MTB bike

MONDRAKER LEVEL R BIKE 2026 NEW LEVEL: RAISE YOUR LEVEL Discover the third generation of Level with Bosch CX Gen5 and 800Wh battery The long-awaited third generation of Mondraker Level has arrived: our most advanced and successful full power enduro model, with 180/170 mm travel, Bosch CX (Gen 5) motor with up to 100 Nm of maximum torque and removable 800 Wh battery, with the option of adding a 250 Wh range extender. All in a mullet configuration, to maximise performance and fun on our most aggressive e-bike. It doesn’t matter what level you are at. What matters is what you can conquer. Since it arrived on the market 6 years ago, the Level has become a benchmark in Mondraker’s enduro e-MTB segment. It is the perfect choice for those who want to rack up as many descents as possible in a single day without worrying about elevation gain, or for those who accept no compromises when it comes to tackling the most technical trails. Level is not designed only for riders who already know and love the previous versions, but also for those who experience enduro with an even more radical spirit. Power, travel and range are the trump cards of a bike that helps you improve your skills and dominate the most demanding routes. With the new Level, everything becomes easier. Next Level: continuous evolution The evolution of the Level follows in the footsteps of the recent Crafty Carbon, introducing the new Updated Zero Suspension system, which improves its sensitivity and efficiency. Updated Forward geometry with 5 available sizes, two geometry options selectable via flip chip and chainstay lengths tailored to each size. The Level 2026 is destined to become the favourite full power enduro e-bike for those seeking performance and control. With refined suspension, the efficiency of the Bosch motor, a range that can reach up to 1050 Wh with a range extender and the new mullet setup, it is a bike that will make you feel more skilled and confident. Next Level. Level evolves in sizes and geometry The new Level is now available in five sizes, with the introduction of the new ML size. The Forward Geometry has been optimised in combination with two chainstay lengths: 445 mm for sizes S, M and ML, and 455 mm for sizes L and XL. In the previous model, the chainstay length was fixed at 455 mm on all four available sizes. The new Level thus becomes the second model, after the Crafty Carbon, to offer rear stays adapted to each size, with the aim of ensuring the same riding feel regardless of the rider’s height. Compared to the previous version, the new Level adopts a 64° head angle, one degree slacker for increased stability. It also includes a flip chip on the lower shock mount, with two positions: Standard and Low. In the Low position you can lower the bottom bracket by 5 mm and modify both the head angle and the seat tube angle by -0.35°. The new Level introduces the updated version of the Zero system, which makes the rear suspension more sensitive at the start of the travel, more effective on big impacts and with greater traction on climbs. This evolution has made it possible to design a more compact rear end, with the shock positioned lower and more inclined, thus increasing stiffness and improving the bike’s centre of gravity. The latest Bosch CX version (updatable) The new Level is equipped with the Bosch Performance CX Gen 5 motor: a version with a more compact and refined design, with a weight reduction of around 100 grams and a smaller overall size compared to the previous model. This fifth generation of Bosch CX includes the latest software version, available over-the-air from 1 July 2025. The update increases the maximum power from 600W / 85Nm to 750W / 100Nm, and pedal assist reaches up to 400%. Another major new feature is the eMTB+ mode, which allows you to use the motor’s full power (750W and 100Nm) with a more energetic response than in eMTB mode, while maintaining controlled output as in Race and Turbo modes. Kiox 400 display integrated in the frame One of the most interesting elements of the new Level is the integration of the Kiox 400 display into the top tube (RR and XR versions). Protected from the elements and always easily readable at a glance, the colour TFT screen automatically adjusts brightness according to ambient light. The display is dynamic: uphill it shows up to 6 data fields to analyse every aspect of your pedalling, while downhill it shows only speed in large format to keep your focus on the trail. It also includes a 10W USB-C port, useful for charging devices. Like the entire Bosch ecosystem, it is fully customisable via the eBike Flow app. On the Level R we instead find the System Controller integrated into the top tube and the Purion 400 display on the handlebar. Removable 800Wh batteries and 250Wh Powermore The entire Level range is equipped with the new Bosch 800Wh batteries, with high energy density 21700 cells: lighter, more compact and with greater efficiency of use compared to previous generations. The combination of new software, optimised electronics and these batteries allows a significant improvement in range and overall performance. The weight of the battery-motor system is about 500g lower than the previous setup with a 750Wh battery. All Level models are compatible with the 250Wh Powermore range extender, easy to mount in the main bottle cage or carry in a backpack. It weighs only 1.5 kg and adds an extra energy reserve for your longer adventures. Level R – Take your enduro to the next level The most accessible model in the range is designed to improve your enduro performance. Equipped with the fifth generation of the Bosch CX motor, updated to 750W and 100Nm, it combines a removable 800Wh battery with a carbon cover located under the down tube. The setup includes a RockShox ZEB RC fork, SRAM Maven Bronze brakes and SRAM 90 Eagle T-Type drivetrain with 10-52 cassette and 34-tooth chainring. The tyres are Maxxis Assegai 29x2.6” at the front and Maxxis Minion DHR II 27.5x2.6” at the rear. ONOFF: the perfect touch for the Level All models in the range are completed with ONOFF components, updated with the S6 and S9 series for both stems and handlebars. The XR model is fitted with an 800 mm carbon handlebar. The ONOFF Desert Pro grips have increased thickness for sizes L and XL. The Pija dropper seatpost is present on all builds, with travel varying between 140 and 210 mm depending on size. Level: the most loved enduro e-bike of 2026 As Miguel Pina, CEO of Mondraker, says: “After the Crafty Carbon, the Level is our most loved full power eMTB. This new evolution integrates the Updated Zero Suspension System, the Bosch CX Gen5 updated to 750W and 100Nm and the removable 800Wh battery. With the same 180/170mm travel and a new mullet setup, the new Level is more agile, lighter and more capable than ever. It will be the enduro bike of 2026 for anyone who wants to raise their level.” MONDRAKER LEVEL R BIKE 2026 KEY FEATURES: Stealth aluminium frame Bosch Performance Line CX (BDU384Y) Smart System motor and battery with PT 800Wh battery, extendable with optional 250Wh Powermore RockShox ZEB Select Charger RC fork, 180mm RockShox Vivid Coil Base rear shock e*Thirteen Grappler Core wheels SRAM Maven Bronze brakes Race Face Aeffect crankset, 160mm SRAM 90 Eagle T-Type rear derailleur THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Level 6061 Alloy Stealth Evo, updated Zero suspension system, mullet configuration, 170mm travel, Forward Geometry, removable internal battery, Boost 12x148mm rear axle, UDH, tapered head tube, one-piece Monoblock upper link, internal HHG cable routing, sealed MAX bearings, 17mm oversize axles, exclusive plastic motor covers Sizes: S (380mm), M (410mm), ML (435mm), L (460mm), XL (490mm) Shock: RockShox Vivid Coil base, 205x65mm, adjustments: end-stroke, low-speed rebound, spring preload. Upper trunnion mount, lower bushings 30x8mm Shock settings: Compression C26, rebound R23. Springs: S 350 lbs, M 400 lbs, ML 450 lbs, L 500 lbs, XL 500 lbs Fork: RockShox ZEB Select Charger RC 29, 180mm travel, e-bike approved, tapered steerer, Boost 15x110mm axle, 44mm offset, adjustments: low-speed compression and rebound, aria preload Headset: Onoff ZS44/ZS56, 1-1/8” - 1.5”, sealed ACB bearings Stem: Onoff S3 30mm, 0° rise, forged 6061 aluminium, 31.8mm diameter Handlebar: Onoff S3 1.0 in 6061 aluminium, 25mm rise (38mm for L and XL sizes), 800mm width, 8° backsweep, 5° upsweep, 31.8mm diameter Grips: Onoff Desert Pro, CNC lock-on, 135mm length, L and XL sizes with increased thickness Dropper seatpost: Onoff Pija internal, 31.6mm diameter, 1X remote with bearing. Travel varies according to size: S: 140-115mm (388-235mm) M: 160-135mm (428-255mm) ML: 180-155mm (468-275mm) L and XL: 210-185mm (528-305mm) Saddle: Fizik Terra Aidon X5, 145mm width Front brake: Sram Maven Bronze, 4-piston caliper with 18 and 19.5mm pistons, HS2 220mm rotor, IS 6-bolt mount, sintered metal pads with steel backing plate Rear brake: Sram Maven Bronze, 4-piston caliper with 18 and 19.5mm pistons, HS2 200mm rotor, IS 6-bolt mount, sintered metal pads with steel backing plate Brake levers: Sram Maven Bronze, SwingLink technology, pivot bushings, tool-free lever reach adjustment Rims: e*thirteen Grappler Core, welded 6066 hookless aluminium, 30mm internal width, tubeless ready, 28 spokes front (29"), 27.5" rear Spokes: e*thirteen custom J-bend, triple-butted steel, aluminium nipples with washers Front hub: e*thirteen Boost 15x110mm, fully machined aluminium, triple seal, IS 6-bolt mount Rear hub: e*thirteen Boost 12x148mm, fully machined aluminium, triple seal, 6° engagement, HG freehub body, IS 6-bolt mount Front tyre: Maxxis Assegai 29x2.6WT, tubeless ready, 3C Maxx Grip compound, DD protection, 120x2TPI casing, folding bead Rear tyre: Maxxis Minion DHR II 27.5x2.6WT, tubeless ready, 3C MaxxTerra compound, DD protection, 120x2TPI casing, folding bead Crankset: Race Face Aeffect e-bike specific, 160mm length for all sizes Chainring: Sram X-Sync 2 Eagle 34T T-Type, steel, narrow-wide, 104 BCD CL55 mount Chain: Sram 70 Eagle T-Type, 12-speed, Powerlock Rear derailleur: Sram 90 Eagle T-Type, 12-speed Shifters: Sram 90 Eagle, 12-speed, T-Type actuation, single click Cassette: Sram XS-1270, 10-52T, T-Type, 12-speed Motor: Bosch Performance Line CX Smart System (BDU384Y), 25 km/h Battery: Bosch Powertube 800Wh Display: Purion 400 / Bosch Mini Remote / Bosch System Controller *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, GEARS AND BRAKES ARE ALREADY MOUNTED

