MTB

DEITY BLACKLABEL HANDLEBAR 31.8X800 RISE 38MM The Blacklabel Deity handlebar is an excellent choice for the most demanding bikers. Made of lightweight aluminum, it has a diameter of 31.8 mm and a length of 800 mm. Its 38 mm rise offers a secure grip and comfortable riding. DEITY BLACKLABEL HANDLEBAR 31.8X800 RISE 38MM KEY FEATURES: Made of lightweight aluminum Diameter of 31.8 mm and length of 800 mm 38 mm rise for a secure and comfortable grip ITEM CODE: DEBLK38BL (Color: Blue)

AL7075-T6 bolt for UDH with left-hand thread and M12x1 mm internal hole for thru-axle. COMPATIBILITY: X-Hanger UDH derailleur hanger. X-Hanger DM DA9200 derailleur hanger. Can replace the stock bolt on original SRAM UDH derailleurs. May not be compatible with derailleur hangers from other brands.

The Yes Machine Welcome to a world beyond power. A world where going far and fast is a given. Whatever the trail sfida, the answer is always “yes”. Orbea Wild is a bike built without compromises. Light and fully optimized, it comes out of our factory ready for action, with the latest Bosch motor and top-level race-ready setups. Light in weight, powerful in performance Designed to deliver high performance, the Wild combines optimized weight distribution, 170 mm of travel and gravity-oriented geometry. The Wild tames the wildest trails but always remains viva, responsive and engaging — far from the dull, isolated feeling of many e-bikes. This balance between lightness and rigidity is the base of the Wild’s incredible handling. Advanced construction, high-performance materials Whatever material you choose, you can be sure we have made no compromises: every Wild is built with the utmost care and with superior construction techniques. Optimized rigidity for e-bikes An e-bike must be about 10% more rigid than an equivalent muscle bike to offer similar performance. To achieve this without adding unnecessary weight, an uncompromising frame design is required. The reinforced frame allows increased rigidity in the bottom bracket area, while our SBS (Secure Battery System) reduces complexity and superfluous elements. Light, lighter, lightest The best materials, the smartest designs and key technologies such as the SBS design make the Wild one of the lightest full-power e-bikes in the world. All else being equal, a lighter bike means superior performance, greater range and better handling. Infinite power and unlimited range Fully powered and ready for tutto, the Wild is designed for maximum fun on the steepest climbs and the most demanding descents. The combination of the latest-generation Bosch motors and advanced batteries delivers power, control and extraordinary range. Performance through simplicity “Performance through simplicity” means eliminating everything superfluous and keeping only what directly improves the riding experience. Sealed internal cables Shorter cables, fewer vibrations and more direct routing ensure better performance and simplified maintenance. ORBEA WILD M10 750WH BIKE MAIN FEATURES: - Wheel Diameter: 29 - Gears: 12 - Motor: Bosch - Battery (Wh): 750 - Travel (mm): 170 THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS - Frame: Orbea Wild OMR 2025, 29" wheels, Concentric Boost 12x148 - Motor: Bosch Performance Line CX BDU3843 - Display: Bosch System Module Kiox 400C - Battery: Bosch Powertube 750Wh Horizontal BBP3770 - Charger: N/A - Fork: Fox 38 Float Performance 170 Grip 3-Pos QR15x110 - Shock: Fox Float X Performance Trunnion 2-Pos Evol LV custom tune 205x65mm - Rear derailleur: Shimano XT M8100 SGS Shadow Plus - Front derailleur: N/A - Shift lever: Shimano SLX M7100 I-Spec EV - Cassette: Shimano CS-M7100 10-51T 12-speed - Chain: Shimano M6100 - Chainring: e*thirteen Helix Core - Crankset: N/A - Front brake: Shimano XT M8220 hydraulic disc - Rear brake: Shimano XT M8220 hydraulic disc - Brake rotors: N/A - Front tire: Maxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra - Rear tire: Maxxis Minion 2.40" 120 TPI 3CT/DD/TR MaxxTerra - Rims: DT Swiss H-1900 Spline 30c TLR 15/110mm 6-Bolt - Front hub: N/A - Rear hub: N/A - Handlebar: OC Mountain Control MC20 Alu SL, Rise 20, width 800 mm - Stem: OC Mountain Control MC20, angle 0° - Saddle: Fizik Aidon 208x145 mm with manganese rails - Seatpost: OC Mountain Control MC22, 31.6 mm, dropper - Maximum permitted weight: N/A - Weight: N/A *PRO-M STORE OFFERS A FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED

ORBEA OIZ M-PRO BIKE Orbea Oiz M-Pro 2026: take control. Do not accept compromises. The Oiz is not a down-country or a trail, but a superb 120 mm XC racing weapon, as beautiful as it is effective. Modern geometries and intelligent suspension, designed from scratch around 120 mm, for extra fun on every ride without compromises on weight and efficiency. Simply put, the Oiz is the fastest XC bike that has ever come out of the Orbea factories in over 180 years. By removing everything superfluous and adding only what improves your rides, the Oiz frame has reached 1750 grams, one of the lightest on the market. Lightness is the key to a fast XC bike, and by endlessly searching for the simplest solutions, Orbea has ensured that the Oiz does not have to compromise in order to be fast. ORBEA OIZ M-PRO BIKE MAIN FEATURES: Wheel Diameter: 29 Gear Speeds: 12 THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Orbea Oiz Carbon OMX, Fiberlink, Boost, BSA, SIC, UFO, I-line shock Fork: Fox 34 Float SL Factory 120, Grip SL, Remote-Adj Push to Lock, QR15x110, Kashima Shock absorber: Fox Float SL Factory 120mm Remote Push-lock Evol Kashima custom tune 190x45mm Rear derailleur: Shimano XT M8250 SGS Front derailleur: N/A Shifter: Shimano XT M8250 Cassette: Shimano CS-M8200 10-51T 12-Speed Chain: Shimano M8100 Chainring: N/A Crankset: Shimano XT M8200 34T Front brake: Shimano XT M8200 Hydraulic Disc Rear brake: Shimano XT M8200 Hydraulic Disc Rotors: N/A Front tire: maxxis Rekon Race 2.40" WT 120 TPI Exo TLR Rear tire: maxxis Rekon Race 2.40" WT 120 TPI Exo TLR Rims: Oquo mountain performance MP30TEAM Front hub: N/A Rear hub: N/A Handlebar: OC mountain performance MP10 Carbon, Cockpit, width 760 mm Stem: N/A sella: fizik Vento Antares R7 Alloy Rail 140 mm Seatpost: OC mountain performance DP-MP10, 31.6 mm, Dropper Maximum permitted weight: N/A Weight: N/A *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

TRP PREMIUM GOLD BLEED KIT The TRP Premium GOLD Bleed Kit is the perfetto ally to keep your components in perfect condition. Compatible with all SHIMANO, TRP and TEKTRO models, it allows you to carry out the necessary maintenance with ease and precision. Remember that the use of non-original oils could invalidate the product warranty, so make sure to always use the recommended products. TRP Bleed Kit Premium gold main features: Ideal for bleeding disc brakes and hydraulic systems Compatible with all SHIMANO, TRP and TEKTRO models Easy to use for precise and effective maintenance Premium design in GOLD color Warning: the use of non-original oils could invalidate the warranty

HT ANS10 SUPREME PEDAL The HT ANS 10 flat pedals are perfetti for MTB/BMX use. They have a larger support surface compared to the previous ANS01 model, offer a more stabile grip and greater bike control even in difficult situations. They are made of CNC-machined aluminum and the pins are replaceable. HT ANS10 SUPREME PEDAL KEY FEATURES: Flat Supreme ANS10 pedals. Pedal body in CNC-machined aluminum. Spindle in CNC-machined chromoly. Dimensions: 100 x 100 x 16.6 mm. Sealed bearing movement. Replaceable pins. Weight: about 370 g.

