MTB

REDUCTION BUSHING TUBE SELLA USE EXT.30.9 - INT.27.2 Reduction bushings to adapt the seatpost to your sella tube. External: 30.9 Internal: 27.2

MAXXIS MINION DHF EXO TR 29X2.30 60TPI TIRE The Minion DHF tire by Maxxis was created to race in the NORBA Downhill championship, as it can accompany the rider on every type of trail, even the muddiest or most unstable. The tire features both ramped knobs, ideal for reducing rolling resistance, and knobs with a central channel to increase biting angles, provide straight-line stability and cornering grip. The Minion DHF tire works well both as a rear and as a front, or solo in front when paired with the DHR. The Tubeless Ready system offers setup with or without inner tube, while the Exo sidewall reinforcement ensures protection from abrasions or possible tears. MAXXIS MINION DHF EXO TR 29X2.30 60TPI TIRE MAIN FEATURES: Manufacturer Code: TB96785000 Size: 29x2.30 ETRTO: 55-559 TPI: 27 Weight: 830g Compound: 42a EXO protection Tubeless Ready technology technologies: EXO: extremely cut- and abrasion-resistant material added to the sidewalls of MTB tires. This layer, obtained with an ultra-light dense weave, does not affect the tire’s performance. TR TUBELESS READY: The MAXXIS TR tubeless ready version provides the rider many advantages: the possibility to ride with reduced tire pressure, which greatly improves traction; lower rolling resistance compared to a tire with an inner tube; fewer chances of getting a flat. Maxxis TR tubeless ready tires have the same advantages as UST tubeless tires without being penalized by higher weight. For the TR version a standard casing is used and therefore requires the use of sealant for air retention. Maxxis TR tires are the only tires approved for use with sealants. Maxxis TR tubeless ready tires can also be used on non-Tubeless wheels with the use of an inner tube.

WHITE INDUSTRIES ENO REAR ECCENTRIC DISC 32 holes SINGLE SPEED 135 MM  Rear eccentric hub to convert frames with vertical dropouts in single-speed or fixed-gear, spacing 130 or 135mm WHITE INDUSTRIES ENO REAR ECCENTRIC DISC 32 holes SINGLE SPEED 135 MM main features: Misura from center to flange (right and left): 32mm Flange diameter: 60mm Misura: 135 mm 32 holes

AMFLOW DJI AVINOX M1 FRONT MOTOR MOUNTING SCREW The Amflow DJI Avinox M1 motor mounting screw allows you to mount the DJI Avinox M1 motor on your Amflow e-bike. The screw is available in two versions, both required for installation. The long version is 78 mm and attaches to the front of the motor, while the short version is 69 mm and attaches to the rear of the motor. AMFLOW DJI AVINOX M1 FRONT MOTOR MOUNTING SCREW KEY FEATURES: Amflow DJI Avinox M1 motor mounting screw Mounting screw for DJI Avinox M1 motor Available in 2 versions: 78 mm for the front | 69 mm for the rear Package contents: 1 screw Original Amflow spare part