SPECIALIZED TURBO LEVO 4 PRO BIKE Levo 4: E-MTB with SuperNatural assistance and maximum range. Turbo Levo 4, Where Super Meets Natural SuperNatural power, handling and range The Specialized Science Club presents the Levo 4, an electric mountain bike so advanced it turns you into a pedaling cyborg. Together you become a supernatural force capable of conquering any off-road terrain. The Levo 4’s pedal assistance, traction, control and range are your new super powers. Levo 4, Where Super Meets Natural. SPECIALIZED TURBO LEVO 4 PRO BIKE MAIN FEATURES: Use: Full Power E-MTB, trail. E-System: Specialized 3.1 motor with 666 W and 101 Nm, 840 Wh battery, up to 5.33 hours of range. Frame: FACT 11m carbon, adjustable geometry and SWAT compartment. Suspension: Front: FOX 38 FACTORY GRIPX2 160 mm. Rear: GENIE - FOX FLOAT X Factory 150 mm. Drivetrain: SRAM X0 Eagle T-Type AXS. Wheels: Roval Traverse HD carbon / DT 350. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Electronics UI/Remote: New MasterMind T3 Display System, 2.2" high-resolution color screen, fully customizable via Specialized app Motor: New Specialized 3.1, 101 Nm of torque, 666 W power Charger: Specialized 4 Amp battery charger Battery: 840 Wh battery Frame and Suspension Frame: New Levo 4 frame in FACT 11m carbon, rear triangle in carbon, 12x148 mm rear thru-axle, sealed cartridge bearings, SRAM UDH compatible, SWAT storage compartment, 150 mm rear travel, compatible with forks up to 180 mm Fork: FOX FLOAT 38 Factory, GRIP X2, HS/LS rebound and compression adjustments, 15x110 mm axle, 44 mm offset, 160 mm travel Rear shock: FOX FLOAT X Factory with Specialized GENIE Shock technology, Ride Dynamics Trail Tune, 2-position lever, LSR adjustment, size 210x55 mm Seat collar: Alloy, 38.6 mm Brakes Front brake: SRAM Maven Silver, 4-piston caliper, hydraulic disc, 220 mm HS2 rotor Rear brake: SRAM Maven Silver, 4-piston caliper, hydraulic disc, 200 mm HS2 rotor Drivetrain Shifters: SRAM AXS POD controller Crankset: SRAM XO alloy, 155 mm, ISIS interface Chainring: SRAM 34T T-Type chainring, 104 BCD, steel Chain: SRAM X0 Rear derailleur: SRAM X0 Eagle Transmission Cassette: SRAM XO 1295, 12-speed, 10-52 Wheels and Tires Front wheel: Roval Traverse HD 29", hookless carbon, 30 mm internal width, tubeless ready, DT Swiss 350 hub, 15x110 mm, 28 spokes Rear wheel: Roval Traverse HD 27.5", hookless carbon, 30 mm internal width, tubeless ready, DT Swiss 350 hub, 12x148 mm, 32 spokes Front tire: Butcher, GRID GRAVITY casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3" Rear tire: Butcher, GRID GRAVITY casing, GRIPTON® T9 compound, 2Bliss Ready, 27.5x2.3" Inner tubes: Standard, Presta valve Cockpit Seatpost: Bike Yoke Revive Max 3.0, 34.9 mm S2: 125 mm, S3: 160 mm, S4: 185 mm, S5/S6: 213 mm Sella: Bridge Mimic Expert, Hollow Ti rails Grips: Deity Lockjaw Handlebar: RaceFace Era Carbon, rise bar, 5° upsweep, 8° backsweep, S2: 20 mm rise, S3–S6: 40 mm rise, 800 mm width Stem: Industry 9 Mountain, 35 mm clamp, 40 mm length Accessori SWAT: Internal storage compartment in the down tube Weight: 23.94 kg (52 lb, 12.5 oz) Size weighed: S4 *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED

MONDRAKER F-PODIUM R 2025 BIKE DescriptionThe Mondraker F-Podium R 2025 is a full suspension mountain bike for cross-country that combines an ultra-light carbon frame, advanced suspensions and high-quality components. Designed to excel in XCO competitions, it offers precision, control and speed on the most demanding terrains. Technical Specifications Frame Material: F-Podium 29 Stealth Air Full Carbon Suspension: Zero Suspension System optimized for XCO, 110 mm travel Geometry: XC Forward Geometry Additional Features: BSA bottom bracket, tapered head tube, internal HHG cable routing, dedicated 1X drivetrain design, rear Boost 12x148 mm axle, Post Mount brake mount Available Sizes S: 410 mm M: 440 mm L: 470 mm XL: 500 mm Suspensions Rear Shock Model: RockShox SID Luxe 3P Remote in Pull DebonAir, 165x45 mm Adjustments: 3-position remote Low-speed rebound Air preload Mount: Upper Trunnion, lower bushings 30x8 mm Fork Model: RockShox SID Base 3P Remote, 120 mm Features: 35 mm aluminum stanchions Boost 15x110 mm axle 3-position remote 44 mm offset Components Headset Model: Custom Acros IS52/ZS56 Features: Sealed bearings, internal cable routing Handlebar and Stem Handlebar: ONOFF S3 6061, 5 mm rise, 760 mm width Stem: ONOFF S3 6061 T6 alloy, -7º rise, length varies depending on size Brakes Front and Rear Model: SRAM Level Bronze 4P Stealth Features: Front rotor 180 mm, rear 160 mm Levers with tool-free reach adjustment Wheels and Tyres Rims Model: Mavic CrossMax 29, 25 mm internal width, tubeless ready Tyres Front and Rear: Maxxis Rekon Race 29x2.35, EXO protection, tubeless ready Drivetrain Crankset and Cranks Model: SRAM 1000 Eagle Boost, 34T, length varies according to size Bottom Bracket: SRAM DUB BSA, 73 mm Derailleur and Shifters Rear Derailleur: SRAM S1000 Eagle AXS T-Type, 12-speed Shifters: SRAM Eagle AXS Pod MMX Cassette and Chain Cassette: SRAM XS-1270, 10-52T Chain: SRAM GX Eagle T-Type Weight Weight without pedals: 12.2 kg High Performance and Advanced TechnologyThe F-Podium R 2025 offers a superior riding experience, thanks to a mix of lightness, robustness and innovative technologies. Ideal for competitions or training on technical XC routes.