CANNONDALE MOTERRA SL 1 BIKE Just call it the “perfect point” – the best of both mondi. The power and range of a big e-bike, combined with the agility and handling of a lightweight bike. In other words, exactly what e-MTB riders have been waiting for. The Moterra SL might simply be the most fun mountain bike we have ever made. With the thrill of full power and the agility of a lightweight bike, the Moterra SL 1 is designed to go faster, tackle more demanding trails, and deliver excellent performance on every type of terrain. Our lightest full-power eMTB frame has 150 mm of tuned Proportional Response suspension and FlexPivot chainstays to maximize traction without adding weight. A custom Shimano EP801 motor unit delivers 85 Nm of torque the very moment your legs demand it, while the 601 Wh battery ensures generous range in a lightweight package. The full Fox Factory setup and tough DT Swiss XM 1700 wheels follow the terrain with unwavering grip, the SRAM XO AXS drivetrain offers precise wireless shifting, and the “mullet” wheelset—29” front and 27.5” rear—perfectly balances fun and precise handling. Lots of power, little weight. Electric mountain bikes with this much power have never been this light. The lightweight carbon frame features our FlexPivot technology to save weight, and houses a customized battery that packs more watts per kilo than any other on the market. This unmatched power-to-weight ratio makes riding incredibly fun. Full throttle The power comes from a customized version of the Shimano EP801: the lightest motor capable of delivering the big power we were looking for. With 85 Nm of torque and a peak output of 600 W, it brings maximum power into the realm of lightweight e-bikes. Maximum power We developed custom ride modes for the Moterra SL, specifically optimized for the kind of high-speed rides this machine encourages. Four different assistance levels, easily adjustable while riding, help you choose between maximum range, monstrous power, or the ideal mix of both. Laid-back or full gas, every ride on the Moterra SL will be exactly how you want it. Superb handling At first glance, it looks a bit crazy: an adjustable slack head angle like a DH bike, the long reach and steep seat angle of a modern trail bike, suspension configuration and geometry fully customized by size. When you put all these dettagli together, you get a truly incredible bike. Lively suspension Much more than a weight-saving trick, our robust FlexPivot stays are also the heart of our suspension design; acting as a Horst link, they in fact create a true four-bar system, allowing our engineers to tune the perfetto suspension response to the loads. The result? Incredible traction, confident braking, and a playful feeling that will have you pushing to the limit. CANNONDALE MOTERRA SL 1 BIKE KEY FEATURES: Light and durable carbon frame with 150 mm of travel and FlexPivot system, Proportional Response suspension kinematics Top-level Fox Factory suspension – 160 mm Factory Float 36 fork and Factory Float X rear shock Top-of-the-range e-MTB SRAM groupset – 12-speed XO AXS wireless derailleur, e*thirteen Race Carbon crankset and Magura MT7 hydraulic disc brakes Light and strong DT Swiss XM 1700 Spline wheelset, tubeless-ready for all-mountain OneUp V3 dropper post and Hollowgram SAVE carbon handlebar that reduces vibrations Shimano EP801 motor optimized by Cannondale and custom high energy density 601 Wh internal battery THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS: Frameset Frame Moterra SL Carbon, 150mm travel, Proportional Response Tuned Suspension, FlexPivot Chainstay, direct mount internal battery, engineered plastic skid plate, 55mm chainline, internal cable routing, 29” FlipChip, 148x12mm Maxle thru-axle, UDH hanger, 200mm native post mount brake, angle adjust headset Fork Fox Float Factory 36, 160mm travel, Grip X2 Damper, Kashima coating, 15x110mm Kabolt thru-axle, tapered steerer, 44mm offset Headset Acros Adjustable Angle (1.2°) Rear Shock Fox Float X Factory, 2 pos adj, EVOL LV, 210x55mm E-System Motor Shimano EP801, 85Nm, Custom Tuned, Eco, Trail 1, Trail 2, Boost Modes Battery Custom 601Wh battery Battery Charger Custom 4A Display Shimano SC-EM800 Cycle Computer, Bluetooth LE Compatible Drivetrain Rear Derailleur SRAM XO Eagle AXS, T-Type Shifters SRAM AXS POD Controller Chain SRAM XO Eagle, T-Type, 12-speed Crankset e*thirteen e*spec Race Carbon, 160mm (S/M), 165mm (L/XL), 34T Cassette SRAM XO Eagle, 10-52, T-Type, 12-speed Brakes Brakes Magura MT7 4-piston hydraulic disc, 203/203mm Storm HC 6-bolt rotors Brake Levers Magura MT7 HCW hydraulic disc Wheels Rims DT Swiss XM 1700 Spline, 30mm inner width, TC tubeless ready Spokes DT Swiss Competition, straight-pull Tire Size 2.5 Wheel Size 297 Hubs (F) DT Swiss 350, 15x110mm / (R) DT Swiss 350 Ratchet System 36 SL, 12x148mm Tires (F) Maxxis DHF, 29x2.5", 3C, EXO+, tubeless ready / (R) Maxxis Dissector, 27.5x2.4", 3C, EXO+, tubeless ready Components Handlebar HollowGram SAVE riser bar, Carbon, 35mm clamp, 30mm rise, 8° sweep, 5° rise, 780mm Stem Cannondale 1, 7075 Alloy, 1-1/8", 35mm, 0° Grips Cannondale TaperRidge Saddle Fizik Terra Aidon X3, Mobius Kium alloy rail Seatpost OneUp V3, internal routing, 31.6, 180mm (S), 210mm (M/L), 240mm (XL) *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED

HOPE REAR BRAKE TECH4 E4 SILVER The HOPE REAR BRAKE TECH4 E4 is perfetto to be mounted on Enduro MTBs and is the perfetto compromise between power and consistency, with the same power and bite as the Tech3. Compared to the previous model it has 30% higher power and the bearings positioned in place of the springs on the levers improve bite and power.The brake caliper is the same as the Tech3: the block forged in aluminum promotes heat management and the large piston size increases power. HOPE REAR BRAKE TECH4 E4 SILVER KEY FEATURES: Brake fluid: Dot 5.1. Aerospace Hose Length: rear 160 cm. Aluminum lever. Semi-metallic pads. Discipline: Downhill/Freeride, Enduro. DISK AND ADAPTER non INCLUDED. TO BE PURCHASED SEPARATELY

SRAM BASIC BLEED KIT SRAM Basic Bleed Kit - All Sram, Avid models and old Formula models

SPECIALIZED TRAIL 31.8 STEM The SPECIALIZED TRAIL 31.8 STEM is forged and CNC-machined and is perfect for trail use. Excellent stiffness/weight ratio. SPECIALIZED TRAIL 31.8 STEM KEY FEATURES: Made of forged 6061 alloy and CNC-machined. 4-bolt handlebar interface, 31.8mm. Lengths: 40 mm, 50 mm and 60 mm. Compatibility with carbon fiber handlebars. ITEM CODE 20118-1140 (40mm - Color: Black) / 20118-1150 (50mm - Color: Black) / 20118-1160 (60 mm - Color: Black)

WAG FLAT NYLON PEDALS The Wag FLAT pedals are the perfect accessory to tackle any type of route on a mountain bike. With an elegant design and robust construction, these pedals are designed to offer optimal performance and long-lasting durability. MAIN FEATURES OF WAG FLAT NYLON PEDALS: Made of resin for greater strength and lightness Chromoly axle on bearing + DU bushing for a smooth and reliable pedaling 10 pins per side ensure excellent grip even in difficult conditions Dimensions: 116 x 110 x 16 mm, ideal for comfortable and safe pedaling Weight of 420 g (pair) for light and responsive pedaling

