4 PEDALS
Pair of replacement caps compatible with BURGTEC PENTHOUSE MK4 PEDALS.
ITEM CODE
1479
Burgtec
CORONA BURGTEC GXP THICK THIN SIN...
€62,90
€69,89
CORONA BURGTEC GXP THICK THIN SINGLE OCP DM
CORONA BURGTEC GXP THICK THIN SINGLE OCP DM compatible with Sram Eagle. Works perfectly with the Boost GXP drivetrain compatible with Direct Mount installation. Keeps the chain in place. The tooth profile, alto and varied, supports the chain in the most technical and abrupt sessions.
CORONA BURGTEC GXP THICK THIN SINGLE OCP DM KEY FEATURES:
Teeth: 28, 30, 32.
Fixing diameter: direct mount.
Offset: 3 mm.
Material: aluminum.
Single corona.
11-12 speed.
Burgtec
CORONA BURGTEC THICK THIN 104 PCD
€49,41
€54,90
CORONA BURGTEC THICK THIN 104 PCD
Thick and thin Corona perfect to pair with Shimano crank arms. Designed to prevent the chain cada even when tackling rough terrain. Corona in aluminum. Compatible with Hyper Glide 12-speed chain.
ITEM CODE
8107 (Teeth: 30 - Color: Black) / 8101 (Teeth: 32 - Color: Black) / 8102 (Teeth: 34 - Color: Black) / 8108 (Teeth: 36 - Color: Black)
Burgtec
CORONA BURGTEC THICK THIN RACE FA...
€53,91
€59,90
BURGTEC THICK THIN RACE FACE CINCH CORONA
corona compatible with RaceFace Cinch fit cranksets.
Burgtec
CORONA BURGTEC THICK-THIN RACE FA...
€62,90
€69,89
CORONA BURGTEC THICK-THIN RACE FACE CINC DIRECT MOUNT
The CORONA BURGTEC THICK-THIN RACE FACE CINC DIRECT MOUNT offers the mechanical advantage of increased transmission. Through numerous test of different prototypes with variable amounts of ovality it was found that 115% (from the center alto) is optimal. This has adequately reduced the dead spot and provided the same perfect chain retention and quietness as round corone. The shortening of the dead spot at the top and bottom of the power curve allows you to return prima to the power phase of the crank rotation.
CORONA BURGTEC THICK-THIN RACE FACE CINC DIRECT MOUNT KEY FEATURES:
All Burgtec corone are +/- 2 teeth, therefore: 30T has a combination of increased power phase 32T and dead spot 28T. 32T has a combination of increased power phase 34T and dead spot 30T.
To choose the right corona, stick to the one currently installed.
Thick and thin tooth profile with Mud Bleed.
10, 11 and 12 speed compatible.
115 degrees of ovality.
Fully CNC machined in 7075 aluminum.
Burgtec
CORONA OVAL BURGTEC OVAL THICK-TH...
€49,41
€54,90
CORONA OVALE BURGTEC OVAL THICK-THIN GXP BOOST 3 MM OFFSET
The CORONA OVALE BURGTEC OVAL THICK-THIN GXP BOOST 3 MM OFFSET offers the mechanical advantage of greater transmission. Through numerous tests of different prototypes with varying amounts of ovality, it was found that 115% (from the center at the top) is optimal. This has adequately reduced the dead spot and has given the same perfect chain retention and quietness as round chainrings. Shortening the dead spot at the top and bottom of the power curve allows you to return sooner to the power phase of the crank rotation.
MAIN FEATURES OF CORONA OVALE BURGTEC OVAL THICK-THIN GXP BOOST 3 MM OFFSET:
All Burgtec chainrings are +/- 2 teeth, therefore: 30T has a combination of an increased power phase of 32T and a dead spot of 28T. 32T has a combination of an increased power phase of 34T and a dead spot of 30T.To choose the right corona, stick to the one currently mounted.
Thick and thin tooth profile with Mud Bleed.
Compatible with 10, 11 and 12 speeds.
115 degrees of ovality.
Fully CNC machined from 7075 aluminum.
Burgtec
CORONA OVAL BURGTEC THICK THIN CI...
€53,91
€59,90
CORONA OVALE BURGTEC THICK THIN CINCH CHAINRING
The CORONA OVALE BURGTEC THICK THIN CINCH CHAINRING offers maximum confidence in the drivetrain and is compatible with RaceFace Cinch fit cranks. Through numerous test of different prototypes with varying amounts of ovality, it was found that 115% (from the center at the top) is optimal. This adequately reduced the dead spot and provided the same perfect chain retention and quietness as round chainrings. Shortening the dead spot at the top and bottom of the power curve allows you to return sooner to the power phase of the crank rotation.