SPECIALIZED TURBO CREO COMP CARBON BIKE Description Road or gravel? Five kilometers or 5 hours? Uphill or flat? Suffer or enjoy the view? More powerful or lighter? With the Creo 2 you no longer have to choose—you can have it all. It’s more powerful, has more range, is light, and has plenty of space for wide-section tires, and let’s not forget the Future Shock 3.0 device! The best in its category, turning impossible rides into a pleasure. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS POWER: The new TURBO SL 1.2 system is highly efficient and provides a range of up to 190 km. It delivers 33% more power (320 watts) than the previous version, with a very natural pedaling cadence. Torque is 43% higher (50 Nm), and assistance is provided instantly, so you can tackle that steep climb with agility. Noise has been reduced by 40%, making the Creo 2 super quiet. TIRE CLEARANCE: The Creo 2 comes with 700 x 47c tires and has space for tires up to 29" x 2.2. The high-volume tires offer a comfortable and secure ride on the roughest surfaces. FUTURE SHOCK 3.0: The Creo 2 with the Future Shock 3.0 device, offering 20 mm of travel at the handlebar, reduces impacts by 53%. Your hands and handlebar stay steady for smoother riding and greater control. It also reduces fatigue during long days in the saddle. CAPABLE GEOMETRY: The progressive geometry of the Creo 2 lets you tackle anything, from big country roads to more demanding gravel. An ergonomic road endurance position makes you feel good and gives you the strength to pedal all day. DROPPER SEATPOST: With the dropper seatpost you can lower your center of gravity for greater control when needed. LOAD CAPACITY: The Creo 2 can accommodate various types of front, rear, or low-rider racks—or you can mount them all, why not? CONTROL: Our most advanced and intuitive control unit that connects the bike, Turbo OS, the Specialized App, and the rider. With MicroTune it’s very easy to perform fine adjustment of assistance levels in real time, so you can optimize range. MASTERMIND TCU: The MasterMind TCU is the brain of the bike and shows you all the data you need about your activity. It allows you to adjust assistance and can receive over-the-air updates so your Creo gets better over time. It integrates perfectly with the Specialized App. SPECIALIZED APP: With the Specialized App you can customize motor characteristics, record rides, personalize the display, and sync your data with other apps. The Turbo System Auto-Lock will deter thieves. Specifications Wiring Custom Specialized wiring harness w/ charge port Charger Custom charger, 48V System w/ SL system charger plug Battery Specialized SL1-320, fully integrated, 320Wh Electronics Motor New Specialized 1.2 SL Custom Lightweight Motor User Interface/Remote Specialized MasterMind TCU, percentage of remaining charge, 120 possible display configurations, MicroTune assist adjustment, over-the-air updates, ANT+/Bluetooth®, w/Handlebar remote Cockpit Sella Body Geometry Power Sport Stem Future Stem Comp Handlebar Specialized Adventure Gear Hover, 103mm drop x 70mm reach x 12º flare Seatpost Trans-X Dropper, 50mm Travel Cockpit Bar Tape Supacaz Super Sticky Kush Frame Frame FACT 11r carbon, front/rear thru-axles, fully integrated down tube battery, internal cable routing, fender/rack mounts, 12x142mm Fork Future Shock 3.2 w/ Smooth Boot, 12x100mm thru-axle, flat-mount disc Seat Collar Specialized Alloy, 31.8 Brakes Front Brake SRAM Apex eTAP AXS, hydraulic disc Rear Brake SRAM Apex eTAP AXS, hydraulic disc Drivetrain Chainring SRAM X-Sync Eagle, 107 BCD, 44T Rear Derailleur SRAM X1 Eagle AXS Crankset SRAM Alloy DUB Crank Arms Shift Levers SRAM Apex eTap AXS Chain SRAM NX Eagle, 12-Speed Cassette SRAM PG1210, 12-Speed, 11-50t Wheels & tires Front Wheel DT Swiss G540 rim, 24mm internal width, tubeless ready, 24h, Specialized full sealed bearing thru axle hub, centerlock disc, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Rear Wheel DT Swiss G540 rim, 24mm internal width, tubeless ready, 24h, Specialized full sealed bearing thru axle hub, centerlock disc, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Inner Tubes 700x32/50mm, 48mm Presta valve Tyres Front Tire Tracer Pro, 700x42c Rear Tire Tracer Pro, 700x42c Weight 14.55 kg (32 lb, 1.2 oz) *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED

AMS CAMO FORK PROTECTION The MTB fork protection kit from All Mountain Style (AMS) has been designed to protect MTB forks from impacts, scratches and cable rub. Made from a self-adhesive, honeycomb material, the protector is easy to install and ensures maximum protection and incredible long-term durability. AMS CAMO FORK PROTECTION Key features: Protects against cracks or scratches caused by cables. Long-lasting. Designed to be compatible with all forks, ranging from Cross Country to Trail, up to All Mountain and Enduro. Material: 380 micron PVC with a honeycomb structure that offers incredible impact resistance. Featherweight (16 g). Fantastic honeycomb effect that offers strength and style. Easy to install, allows repositioning during installation. Does not yellow over time. AMS FORK PROTECTION INSTALLATION GUIDE:

SRAM CENTERLINE TWO PIECES 160MM CENTERLOCK BRAKE ROTOR The SRAM Centerline two pieces 160mm brake rotor is designed to deliver exceptional performance and reliability on every route. With its innovative design and high-quality construction, this brake rotor is ideal for cycling enthusiasts seeking maximum safety and control while riding. SRAM CENTERLINE TWO PIECES 160MM CENTERLOCK BRAKE ROTOR KEY FEATURES: Centerlock mount Size : 160 mm Rotor thickness 1.85 mm Suitable for use with Sram Guide/Level brakes Weight 160 mm (119 g) ITEM CODE: 00.5018.037.023