TURBO LEVO SPECIALIZED BATTERY MOUNTING PIN S166800004 Pin for securing the battery, compatible with all Specialized Turbo Levo electric bikes. COMPATIBLE WITH: 2022 SPECIALIZED M1 BATTERY 2021 SPECIALIZED M1 BATTERY 2019 KENEVO FSR COMP 6FATTIE 2019 KENEVO FSR COMP 6FATTIE NB 2019 KENEVO FSR EXPERT 6FATTIE 2019 KENEVO FSR EXPERT 6FATTIE NB 2019 SPECIALIZED M1 BATTERY 2018 KENEVO FSR EXPERT 6FATTIE 2018 KENEVO FSR EXPERT 6FATTIE NB 2018 KENEVO FSR EXPERT TLD 6FATTIE 2018 KENEVO FSR EXPERT TLD 6FATTIE NB 2018 LEVO FSR MEN 6FATTIE 2018 LEVO FSR MEN 6FATTIE NB 2018 LEVO FSR MEN COMP 6FATTIE 2018 LEVO FSR MEN COMP 6FATTIE NB 2018 LEVO FSR MEN COMP CARBON 6FATTIE 2018 LEVO FSR MEN COMP CARBON 6FATTIE NB 2018 LEVO FSR MEN EXPERT CARBON 6FATTIE 2018 LEVO FSR MEN EXPERT CARBON 6FATTIE NB 2018 LEVO FSR MEN ST 29 2018 LEVO FSR MEN ST 29 NB 2018 LEVO FSR MEN ST COMP 29 2018 LEVO FSR MEN ST COMP 29 NB 2018 LEVO FSR MEN SW CARBON 6FATTIE 2018 LEVO FSR MEN SW CARBON 6FATTIE NB 2018 LEVO FSR WMN COMP 6FATTIE 2018 LEVO FSR WMN COMP 6FATTIE NB 2018 LEVO FSR WMN ST 6FATTIE 2018 LEVO FSR WMN ST 6FATTIE NB 2018 LEVO HT MEN 29 2018 LEVO HT MEN 29 NB 2018 LEVO HT MEN COMP 6FATTIE 2018 LEVO HT MEN COMP 6FATTIE NB 2018 LEVO HT WMN 29 2018 LEVO HT WMN 29 NB 2018 LEVO HT WMN COMP 6FATTIE 2018 LEVO HT WMN COMP 6FATTIE NB 2018 TURBO LEVO BATTERY W ROCKGUARD 2017 LEVO FSR 6FATTIE 2017 LEVO FSR 6FATTIE NB 2017 LEVO FSR COMP 6FATTIE 2017 LEVO FSR COMP 6FATTIE NB 2017 LEVO FSR EXPERT 6FATTIE 2017 LEVO FSR EXPERT 6FATTIE NB 2017 LEVO FSR EXPERT TLD 6FATTIE 2017 LEVO FSR ST 29 2017 LEVO FSR ST 29 NB 2017 LEVO FSR ST COMP 29 2017 LEVO FSR ST COMP 29 NB 2017 LEVO FSR SW 6FATTIE 2017 LEVO FSR SW 6FATTIE NB 2017 LEVO FSR WMN COMP 6FATTIE 2017 LEVO FSR WMN COMP 6FATTIE NB 2017 LEVO FSR WMN ST 6FATTIE 2017 LEVO FSR WMN ST 6FATTIE NB 2017 LEVO HT 29 2017 LEVO HT 29 NB 2017 LEVO HT COMP 6FATTIE 2017 LEVO HT COMP 6FATTIE NB 2017 LEVO HT FAT COMP FAT 2017 LEVO HT FAT COMP FAT NB 2017 LEVO HT WMN 29 2017 LEVO HT WMN 29 NB 2017 LEVO HT WMN COMP 6FATTIE 2017 LEVO HT WMN COMP 6FATTIE NB 2017 TURBO LEVO BATTERY W ROCKGUARD 2016 LEVO FSR 6FATTIE 2016 LEVO FSR COMP 6FATTIE 2016 LEVO FSR EXPERT 6FATTIE 2016 LEVO FSR SW 6FATTIE 2016 LEVO FSR WMN COMP 6FATTIE 2016 LEVO HT 29 2016 LEVO HT COMP 6FATTIE 2016 LEVO HT FAT COMP FAT 2016 LEVO HT WMN 29 2016 LEVO HT WMN COMP 6FATTIE