CERVELO ZFS-5 120 XO AXS BIKE GET READY TO GET IN SELLA Modern and snappy, the ZFS-5 was built for today’s ever-evolving XCO courses: it has to pedal well and be easy to handle, but it also has to be able to tackle every technical section and the difficulties scattered along the circuit. The 67.8 head tube angle of the ZFS-5 offers the precision needed for elbow-to-elbow sprints and the confidence to let off the brakes when the descents become steep. And in the 120 mm build, the 66.6° head angle will give you the confidence you need to push harder and ride faster, even when the track becomes a bit... hellish. Flat handlebar, suspension... but is it a Cervélo? The World Cup season has started and we are there too. The ZHT-5 and the ZFS-5, hardtail and full-suspended respectively, made their debut at the Nove Mesto World Cup round. The riders? World Cup veteran and former Dutch XCO national champion Milan Vader and reigning cyclocross world champion Fem van Empel. TECHNICAL SPECIFICATIONS Sizes SM, MD, LG, XL Fork Fox Performance Elite 34 Step-cast, FLOAT EVOL air spring, Fit 4 3-position crown-adjusted damper, tapered steerer, 15x110mm, Kabolt axle, 44mm offset, 120mm travel Headset FSA IS2 1-1/2 x 1-1/2 Stem Race Face Aeffect R Alloy, 35mm clamp, 0 degree Handlebar Race Face Next R Carbon, 35mm clamp, 780mm width, 20mm rise Seatpost SRAM Reverb AXS 30.9 Saddle Prologo Dimension NDR T4.0 Shifters SRAM AXS Rocker Brake calipers SRAM Level Silver 4 Piston Brake levers SRAM Level Silver Stealth 4 Piston Brake rotor SRAM Centerline Centerlock Rear derailleur SRAM X0 Eagle AXS, 12 speed Cassette SRAM X0 Eagle, 10-52, 12 speed Chain SRAM X0, 12 speed Crankset SRAM X0 Eagle, 32T, Boost 148 DUB Bottom bracket SRAM DUB, BSA 73mm Wheels Rear: Reserve 28 XC, 28mm IW, DT Swiss 350,12x148mm, XD freehub, 24H, centerlock, tubeless compatible Front: Reserve 28 XC, 28mm IW, DT Swiss 350, 15x110mm, 24H, centerlock, tubeless compatible Thru-axle Cervelo Thru-axle, 12x148 Tyres Maxxis Rekon, EXO 60 TPI, 29x2.4 Maximum tyre width (effective) 60mm (2.4") Shock Fox Performance Elite FLOAT, 2 position damper, 190mm x 45mm

MONDRAKER CHRONO CARBON DC R BIKE 2024 The brand new MONDRAKER CHRONO CARBON DC R is the ideal choice for riders looking for top-level performance and unparalleled style. With its aerodynamic design and high-quality carbon construction, this racing bike will lead you to new victories with style and comfort. MONDRAKER CHRONO CARBON DC R BIKE 2024 KEY FEATURES High-performance carbon frame for maximum lightness and stiffness Aerodynamic design to maximize speed and efficiency High-quality components for reliable and long-lasting performance THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Chrono 29 Stealth full Carbon, Forward Geometry XC, BSA bottom bracket 73 mm, tapered head tube, internal cable routing system HHG, Boost 12x148 mm rear axle, dedicated 1x drivetrain design, compatible with Flat Mount brake, Sizes: S: 395 mm / M: 430 mm / L: 470 mm / XL: 520 mm Fork: fox 32 29 Float GRIP EVOL rhythm, 120 mm, tapered steerer tube, Boost 15x110 mm axle, 44 mm offset. Settings: 2-position remote (push to unlock), low-speed rebound, air preload Fork remote: fox Single Pull Headset: ONOFF internal head tube IS52 1-1/2, sealed ACB bearings, upper 51.8x40 45°x45°, lower 51.8x40 36°x45° Stem: MDK, 6061 T6 alloy, 31.8 mm bar bore, rise: +/-5°, length: size S: 50 mm, size M: 50 mm, size L: 60 mm, size XL: 70 mm Handlebar: ONOFF Sulphur 0.2, double-butted 6061 alloy, rise: 4.8 mm, width: 760 mm, backsweep angle 9°, upsweep angle 0°, 31.8 mm bar bore Grips: ONOFF Twin, 1 lock-on, 135 mm Seatpost: Internal telescopic ONOFF Pija, diameter 31.6 mm, Universar lever, size S: 405x95-125 mm, size M: 458x120-150 mm, size L: 498x140-170 mm, size XL: 498x140-170 mm sella: Mondraker MDK Series, SRX, steel rails Front brake: sram level T, 2-piece caliper, one-piece Centerline 180 mm brake disc with 6 IS bolts, organic pads with steel backing plate Rear brake: sram level T, 2-piece caliper, one-piece Centerline 160 mm brake disc with 6 IS bolts, organic pads with steel backing plate Brake levers: sram level T, Direct Link actuation, tool-adjustable reach, lever pivot bushings Rims: mavic CrossMax 29, 25 mm internal width, welded rim, hookless, tubeless ready, 24 spokes Spokes: mavic Straight Pull double-butted, contactless lacing Front hub axle: mavic, Boost 15x110 mm, 6 IS bolts Rear hub axle: mavic, Boost 12x148 mm, ID360 ratchet system, 6 IS bolts, HG freehub Front tyre: maxxis Ardent 29x2.40, Dual compound, EXO, tubeless ready, 60 TPI, folding bead Rear tyre: maxxis Ardent 29x2.40, Dual compound, EXO, tubeless ready, 60 TPI, folding bead Crankset: sram NX Eagle, 12s, Boost, DUB axle, direct-mount chainring, size S: 170 mm size M: 175 mm size L: 175 mm size XL: 175 mm, CL 55 Chainring: 34T, steel, X-Sync 2 Bottom bracket: sram DUB BSA, sealed bearings, 73 mm Chain: sram SX Eagle, 12s, Powerlock Rear derailleur: sram GX Eagle, Roller Bearing Clutch type 3 technology, cage lock, 1x12s, X-Actuation 1:1 Shifters: sram NX Eagle shifter, 12s, X-Actuation 1:1 Cassette: sram PG-1230, 11-50T, 12s Derailleur hanger: sram UDH Weight without pedals: 12.1 kg *PRO-M STORE OFFERS A FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED ITEM CODE: 010.24037 (Size S; Color: nimbus grey)

SPECIALIZED EPIC 8 EXPERT 2026 BIKE The new Epic 8 is the exaltation of the concept of speed as somma of the ability to tackle obstacles, efficiency and lightness. Modern XC courses demand ever higher performance from bikes, and this is why on the Epic 8 we have further refined and perfected the suspension kinematics, managing to offer an even more efficient pedalling. The shocks with custom-specific settings are able to absorb every impact and make the Epic 8 a wolf in sheep’s clothing. If you are an XC racer and your goal is maximum speed, the Epic 8 is the perfect bike.GREAT CAPABILITY: the 120mm travel and progressive geometry make the Epic 8 extremely capable on technical trails, very fast and efficient on climbs, and incredibly responsive and snappy under acceleration. Torsional and lateral stiffness also ensure perfect steering precision.WHAT IMPACTS?: Compared to the previous model, the Epic 8 absorbs 12% more impact forces and vibrations, in modo that you get less fatigued and can use your energy better to push the pedals to the maximum.RIDE DYNAMICS: The Specialized Ride Dynamics Team has developed a custom tune for the Epic 8 shock, whose characteristics enhance the holistic riding experience. The specific tune developed together with the leverage ratios and the renewed kinematics exponentially improve the ride.BIOMECHANICAL EFFICIENCY: By optimizing the Epic 8’s kinematics, the Specialized Ride Dynamics Team has reduced pedal-induced movement by 20% while keeping the suspension active for more effective impact management. This allows the rider to maintain the most efficient pedalling position. The result is the most efficient full-suspension bike we have ever made.MORE WITH LESS: With the Epic 8 we have not added a single gram of weight to improve its features. All models now include SWAT 4.0 and an integrated steering-stop to prevent frame damage in caso of a slide. SPECIALIZED EPIC 8 EXPERT 2026 BIKE MAIN FEATURES: The most capable bike with 120mm of travel. 12% greater impact absorption, and 20% less bobbing. RockShox SIDLuxe Select+ shock developed together with Ride Dynamics and SID Select+ fork Three settings for the shock with dedicated tuning. Roval Control SL V carbon wheels, perfect on race courses as well as for your weekend ride. SRAM Motive Bronze 4-piston brakes GX Eagle AXS drivetrain SWAT 4.0 storage compartment in the downtube THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame Frame FACT 11m Carbon, Progressive XC Race Geometry, Rider-First Engineered™, SWAT downtube storage, threaded BB, 12x148mm UDH compatible rear dropout, internal cable routing, 120mm of travel Seatpost clamp Specialized Alloy 34.9, Steel Bolt SWAT SWAT internal downtube storage Suspension Rear shock RockShox SIDLuxe Select+, Ride Dynamics developed 3 position, TwistLoc remote adjust, Solo Air, 190x45mm Fork RockShox SID Select+, Ride Dynamics developed 3 position, Debon Air, 15x110mm, 44mm offset, 120mm Travel Brakes Front brake SRAM Motive Bronze, 4-piston caliper, hydraulic disc, 180mm rotor Rear brake SRAM Motive Bronze, 4-piston caliper, hydraulic disc, 160mm rotor Drivetrain Shifters SRAM AXS POD Controller Rear derailleur SRAM GX Eagle AXS Transmission Cassette SRAM XG-1275 T-Type 12-Speed 10-52 Chain SRAM GX Eagle Transmission 12-Speed Flattop Chain Crankset SRAM GX Eagle, DUB, 165/170/175mm Chainring 34T Bottom bracket SRAM DUB Threaded Wide Wheels Front tire Specialized Fast Trak, Flex Lite Casing, T5/T7 Compound, 29x2.35 Front wheel Roval Control SL V, Hookless carbon, 29mm inner width, tubeless ready, DT Swiss 370 hub, Sapim D-Light Straight Pull Rear tire Specialized Air Trak, Flex Lite Casing, T5/T7 Compound, 29x2.35 Rear wheel Roval Control SL V, Hookless carbon, 29mm inner width, tubeless ready, DT Swiss 370 hub, Sapim D-Light Straight Pull Inner tubes Specialized Turbo Tube COCKPIT Stem Specialized XC, 3D-forged alloy, 4-bolt, 6-degree rise Handlebar Specialized Alloy Minirise, 10mm rise, 750mm, 31.8mm clamp Saddle Body Geometry Power Sport, steel rails Cockpit Grips SRAM Slip on with Twist-Loc Seatpost X-Fusion Manic, 30.9, 125/150/170 Travel, 0mm offset Product details Identifier 221521 Weight Weight 11.15 kg (24 lb, 9.3 oz) Measured size MD *Weights based on painted production frames as shown. Actual weights will vary according to color, frame size, and component variation. Specifications are subject to change without notice. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