MAXXIS DTH TIRE 20X1.75 EXO 120TPI TB00409800 The Maxxis DTH tire is a 20-inch tire with a width of 1.75 inches, designed to offer exceptional durability and optimal traction thanks to 120 TPI technology. Ideal for fast and safe riding. MAXXIS DTH TIRE 20X1.75 EXO 120TPI TB00409800 KEY FEATURES: Size: 20x1.75 inches Technology: 120 TPI for exceptional durability and optimal traction Ideal for fast and safe riding

SPECIALIZED SLAUGHTER GRID 2BLISS READY 27.5-650BX2.6 TIRE Fast tire capable of providing maximum confidence even when taking corners at full speed. The center tread has been kept intentionally low to favor speed, and the nearby rounded knobs allow for secure braking. Tall side knobs offer high cornering grip.The Gripton compound uses “predominantly synthetic rubber reinforced with silicon dioxide,” which reduces the amount of energy lost through hysteresis. This means the tire deforms less easily, accumulates less heat, and is more efficient, with improved wear resistance compared to natural rubber. The Gripton compound is soft and also conforms to rough surfaces. The 56A durometer makes this tire much softer than others; it conforms to surfaces and also filters vibrations, making the ride smoother. KEY FEATURES OF SPECIALIZED SLAUGHTER GRID 2BLISS READY 27.5-650BX2.6: Double-layer casing for durability and sidewall stiffness. 2Bliss Ready (tubeless compatible) construction with reinforced sidewalls. Bead: folding. Compound: Gripton, tread 60a / sidewalls 50a. Weight (approx.): 888 g. Type: folding. TPI: 60. ETRTO: 67-584. Pressure: 1.4 - 2.8 bar (20 - 40 psi). ITEM CODE 00117-6400

SPECIALIZED EPIC S-WORKS 8 BIKE The new Epic 8 is the exaltation of the concept of speed as the sum of the ability to tackle obstacles, efficiency and lightness. Modern XC courses require ever higher performance from bikes, and this is why on the Epic 8 we have further refined and improved the suspension kinematics, managing to offer an even more efficient pedaling. The shocks with custom specs and tuning are able to absorb every impact and make the Epic 8 a wolf in agnello’s clothing. If you are an XC racer and your goal is maximum speed, the Epic 8 is the perfect bike. GREAT CAPABILITY: the 120mm travel and progressive geometry make the Epic 8 extremely capable on technical trails, very fast and efficient uphill and incredibly responsive and snappy in acceleration. The torsional and lateral stiffness also ensures perfect steering precision. WHAT BUMPS?: Compared to the previous model, the Epic 8 absorbs 12% more impact forces and vibrations, so you get less tired and can use your energy better to push harder on the pedals. RIDE DYNAMICS: The Specialized Ride Dynamics Team has developed a custom tuning for the Epic 8 shock, whose characteristics enhance the holistic riding experience. The specific tuning developed together with the leverage ratios and the renewed kinematics exponentially improves handling. BIOMECHANICAL EFFICIENCY: By optimizing the kinematics of the Epic 8, the Specialized Ride Dynamics Team has reduced pedal-induced movement by 20% while keeping the suspensions active for more effective bump management. This way the rider is able to maintain the most efficient pedaling position. The result is the most efficient full-suspension bike we have ever made. MORE WITH LESS: With the Epic 8 we have not added a single gram of weight to improve its features. All models now come with SWAT 4.0 and an integrated steering stop to prevent frame damage in caso of a slide. The new S-Works Epic 8 frame is even 76 grams lighter, despite adding these details. ROCKSHOX FLIGHT ATTENDANT: Free your mind to focus on the race. The Specialized Ride Dynamics RockShox Flight Attendant (on S-Works models), interacting with SRAM AXS Wireless technology, collects real-time data to determine the ideal compression settings and create an unparalleled experience for the rider. SPECIALIZED EPIC S-WORKS 8 BIKE MAIN FEATURES: The most capable 120mm travel bike. 12% more bump absorption, and 20% less bobbing. RockShox SIDLuxe ULTIMATE Ride Dynamics shock and SID ULTIMATE fork with Flight Attendant. Three settings for the shock with dedicated tuning. The Specialized Ride Dynamics RockShox Flight Attendant collects real-time data from the terrain and the rider to determine the ideal compression settings. Robust Roval Control SL wheels. Lightweight integrated Roval Control SL cockpit. Level Ultimate Stealth 4-piston brakes. SRAM XX SL T-Type AXS drivetrain. SWAT 4.0 in the down tube to carry trail essentials. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME FRAME: S-Works FACT 12m Carbon, Progressive XC Race Geometry, Rider-First Engineered™, SWAT downtube storage, threaded BB, 12x148mm UDH compatible rear dropout, internal cable routing, 120mm of travel, Optimized for wireless drivetrain and seatpost. SWAT COMPONENTS: SWAT internal downtube storage. SEAT COLLAR: Specialized Alloy 34.9, Titanium Bolt. SUSPENSIONS FORK: RockShox SID ULTIMATE Flight Attendant, Ride Dynamics developed 3 position, Debon Air, 15x110mm, 44mm offset, 120mm Travel. REAR SHOCK: RockShox SIDLuxe ULTIMATE Flight Attendant, Ride Dynamics developed 3 position, Solo Air, 190x45mm. COCKPIT sella: Body Geometry S-Works Power, carbon fiber rails, carbon fiber base. HANDLEBAR: Roval Control SL Integrated cockpit, 60mm X- 12 degree integrated stem, 8-degree backsweep, 1 degree upsweep, 760mm wide. GRIPS: Specialized Trail Grips. SEATPOST: RockShox Reverb AXS, 30.9mm, S/M: 125, L:150, XL: 170mm. DRIVETRAIN SHIFT LEVERS: SRAM AXS POD Ultimate Controller. CASSETTE: SRAM XX Eagle SL 10-52t. BOTTOM BRACKET: SRAM DUB, BSA 73mm, Threaded. CRANKSET: SRAM XX SL Eagle Power Meter Crankset, 170mm/175mm. CHAIN: SRAM XX SL Eagle. REAR DERAILLEUR: SRAM XX SL Eagle AXS. CHAINRING: Alloy 34T. WHEELS RIMS: Roval Control SL, Carbon offset design, 29mm internal width, 4mm hook width, Tubeless ready, 24h. FRONT HUB: Roval Control SL, DT Swiss Internals, Ceramic Bearings, 6-bolt, 15mm thru-axle, 110mm spacing, Torque caps, 24h straight pull. REAR HUB: Roval Control SL, DT Swiss 180 Internals, DT Swiss Ratchet EXP, Ceramic bearings, 12mm thru-axle, 148mm spacing, 24h straight-pull. FRONT TIRE: Specialized Fast Trak, Control Casing, T7 Compound, 29x2.35. REAR TIRE: Specialized Renegade, Control Casing, T5 Compound, 29x2.35. SPOKES: DT Swiss Aerolite T-head. INNER TUBES: Specialized Turbo Tube. WEIGHT WEIGHT: 10.24kg (22 lb, 9.2 oz). SIZE WEIGHED: MD. *PRO-M STORE OFFERS FREE PRE-ASSEMBLY SERVICE FOR THE BIKE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

