MTB

Suspension pivot bolt kit 98914-5003 Specialized The suspension pivot bolt kit 98914-5003 by Specialized is designed for 2014-2017 Epic FSR and Era FSR bicycles. With all the bolts and washers for the suspension pivots, this kit is essential to keep your bike in perfect working condition. Main features of the suspension pivot bolt kit 98914-5003 Specialized: Compatible with 2014-2017 Epic FSR and Era FSR bicycles Includes all the bolts and washers needed for the suspension pivots ITEM CODE: 98914-5003 Barcode: 719676839394

YETI SB120C KIT C2 BIKE The YETI SB120C, with KIT C2, is a “downcountry” bike: it has the lightness of an XC bike, it pedals like an XC, it goes faster downhill than an XC bike and it has no lockouts on the handlebar. The Switch-Infinity floating pivot suspension sets new expectations for kinematics, longevity, sensitivity and strength.The frame silhouette takes inspiration from the SB160 and torsional precision and ground clearance have been increased, without transferring unwanted feedback to the rider. And the refined Switch Infinity makes this bike far more capable than its weight might suggest.The brand-new pivot design uses 100% standard-size cartridge bearings secured with precision: machined floating axles. All bearings are press-fit into the rear triangle or the front triangle.A relatively linear progression curve offers riders an active and usable travel with 30% sag, a much greater margin than other bikes with 120 mm of travel. The SB120’s small-bump sensitivity offers incredible traction. The mid-stroke has support that ensures riders don’t use up all the travel when aggressively cornering or lifting the wheels off the ground. The “Oh Shit!” moments are handled with ease: the compression curve has been tuned for greater control from start to finish.The bottom bracket is a threaded aluminum unit with integrated ISCG-05 mounts. If a derailleur hanger incident occurs, the new Yeti models use the UDH (Universal Derailleur Hanger) interface, the standard mount for a rear derailleur.The shorter seat tube allows the use of a longer dropper post. Most riders will be able to use a 150 mm dropper post on Small* frames, 175 mm on Medium* frames and 200 mm+ on L-XXL* frames (depending on the actual saddle height on the specific bike size).The ultra-compact, minimalist one-piece shock link has been specially designed for the needs of the shorter suspension travel of the SB120. In practice it optimizes the leverage rate by pushing the shock forward into the frame. This forward placement allows for a wide range of shock compatibility, decreases standover height, reduces overall link and pivot size, increases water bottle compatibility and increases available downtube clearance.The agile reach lets the bike dart nimbly along singletrack. Its steep seat angle makes climbing easier. Its head angle and balanced suspension travel prioritize downhill fun, making it an incredible Trans-Cascadia-style bike: the geometry of the sb120 is so balanced and agile that you might forget how much travel you have at your disposal. YETI SB120C KIT C2 BIKE MAIN FEATURES: Frame with 120 mm of travel. New switch infinity. Threaded bottom bracket. More clearance at the bottom of the downtube. UDH derailleur hanger. Shorter seat tube to install longer dropper posts. Chainstay length varies by size. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS DETTAGLI: C2, C series carbon, SRAM GX Eagle, Fox Performance 34 Fork FRAME: C/Series carbon fiber frame, Switch Infinity suspension technology, Threaded BB, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, Universal derailleur hanger (UDH), and axle. FORK: FOX FACTORY 34 GRIP2/130MM. MATERIAL: C SERIES. TRAVEL: 120MM (4.7"). SHOCK: FOX FACTORY FLOAT DPS. WHEELS: CRANK BROTHERS SYSTHESIS ENDURO 30MM REAR DERAILLEUR: SRAM GX EAGLE. SHIFTERS: SRAM GX EAGLE. CRANKSET: SRAM GX EAGLE 30T 170MM. BOTTOM BRACKET: SRAM DUB BSA 73. CASSETTE: SRAM GX EAGLE 1275 10-52. CHAIN: SRAM GX EAGLE. BRAKES: SRAM G2 RSC. ROTORS: SRAM CENTERLINE 180/SRAM CENTERLINE 180. SEATPOST: ONEUP DROPPER POST 31.6MM / XS-SM: 150MM, MD: 180MM, LG-XXL: 210MM. FRONT TIRE: MAXXIS MINION DHF 2.5 EXO. REAR TIRE: MAXXIS AGGRESSOR 2.3 EXO. HEADSET: CANE CREEK 40 INTEGRATED. HANDLEBAR: BURGTEC RIDE WIDE ALLOY ENDURO 35X780MM. STEM: BURGTEC ENDURO MK3 35X50MM. GRIPS: ODI ELITE PRO. SADDLE: SILVERADO CUSTOM. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED

CORONA CANNONDALE SPIDERING 50-34T The Cannondale OPI SpideRing (8arms) is an essential component for cycling enthusiasts who seek high-level performance and innovative design. With its cutting-edge technology and superior build quality, this product is designed to offer an exceptional riding experience on the road or off-road. Add a touch of unique style to your bike with Cannondale’s OPI SpideRing (8arms) and get ready to face any challenge with confidence and determination. CORONA CANNONDALE SPIDERING 50-34T main features: Made with high-quality materials to ensure strength and long-term durability Innovative 8-arm design to maximize efficiency and power transfer Compatible with diverse crankset configurations to suit the needs of every cyclist Lightweight for a more responsive and agile pedaling Compatible with Hollowgram and Cannondale SL cranksets;

PIRELLI SCORPION ENDURO MIXED PROWALL 29X2.40 TIRE Scorpion™ Enduro M is the most versatile enduro tire nata to accompany you on every type of ride: from training on your local casa trails to race weekend. A tire with consistent performance over tempo and predictable behavior. The SmartGRIP Gravity compound is the racing-ready option in the Scorpion MTB gamma, a formulation derived from decades of know-how in motocross and from the valuable advice of former downhill world champions. The single-compound SmartGRIP Gravity formulation is the answer for all bikers looking for a reliable tire to tackle any type of route in training and racing thanks to the consistency of its performance over tempo and in any type of weather condition. Casing with bead-to-bead protection and a hard rubber insert positioned above the bead for reliability suitable for any aggressive riding style. PIRELLI SCORPION ENDURO MIXED PROWALL 29X2.40 MAIN FEATURES: Ideal for terrain: Rocky, mixed, slippery. Casing: 60 TPI. Bead: Folding. Mounting: Standard with inner tube or Tubeless. Compound: Smartgrip gravity. Technology: ProWALL. Actual weight: 870 g (29 x 2.4). Pressure: 1.5 - 3.0 bar (20 - 45 psi). Tpi: 60. Version: Tubeless ready. Etrto: 60-622. Compound: SmartGrip Gravity. TECHNOLOGIES SmartGrip Gravity compoundThe SmartGRIP Gravity compound is the racing-ready option in the Scorpion MTB gamma, a formulation derived from decades of know-how in motocross and from the valuable advice of former downhill world champions. This is how a softer compound was nata, resistant to tearing, with greater grip in all weather conditions, excellent traction and control at alte speeds with a single-compound formulation. SmartGRIP Gravity is the answer for all bikers looking for a reliable tire to tackle any type of route in training and racing thanks to the consistency of its performance over tempo and in any type of weather condition. Tubeless ReadyTubeless ready tires offer the biker many advantages: the possibility of using lower air pressures, which improve traction; lower rolling resistance compared to a tire with inner tube; a lower chance of puncturing because there is no inner tube. Tubeless ready tires must be mounted on rims compatible with tubeless and require the use of a liquid sealant to maintain pressure. Liquid sealants have the added advantage of sealing small punctures. Be sure to check the sealant regularly and replace it if necessary, because over tempo it dries out. ProWALLProWALL is a sidewall reinforcement technology that improves puncture protection and handling even at low pressures. The additional layer of nylon fabric on the sidewalls of the casing improves not only protection against cuts and pinches but also the stability of the entire structure, allowing better handling and more precise cornering, both essential to improve your off-road riding experience. Il tutto without compromising on weight and smoothness, making ProWALL a perfect solution both for cross-country racing and for aggressive trail riding and enduro when paired with diverse casing structures, respectively 120 tpi and 60 tpi.

