Forks

FOX 34 PERFORMANCE FLOAT FORK 27.5 150 MM 51 MM RAKE FOX 34 PERFORMANCE FLOAT 27.5 P-S fork, 150, Grip 3Pos, PMS-320C/PMS-320C, 51 mm rake. Tapered steerer tube 1''1/8-1,5'', 15x110 axle, air float spring. The GRIP cartridge, taking inspiration dal mondo delle moto, uses FIT sealed cartridge technology combined with an independent floating piston a spirale. GRIP allows excess oil to pass through specially designed openings at the top of the damper to maintain consistent damping and increase durability. Performance series forks offer Open, Medium and Firm modes with additional micro adjustment between settings. The FLOAT air spring system is lighter and reduces the force required to start pedaling. The Float system features positive and negative air springs that automatically equalize during use to give every rider the right balance of pressure. The progressivity of the spring curve can be adjusted via air volume spacers del volume d'aria.

ROCK SHOX SID ULTIMATE FLIGHT ATTENDANT RD 29 BOOST 120MM 44MM OFFSET FORK Rock shox Sid Ultimate Flight Attendant rd 29'' fork with 120mm travel and 44mm offset. 15x110mm BOOST axle. It has automatic compression adjustment in three positions (Open / Pedal / Lock) and a DebonAir+ spring that offers greater sensitivity on small bumps and adjustable mid-stroke support. Adaptive Ride Dynamics allows the Flight Attendant system to use a series of sensors to read rider and terrain inputs and anticipate the perfect suspension position. Enabled for AXS and cable-free, Flight Attendant is an integral part of the SRAM AXS ecosystem. ROCK SHOX SID ULTIMATE FLIGHT ATTENDANT RD 29 BOOST 120MM 44MM OFFSET FORK MAIN FEATURES: 29'' Boost wheel diameter 120mm travel 44mm offset 1.5" Tapered steerer tube 15x110mm BOOST axle DebonAir+ spring Flight Attendant Controlled adjustment Maximum rotor size 220mm Minimum rotor size 180mm Adaptive Ride Dynamics allows the Flight Attendant system to use a series of sensors to read rider and terrain inputs and anticipate the perfect suspension position. Charger Race Day 2 Flight Attendant, through the electronic system, offers automatic compression adjustment and three positions (Open/Pedal/Lock) with adjustable rebound. Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer and improves performance DebonAir+ provides greater sensitivity Battery shared with all SRAM AXS enabled components Flight Attendant System is IPX7 waterproof AXS enabled and cable-free Weight 1624g

ROCK SHOX SKF 32MM DUST SEAL KIT NO FLANGE 32 mm dust seal kit without collar to service the fork. Compatible with ROCKSHOX forks: BLUTO/RS-1/SID B1 (2017+) / all forks with 32 mm BOOST upper tubes. ITEM CODE X.00.4318.045.003

FOX GRIP CARTRIDGE SEAL KIT COMPATIBLE WITH 32-34-36-40 2017-2018 MODELS GRIP cartridge seal kit for 32, 34, 36, 40 model (2017 / 2018). ITEM CODE 60X80301141

COMPLETE ROCK SHOX SEAL KIT FOR ZEB R SELECT A1 DEBONAIR 2021 FORKS Replacement seal kit for ROCK SHOX ZEB R/SELECT A1 DebonAir forks for servicing after 200 hours of use (about 1 year). ITEM CODE 00.4318.025.185

FOX 2022 FACTORY FLOAT 38 29 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 FORK The FOX 2022 FACTORY FLOAT 38 29 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 FORK is built on 38 mm stanchions with Kashima finish, a floating axle, a new arco design and lower bleed valves to release accumulated pressure.The floating axles offer a clear performance advantage thanks to their ability to match the exact width of the fork wheel mounting surface exactly to the spacing of the front hub flange, perfectly aligning the chassis and eliminating friction between the upper and lower fork legs.The elliptical steerer tube optimizes stiffness-to-weight and, by adding material only where necessary, eliminates every superfluous gram. FOX 2022 FACTORY FLOAT 38 29 F-S 160 GRIP2 HSC/LSC SBLK 15QRX110 R44 FORK MAIN FEATURES: Wheel size: 29". Travel: 160 mm. Rake: 44. Axle: 15QR x 110. Upper tube finish: Kashima Coat. canali d'aria: yes. Bleed valves: yes. Floating axle: yes. Rotor size 180 direct mount. Compatible up to 230. FLOAT EVOL aria spring. 1.5 tapered steerer. Elliptical internally. Starting weight: 2180 g. ADJUSTMENT High-speed compression (w/VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (w/VVC) 8 clicks. Low-speed rebound 16 clicks. ITEM CODE 60X91021024