MONDRAKER FOXY 2024 BIKE With its 6061 STEALTH EVO aluminum frame, you can enjoy the same famous technologies featured on the other FOXY models, such as FORWARD GEOMETRY or the ZERO SUSPENSION SYSTEM. The bike is equipped with components you can’t go wrong with, featuring Fox suspension, SRAM SX Eagle drivetrain, e*thirteen LG1 Plus Enduro wheels, SRAM G2 R brakes and ONOFF components. Suspension travel is 160 mm at the front and 150 mm at the rear. MONDRAKER FOXY 2024 BIKE MAIN FEATURES: 29” wheels. Zero system suspension. Forward geometry. Stealth alloy. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Foxy 29 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 150mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148mm rear axle, tapered head tube, 73mm BSA bottom bracket, dedicated 1x drivetrain design, telescopic seatpost internal routing, MAX capacity sealed bearings, ISCG 05 Sizes: S: 380mm / M: 420mm / L: 470mm / XL: 510mm Shock: Fox Float EVOL Performance, 205x65mm. Settings: 2-position compression (Open/Firm), rebound, air preload. Trunnion top mount, 25x8mm bottom bushings Shock adjustment: Light compression, light rebound, air volume spacer 0.6 Fork: Fox 36 29 Float Rhythm, 160mm, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: sweep adjust compression, low-speed rebound, air preload Headset: Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º Stem: Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8mm barbore Handlebar: Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm barbore Grips: Onoff Twin, 1lock-on, 135mm Seatpost: Onoff Pija dropper internal, diameter 31.6mm, 1X Remote lever with bearing, S size: 405x95-125mm, M size: 458x120-150mm, L size: 498x140-170mm, XL size: 558x170-200mm Saddle: SDG BEL-AIR 3.0, LPU foam, steel rails Front brake: Sram G2 R, 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed organic pads Rear brake: Sram G2 R, 4-piston caliper, Centerline 180mm IS 6 bolts one-piece rotor, steel-backed organic pads Brake levers: Sram G2 R, tool-free reach adjust, lever pivot bushings Rims: e*thirteen LG1 Enduro, IW30 Hookless, 6069 Welded Aluminum, 30mm internal width, tubeless ready, 28 spokes Spokes: e*thirteen custom Hive triple-butted black steel, alloy nipples, nipple washers Front hub: e*thirteen Boost 15x110mm, triple-sealed, fully machined aluminum, IS 6 bolts Rear hub: e*thirteen Boost 12x148mm, triple-sealed, fully machined aluminum w/6-degree engagement, IS 6 bolts, HG freehub Front tire: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead Rear tire: Maxxis Aggressor 29x2.3, tubeless ready, dual compound, Exo protection, 60TPI, folding bead Crankset: Sram SX Eagle, Boost, DUB axle, Direct Mount chain ring, S size: 170mm M size: 175mm L size: 175mm XL size: 175mm, CL55 Corona: 32T, steel, X-Sync 2 Bottom bracket: Sram DUB BSA, sealed bearings, 73mm Chain: Sram SX Eagle, 12s, Powerlock Rear derailleur: Sram SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1 Shifters: Sram Trigger SX Eagle, 12s, X-Actuation 1:1 Cassette: Sram PG-1210, 11-50T, 12s Derailleur hanger: Sram UDH Weight: 16.5 kg *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY MOUNTED ITEM CODE 010.24119

SPECIALIZED TURBO TERO 3.0 STEP THROUGH BIKE The TURBO TERO 3.0 STEP THROUGH is an e-mtb that is perfect both for everyday rides and for mountain adventures. The strengths of this bike are the combination of power, confidence and versatility; features that make this bike durable, efficient and versatile. SPECIALIZED TURBO TERO 3.0 STEP THROUGH BIKE MAIN FEATURES: The Turbo Full Power 2.0E motor and the integrated 530 Wh battery quadruple the power you put on the pedals. Mission Control and MasterMind: via Mission Control it is possible to customize the assistance levels according to your preferences. All support modes can be adjusted for output and range. The MasterMind MicroTune function allows you to manage the levels in 10% increments. MTB DNA: all the components of the Tero are specifically chosen to improve control and confidence. The smooth-rolling and aggressive 29" wheels and Ground Control tires with 2.3" width offer excellent traction in any situation. The SRAM disc brakes are powerful and the 110mm travel at the front smooths out the trail. Turbo System Lock: via Mission Control it is possible to deactivate the bike’s motor and activate the motion sensor with alarm. Once locked, the motor cannot be started by anyone other than the owner. The bike is designed for mounting fenders, rear rack and kickstand. Compatible with child seats and with trailer carts for bikes with thru-axle. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME FRAME: E5 Aluminum, bottom bracket motor mount, fully integrated & lockable downtube battery, internal cable routing, lock and front rack mount. FORK: SR Suntour XCM32, 110mm travel, lockout. SEAT CLAMP: Alloy, bolt-type, 34.9mm. COCKPIT STEM: Stout 3D-forged alloy, 31.8mm, 6-degree rise. HANDLEBAR: Specialized Trail, 6061 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 31.8mm clamp, S 720mm, M-XL 750mm. GRIPS: Specialized Trail Grips, lock-on. SADDLE: Rivo Sport, steel rails, 155mm. SEATPOST: Specialized, 6061 alloy, 2-bolt clamp, 0mm setback, 30.9mm. BRAKES FRONT BRAKE: Shimano BR-MT200, hydraulic disc, 180mm. REAR BRAKE: Shimano BR-MT200, hydraulic disc, 180mm. DRIVETRAIN REAR DERAILLEUR: Shimano Alivio, SGS, 9-speed. SHIFTERS: Shimano Alivio, 9-speed w/ Optical Gear Display. CASSETTE: Shimano CS-HG400, 9-speed, 11-36t. CHAIN: KMC e9T, 9-speed w/ Missing Link™. CRANKSET: Custom alloy forged crankarms. CHAINRING: Praxis, 36T, 104BCD. WHEELS RIMS: Stout XC 29, 25mm internal width, disc-specific. FRONT HUB: Shimano MT400, Centerlock, 15x100mm, 32h. REAR HUB: Shimano MT400-B, Centerlock, 12x148 Boost, 32h. SPOKES: DT Swiss Industry. FRONT TIRE: Ground Control, 2Bliss Ready, 29x2.35". REAR TIRE: Ground Control, 2Bliss Ready, 29x2.35". TUBES: Presta, 48mm valve. E-BIKE MOTOR: Specialized 2.0E, 50Nm torque, custom tuned motor, 250W nominal. UI/REMOTE: MasterMind TCD, w/handlebar remote, built-in anti-theft feature, Bluetooth® connectivity, customizable display pages. BATTERY: Specialized U2-530, alloy casing, state of charge display, 530Wh. CHARGER: Custom charger, 42V4A w/ Rosenberger plug, 100-240V. CABLING: Custom wire harness. SIZE CHART SIZES HEIGHT S 155-165 CM M 165-178 CM L 175-185 CM XL 185-195 CM *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED ITEM CODE 95122-8302 (Size S - Color: White Mountains / Gunmetal)