MAXXIS MINION DHF WT DD 29X250 120X2 3C MAXXTERRA TB96800600 TIRE The MAXXIS MINION DHF WT DD 29X250 120X2 3C MAXXTERRA TB96800600 TIRE, tubeless ready and with folding bead, is perfect for riding on soft and muddy Enduro/Freeride and Downhill terrain. The ramped knobs minimize rolling resistance while the grooved ones increase grip. The tire offers perfect grip when riding on straight sections and perfect traction when cornering. The double ply casing has been reinforced with a butyl insert for greater strength and high puncture resistance. Compatible with rims with 35 mm internal width. Depending on the condition of the terrain this tire can be mounted either on the front or on the rear wheel: it can be mounted on the front together with the DHR tire on the rear wheel for greater versatility. MAXXIS MINION DHF WT DD 29X250 120X2 3C MAXXTERRA TB96800600 TIRE MAIN FEATURES: DD (double down) structure for greater strength and puncture resistance. Tubeless Ready. Wide Trail (WT) casing compatible with rims with 35 mm internal width. Folding bead. Size: 29x2.50. ETRTO: 63-622. Use: Enduro/DH/Freeride on soft and muddy terrain. TPI: 240 (120x2). ITEM CODE TB96800600

Sella WTB DEVO PICKUP MEDIUM - Cr-Mo, black, HLX The DEVO PICKUP MEDIUM sella offers exceptional comfort and performance for tackling long rides in the mountains or on urban routes. Made with high-quality stainless steel, this sella by Wtb guarantees strength and long-lasting durability. main features: Material: Cr-Mo stainless steel Color: black Type: HLX, ideal for mountain bikes and urban use 142x260mm.

FSA V-DRIVE OS 172LX +/- 6 DEGREES 90 MM STEM The V-DRIVE A9 6° - 90 mm stem by fsa is a concentrate of technology and design to improve the performance of your handlebar. Made with a combination of 3d forging and CNC machining from high-quality AL6061/T6 alloy, this stem offers strength and lightness to tackle any route. The 4-bolt cold-forged aluminum faceplate ensures a secure hold, while the cr-Mo hardware guarantees long-lasting durability. With an angle of ±6° and a handlebar clamp diameter of Ø 31.8 mm, this stem perfectly adapts to the needs of every rider. The matte black anodized finish with black graphics gives it an elegant and aggressive look. With a weight of only 139 g (100 mm), this stem is the ideal choice for those seeking performance and style. FSA V-DRIVE OS 172LX +/- 6 DEGREES 90 MM STEM main features: 3d forged and CNC machined from AL6061/T6 alloy 4-bolt cold-forged aluminum faceplate cr-Mo hardware Steerer clamp height 40 mm Angle: ±6° Handlebar clamp diameter Ø 31.8 mm Finish: Matte black anodized with black graphics Weight: 139 g (100 mm)

SANTA CRUZ HIGHBALL 3 FRAME PROTECTION Frame protection for Santa Cruz Highball 3. ITEM CODE 04-19900

SPECIALIZED BRIDGE COMP SADDLE WITH MIMIC 143 The SELLA SPECIALIZED BRIDGE COMP CON MIMIC 143 is perfect for riding both on the road and off-road. The wide, flat profile allows excellent control and the patented Body Geometry channel promotes blood circulation and prevents numbness. The Mimic technology helps create a saddle that adapts to the shape of the body, to support it in the modo più corretto.Durable tubular Cr-Mo rails and soft padding Level III for unrivalled comfort. MAIN FEATURES OF SPECIALIZED BRIDGE COMP SADDLE WITH MIMIC 143: The Mimic technology allows the use of multi-layer materials that adapt to the anatomy of the persona. Lightweight and durable shell reinforced with carbon fiber. Durable Cr-Mo rails. Body Geometry design, medical test carried out in the laboratory to verify correct blood flow. The base of the sella è compatibile SWAT for integrated solutions to carry the essentials. ITEM CODE 27121-2503

SPECIALIZED PATHFINDER SPORT REFLECT 27.5 650BX2.3 TIRE Gravel riding, that is riding on dirt roads, is as popular in Italy as it is in the American Midwest. The sense of adventure, looking for new challenges or trying a new modo of cycling are what make this stile di vita successful. Doing it with a buona pair of tires can make the difference between having fun or cursing the day when this idea came to you. The Pathfinder tire has the versatility required for adventure, it rolls fast and has excellent traction. SPECIALIZED PATHFINDER SPORT REFLECT 27.5 650BX2.3 TIRE MAIN FEATURES: 60 TPI casing. Steel bead. BlackBelt puncture protection. 650b x 2.3 mm. 35-65 psi. Reflective sidewalls. ITEM CODE 00021-4432

YEP JOYSTICK DROPPER REMOTE COMPLETE ASSEMBLY REMOTE LEVER Remote lever for Yep dropper seatpost including: clamp to be tightened to the handlebar, control lever and adjuster. This ergonomic remote works with most mechanically actuated seatposts on the market. YEP JOYSTICK DROPPER REMOTE COMPLETE ASSEMBLY REMOTE LEVER MAIN FEATURES: Funziona with any mechanically actuated seatpost. Funziona on both ends of the gear cable. Push / pull action - ( thumb / index finger ). Can be positioned anywhere on the handlebar. Pulls up to 8 mm of cable. Impact resistant. NB: PRIMA DI ACQUISTARE IL PRODOTTO VERIFICARE LA COMPATIBILITÀ CON IL PROPRIO REGGISELLA.

AMFLOW CONTROLLER WIRELESS CONTROL UNIT DJI AVINOX LEFT The left wireless controller modulo Amflow control unit allows intuitive control of the riding modes of the DJI Avinox motor on Amflow PL Carbon and PL Carbon Pro. Use the arrow keys to switch between the following five modes: Off: No assistance Auto: Smart adjustment for maximum efficiency (up to 400% assistance) Eco: Economical and gentle for long distances (up to 150% assistance) Trail: Dynamic assistance for technical terrain (up to 600% assistance) Turbo: Maximum power for steep climbs (up to 800% assistance) Features of the left wireless controller modulo Amflow: Left control unit for DJI Avinox M1 motor Includes M3x6 screw and button cell battery Suitable for Amflow PL Carbon and Carbon Pro Wireless control of riding modes via Bluetooth For mounting on the left handlebar