FOX 2022 FACTORY FLOAT 34 29 F-S 140 GRIP2 HSC/LSC ORNG 15QRX110 R44 FORK The FOX 2022 FACTORY FLOAT 34 29 F-S 140 GRIP2 HSC/LSC ORNG 15QRX110 R44 is the smoothest, lightest and easiest to adjust fork in the world and is perfect to be mounted on Trail MTBs. When a fork compresses, the air volume inside the lower legs decreases, increasing the air pressure. The more the fork compresses, the more the pressure increases. This effect can have the undesirable consequence of preventing full travel from being reached. The canali of FOX forks, positioned at the bottom of the legs, help relieve this problem by drastically increasing the air volume inside the lower legs, reducing the pressure. The design ad arco is designed to match perfectly with modern trail bikes: head tube profiles are larger while fork offsets are shorter. The Grip2 damper is easy to adjust, offers an unparalleled ride, and is equipped with Variable Valve Control (VVC) technology that allows external suspension adjustment. The EVOL air spring, in the 34 fork, now has an enlarged negative air spring to help mid-stroke support. FOX 2022 FACTORY FLOAT 34 29 F-S 140 GRIP2 HSC/LSC ORNG 15QRX110 R44 FORK MAIN FEATURES: Wheel size: 29 mm. Travel: 140 mm. Rake: 44. Axle: 15QR x 110. Upper tube finish: Kashima Coat. Rotor size: 180 direct Post Mount, compatible up to 180. Air spring: FLOAT EVOL. Steerer: 1.5 tapered. Starting weight: 1738 g (F-S, 34, 29”, 130 mm Travel, Kabolt 110, 3 Pos-Adj)*: * The fork weights indicated are at 165 mm length with dado a stella and disc brake guide installed. All 34 forks have adjustable air spring pressure and rebound adjustment. HOW TO ADJUST THE GRIP2 DAMPER: High-speed compression (w/VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (w/VVC) 8 clicks. Low-speed rebound 16 clicks. ITEM CODE 60X91021003

ROCK SHOX CHARGER 2.1 RC2 LYRIK B1+/YARI A1 (2016+) UPGRADE KIT The Rock Shox Charger 2.1 RC2 cartridge kit for Lyrik B1+ and Yari A1+ (2016+) forks improves the behavior of the fork with the latest evolution of the Charger hydraulic cartridge. The RC2 adjustment allows independent adjustment of low-speed (Lsc) and high-speed (Hsc) compression.This cartridge is equipped with low-speed scatto adjustment (Lsr) and a scatto piston with rapid recovery technology that increases grip. ROCK SHOX CHARGER 2.1 RC2 LYRIK B1+/YARI A1 (2016+) UPGRADE KIT MAIN FEATURES: High-speed compression setting that reduces arm fatigue. Low-speed compression that preserves maximum travel. New scatto piston that improves oil flow management and new guide ring that optimizes smoothness of operation. New SKF seal that reduces friction by more than 30%. New MAXIMA oil that reduces friction and hydraulic noise. Cartridge compatible with ROCKSHOX Lyrik B1+ / Yari A1 (2016+) forks. ITEM CODE X.00.4020.170.000

MOTOREX RACING FORK OIL 2.5W 1 LITER Oil specially designed for fork suspension. The MOTOREX 3D RESPONSE TECHNOLOGY harmonizes the many characteristics required of a fork oil of moderna design: the tensile and impact forces are therefore no longer deflected using the “accordion” (zigzag) method but rather through a type of multi-level “network structure”. Maximum reduction of friction, improvement of stick and slip, optimal air separation behavior. ITEM CODE M306402