YETI SB120C KIT C2 BIKE The YETI SB120C, with KIT C2, is a “downcountry” bike: it has the lightness of an XC bike, it pedals like an XC, it goes faster downhill than an XC bike and it has no lockouts on the handlebar. The Switch-Infinity floating pivot suspension sets new expectations for kinematics, longevity, sensitivity and strength.The frame silhouette takes inspiration from the SB160 and torsional precision and ground clearance have been increased, without transferring unwanted feedback to the rider. And the refined Switch Infinity makes this bike far more capable than its weight might suggest.The brand-new pivot design uses 100% standard-size cartridge bearings secured with precision: machined floating axles. All bearings are press-fit into the rear triangle or the front triangle.A relatively linear progression curve offers riders an active and usable travel with 30% sag, a much greater margin than other bikes with 120 mm of travel. The SB120’s small-bump sensitivity offers incredible traction. The mid-stroke has support that ensures riders don’t use up all the travel when aggressively cornering or lifting the wheels off the ground. The “Oh Shit!” moments are handled with ease: the compression curve has been tuned for greater control from start to finish.The bottom bracket is a threaded aluminum unit with integrated ISCG-05 mounts. If a derailleur hanger incident occurs, the new Yeti models use the UDH (Universal Derailleur Hanger) interface, the standard mount for a rear derailleur.The shorter seat tube allows the use of a longer dropper post. Most riders will be able to use a 150 mm dropper post on Small* frames, 175 mm on Medium* frames and 200 mm+ on L-XXL* frames (depending on the actual saddle height on the specific bike size).The ultra-compact, minimalist one-piece shock link has been specially designed for the needs of the shorter suspension travel of the SB120. In practice it optimizes the leverage rate by pushing the shock forward into the frame. This forward placement allows for a wide range of shock compatibility, decreases standover height, reduces overall link and pivot size, increases water bottle compatibility and increases available downtube clearance.The agile reach lets the bike dart nimbly along singletrack. Its steep seat angle makes climbing easier. Its head angle and balanced suspension travel prioritize downhill fun, making it an incredible Trans-Cascadia-style bike: the geometry of the sb120 is so balanced and agile that you might forget how much travel you have at your disposal. YETI SB120C KIT C2 BIKE MAIN FEATURES: Frame with 120 mm of travel. New switch infinity. Threaded bottom bracket. More clearance at the bottom of the downtube. UDH derailleur hanger. Shorter seat tube to install longer dropper posts. Chainstay length varies by size. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS DETTAGLI: C2, C series carbon, SRAM GX Eagle, Fox Performance 34 Fork FRAME: C/Series carbon fiber frame, Switch Infinity suspension technology, Threaded BB, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, Universal derailleur hanger (UDH), and axle. FORK: FOX FACTORY 34 GRIP2/130MM. MATERIAL: C SERIES. TRAVEL: 120MM (4.7"). SHOCK: FOX FACTORY FLOAT DPS. WHEELS: CRANK BROTHERS SYSTHESIS ENDURO 30MM REAR DERAILLEUR: SRAM GX EAGLE. SHIFTERS: SRAM GX EAGLE. CRANKSET: SRAM GX EAGLE 30T 170MM. BOTTOM BRACKET: SRAM DUB BSA 73. CASSETTE: SRAM GX EAGLE 1275 10-52. CHAIN: SRAM GX EAGLE. BRAKES: SRAM G2 RSC. ROTORS: SRAM CENTERLINE 180/SRAM CENTERLINE 180. SEATPOST: ONEUP DROPPER POST 31.6MM / XS-SM: 150MM, MD: 180MM, LG-XXL: 210MM. FRONT TIRE: MAXXIS MINION DHF 2.5 EXO. REAR TIRE: MAXXIS AGGRESSOR 2.3 EXO. HEADSET: CANE CREEK 40 INTEGRATED. HANDLEBAR: BURGTEC RIDE WIDE ALLOY ENDURO 35X780MM. STEM: BURGTEC ENDURO MK3 35X50MM. GRIPS: ODI ELITE PRO. SADDLE: SILVERADO CUSTOM. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED

MONDRAKER SLY R BIKE The new SLY R will take you to discover exciting new adventures on your mountain bike. With its eye-catching design and high-quality performance, you will be ready to tackle any route with style and confidence. MONDRAKER SLY R BIKE main features: Lightweight and durable aluminum frame that ensures maneuverability and long-lasting durability High-quality suspension that absorbs shocks and improves your riding experience Precise and reliable drivetrain to tackle demanding climbs and high-speed descents Powerful brakes that ensure safe braking in any condition THE BIKE IS DELIVERED PREASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Alloy Stealth Evo 6061, Zero Suspension System optimized, 150 mm travel, Forward Geometry, removable internal battery, Boost 12x148 mm rear axle, tapered head tube, one-piece upper link, internal HHG cable routing, MAX load capacity sealed bearings, oversized 15 mm axles, integrated dropout speed sensor, exclusive plastic motor covers. Motor: Bosch Performance Line SX (25Km/h) GEN4 SMART SYSTEM Diagonal Display: Bosch Mini Remote / Bosch System Controller Battery: Bosch Compact Powertube 400Wh Charger: Bosch Fork: Rockshox Psylo Gold RC, 160 mm, 3 positions, Debon Air, tapered steerer tube, Boost 15x110 mm thru axle, 35 mm steel stanchions, 44 mm offset. Adjustments: low-speed compression adjustment to lock, rebound, air preload Shock: Rockshox Deluxe Select+, 185x55mm, Trunnion upper mount, 30x8mm lower bushings Rear Derailleur: Sram S1000 Eagle AXS T-Type, 12s Front Derailleur: N/A Shifter: Sram Eagle AXS Pod MMX, 12s Cassette: Sram XS-1270, 10-52T, T-Type 12s Chain: Sram GX Eagle T-Type, 12s, Powerlock Corona: Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD Crankset: E.13 Helix Core E*Spec Plus, all sizes: 160 mm Front Brake: Sram DB8 stealth, 4-piston caliper, one-piece Centerline 200 mm brake rotor with 6 IS bolts, organic pads with steel backing plate Rear Brake: Sram DB8 stealth, 4-piston caliper, one-piece Centerline 200 mm brake rotor with 6 IS bolts, organic pads with steel backing plate Rotors: N/A Front Tire: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX GRIP compound, EXO+ protection, 60TPI, folding bead Rear Tire: Maxxis Minion DHR II 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 60TPI, folding bead Rims: Mavic E-CrossRide 29, 30 mm internal width, welded, PFP, tubeless ready, 28 spokes Front Hub: Mavic, Boost 15x110 mm, 6 IS bolts Rear Hub: Mavic, Boost 12x148 mm, Ratchet ID360 pawl system, 6 IS bolts, XD freehub Handlebar: ONOFF S3 1.0 6061 alloy, rise: 25 mm, width: 800 mm, 8º backsweep, 5º upsweep, 31.8 mm barbore. Size L and XL: 1.5 rise. Stem: ONOFF S3 30 mm 0º, forged 6061 alloy, 31.8 mm barbore Sella: FIZIK Terra Aidon X5 145 mm Seatpost: ONOFF Pija internal dropper, diameter 31.6 mm, 1X remote lever with bearing, size S: 140-115mm (388-235mm), size M: 160-135mm (428-255mm), size L: 180-155mm (468-275mm), size XL: 210-185mm (528-305mm) Maximum Permitted Weight: N/A Weight: N/A *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED

SANTA CRUZ HIGHTOWER 3 CC X01 RSV BIKE The SANTA CRUZ HIGHTOWER 3 CC X01 RSV BIKE is an all-terrain MTB with large wheels and medium travel that make it versatile and perfect on any terrain. The highly shaped and optimized Lower Link (A) houses a Flip Chip (B) that adjusts the geometry and the robust Pivot Axles (C) that virtually eliminate lateral flex.For the linkages Santa Cruz uses only top-quality Enduro MAX or TPX sealed radial bearings (A) and first-rate bolts (B) that are easy to tighten and maintain.The VPP suspension uses a one-piece swingarm that eliminates the need for pivots on the stays, creating a robust, bombproof rear end for precise tracking and superior performance.The Sag Window (A), the Glovebox (B) and the internal cable tunnels (not shown) demonstrate Santa Cruz's expertise in combining practical functionality with carbon design and the art of manufacturing.On their own, all these elements are excellent, but combined with obsessive suspension tuning, high-level build specifications and meticulous attention to detail, they become transcendent. SANTA CRUZ HIGHTOWER 3 CC X01 RSV BIKE MAIN FEATURES: CC carbon frame. Wheel size: 29". Front travel: 150mm. Rear travel: 145mm. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Carbon CC. SHOCK: Rockshox Super Deluxe Ultimate 210x55. FORK: FOX 36 Float Factory, 150mm. REAR DERAILLEUR: SRAM X01 Eagle AXS, 12spd. SHIFTERS: GX AXS Controller w/ Rocker Paddle. CASSETTE: SRAM XG1275 Eagle, 12spd, 10-50t. CHAIN: SRAM GX Eagle, 12spd. BOTTOM BRACKET: SRAM DUB 68/73mm Threaded BB. HEADSET: Cane Creek 40 IS Integrated Headset. REAR TIRE: Maxxis Minion DHR II 29"x2.4", 3C MaxxTerra, EXO, TR. FRONT TIRE: Maxxis Minion DHR II 29"x2.4", 3C MaxxGrip, EXO, TR. SEALANT: Reserve Tubeless Sealant. FRONT HUB: i9 1/1, 15x110, 28h. FRONT RIM: Reserve 30|HD 29", 28h. REAR HUB: i9 1/1, 12x148, XD, 28h. REAR RIM: Reserve 30|HD 29", 28h. FRONT ROTOR: Avid Centerline 180mm. REAR ROTOR: Avid Centerline 180mm. BRAKES: SRAM Code RSC. CRANKSET: SRAM X1 Eagle Carbon 148 DUB 32t. HANDLEBAR: Santa Cruz 35 Carbon Bar, 800mm. STEM: Burgtec Enduro MK3, 42mm. SADDLE: WTB Silverad Medium Ti. SEATPOST: RockShox Reverb Stealth, 31.6. GRIPS: Santa Cruz Bicycles House Grips. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY INSTALLED ITEM CODE 192219249520 (Size SM - Color: Gloss Trans Purple) / 192219249704 (Size XXL - Color: Matte Ever Green)