SRAM PC NX EAGLE 12S CHAIN The base of every Sram Eagle drivetrain is the chain and this model is designed and manufactured using the authentic Eagle architecture to make it compatible with all Eagle components. The NX Eagle chain features solid pin construction, Eagle PowerLock and smooth, efficient shifting you can rely on in every situation. SRAM PC NX EAGLE 12S CHAIN MAIN FEATURES: The Eagle PowerLock chain connector with FLOW LINK technology ensures better chain retention and greater longevity. The unique features and design also ensure greater wear resistance for Eagle cassettes and chainrings. 12 speeds. Compatible with all Sram Eagle drivetrains. Closure type: quick link (Power Lock). Outer maglie finish: glossy. Outer maglie color: grey. Inner plate finish: glossy. Inner link color: grey. Chain connector: PowerLock. 126 maglie. TECHNOLOGIES Flow Link: The inner chain maglie are ultra-smooth and completely free of sharp edges: the result is the perfect coupling between cassette cogs and chain, with less friction, greater quietness and long service life. The overall design is narrower, able to withstand greater angles, and in addition it has flat outer maglie that provide stronger riveting and higher resistance. PowerLock: Sram engineers developed PowerLock® technology as a safe, durable chain mounting method that above all does not require tools. Given the tighter tolerances of 10-, 11-, and 12-speed drivetrains, so as not to reduce drivetrain performance each individual PowerLock can be used only once. ITEM CODE 00.2518.031.011

SRAM CRANK ARM PROTECTION XX - XX SL T-TYPE 2 PIECES The pair of protections for SRAM Eagle XX and XXSL crankset in black is the perfect accessory to protect your crankset during your mountain bike adventures. Made with high-quality materials, these protectors ensure greater durability and resistance, allowing you to tackle any terrain with safety and peace of mind. SRAM CRANK ARM PROTECTION XX - XX SL T-TYPE 2 PIECES main features: Reliable protection for the Eagle XX and XXSL crankset Made with durable materials for greater longevity Elegant and discreet black design Easy to install and remove

MICHELIN DH34 29X2.40 TUBELESS READY TYRE The MICHELIN DH34 is the fastest tyre in the downhill range and offers excellent performance on rocky, challenging terrain and in bike parks thanks to the Magi-X DH compound. The DH 34 tread pattern, the Magi-X FH tread compound and the Down Hill Shield casing provide maximum grip and stability at high speeds on all hard terrains. The Down Hill Shield casing and the puncture-resistant reinforcement offer both maximum robustness and maximum control at low pressure. MICHELIN DH34 29X2.40 TUBELESS READY TYRE MAIN FEATURES: Use: downhill. Size: 29x2.40. Magi-X DH compound: Rubber compound specifically designed for downhill to provide maximum grip on dry and wet surfaces at any temperature. Technology that offers maximum grip. The Down Hill Shield casing and puncture-resistant reinforcement offer both maximum robustness and maximum control at low pressure. ITEM CODE 305651460

Specialized S210600002 turbo levo 2022 bearing kit Bearing kit for Specialized Turbo Levo 2022 ITEM CODE: S210600002 Barcode: 888818767199

Specialized S196800021 Power cable turbo levo sl Power cable for Turbo Levo SL, Turbo Vado SL and Turbo creo SL 2020 - 2021. ITEM CODE: S196800021 Barcode: 888818578573

BURGTEC PENTHOUSE FLAT MK5 PEDALS The BURGTEC PENTHOUSE FLAT MK5 PEDALS are grippier, more durable, and lighter than ever. Their size is 7% larger than the previous MK4 version, with a weight reduced by 65 grams per pair. The pin diameter has been reduced by 0.5 mm. The internals are the most wear-resistant on the market, thanks to the Igus bushings and their "Endurance Runner" - W300 - material: the ingress of mud and water is kept at bay by a rubber seal on the inside, while the grease is retained inside. BURGTEC PENTHOUSE MK5 FLAT PEDALS KEY FEATURES: Grippy, durable, and long-lasting Larger size and lower weight than the previous MK4 version Weight: 379 g (steel axle). Platform material: 7075 alloy. Profile: 15 mm. Platform: 100 mm x 102 mm. Dish: 2 mm (concave). Pin material: Stainless steel. Pin width: 3.5 mm. Pin height: 4.5 mm. Axle material: EN24T steel. Internals: 2 Igus W300 bushings, single sealed bearing, and internal rubber seal. ITEM CODE 1603 (Color: Blue) / 1605 (Color: Gold) / 1601 (Color: Black) / 1606 (Color: Orange) / 1604 (Color: Purple) / 1609 Penthouse (Color: Pink) / 1602 (Color: Red) / 1608 (Color: Polished) / 1607 (Color: Silver).