ROCK SHOX PUMP FORKS SHOCK ABSORBERS 20 BAR 2 FASI 360 DEGREES 20 bar - 300 PSI pump for shock absorbers, suspension forks and tires ROCK SHOX PUMP FORKS SHOCK ABSORBERS 20 BAR 2 FASI 360 DEGREES main features: 20 bar / 300 psi pump 2-in-1 aluminum pump for shock absorbers, forks and tires conversion between single stage (high pressure) or two fasi (high volume) 360° rotating hose with button for aria release foldable ergonomic handle high-sealing valve with Schrader and Presta head removable 300PSI valve with protective rubber coating and rubber protection includes mounting clip with bolts to the bottle cage and safety cinghia in straps

ROCK SHOX SERVICE KIT 1Y 200H 35 GOLD RL DB A1 Service kit for Rockshox Gold RL A1 forks from 2020. Kit for 200-hour / 1-year use overhaul. ITEM CODE 00.4318.025.050

FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 F-S 170 GRIP2 HSC/LSC ORNG KX110 R44 2023-2024 FORK The FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 F-S 170 GRIP2 HSC/LSC ORNG KX110 R44 2023-2024 FORK is perfect to be mounted on Enduro MTBs with 170 mm of travel. It has the same revolutionary features as the 36 but redefines the characteristics of a long-travel single-crown fork and sets a new benchmark in terms of safety, performance, and durability. The floating axles offer a clear performance advantage thanks to their unique ability to match the exact width of the fork wheel mounting surface with the spacing of the front hub flange, thus creating perfect frame alignment and eliminating unwanted friction between the upper and lower fork legs. The floating axles ensure a much smoother suspension movement along the entire travel of the fork, greatly improving sensitivity and overall ride quality.The Fox 38 fork is equipped with a new quick-release lever floating axle system, patent pending, which combines the advantages of a floating axle with the ease of a tool-free quick release. With this system, the spacing is locked by a floating sleeve, which allows you to remove and reinstall the front wheel repeatedly while maintaining perfect fork alignment. The positioning of the floating sleeve is factory preset, so if you are not sure how to use the floating axle system or simply do not want to deal with it, you can simply install the front wheel and continue your ride.The Kabolt-X axle is a lightweight floating axle that reduces weight and increases torsional rigidity thanks to its single-sided axle design without a sleeve. Frame alignment must be reset every time the front wheel is removed and reinstalled on both the Kabolt-X floating axle and the 40 one, but the end result is the same: perfect alignment and perfect performance.When the fork compresses, the air volume inside the lower legs decreases, increasing air pressure. The more the fork compresses, the more the pressure increases. This effect can have the undesirable consequence of preventing full travel from being reached. The bypass channels, positioned at the bottom of the fork, help to alleviate this problem by drastically increasing the air volume inside, thus reducing the amount of unwanted additional pressure ramping.The lower leg oil is circulated to the top of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.The lower leg bleed system allows pressure equalization with the simple press of a button. Pressure build-up in the lower legs drastically reduces fork performance, preventing maximum travel from being reached and decreasing sensitivity and responsiveness on small bumps.Our brand-new lower leg design has been studied to reduce every possible gram, without compromising the stiffness and strength required by modern enduro and gravity bikes.The arch design of this fork is intended to match perfectly with modern Enduro and Downhill bikes. Head tube profiles have become increasingly larger and fork offsets increasingly shorter. The new arch shape takes this need into account, protruding forward to provide ample clearance for the head tube at maximum compression.The Grip2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustment. It includes Variable Valve Control (VVC) technology, which allows fine external tuning of suspension performance. GRIP2 allows you to achieve, with the simple rotation of a knob, what usually requires the long and complicated task of fully disassembling and reassembling the fork.The EVOL technology increases the volume of the negative air spring, optimizing small bump sensitivity. The linear EVOL spring curve offers greater suppleness at the beginning of the travel, more support in the mid-stroke, and a more adjustable end-stroke progression. The advantages of this technology are further enhanced by the new channels for the lower legs and the bleed valves that reduce the air pressure trapped in the lower legs, allowing the EVOL air spring to operate freely without unwanted interference.The Factory series products are characterized by the original ultra-durable and slippery Kashima coating. FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 F-S 170 GRIP2 HSC/LSC ORNG KX110 R44 2023-2024 FORK MAIN FEATURES: Wheel size: 29". Travel: 170 mm. Rake: 44, Axle: 15QR x 110. Upper tube finish: Kashima Coat. Canali d'aria. Bleed valves. Floating axle. Brake disc size: 180 mm direct mount, compatible up to 230 mm. Possibility to mount a (optional) FOX 36/38 mudguard with strong 4-point direct mount. FLOAT EVOL air spring. Tapered 1.5 steerer. GRIP2 ADJUSTMENT High-speed compression (w/VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (w/VVC) 8 clicks. Low-speed rebound 16 clicks. ITEM CODE 60X91021107