KEY FEATURES OF CORONA OVALE BURGTEC THICK THIN CINCH CHAINRING:
Compatible with RaceFace Cinch fit cranks.
All Burgtec chainrings are +/- 2 teeth, therefore: 30T has an increased power phase combination of 32T and a 28T dead spot. 32T has an increased power phase combination of 34T and a 30T dead spot.
To choose the right corona, stick to the one currently installed.
Thick and thin tooth profile with Mud Bleed.
10, 11 and 12-speed compatible.
115 degrees of ovality.
Fully CNC machined from 7075 aluminum.
Burgtec
BURGETC UNIVERSAL DERAILLEUR HANG...
€44,91
€49,90
BURGETC UDH UNIVERSAL DERAILLEUR HANGER
Universal derailleur hanger perfetto for replacing the original damaged one. Uniquely forged and fully machined in aluminum, it follows the SRAM design, incorporating a design that allows backward rotation in caso di forward impact. Sold with washer and mounting bolt.
BURGETC UDH UNIVERSAL DERAILLEUR HANGER MAIN FEATURES:
Compatible with all frames designed to accommodate the SRAM UDH.
Compatible with all MTB and E-MTB drivetrains.
Forged and fully machined in 7075 aluminum.
Supplied with mounting bolt and washer.
Diameter dell'asse passante M12 x 1.0.
Burgtec
BURGTEC MK2 GOPRO FRONT PLATE
€44,91
€49,90
GOPRO BURGTEC MK2 FACEPLATE
Replacement component with GoPro mount. 35 mm.
ITEM CODE
3323 (Color: Blue) / 3328 (Color: Gold) / 3326 (Color: Orange) / 3324 (Color: Purple) / 3322 (Color: Red)
Burgtec
BURGTEC PENTHOUSE MK5 SPARE PARTS...
€11,97
€13,30
BURGTEC PENTHOUSE MK5 REPLACEMENT KIT
The kit of 32 pins for a pair of BURGTEC PENTHOUSE Mk5 pedals allows you to restore the original grip of the pedals. Pins in stainless steel.
ITEM CODE
1674
Burgtec
BURGTEC M4K COMPOSITE PEDAL REPLA...
€23,40
€26,00
BURGTEC M4K COMPOSITE PEDAL SPARE PARTS KIT
Spare parts kit for BURGTEC M4K composite pedals to always keep your pedals in perfect working order with new internal components.
THE KIT CONTAINS:
2 seals.
2 x large bushings.
2 bearings.
2 end caps.
1 left nut.
1 right nut.
2 washers.
ITEM CODE
1551
Burgtec
BURGTEC PENTHOUSE MK3 PEDAL REPAI...
€18,72
€20,80
BURGTEC PENTHOUSE MK3 PEDAL REPAIR KIT
Kit for repairing the axle joints of the BURGTEC PENTHOUSE MK3 pedals.
DISCOUNT CODE
1375
Burgtec
BURGTEC PENTHOUSE MK5 PEDAL REPAI...
€18,72
€20,80
BURGTEC PENTHOUSE MK5 PEDAL REPAIR KIT
The refurbishment kit for a pair of BURGTEC PENTHOUSE Mk5 pedals allows you to repair the pedal axle joints.
ITEM CODE
1675
Burgtec
BURGTEC MK5 PEDAL MAINTENANCE KIT
€28,80
€32,00
BURGTEC MK5 PEDAL MAINTENANCE KIT
Tutto you need to keep your Penthouse Flat MK5 pedals like new.
THE KIT INCLUDES:
Tool for removing bushings and small bearings.
Small press tool for bushings.
Large press tool for bushings.
Press tool for bearings.
ITEM CODE
1681
Burgtec
BURGTEC MK4 ALUMINUM PEDAL REPAIR...
€18,72
€20,80
BURGTEC MK4 ALUMINUM PEDAL REPAIR KIT
The refurbishment kit for a pair of BURGTEC Mk4 aluminum pedals allows you to repair the pedal axles.
ITEM CODE
1475
Burgtec
BURGTEC THE BARTENDER GRIPS
€17,91
€19,90
BURGTEC THE BARTENDER GRIPS
The BURGTEC THE BARTENDER GRIPS are ultra-thin and tapered and have a diameter of 30 mm. The grip locks securely to the handlebar thanks to a 7075 aluminum collar and a stainless steel bolt. The rubber compound and the knurling provide excellent grip and high traction.
BURGTEC THE BARTENDER GRIPS KEY FEATURES:
Weight 90 g.
"Low Profile" design.
Diameter 30 mm.
ITEM CODE
5503 (Color: Blue) / 5509 (Color: Grey) / 5505 (Color: Gum) / 5501 (Color: Black) / 5507 (Color: Orange) / 5508 (Color: Purple) / 5502 (Color: Red) / 5506 (Color: Yellow)