Hope Pro 5 Rear Hub 32H 157x12mm Technical Specifications Drilling: 32 holes Disc mounting: 6-bolt system Freehub options: Shimano HG Alloy, Shimano HG Steel, Shimano MicroSpline, XD Main Features Improved sealing to prevent the ingress of dirt and reduce drag New labyrinth seal without friction for exceptional freehub performance New pawl and spring design for greater durability, load capacity and reduced drag Increased engagement from 44 to 108 points with a new 6-offset-pawl system Optimized axle design for a stiffer and more durable freehub New hub body profile for greater stiffness without weight increase Easy maintenance, fully serviceable and rebuildable with basic tools Universal compatibility, available with all modern freehub bodies Versatile adaptability, with interchangeable end spacers for different frame and axle standards

Specialized S194200003 Sidearm turbo levo gen2 Front triangle inner side cable guide kit, for Turbo Levo Gen 2 (2019 - 2021) ITEM CODE: S194200003 Barcode: 888818465040

TANNUS ARMOUR INSERT 20X3.00-4.00 ARMOUR TUBE RIM PROTECTION INSERT - 20" X 3.00"-4.00", CERCHIO INTERNAL MISURA 50-80MM, 20"X2.4"-4.5" INNER TUBE • It is positioned between the inner tube and the tire and combines puncture protection, ease of use and an increase in ride quality• Eliminates most punctures thanks to the reinforced wings and protection under the tread• Up to 15 mm of extra protection under the tread and 2/3 mm on the sides to reduce the number of punctures by about 90%• Provides complete cushioning around the inner tube to prevent pinch flats• Allows you to inflate the tire to lower pressures, thus increasing grip without the annoying burp effect• The insert absorbs a huge amount of vibrations, allowing you to increase the quality and confort of your ride• The rim is always protected during run-flat riding• The correct Armour Tube size is equal to the tire size• Supports the tire sidewall in corners• Better rolling at pressures below 2 Atm• 7,000 Km of durability• Inner tube NON included• Weight: 360 g

HOPE HYDRAULIC HOSE 1M Hydraulic brake hose for Hope. Length 1 meter. ITEM CODE HBSP172

LEFT CRANK ARM SHIMANO 170MM Shimano 170mm crank arm for e-mtb crankset. Designed for the rigors of E-MTB riding, the SHIMANO FC-EM600 crankset integrates in modo cleanly and eliminates the need for spacers. LEFT CRANK ARM SHIMANO 170MM MAIN FEATURES: Aggressive MTB design. 24 mm bottom bracket axle. Crank arm length (mm): 170.

BOTTOMLESS TOKEN ROCK SHOX SOLO AIR DEBON AIR 35MM PIKE LYRIK BOXER These spacers are inserted into the fork to reduce the air volume and thus obtain greater progressiveness towards the end of the travel, adapting the fork in the best possible way to the rider’s riding style or weight. MAIN FEATURES OF BOTTOMLESS TOKEN ROCK SHOX SOLO AIR DEBON AIR 35MM PIKE LYRIK BOXER: Springs: Solo Air, Debon Air. Forks: Pike, Lyrik, Boxxer. Diameter: 35 mm. Price refers to 1 piece. NB: to verify the compatibility of the product, it is necessary to refer to the exploded views and spare part codes provided by the manufacturer. ITEM CODE 11.4018.032.000