ROCK SHOX REBA 2009+ SID RL 2012+ REVELATION RL 2012+ PIKE 2005-2010 ADJUSTMENT CAP This Motion Control DNA compression adjustment knob is suitable for RockShox SID RL suspension forks from 2011 / Revelation RL from 2012. ITEM CODE 11.4015.547.020

ROCK SHOX JUDY 30S 29-27.5 COMPRESSION CARTRIDGE Replacement cartridge for Rockshox Judy 30 27.5'' and 29'' forks. Compatible with forks from 2018 onwards. ITEM CODE 11.4018.104.018

ROCK SHOX ONELOC LEFT LOWER 10MM HANDLEBAR REMOTE The ROCK SHOX oneloc right over/left under handlebar remote accessory is designed to offer precise and intuitive control of your bike's suspension. With this innovative accessory, you can easily adjust your suspension directly from the handlebar, ensuring a smoother and more customized ride on any terrain. ROCK SHOX ONELOC LEFT LOWER 10MM HANDLEBAR REMOTE MAIN FEATURES: Ergonomic design for easy use while riding. Compatible with ROCK SHOX suspensions for perfect integration. Quick and precise suspension adjustment directly from the handlebar. Mounting option both above and below the handlebar for optimal customization. ITEM CODE 00.4318.002.010

fox FORK 2023 34 FLOAT 29 F-S 140 GRIP2 HSC/LSC SBLK 15QRX110 R44 The 2023 fox 34 is the Trail fork that does tutto. More supple, lighter, more adjustable and more capable than ever: when it comes to an “all-rounder” trail fork, the 34 is in a classe of its own. When the fork compresses, the volume of aria inside the lower legs decreases, increasing the aria pressure. The more the fork compresses, the more the pressure increases. This effect can have the undesired consequence of preventing the achievement of full travel. The fox channels help to alleviate this problem, drastically increasing the volume of aria inside the lower part of the legs and thus reducing the amount of unwanted additional pressure ramping.The oil circulates in the upper part of the lower legs, continuously lubricating the foam rings and the bushings as the fork compresses and extends during its stroke. The arco design has been engineered to match perfectly with modern Enduro and Downhill bikes. Head tube profiles have become increasingly larger and fork offsets increasingly shorter. The new forma of the arco takes this need into account, projecting forward to provide ample spazio for the head tube at maximum compression. The GRIP2 damper is easy to adjust and offers ultra-precise riding. The patented Variable Valve Control (VVC) technology allows simple and easy external adjustment with the simple rotation of a knob. Returning with the same legendary suppleness and longevity, the EVOL aria spring in the 34 version is now equipped with a larger negative aria spring to help support in the mid-stroke. fox FORK 2023 34 FLOAT 29 F-S 140 GRIP2 HSC/LSC SBLK 15QRX110 R44 MAIN FEATURES: Wheel size: 29. Travel: 140 mm. Rake: 44. Axle: 15QR x 110. Upper tube finish: Kashima Coat. Brake disc size: from 180 to 203 pm. Aria spring: FLOAT EVOL. Steerer: 1.52 tapered. Weight (approx.): 1738g. ITEM CODE 910-21-001