HOPE REAR BRAKE TECH4 V4 BRAIDED LIMITED EDITION The top model in terms of power from HOPE, more is not possible! The new Tech 4 lever has changed a lot, not only in terms of appearance. Hope has also taken a great step forward in terms of technical properties. The expansion reservoir has been enlarged and redesigned. Thanks to the new design, the Tech 4 brake lever can transmit 30% more braking power. For a particularly light lever feel, the spring speed has been reduced and a guide is used for the brake piston. The ease of movement is supported by an industrial ball bearing at the pivot point. The brake lever has been made longer for better modulation and greater control. As before, the lever width and bite point can be adjusted without tools. The two-piece clamp for fastening to the handlebar simplifies installation, since for installation it is non necessary to remove anything from the handlebar. The V4 caliper is very rigid and with large cooling fins. High braking performance, excellent modulation and thermal sizing, which reliably stop even the heaviest riders on the toughest terrain.The calipers, as usual machined from T6 2014 aluminum, are the result of development work with COSMOSWorks FEA (Finite Element Analysis). This makes it possible to reduce weight, improve aesthetics and create the ideal partner for the Tech lever. The sealed bleed nipples allow easier maintenance and the extended fluid outlet simplifies the hose routing. The brake pads can be easily removed upwards and make it unnecessary to remove the wheel during replacement. The unico strength of this huge brake caliper is the large internal width, which allows the use of ventilated brake rotors! HOPE REAR BRAKE TECH4 V4 BRAIDED LIMITED EDITION KEY FEATURES: - Recommended for E-Bike, AM, Enduro, Downhill, Freeride use- New Tech 4 master cylinder, larger expansion reservoir and new lever ergonomics- Tool-free reach adjustment- Two-piece clamp, does not require the removal of any component from the handlebar- High-performance V4 caliper, pads that can be easily removed from the top. Large internal width, which allows optimal ventilation- Lever in T6 aluminum- Braided aluminum brake hose- Includes brake pads specific for E-bikes and organic pads for all conditions- Hose length: 1650mm- Weight 355g N.B: Rotor and adapter not included

Santacruz Blur 1.0 Derailleur Hanger Derailleur hanger by santa cruz for Blur 1.0 model

SPECIALIZED RENEGADE 2 BLISS READY 29X2.3 TIRE The SPECIALIZED RENEGADE 2 BLISS READY 29X2.3 TIRE, light and fast-rolling, is perfect for XC/Cross Country use. The tread, quasi completely uniform, in addition to being very fast-rolling, guarantees excellent grip on descents and in corners. The Control casing protects against punctures. Can be mounted in standard or tubeless configuration. MAIN FEATURES OF THE SPECIALIZED RENEGADE 2 BLISS READY 29X2.3 TIRE: Size: 29 x 2.3. Casing: 60 TPI. ETRTO: 58-622. Folding tire. Can be mounted in standard configuration with inner tube or Tubeless. Pressure: 25 - 50 psi. Compound: Gripton. Use: XC/Cross Country. ITEM CODE 00120-6202

Sella PROXIM NEMBO 135 - T2.0, black The sella PROXIM NEMBO 135 - T2.0, black is designed for gravity disciplines, from All-mountain and Enduro to Downhill. With a flat forma and suitable for both men and women, it offers optimal comfort and performance to tackle the most demanding descents. Sella PROXIM NEMBO 135 - T2.0, black main features: Forma sella: Flat Unisex Rail: T2.0 (7 mm) Misura: 245x135 mm

CONTINENTAL CROSS KING 2.2 PROTECTION 29X2.2 BLACK TYRE An all-rounder primo della classe, tested also in competitions. The Cross KING 2.2 Protection is a versatile tyre suitable both for racing and for trail riding, ensuring stability in corners and comfort. With a buona grip and available with various technologies, this fast-rolling tyre has a tread that adapts to any type of terrain. Tread-Sidewall in black/transparent Skin, foldable. Designed with ProTection technology, this tyre weighs 670 grams, is produced in Germany and has a BC compound/valve. CONTINENTAL CROSS KING 2.2 PROTECTION 29X2.2 BLACK TYRE main features: Versatile tyre suitable for racing and trail, stabile in corners and comfortable Buona grip and available with various technologies Tread that adapts to any terrain Tread-Sidewall in black/transparent Skin, foldable Integrated ProTection technology Weight: 670 grams Produced in Germany Compound/valve: BC