SPECIALIZED BATTERY FOR TURBO VADO Lithium-ion battery with a capacity of 604Wh and compatible with all Specialized Turbo Vado models. Complete integration with the frame, removable so it can be charged easily and anywhere, with lock for maximum security. MAIN FEATURES OF SPECIALIZED BATTERY FOR TURBO VADO: Capacity 604Wh Compatibility with all Specialized Turbo Vado Integration in the down tube. With lock. Removable in modo that it can be charged both on the bike and in casa. With LED indicator. Cover non included. Shipping solo in store. Returns solo through stores. ITEM CODE 98917-5633

SEND-HIT PAIR OF ADJUSTABLE MTB HANDGUARDS • Total weight: 168 g (pair)• Reinforced aluminum mounting bracket for maximum rigidity• Handguard made of ultra-resistant Nylon• Made in France

SELLA prologo SCRATCH M5 140 PAS TIROX black Scratch M5 uses 4.0 technologies; innovative in terms of size, forma and ergonomics to be suitable for multiple uses and disciplines. Thanks to the new design, dimensions and ergonomic “T SHAPE” forma, Scratch M5 is unisex. The dimensions are 250 x 140 mm and the weights vary depending on the model: the version with Nack carbon weighs solo 132 g, while the Tirox version (light alloy steel) 201 g. The new seating system MSS - Multi Sector System, designed in collaboration with the Politecnico di Milano, helps improve comfort and performance. The active foams, separate from each other, create 5 zone that work intelligently and individually, promoting the normal pedaling movement both in the pushing and pulling phases. The round forma of Scratch M5 allows a natural rotation of the pelvis, creating stability and support for the lumbar area; it also promotes the distribution of pressure over a larger surface. Ride without pain with the relief channel designed by prologo. The PAS (Perineal area System) is a channel designed to eliminate pressure peaks and numbness, improving blood flow. Its particular ergonomically shaped design, aided by variable-density foam, eliminates contact points in the prostatic-genital zone. The PAS channel is optimal for users who prefer performance combined with comfort over long and medium distances. SELLA prologo SCRATCH M5 140 PAS TIROX black main features: MSS (Multi Sector System) seating system for maximum comfort and the best performance PAS (Perineal area System): a channel designed to eliminate pressure peaks and numbness, improving blood flow T-Shape: for maximum freedom of movement and choice of position on the sella Forma sella: Round Unisex Rail: TiroX (7 mm) Misura: 250x140 mm

SRAM EAGLE AXS BATTERY COVER SRAM battery cover for Eagle AXS rear derailleur. Protects the derailleur from impacts and splashes. Compatible derailleurs: GX AXS, X01 AXS and XX1 AXS 12v. ITEM CODE M00.7518.156.000

SELLA WTB VOLT STEEL MEDIUM 142 MM The VOLT is the most popular mountain sella from WTB: from bikepacking to racing, the Volt allows you to pedal tutto day and always remain comfortable in sella. SELLA WTB VOLT STEEL MEDIUM 142 MM MAIN FEATURES: Microfiber cover / Flex-Tuned shell / DNAx padding. The thickness of the padding provides ample support. Steel rails. Width: 265 mm. Weight: 315 g. Clamp style: Std rails. Length: 142 mm. ITEM CODE W065-0587

CANNONDALE KP255 DERAILLEUR HANGER Derailleur hanger compatible with 2013 CAAD 8 (OR kp158/), 2013 SYNAPSE ALLOY LC, 2013 QUICK CX, SL, CARBON, 2013 CAAD X. ITEM CODE KP255