BURGTEC THRU AXLE FORK FOX 2021+ Sturdy thru axle with 6 mm hex fitting on both ends that allows the use of a torque wrench to ensure secure wheel mounting. In addition, if things should seize, this "get-out-of-jail" feature offers a second chance to release the axle from the fork. Compared to a quick-release solution, the leverless design of this lightweight and stiff thru axle made of 7075 aluminum not only saves weight, but also adds safety and space for the toughest situations on the trail. BURGTEC THRU AXLE FORK FOX 2021+ KEY FEATURES: Version for fox 36, 38 and 40 forks from model year 2021 onwards. 15x110 mm Boost, compatible with M14 x 1.5 thread pitch. non compatible with 2021+ (2022, 2023 etc.) 32 and 34 versions.

FOX GRIP2 36 AND 40 CARTRIDGE SEAL KIT UP TO 2020 GRIP2 cartridge seal kit for 36 and 40 models (up to 2020). ITEM CODE 60X80301316

SPECIALIZED AIR TOOL SHOCK PUMP Shock pump that allows you to quickly and accurately reach alte pressures. MAIN FEATURES OF THE SPECIALIZED AIR TOOL SHOCK PUMP: Flexible hose resistant to oil and alte pressures. Micro aria release to adjust the pressure precisely. Flexible hose resistant to oil and alte pressures. Compact design. Practical T-handle. Pressure up to 300PSI (20.7 bar). Volume-per-stroke: 11cc. ITEM CODE 472E-3005

FORMULA SELVA C 27.5"+ / 29" QR15X110MM (BOOST) T.160MM BLACK FORK The SELVA C 27.5"+ / 29" QR15X110MM (BOOST) T.160MM BLACK FORK by Formula is designed to tackle the most demanding terrains with uncompromising performance and durability. With its innovative design and cutting-edge technology, this fork will allow you to dominate the trails like never before. FORMULA SELVA C 27.5"+ / 29" QR15X110MM (BOOST) T.160MM BLACK FORK main features: For 27.5"+ or 29" wheels with QR15X110mm (BOOST) axle and 160mm travel Elegant and durable black design Advanced technology for a smooth and responsive ride Robust construction to handle rough terrain

OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK The proven TTX 18 shock from the DH38 Race fork has been revised to offer even more traction and control on Enduro trails. The TTX 18 cartridge kit includes an 18 mm piston optimized for trail riding to improve small bump sensitivity.The adjustment system is specific for Trail and Enduro racing and provides 15 clicks for low-speed compression and low-speed rebound. For high-speed compression there are 3 clicks plus a climb mode setting. Three-chamber dual-piston air spring system, which allows full adjustment of the air springs from the initial movement all the way to the end of the travel.The fork can accommodate 29×2.8 tires. OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK MAIN FEATURES: TTX technology. Travel: 170 mm. Diameter: 38 mm. Offset: 44 mm. Compatibility with 29x2.8 tires. Race-proven adjustment system. General improvements to reduce friction. ITEM CODE FGMTB 3817 2210

RACING BROS 40 EDGE ZERO DUST SEALS The edge zero friction dust seal kit, una volta installed and combined with suitable lubricants, allows you to non feel any kind of friction on your bike anymore. The kit includes: 2 dust seals 2 sponges 2 PVC sealing rings 1 aluminum sealing ring. Compatibility with Fox racing shocks Fox 40, 40 R, 40 RC2, 40 Fit RC2, 40 Float, 40 Float RC2.

ROCK SHOX 35 MM ULTRA LOW FRICTION WIPER RING KIT WITHOUT FLANGE 35 mm wiper ring kit without flange to service the fork using the brand-new generation of seals developed in collaboration with SKF, known worldwide for the quality of its products. A reduced level of friction that allows for ever greater grip and comfort.Compatible with ROCKSHOX PIKE/LYRIK B1/YARI/REVELATION/BOXXER/DOMAIN/35/SID 35 forks. ITEM CODE 00.4318.045.004

SKF EXTERNAL SEALS KIT FOR 34 MODELS AND BOMBER Z2 Kit that allows the fork to maintain perfetto operation. For 34 mm stanchions. Low friction. ITEM CODE 60X80300945