MONDRAKER FOXY R BIKE The MONDRAKER FOXY R BIKE has a 6061 ALLOY STEALTH EVO aluminum frame with hydroformed tubes, features the ZERO SUSPENSION SYSTEM and FORWARD GEOMETRY, a benchmark for current bikes. 160 mm front and 150 mm rear travel, Öhlins TTX fork and TTX Air shock of the same brand. The bike is equipped with a Sram NX Eagle/SX Eagle 12-speed drivetrain, e*thirteen LG1 Plus Enduro wheels, Sram G2 brakes and ONOFF components. MONDRAKER FOXY R BIKE MAIN FEATURES: 29" wheels. Zero suspension system. Forward Geometry. Stealth Alloy. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Foxy 29 6061 Alloy Stealth Evo, hydroformed tubes, Zero Suspension system, 150 mm travel, Forward Geometry, one-piece upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetrain design, internal routing for dropper seatpost, sealed bearings with maximum load capacity, ISCG 05. SIZES: S: 380 mm / M: 420 mm / L: 470 mm / XL: 510 mm. SHOCK: Öhlins TTX Air 205x62.5 mm. Adjustments: high-speed compression lever with climb mode, low-speed compression, rebound, air preload. Upper Trunnion mount, lower hardware 22.2x10 mm. SHOCK TUNE: Compression C20, rebound R35. FORK: Öhlins RXF 36 M.2 29, 160 mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110 mm axle, 44 mm offset. Adjustments: high-speed compression lever with climb mode, low-speed compression, rebound, air preload, air chamber ramp. Fork settings: C20 R40. HEADSET: ONOFF Saturn tapered for 1-1/8" to 1-1/2" head tube, sealed ACB bearings, 41x30.2x7x45ºx45º upper, 51.9x40x8x45ºx45º lower. STEM: ONOFF Sulphur FG 30 mm 0º, forged 6061 alloy, 31.8 mm bar bore. HANDLEBAR: ONOFF Sulphur 1.0 double-butted 6061 alloy, rise: 20 mm, width: 800 mm, backsweep angle 9º, upsweep angle 5º, 31.8 mm bar bore. GRIPS: ONOFF Twin, 1 lock-on, 135 mm. SEATPOST: Internal ONOFF Pija dropper seatpost, diameter 31.6 mm, size S: 405x95-125 mm, size M: 458x120-150 mm, size L: 498x140-170 mm, size XL: 498x140-170 mm. SELLA: SDG BEL-AIR 3.0, LPU foam, steel rails. FRONT BRAKE: Sram G2 R, 4-piston caliper, one-piece Centerline 200 mm brake rotor with 6 IS bolts, organic pads with steel backing plate. REAR BRAKE: Sram G2 R, 4-piston caliper, one-piece Centerline 180 mm brake rotor with 6 IS bolts, organic pads with steel backing plate. BRAKE LEVERS: Sram G2 R, SwingLink, tool-free lever reach adjustment. RIMS: e*thirteen LG1 Enduro, IW30 Hookless, welded 6069 aluminum, 30 mm inner width, tubeless ready, 28 spokes. SPOKES: Custom e*thirteen Hive triple-butted black steel, alloy nipples, nipple washers. FRONT TIRE: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120 TPI, folding bead. REAR TIRE: Maxxis Aggressor 29x2.3, tubeless ready, dual compound, Exo protection, 60 TPI, folding bead. CRANKS: Sram SX Eagle, Boost, DUB axle, direct-mount corona, size S/M: 170 mm, size L/XL: 175 mm. CHAINRING: 32T, CNC-machined alloy, X-SYNC 2. BOTTOM BRACKET: Sram DUB BSA, sealed bearings, 73 mm. CHAIN: Sram SX Eagle, 12s, Powerlock. REAR DERAILLEUR: Sram NX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1. SHIFT LEVERS: Sram Trigger SX Eagle, 12s, X-Actuation 1:1. CASSETTE: Sram XG-1230, 11-50T, 12s. DERAILLEUR HANGER: Mondraker M068. WEIGHT WITHOUT PEDALS: 15.7 kg. SIZE CHART SIZES HEIGHT S <165-170 CM M 170-180 CM L 175-190 CM XL 185->190 CM *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED ITEM CODE 010.23105 (Size S - Color: Blue) / 010.23106 (Size M - Color: Blue) / 010.23107 (Size L - Color: Blue) / 010.23108 (Size XL - Color: Blue)

MONDRAKER RAZE CARBON RR SL BIKE The brand new RAZE CARBON RR SL by Mondraker is the ideal choice for cyclists looking for high-level performance and an eye-catching design. With its light and durable carbon frame, this MTB offers a superior riding experience on all terrains, even the most demanding ones. Its Racing Silver S color catches the eye and adds a touch of elegance to every adventure in the saddle. MONDRAKER RAZE CARBON RR SL BIKE MAIN FEATURES: Light and responsive carbon frame for greater speed and agility. Geometry designed to maximize the rider’s efficiency and comfort. High-quality components for reliable and long-lasting performance. Ideal for tackling the most demanding trails in complete safety and control. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Raze 29 Stealth Air full Carbon, Zero Suspension System, 130mm travel, Forward Geometry, Carbon Monoblock upper link, Boost 12x148mm rear axle, tapered head tube, 73mm BSA bottom bracket, dedicated 1x drivetrain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. MIND System (EU only) SIZES: S: 380mm / M: 420mm / L: 450mm / XL: 500mm. SHOCK: Fox Float DPS Factory Kashima EVOL LV, 205x57.5mm. Settings: 3-position compression lever, low-speed compression, low-speed rebound, air preload. Trunnion top mount, 30x8mm bottom bushings. SHOCK SETTING: Light compression, light rebound, air volume spacer 0.6. FORK: Fox 36 29 Float GRIP2 Factory Kashima, 150mm, tapered steerer tube, Boost 15x110mm axle, 44mm offset. Settings: high- and low-speed compression, high- and low-speed rebound, air preload. HEADSET: Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, internal cable routing. STEM: ONOFF Krypton FG 30mm, CNC, 31.8mm barbore. HANDLEBAR: ONOFF Krypton Carbon 1.0, rise: 25mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm barbore. GRIPS: ONOFF Desert, 1 lock-on, 135mm. SEATPOST: Fox Transfer Factory Kashima internal, diameter 31.6mm, size S: 363.5x125mm, size M: 418.3x150mm, size L/XL: 475.1x175mm. SELLA: Fizik Antares R7. FRONT BRAKE: Sram G2 RSC, 4-piston caliper, Centerline 180mm IS 6-bolt one-piece rotor, steel-backed organic pads. REAR BRAKE: Sram G2 RSC, 4-piston caliper, Centerline 180mm IS 6-bolt one-piece rotor, steel-backed organic pads. BRAKE LEVERS: Sram G2 RSC, SwingLink, tool-free reach adjust. RIMS: Mavic CrossMax Carbon XL R, 29 Boost, 30mm internal width, hookless, tubeless ready, 24 spokes. SPOKES: 24 straight-pull double-butted spokes. FRONT HUB: Infinity hub, Boost 15x110mm, IS 6 bolts. REAR HUB: Infinity hub, ID360 freewheel technology, Boost 12x148mm, IS 6 bolts. FRONT TYRE: Maxxis Dissector 29x2.4 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead. REAR TYRE: Maxxis Aggressor 29x2.3, tubeless ready, dual compound, Exo protection, 60TPI, folding bead. CRANKSET: Sram XX1 Eagle, Boost, DUB axle, Direct mount chain ring, size S/M: 170mm, size L/XL: 175mm. corona: 32T, CNC-machined alloy, X-SYNC 2. BOTTOM BRACKET: Sram DUB BSA, sealed bearings, 73mm. CHAIN: Sram GX Eagle, 12s, Powerlock. REAR DERAILLEUR: Sram XX1 Eagle AXS, Type 2.1 roller bearing clutch, cage lock, long carbon cage, 1x12s, X-actuation 1:1. SHIFTER: Sram Eagle AXS Rocker paddle, 12s. CASSETTE: Sram XG-1295, 10-52T, 12s. DERAILLEUR HANGER: Sram UDH. WEIGHT: 13.0 kg. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