INNTECK BLACK BEARING B3 ABEC3 MR18307-2RS 18X30X7 BEARING Replacement bearing for frame/wheels. It is composed of chrome steel balls, a chrome steel cage and 2RS seals resistant to water and dust. INNTECK BLACK BEARING B3 ABEC3 MR18307-2RS 18X30X7 BEARING MAIN FEATURES: Dimensions: 18 x 30 x 7 mm. Ball/Needle Materials: steel. Chrome steel cage. ITEM CODE CCY-1089

bosch RUBBER SPACER 35 MM MOUNT The rubber spacer for 35 mount from bosch is designed to offer strength and durability. Made with high-quality materials, this spacer ensures perfect grip and stability for a 35.0 mm mount, allowing you to tackle your cycling adventures with confidence and safety. bosch RUBBER SPACER 35 MM MOUNT MAIN FEATURES: Made of durable rubber for long life Compatible with 35.0 mm mounts Offers perfect grip and stability during use ITEM CODE 546189053

SHIMANO 126L QUICKLINK CN-HG701 11S CHAIN The HG701-11 chain is directional and features a SIL-TEC treatment on the inner link and the outer link for greater durability. Thanks to its reinforced design, it is compatible with 11-speed road bikes, MTB and E-BIKE. SHIMANO 126L QUICKLINK CN-HG701 11S CHAIN MAIN FEATURES: Smooth and reliable shifting performance. 11-speed directional chain. More efficient, quieter, less maintenance. SIL-TEC surface treatment. Compatible with MTB, Road, 11-speed E-bike. Reinforced chain for E-BIKE. New chain plate size. Weight: 257 g (114 links). Type: HG-X11. Speeds: 11. Number of chain links: 126. ITEM CODE ICNHG70111126Q

TRANZX Replacement cartridge for 100mm dropper seatpost The sealed replacement cartridge for external cable dropper seatpost by Tranz-X is designed to offer reliable and long-lasting performance. Ideal for models 421750512 and 421750532, this cartridge ensures smooth and precise operation of your dropper seatpost, allowing you to tackle your adventures in the saddle with greater safety and comfort. TRANZX Replacement cartridge for 100mm dropper seatpost main features: Sealed replacement cartridge for external cable dropper seatpost Compatible with models 421750512 and 421750532 Ensures smooth and precise operation of the dropper seatpost Designed to offer reliable and long-lasting performance product code: 421759025

CRANK BROTHERS MALLET 2 PEDALS The Mallet 2 pedals by Crankbrothers feature an aluminum platform and forged steel wings, extremely light and durable materials, ideal for MTB riders. They offer a forged chromoly steel axle highly resistant to wear and a stainless steel spring. Release angle from 15 to 20 degrees. KEY FEATURES OF CRANK BROTHERS MALLET 2 PEDALS: Weight: 495g (per pair). Axle: forged chromoly scm435 steel. Platform: two-piece aluminum body. Wings: stamped steel. Spring material: 300 Series stainless steel. Axle: forged chromoly scm435 steel. Inner bearings: bushings. Outer bearings: cartridge. Release angle: 15°/20°. Cleats: high-quality brass. Manufacturer’s warranty: 5 years.

ROCK SHOX VENT VALVE BLEED TOOL REVERB AXS - C1 The ROCK SHOX vent valve tool accessory for Reverb AXS/C1 is the essential accessory to keep your suspension always at peak performance. Designed to offer a flawless riding experience, this tool allows you to precisely adjust the air pressure in your suspension to adapt it to your specific needs. With the vent valve for Reverb AXS/C1, you will be able to tackle any type of terrain with maximum safety and comfort, always ensuring a smooth and controlled ride. ROCK SHOX VENT VALVE BLEED TOOL REVERB AXS - C1 main features: Compatible with Reverb AXS/C1 suspensions for precise adjustment of air pressure Robust and durable design to ensure long-term durability Easy to use and install for a hassle-free experience Increases your suspension performance for smoother and more comfortable riding

Specialized S211600037 Turbo SL M20 Mountain Crankset 170mm L/R Arms Specialized S211600037 Turbo SL M20 Mountain Crankset 170mm L/R Arms Alloy SRAM 11.6118.069.003 SRAM alloy crankset for Turbo SL mountain bikes equipped with SL 1.2 (M20) motor. Complete crankset Length: 170mm Material: alloy BB/spindle interface: SRAM DUB Includes pedal washers. Used on: 2024 LEVO SL COMP ALLOY IN 2024 LEVO SL COMP ALLOY BRA 2024 LEVO SL COMP ALLOY UL 2024 LEVO SL COMP CARBON 2024 LEVO SL COMP CARBON BRA 2024 LEVO SL EXPERT CARBON 2024 LEVO SL EXPERT CARBON BRA 2024 Turbo Kenevo SL 2 Comp 2024 Turbo Kenevo SL 2 Comp 2024 Turbo Kenevo SL 2 Expert 2024 Turbo Kenevo SL 2 Expert 2023 KENEVO SL SW CARBON 29 - WF 2023 LEVO SL COMP CARBON 2023 LEVO SL COMP CARBON BRA 2023 LEVO SL EXPERT CARBON 2023 LEVO SL EXPERT CARBON BRA 2023 Turbo Kenevo SL 2 Comp 2023 Turbo Kenevo SL 2 Expert 2022 LEVO SL SW CARBON - WF

SPECIALIZED STUMPJUMPER DOWN TUBE PROTECTION S184200063 Down tube protection compatible with Stumpjumper carbon from 2018 - 2021. ITEM CODE S184200063

MAGURA MT5 2 DITA BLACK BRAKE LEVER BODY Magura MT5 brake lever body in lightweight aluminum from MY2015. ITEM CODE 484062351

SPECIALIZED S170500004 Battery screw kit for levo/kenevo S170500004 screw kit Battery screw kit Specialized turbo levo 2016-2018 Battery screw kit Specialized Kenevo 2018-2019 ITEM CODE: S170500004 Barcode: S170500004

PIRELLI SCORPION E-MTB S TIRE - 29X2.60 The SCORPION E-MTB S - 29X2.60 tire by Pirelli is designed to tackle the most demanding challenges on the trails. With a high-profile and widely spaced tread, it offers exceptional grip when cornering and powerful braking, making it ideal for loose and soft terrain. This E-MTB-specific tire ensures reliable and safe performance during your mountain bike adventures. main features: High-profile and widely spaced tread for optimal traction Grip in cornering and powerful braking for increased safety Ideal for loose and soft terrain Specific for E-MTB, ensuring reliable performance

CRANK BROTHERS DOUBLE SHOT 1 PEDALS The CRANK BROTHERS DOUBLE SHOT 1 HYBRID PEDALS are designed for those who want to alternate between cleated shoes and flat ones when riding their MTB. This model is extremely powerful and high-performing on both sides, it has a wide, grooved platform and the spring is secure and strong. The pedal rotation is buono, the grip is excellent on randonnées and the pedal is extremely light. MAIN FEATURES OF CRANK BROTHERS DOUBLE SHOT 1 PEDALS: Hybrid pedals Grooved composite platform. Enduro bearings. Release angle: 15/20°. Q-factor: 57 mm. Steel axle: scm 435 forged chromoly. Premium cleats. Weight: 331 g (pair).

MAXXIS MINION DHF 29X2.50 WT E50 E-BIKE DH 60X2TPI TLR 3C MAXXGRIP TIRE The MAXXIS MINION DHF 29X2.50 WT E50 E-BIKE DH 60X2TPI TLR 3C MAXXGRIP TIRE features a tread that perfectly balances speed and traction when cornering and braking. Depending on trail conditions, the DHF is perfect for being mounted on the rear or on the front in combination with the DHR. MAXXIS MINION DHF 29X2.50 WT E50 E-BIKE DH 60X2TPI TLR 3C MAXXGRIP TIRE MAIN FEATURES: 3C Maxxgrip compound. Diameter: 29". Width: 2.50. Weight (approximate): 1493 g. ETRTO: 63-622. Tubeless ready. E50 also recommended for E-Bikes up to 50 km/h. Category: Trail, Enduro, Downhill. Recommended use: all trail conditions. Recommended installation: front. ITEM CODE TB00472800