MONDRAKER FOXY CARBON XR BIKE The FOXY CARBON XR by mondraker is the bicycle that will allow you to tackle demanding trails with style and top-level performance. With its lightweight and durable carbon frame, this mountain bike is designed to offer a superior riding experience on rough terrain and descents. The eye-catching yellow design attracts attention and conveys a sense of adventure and dynamism. Whether you are climbing steep slopes or tackling fast corners, the FOXY CARBON XR is ready to make you vivere unique emotions in the saddle. MONDRAKER FOXY CARBON XR BIKE MAIN FEATURES: Lightweight and durable carbon frame for greater handling and durability. High-performance suspension that absorbs impacts and improves traction on uneven terrain. Advanced geometry for optimal control and a comfortable riding position. High-quality components for reliable and long-lasting performance. Eye-catching yellow design that gives a distinctive and sporty look. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Foxy 29 Stealth Air full Carbon, Zero Suspension System, 150mm travel, Forward Geometry, Carbon Monoblock upper link, Boost 12x148mm rear axle, tapered head tube, 73mm BSA bottom bracket, dedicated 1x drivetrain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. SIZES: S: 380mm / M: 420mm / L: 450mm / XL: 500mm. SHOCK: Öhlins TTX Air 205x65mm. Settings: high-speed compression lever with climb mode, low-speed compression, rebound, air preload. Trunnion top mount, 30x8mm bottom bushings. SHOCK TUNE: C10 compression, R35 rebound. Volume reducers 16.000 (2xF+1E). FORK: Öhlins RXF 36 M.2 29, 170mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110mm axle, 44mm offset. Settings: high-speed compression lever with climb mode, low-speed compression, rebound, air preload, ramp chamber. Fork settings: C20 R40. HEADSET: Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, internal cable routing. STEM: ONOFF Krypton FG 30mm, CNC, 31.8mm barbore. HANDLEBAR: ONOFF Krypton Carbon 1.0, rise: 25mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm barbore. GRIPS: ONOFF Desert, 1 lock-on, 135mm. SEATPOST: ONOFF Pija dropper internal, diameter 31.6mm, size S: 405x95-125mm, size M: 458x120-150mm, size L: 498x140-170mm, size XL: 498x140-170mm. SELLA: SDG BEL-AIR 3.0, LPU foam, steel rails. FRONT BRAKE: sram Code RSC, oversized 4-piston caliper, Centerline 200mm IS 6-bolt one-piece rotor, steel-backed metal sintered pads. REAR BRAKE: sram Code RSC, oversized 4-piston caliper, Centerline 180mm IS 6-bolt one-piece rotor, steel-backed metal sintered pads. BRAKE LEVERS: sram Code RSC, SwingLink and lever pivot bearings, tools-free reach and contact point adjust. RIMS: e*thirteen Race Carbon Enduro IW30, hookless carbon rim, 30mm internal width, tubeless ready, 28 spokes. SPOKES: e*thirteen custom Hive triple-butted black steel, alloy nipples, nipple washers. FRONT HUB: e*thirteen Boost 15x110mm, triple-sealed, fully machined aluminum, IS 6 bolts. REAR HUB: e*thirteen Boost 12x148mm, triple-sealed, fully machined aluminum with 6-degree engagement, IS 6 bolts, XD freehub. FRONT TIRE: maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX terra compound, EXO+ protection, 120TPI, folding bead. REAR TIRE: maxxis Minion DHR II 29x2.4 WT, tubeless ready, 3C MAXX terra compound, EXO+ protection, 120TPI, folding bead. CRANKSET: sram X01 Eagle, Boost, DUB axle, Direct mount chain ring, size S/M: 170mm, size L/XL: 175mm. CORONA: 32T, CNC-machined alloy, X-SYNC 2. BOTTOM BRACKET: sram DUB BSA, sealed bearings, 73mm. CHAIN: sram GX Eagle, 12s, Powerlock. REAR DERAILLEUR: sram X01 Eagle AXS, roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1. SHIFTER: sram Eagle AXS Rocker paddle, 12s. CASSETTE: sram XG-1295, 10-52T, 12s. DERAILLEUR HANGER: sram UDH. WEIGHT: 13.9 kg. *PRO-M STORE OFFERS THE BIKE PRE-ASSEMBLY SERVICE FREE OF CHARGE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

SPECIALIZED ROCKHOPPER COMP 2026 BIKE The most popular in summer, with an inclination for off-road adventure, the Rockhopper Comp loves action; it is fast and reliable thanks to its A1 Premium aluminum frame, and it is ready to debut on singletrack. The Rockhopper Comp is equipped with a RockShox Judy fork, alloy wheels, hydraulic disc brakes and Shimano 1x12 drivetrain. SPECIALIZED ROCKHOPPER COMP 2026 BIKE MAIN FEATURES: The lightweight A1 Premium alloy frame is the true cuore of this Rockhopper. Thanks to the butted tubes the weight is reduced while the structure is very resistant. The standover spazio is very generous, there is internal cable routing and the frame is compatible with the use of a dropper seatpost. With the goal of providing the optimal position for every rider, the Rockhoppers are available with two wheel sizes, so handling is ensured for everyone. The hydraulic disc brakes are powerful and intuitive. Single-chainring Shimano drivetrain with pulley on the derailleur to make it quiet and to prevent the chain from dropping. Very reliable Formula hubs and hookless alloy rims with 25mm internal diameter THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame Frame Specialized A1 premium butted alloy, zero-stack head tube, internal cable routing, 135x9mm forged dropouts, chainstay-mounted disc brake, replaceable alloy derailleur hanger, stealth rack mounts, dropper post compatible Seat collar Alloy, quick release, 34.9 Suspension Fork RockShox Judy, Solo Air, Turnkey damper, 46mm offset, QR, 80/90/100mm travel (size-specific), steel steerer Brakes Front brake Shimano BR-MT200, hydraulic disc, 180mm Rear brake Shimano BR-MT200, hydraulic disc, 180mm Drivetrain Shifters Shimano Deore M6100, 12-speed Rear derailleur Shimano Deore, M6100, 12-speed, Shadow Plus Cassette Sunrace, 11-51t, 12spd Chain KMC X12EPT, 12-speed, anti-corrosion coating w/ reusable Missing Link™ Crankset Stout 1x, forged alloy Bottom bracket Square-tapered, 73mm, internal bearings, 122.5mm spindle Wheels Rims Specialized Alloy, hookless, Tubeless ready, 25mm inner width Front hub Formula DC-20, 6-Bolt, disc, 100x9mm spacing, quick-release Rear hub Formula DC-22, 6-Bolt freehub, disc, 135x9mm spacing, quick-release Front tire Ground Control 27.5/29 x 2.35 Rear tire Ground Control 27.5/29 x 2.35 Inner tubes Standard, Presta Valve Spokes Stainless, 14g Cockpit Stem Stout 3D-forged alloy, 31.8mm, 6-degree rise Seatpost Alloy, 2-bolt clamp, 30.9mm Handlebar Specialized, alloy, 9-degree backsweep, 15mm rise, 31.8mm Grips Specialized Trail Grips, lock-on Saddle Bridge Sport, Steel rails, 155/143mm Accessori Pedals Specialized Body Geometry Fitness, Platform, Plastic Weight Weight 13.3 kg (29 lb, 5.1 oz) Measured size MD *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED

MONDRAKER CRUSHER R BIKE CRUSHER R by Mondraker is the perfect choice for mountain bike lovers who want a riding experience without compromises. With its bold design and cutting-edge technology, this mountain bike will take you to the top of the most demanding peaks and let you tackle breathtaking descents with confidence and style. MONDRAKER CRUSHER R BIKE MAIN FEATURES Light and durable carbon frame, designed to offer optimal performance on rough terrain High-quality suspension to absorb shocks and ensure a smooth ride on any type of terrain High-gamma components for greater precision and control while riding Modern and eye-catching design that does not go unnoticed on the trails THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Crafty Stealth Air Carbon front triangle, Zero Suspension System optimized for e-Bike, 150 mm travel, Forward Geometry, non-removable internal battery, Boost 12x148 mm rear axle, tapered head tube, one-piece upper link, internal cable routing system HHG, sealed bearings with MAX load capacity, oversized 17 mm axles, speed sensor integrated into the dropout, exclusive plastic motor covers. Sizes: S: 380 mm / M: 420 mm / L: 450 mm / XL: 490 mm Shock: Öhlins TTX Air 205X65 mm. Adjustments: high-speed compression lever with climbing mode, low-speed compression, rebound, air preload. Upper Trunnion mount, lower bushings 25x10 mm. Shock Tuning: Compression C20, rebound R35. Volume spacers 12,000 (2xF+1D). Fork: Öhlins RXF 38 M.2 29, 160 mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110 mm axle, 44 mm offset. Settings: high-speed compression lever with climbing mode, low-speed compression, rebound, air preload, progression chamber. Headset: Acros AZF-601 R1 Block Lock 120°, ZS44/28.6 upper, ZS56/40 lower. Stem: ONOFF Krypton FG 30 mm, CNC, 31.8 mm barbore. Handlebar: ONOFF Kripton Carbon 1.0, rise: 25 mm, width: 800 mm, backsweep angle 9º, upsweep angle 5º, 31.8 mm barbore. Grips: ONOFF Desert, 1 lock-on, 135 mm. Seatpost: Internal telescopic ONOFF Pija, diameter 31.6mm, Remote 1X lever, size S: 405x95-125 mm, size M: 458x120-150 mm, size L: 498x140-170 mm, size XL: 558x170-200 mm. Saddle: FIZIK Terra Aidon X5 145 mm. Front Brake: SRAM Code Bronze Stealth, oversized 4-piston caliper, one-piece Centerline 200 mm brake disc with 6 IS bolts, sintered metallo pads with steel backing. Rear Brake: SRAM Code Bronze Stealth, oversized 4-piston caliper, one-piece Centerline 200 mm brake disc with 6 IS bolts, sintered metallo pads with steel backing. Brake Levers: SRAM Code Bronze Stealth, SwingLink and lever pivot bushings, tool-free reach adjustment. Rims: Mavic E-Deemax 29, 30 mm internal width, welded, PFP, tubeless ready, 28 spokes. Spokes: Mavic J-bend double-butted, contactless lacing. Front Hub Axle: Mavic, Boost 15x110 mm, 6 IS bolts. Rear Hub Axle: Mavic, Boost 12x148 mm, ID360 ratchet system, 6 IS bolts, XD libero hub. Front Tire: Maxxis Minion DHF 29x2.6 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead. Rear Tire: Maxxis Minion DHR II 29x2.6 WT, tubeless ready, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding bead. Crankset: Shimano Steps FC-EM600 ebike, 165 mm. Chainring: SRAM X-Sync 2 Eagle 34T, alloy, narrow-wide, 104 BCD. Chain: SRAM NX Eagle, 12s, Powerlock. Rear Derailleur: SRAM X01 Eagle, Roller Bearing Clutch type 3 technology, cage lock, 1x12s, X-Actuation 1:1. Shifters: SRAM GX Eagle shifter, 12s, X-Actuation 1:1, single click. Cassette: SRAM XG-1275, 10-52T, 12s. Derailleur Hanger: Mondraker M068. Weight without Pedals: 24.1 kg. Display: Shimano EN600. Motor: Shimano STEPS EP801. Battery: Simplo internal 720Wh G3. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED ITEM CODE: 010.24365 (Size S; Color: Denim Blue)

MONDRAKER CHASER R BIKE Mondraker Chaser: much more than I imagined. More because the Stealth aluminum alloy frame houses an integrated 750 Wh battery and the latest version of what is perhaps the most relevant motor on the market today: the Bosch CX. More because the Zero suspension system offers 150 mm of travel (with a 160 mm fork). More because you have three configurations to choose from, in addition to all the new ONOFF components and Forward Geometry. SPECIFICATIONS: Frame Chaser 6061 Alloy Stealth Evo, Zero suspension system optimized for e-Bike, 150 mm travel, Forward geometry, non-removable internal battery, Boost 12x148 mm rear axle, tapered head tube, Monoblock upper link, internal HHG cable routing, MAX capacity sealed bearings, 17 mm oversize axles, integrated dropout speed sensor, exclusive plastic motor covers, shock mudguard Sizes S: 380mm / M: 420mm / L: 450mm / XL: 490mm Rear shock Fox Float Rhythm, 205x65mm. Settings: 2-position compression adjustment (Open/Firm), rebound, air preload. Trunnion upper mount, 25x10mm lower bushings Shock settings Compression LCM, rebound LRM, CML, 0.4 air volume spacer Fork Fox 36 29 Rhythm Float GRIP, 160 mm, e-bike tuned, tapered steerer tube, Boost 15x110 mm axle, 44 mm offset. Settings: sweep compression adjustment, low-speed rebound, air preload Headset Onoff ZS44/ZS56, 1-1/8", 1.5" head tube, ACB sealed bearings, upper 42x30x7x45ºx45º, lower 52x40x8x45ºx45º Stem Onoff S3 30mm 0º, forged 6061 alloy, 31.8mm bar clamp Handlebar Onoff S3 1.0 6061 alloy, rise: 25mm, width: 800mm, 8º backsweep, 5º upsweep, 31.8mm bar bore. Sizes L and XL: rise 1.5. Grips On-Off Hive, single lock, 135 mm Seatpost Onoff Pija internal dropper, diameter 31.6 mm, 1X remote lever with bearing, size S: 140-115 mm (388-235 mm), size M: 160-135 mm (428-255 mm), size L: 180-155 mm (468-275 mm), size XL: 210-185 mm (528-305 mm) Saddle Black MDK e-bike Front brake Sram DB8, 4-piston caliper, Centerline 200mm IS 6-bolt one-piece rotor, organic pads with steel backing plate Rear brake Sram DB8, 4-piston caliper, Centerline 200mm IS 6-bolt one-piece rotor, organic pads with steel backing plate Brake lever Sram DB8, tool reach adjustment, lever pivot bushings Rims Mavic E-Deemax 29, 30mm inner width, welded, PFP, tubeless ready, 28 spokes Spokes Mavic J-bend double-butted, non-contact lacing Front hub Mavic, Boost 15x110mm, IS 6-bolt Rear hub Mavic, Boost 12x148mm, ID360 Ratchet system, IS 6-bolt, HG freehub Front tire Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead Rear tire Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead Crankset Race Face Aeffect-R e-bike, 160mm Chainring Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD Chain Sram SX Eagle, 12-speed, Powerlock Rear derailleur Sram GX Eagle, 12-speed Shifters Sram Trigger SX Eagle, 12s, X-Actuation 1:1, single click Cassette Sram PG-1210, 11-50T, 12s Motor New Bosch Performance Line CX Cruise system (25 km/h) GEN4 SMART (BDU384Y) Battery Bosch Powertube 750 Wh battery Display Bosch Intuvia 100 / Bosch Mini Remote / Bosch System Controller Derailleur hanger Sram UDH Weight 24.9kg

SPECIALIZED CHISEL HT COMP 25 BIKE This Chisel is a cross-country hardtail, perfect for modern trails and race courses. It shares many of the racing features of the Epic Hardtail, in a more affordable configuration. The Chisel Comp is equipped with SRAM NX Eagle 1x12 drivetrain, powerful Level T hydraulic disc brakes, RockShox Judy Gold fork and alloy wheels with Fast Track Control 2.3" tires. SPECIALIZED CHISEL HT COMP 25 BIKE KEY FEATURES: We asked ourselves – How can we offer top-level performance at a price that more riders can afford? – The answer is with D'Aluisio Smartweld technology, which allows us to create strong welds, making the most of the hydroformed alloy tubes. The result is one of the lightest alloy hardtail frames on the market, with a weight of 1,350 g and stiffness tuned for each size. The Chisel has all the features you would expect from a moderna cross-country bike, such as progressive geometry with a 68-degree head angle, longer reach, internal cable routing, threaded bottom bracket, boost, compatibility with 30.9mm telescopic seatpost and solo for single corona setup. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame Frame Specialized D'Aluisio Smartweld M5 Alloy, Hydroformed tubes, Progressive XC Geometry, internal cable routing, BSA BB, 12x148mm spacing, 30.9mm Dropper post compatible Collarino sella Specialized Alloy, 34.9mm Suspension Fork RockShox Judy Gold, Motion Control damper, Solo Air, 42mm offset, 15x110mm thru-axle, 100mm of travel (XS - 80mm travel) Brakes Front brake SRAM Level T hydraulic disc, 2-piston caliper Rear brake SRAM Level T hydraulic disc, 2-piston caliper Drivetrain Shifters SRAM NX Eagle, trigger, 12-speed Rear derailleur SRAM NX Eagle, 12-speed Cassette SRAM NX Eagle, 12-speed, 11-50t Chain SRAM XX1 Eagle, 12-speed Crankset SRAM FC X1 1000 EAGLE B148 DUB 32ST Gearing 32t Bottom Bracket SRAM DUB, BSA 73mm, threaded Wheels Rims Specialized 29, 27mm inner width, 28h, tubeless ready Front hub Alloy front hub, sealed cartridge bearings, 6-bolt, 15x110mm thru-axle, 28h Rear hub Alloy rear hub, sealed cartridge bearings, 12x148mm thru-axle, 6-bolt, 28h Front tire Specialized Fast Trak, Control Casing, T7 Compound, 29x2.35 Rear tire Specialized Fast Trak, Control Casing, T5 Compound, 29x2.35 Inner tubes Standard 40mm PV 29x1.75-2.4 Wheels & Tires Spokes Stainless, 14g COCKPIT Stem Specialized, 3D-forged alloy, 4-bolt, 7-degree rise Handlebar Specialized Alloy XC minirise, double-butted alloy, 8-degree backsweep, 6-degree upsweep, 10mm rise, 31.8mm Seatpost Specialized Alloy, Single Bolt, 30.9mm Cockpit Grips Specialized Trail Grips Sella Body Geometry Power Sport, steel rails Weight Weight 11.76 kg (25 lb, 14.8 oz) Measured size LG *PRO-M STORE OFFERS FREE PRE-ASSEMBLY SERVICE FOR THE BIKE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED