Ultimi arrivi

TIRE PIRELLI P-ZERO RACE TLR WHITE 700X26 26-622 The new P Zero Race TLRs are the first PIRELLI product with tubeless technology fully made in Italy, at the new Bollate factory. The new generation of PZERO Race TLR is the most performing tire in the PIRELLI portfolio as well as the first tubeless-ready tire entirely made in Italy. The introduction of the new SPEEDCORE technology in the 120tpi casing involves using a aramid-reinforced compound that coats the inner layer of the tire, improving both rolling efficiency and rubber resistance. Result: a less rigid but faster tire. The compound maintains the same advanced SmartEVO technology, shared with other high-performance PZERO tires. PIRELLI P-ZERO RACE TLR WHITE 700X26 26-622 MAIN CHARACTERISTICS: The tread of P Zero™ Race TLR is an evolution of the P Zero™ Velo design: years of research and development on World Tour roads have led to a new pattern that improves the bicycle's behavior in every weather condition. High rolling efficiency. High grip. Puncture protection. Excellent handling. Sizes 26-622 and smaller are NOT compatible with hookless rims. Sizes 28-622 and larger are compatible with hookless rims (maximum pressure 5 bar/73 psi). Type: TLR Tubeless Ready. Etrto: 26-622. Tpi: 120. Pressure: 6 - 7.7 bar (87 - 110 psi). Weight (approx.): 300 g. TECHNOLOGIES SmartEVO Compound The racing formulation for road use, more advanced than ever, born from Pirelli’s experience in top Motorsport competitions and in close collaboration with the World Tour factory teams. The new SmartEVO Compound uses a blend of 3 different polymers, each providing performance in a perfect balance of opposite characteristics, such as grip and rolling resistance. The ternary polymer blend with “intelligent” behavior characteristics at the base of the exceptional properties of the SmartEvo compound enables better grip on dry and wet surfaces, while also improving rolling resistance. SmartEVO Compound is a high-performance compound tuned for the most modern cycling disciplines, from local races or the World Tour to epic adventures where weather and road surfaces require tires that excel in all conditions. SmartEVO is exclusive to the P ZERO range. SPEEDCORE The most performing tubeless-ready road structure in the Pirelli range foresees the use of a specced aramid-reinforced compound layer that coats the inner tire layer allowing air retention. This new structure makes the tire more resistant due to the presence of aramid, yet less rigid and faster, for greater flexibility of the compound compared to a bead-to-bead fabric. The casing is then completed by a 120tpi Nylon layer and by a puncture-resistant layer, also in aramid.

BICYCLE MONDRAKER CHASER 2025 CHASER: MUCH MORE THAN YOU IMAGINEMuch, because the Stealth aluminum alloy frame houses an integrated 750Wh battery and the latest version of perhaps the most important motor on the market today: the Bosch CX. Much, because the Zero Suspension System offers 150 mm of travel (with a 160 mm fork). Much, because you have three models to choose from, in addition to the very new ONOFF components and Forward Geometry. The Chaser is our best and most affordable full-suspension eMTB for anyone looking to get into the world of e-bikes. BICYCLE MONDRAKER CHASER 2025 MAIN FEATURES: Sram SX Eagle 12v. Bosch GEN4 CX Smart. 625Wh e-Bike. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Chaser 6061 Alloy Stealth Evo, Zero Suspension System optimized for e-Bike, 150 mm travel, Forward Geometry, removable internal battery, 12x148 mm Boost rear axle, tapered head tube, monoblock upper link, internal cable routing HHG, MAX sealed bearings, oversized 17 mm axles, integrated dropper sensor, exclusive plastic motor covers, suspension fender Sizes: S: 380 mm / M: 420 mm / L: 450 mm / XL: 490 mm Rear shock: RockShox Deluxe Select R Debonair, 205x65 mm. Settings: low-speed compression, air preload. Upper Trunnion mount, lower bushings 25x10 mm Shock adjustment: Light compression, linear rebound, 1 Token Fork: RockShox Psylo Silver 29, 160 mm, motion control damper, Solo Air, tapered steerer tube, Boost 15x110 mm axle, 35 mm steel stanchions, 44 mm offset. Settings: low-speed compression for lockout, rebound, air preload Handlebar: ONOFF ZS44/ZS56, 1-1/8" steerer tube, 1.5", sealed ACB bearings, upper 42x30x7x45ºx45º, lower 52x40x8x45ºx45º Headset: ONOFF S3 30 mm 0º, forged 6061 alloy, barwidth 31.8 mm Handlebar: ONOFF S3 1.0 alloy 6061, rise: 25 mm, width: 800 mm, backsweep 8º, upsweep 5º, bar width 31.8 mm. Size L and XL: rise 1.5. Grips: ONOFF Beehive, 1lock-on, 135 mm Seatpost: Internal telescopic ONOFF Pija, diameter 31.6 mm, remote lever 1X with bearing, size S: 140-115mm (388-235mm), size M: 160-135mm (428-255mm), size L: 180-155mm (468-275mm), size XL: 210-185mm (528-305mm) Saddle: E-bike MDK black Front brake: Sram DB8, 4-piston caliper, Centerline 200 mm single-piece rotor with 6 IS bolts, organic pads with steel carrier Rear brake: Sram DB8, 4-piston caliper, Centerline 200 mm single-piece rotor with 6 IS bolts, organic pads with steel carrier Brake levers: Sram DB8, reach adjustment with tools, lever bushing Rims: Mavic E-Deemax 29, internal width 30 mm, welded, PFP, tubeless ready, 28 spokes Spokes: Mavic double-thick J-bend, contactless lacing Front hub axle: Mavic, Boost 15x110 mm, 6 IS bolts Rear hub axle: Mavic, Boost 12x148 mm, Ratchet ID360 system, 6 IS bolts, XD freehub Front tire: Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, foldable bead Rear tire: Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, foldable bead Cranks: E-bike Race Face Aeffect-R, 160 mm Chainring: Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD Chain: Sram SX Eagle, 12s, Powerlock Rear derailleur: Sram SX Eagle,12s Shift/brake levers: Sram SX Eagle, 12s, X-Actuation 1:1, single click Cassette: Sram PG-1210, 11-50T, 12s Rear hub body: Sram UDH Weight without pedals: 25.3 kg Display: Bosch Intuvia 100 / Bosch Mini Remote / Bosch System Controller Motor: New Bosch Performance Line CX Cruise (25 Km/h) SMART SYSTEM (BDU 384Y) Battery: Bosch Powertube 625Wh *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, SHIFTER AND BRAKES ARE ALREADY MOUNTED

BICYCLE ORBEA RISE LT M10 630 WH The new RISE LT M10 630W will take you to explore rugged and adventurous trails with style and unmatched performance. Thanks to the combination of cutting-edge technology and innovative design, this mountain bike will offer you a unique and thrilling riding experience. BICYCLE ORBEA RISE LT M10 630 WH MAIN FEATURES: Wheel Diameter: 29. Gear Speed: 12. Motor: Shimano. Battery (Wh): 630. Suspension Travel (mm): 160. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame: Orbea Rise OMR 2025, 140mm travel, 29" wheels, Concentric Boost 12x148 Motor: Shimano EP801 Display: N/A Battery: Orbea Internal 630Wh Charger: Orbea 2.Generation eBike Smart charger 42V/2-4A Fork: Fox 36 Float Factory 160 Grip X QR15x110 Kashima Rear Shock: Fox Float X Factory 2-Pos Adjust Evol LV Kashima custom tune 210x55mm Drivetrain: Shimano XT M8100 SGS Shadow Plus Derailleur: N/A Shift Lever: Shimano SLX M7100 I-Spec EV Cog Set: Shimano CS-M7100 10-51t 12-Speed Chain: Shimano M7100 Sprocket: N/A Cranks: N/A Front Brake: Shimano XT M8120 Hydraulic Disc Rear Brake: Shimano XT M8120 Hydraulic Disc Discs: N/A Front Tire: Maxxis Assegai 2.50" 60TPI 3CG/EXO+/TR MaxxGrip Rear Tire: Maxxis Assegai 2.50" 60TPI 3CG/EXO+/TR MaxxGrip Rims: Oquo Mountain Control MC32TEAM, alloy hookless rim, DT350 6IS hub, 32mm internal width, Sapim D-Sprint / Race spokes, 29" Front Wheel: N/A Rear Wheel: N/A Handlebar: OC Mountain Control MC10 Carbon, Rise 20, Width 800 Handlebar Stem: OC Mountain Control MC20, 0° Saddle: Fizik Terra Ridon X5 145mm Seatpost: OC Mountain Control MC22, 31.6mm, Dropper Maximum Allowed Weight: N/A Weight: N/A *PRO-M STORE OFFERS FREE PRE-ASSEMBLY SERVICE FOR THE BIKE: SEATPOST, FORK, SHIFTER, AND BRAKES ARE ALREADY MOUNTED

TRANZX External cable-operated dropper remote for all diameters and internal 34.9 - main features: The vertical actuation replacement lever for Tranz-X dropper remote allows you to maintain full control during your most challenging descents. With its innovative design and ease of use, you can tackle any terrain with confidence and precision. TRANZX External cable-operated dropper remote for all diameters and internal 34.9 - key features: - Replacement vertical actuation lever for Tranz-X dropper posts - Complete with cable and housing PRODUCT CODE 421759012

PAIR OF REPLACEMENT PLUGS FOR BURGTEC PENTHOUSE MK4 PEDAL BICYCLES Pair of replacement caps compatible with BURGTEC PENTHOUSE MK4 PEDALS. ITEM CODE 1479

SRAM GX EAGLE 12V LUNAR GEARSHIFT The SRAM GX EAGLE 12V LUNAR GEARSHIFT enables quick shifting both when climbing and when sprinting to the finish of the stage. It is designed to be mounted with the new 10-52t cassettes but is also compatible with 10-50t versions. TECHNOLOGIES USED: X-HORIZON: To reduce shift effort on the derailleur lever and chain oscillation. X-ACTUATION: Maintains precise and consistent shifting across all gears. X-SYNC: Optimized with the world's best anti-fall technology. ROLLER BEARING CLUTCH TYPE 3: Maximum derailleur stability even on rough terrain. CAGE LOCK: integrated derailleur cage locking. SRAM GX EAGLE 12V LUNAR GEARSHIFT MAIN FEATURES: Compatible with 10-50t and 10-52t cassettes. Compatibility: Sram Eagle 12v (XX1 Eagle, X01 Eagle, GX Eagle). Recommended groupset: GX Eagle. Maximum sprocket: 52 teeth. Roller Bearing Clutch Type 3: Clutch with optimized tension. Cage material: Aluminum. Spring material: Steel. Weight (manufacturer): 299 g. ARTICLE CODE: 00.7518.137.000

SPECIALIZED S161400010 CORONA FATBOY/FUSE/RUZE 28 TEETH BCD 76MM The stout 28T narrow-wide chainring for the original specifications of mountain bike cranksets with an asymmetric spider 76-BCD. Specialized S161400010 main features: Stout 28T narrow-wide chainring for mountain bike cranksets Asymmetric spider 76-BCD for greater durability and strength

BICYCLE SPECIALIZED CHISEL COMP SHIMANO The Chisel is the lightest dual-suspension alloy bike in the world. It is 18.4% lighter than similar models in its category and, thanks to the kinematics and geometry of its bigger sister Epic 8, the Chisel delivers excellent performance on every ride. SPEED METAL: Thanks to D'Aluisio Smartweld, the Chisel boasts the lightest XC aluminum frame in its category. Each frame tube is highly manipulated and features differentiated thicknesses and profiles that provide stiffness where needed—for efficiency, vibration absorption, comfort and optimal control. CAPACITY: with 110mm-travel suspension tuned by Ride Dynamics, the performance pedigree of the Chisel can be traced directly to the Epic 8, our World Cup race machine. The DNA of the advanced suspension kinematics of the Epic 8, the Ride Dynamics-tuned suspensions and the progressively refined geometry on World Cup technical courses can all be found in the Chisel, making it more than capable of handling diverse terrains with confidence and speed. EFFICIENCY: The Chisel is the most efficient bike in its category, thanks to the geometry and kinematics developed for the Epic 8. The advanced seatpost positions the rider in an optimal pedaling position. The optimized anti-squat reduces pedal bob. Put it all together and you’ll understand how the Chisel translates every watt on the pedals into maximum forward motion. SMOOTHER IS FASTER: We designed the Flex Stay struts so the suspension would be at the top of its category, while also eliminating the extra weight and maintenance of joints used in traditional designs. Extensive on-the-ground and lab testing have proven that the Chisel achieved the impossible: the efficiency, control and lightness of the Flex Stay design—common on carbon bikes—with an advanced alloy. HYDROFORMED ALLOY: The one-piece hydroformed seat tube includes the headset and bottom bracket cavity, unlike a traditional alloy bike where these two components are welded. This way, the Chisel shaves off additional material and weight. D'Aluisio Smartweld hydroformed frame with Flip Chip to adjust geometry, 110mm of travel. RockShox SID fork with 120mm travel and Rush Damper. RockShox Deluxe Select+ shock tuned by Ride Dynamics. TranzX dropper seatpost. Shimano SLX 12-speed drivetrain. Cockpit Saddle: Body Geometry Power Sport, steel rails Handlebar: Specialized Alloy, 20 mm rise, Ø 31.8 mm, 760 mm width Grips: Specialized Trail Grips Stem: Specialized, 3D-forged alloy, 4-bolt, 7° rise Seatpost: TranzX Dropper post, Ø 30.9 mm, travel XS-SM: 100 mm, M: 125 mm, L-XL: 150 mm Drivetrain Chainring: 32T Bottom Bracket: Shimano BB-MT501, BSA Cassette: Shimano Deore M6100, 12-speed with Hyperglide+, 10–51T Chain: Shimano Deore M6100, 12-speed with quick link Crankset: Shimano MT-511, 32T chainring Rear Derailleur: Shimano SLX M7100, SGS, 12-speed Shifters: Shimano SLX M7100, 12-speed Frame Frame: Specialized D'Aluisio Smartweld M5 Alloy; hydroformed tubes; Progressive XC geometry; 110 mm travel; internal cable routing; BSA bottom bracket; 12x148 mm spacing; compatible with 30.9 mm dropper post Seat Clamp: Specialized Alloy, Ø 34.9 mm Suspension Fork: RockShox SID, Rush damper, 44 mm offset, 15x110 mm thru-axle, 120 mm travel, Maxle Stealth Rear Shock: RockShox Deluxe Select+, Ride Dynamics tuned, 2-position, rebound adjustment, 190x40 mm Brakes Front Brake: Shimano M6100, 2-piston caliper, hydraulic disc, 180 mm rotor Rear Brake: Shimano M6100, 2-piston caliper, hydraulic disc, 160 mm rotor Wheels & Tires Front Tire: Specialized Ground Control, Control Casing, T5 compound, 29x2.35 Rear Tire: Specialized Fast Trak, Control Casing, T5 compound, 29x2.35 Rims: Specialized Alloy, tubeless ready, 27 mm internal width, disc, 28H Front Hub: Shimano MT410-B, Centerlock, 28H, 15x110 Boost Rear Hub: Shimano MT410-B, Centerlock, 28H, 12x148 Boost, Microspline Tubes: Standard 40 mm PV, fits 29x1.75–2.4 Spokes: Stainless steel, 14G Weight Weight: 12.86 kg (28 lb, 5.6 oz) Measured Size: M (MD)

BICYCLE FOCUS SPINE C 00 Focus SPINE is nimble and lively. This bicycle lures with a mix of breathtaking performance, handling, and irresistible looks. It will be love at first pedal. Step on it on all terrains, from everyday epic to a fast ride after work. THE BIKE IS PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS Frame material: SPINE120, carbon Fork: RockShox RS1, FullSprint Remote, 120 mm, 15 mm QR Predictive Steering Rear shock: RockShox Monarch XX HV, 184/44, customized tuning, travel 120 mm Gearing controls: SRAM XX1, 11 speeds, lever Rear derailleur: SRAM XX1, 11 speeds Cassette: SRAM XG-1195 Crankset: SRAM XX1, PF30 Gearing ratios: F: 32 | R: 10-42 Handlebar: Concept CPX, full carbon Saddle: fi'zi:k Tundra M3 braided, carbon rails Seatpost: RockShox Reverb Stealth, 31.6 mm, 420 mm, 120 mm travel adjustment Brakes: SRAM Guide RSC Discs: 180 mm/180 mm Wheels: DT Swiss XMC1200 Spline, 584-24 Tires: Continental Mountain King 2.4 / 2.2 RaceSport *PRO-M STORE OFFERS FREE PRE-ASSEMBLY SERVICE OF THE BIKE: SEATPOST, FORK, SHIFTER, AND BRAKES ARE ALREADY MOUNTED

TIRE PIRELLI CINTURATO SPORT - 700X28 BLACK The CINTURATO SPORT - 700x28, black, TechWall+ by Pirelli is a reliable and versatile tire, suitable for long distances and/or different terrains. Perfect for weekend road bike rides but also for urban commuting, it ensures safety and grip in all weather conditions. Remember that it is not compatible with Hookless rims, but it is ideal for Training and Commuting uses. main features: Reliable and versatile, suitable for long distances and/or different terrains. Perfect for weekend road bike rides but also for urban commuting. Provides safety and grip in all weather conditions. NOT compatible with Hookless rims. Ideal for Training and Commuting uses.

BICYCLE CANNONDALE SCALPEL HT CARBON 1 The BICYCLE CANNONDALE SCALPEL HT CARBON 1 is an XC front hardtail mountain bike with impressive capabilities, offering everything a HT bike enthusiast could desire. Maximum grip and comfort on uneven terrain, plus balanced and intuitive handling provide the utmost confidence and control even on the most challenging descents. The flat head angle of 66.5° delivers ample stability and control to tackle even the steepest descents. At the same time, the steep seat angle of 74.5° ensures the best possible power transfer on climbs. Additionally, thanks to the Proportional Response design tailored to each size, the seat tube length grows with the frame size. This allows a central riding position on the bike and guarantees unmatched handling and the best traction. The bike is equipped with a SRAM XO Eagle drivetrain and 120mm Lefty Ocho carbon fork with 110 mm travel. CANONDALE SCALPEL HT CARBON 1 MAIN FEATURES: Use: XC. MTB hardtail. SRAM XO Eagle drivetrain. Lefty 120 carbon fork with 110 mm travel. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Scalpel HT Carbon, Proportional Response Design, PF30-83, tapered head tube, 55mm chainline, Speed Release 12mm thru axle w/UDH hanger. FORK: Lefty Ocho 120 Carbon, 110mm, Chamber Damper with remote lockout, OppO Spring System, tapered steerer, 50mm offset. CRANKSET: SRAM Eagle. BOTTOM BRACKET: SRAM PF30 MTB83. DERAILLEUR: SRAM Eagle. CASSETTE: SRAM Eagle. CHAIN: SRAM Eagle. WHEELS: HollowGram 25, Superlight Hi-Impact Carbon, 28h, 25mm IW, tubeless ready TIRES: (F) Maxxis Aspen WT 29 x 2.4", EXO Protection, tubeless ready / (R) Maxxis Recon Race WT 29 x 2.4", EXO Protection, tubeless ready. HUBS: (F) HollowGram Lefty 60 / (R) HollowGram w/DT Swiss Star Ratchet internals, 12x148mm thru-axle. RIMS: DT Swiss Competition Race, straight-pull. BRAKES: SRAM Level TLM hydraulic disc, 160/160mm CenterLine rotors. HANDLEBAR: Cannondale 1 Flat, Carbon, 31.8mm, 9° back, 760mm. STEM: Cannondale 1, 7075 Alloy, 1-1/8", 31.8, 7°. GRIPS: Cannondale XC Silicone. SADDLE: Prologo Dimension NDR, TiROx rails. SEAT POST: C1 Carbon, 27.2x400mm. *PRO-M STORE OFFERS FREE PRE-ASSEMBLY SERVICE FOR THE BIKE: SEAT POST, FORK, DRIVETRAIN AND BRAKES ARE ALREADY MOUNTED

LEFT SHELL MONDRAKER COMPATIBLE WITH MODELS WITH BOSCH 4TH GEN MOTOR Cap compatible with all Mondraker models with Bosch Gen4 motor from 2020. Screws not included. ITEM CODE 099.20022

TIRE CONTINENTAL CONTACT PLUS 28X1.6 BLACK BLACK REFLECTIVE WIRE SKIN 360-degree touring An all-rounder that offers everything you expect from a comfortable touring tire. It is an all-rounder for both asphalt and off-road, that adequately completes every touring bike. Thanks to puncture protection no one will be left stranded on the roadside. In this updated version the tread has been improved. It carries ECE-R75 certification. TIRE CONTINENTAL CONTACT PLUS 28X1.6 BLACK BLACK REFLECTIVE WIRE SKIN main features: Tread-Sidewall: black/black Reflex Group: CT Premium Technology: SafetyPlusBreaker Weight: 1035 Made in: [informazione mancante]

PRESTA VALVE EXTENDER TOPEAK 40MM Engineered from durable aerospace-grade aluminum alloy, it allows extending the Presta valve by 40 mm, assisting tire inflation. The aluminum alloy key is sturdy and designed to easily tighten or remove the Presta valve core and the extender. PRESTA VALVE EXTENDER TOPEAK 40MM MAIN FEATURES: CONTENT 2 aluminum alloy extenders for valves 1 aluminum alloy valve key for valve SIZE 5 x 0.6 x 0.6 cm WEIGHT 1.8 g (40mm) ITEM CODE: TKTFV06

ROCKY MOUNTAIN OVERTIME CONVERSION PACK KIT FOR DYNAMO 3 Compatible with: Altitude Powerplay Alloy 2022 Altitude Powerplay Carbon 2022 Instinct Powerplay Alloy 2022 Instinct Powerplay Carbon 2022 ARTICLE CODE 1812032

CORONA SHIMANO DOPPIA DURA-ACE MX FOR DOUBLE 55/54/42T 11S Shimano 42-tooth sprocket, 11 speeds, hollowglide. Aluminum. Bolt circle: 110 mm.

TORX WRENCH BOSCH T40 PLUS 1/4" SOCKET FOR 4TH GENERATION MOTOR SCREWS The TORX T40 Plus Bit key, 1/4" is the ideal accessory to tackle mechanical challenges with precision and reliability. Built to last, this key is designed to deliver optimal performance even in the most demanding situations. With a 1/4" shank, it is compatible with a wide range of tools, ensuring maximum versatility. Perfect for tackling Bosch Gen4 engine screws and ensuring precise and safe work in every situation. TORX WRENCH BOSCH T40 PLUS 1/4" SOCKET FOR 4TH GENERATION MOTOR SCREWS MAIN FEATURES: High-quality TORX T40 Plus key 1/4" shank for greater compatibility Ideal for Bosch Gen4 engine screws Offers precision and reliability in every use ITEM CODE 546169175

PEATY'S SEALANT LIQUID - TUBELESS TYRE SEALANT HOLESHOT BIOFIBRE 5L The biodegradable latex for tubeless Peaty's - Tubeless Tyre Sealant Holeshot BioFibre 5L is the ecological choice for your bike. With micro-particles in natural fiber, this sealant offers excellent performance while respecting the environment. The 5L can provides a good supply for many adventures in the saddle. PEATY'S SEALANT LIQUID - TUBELESS TYRE SEALANT HOLESHOT BIOFIBRE 5L key features: Biodegradable tubeless sealant with micro-particles in natural fiber 5L can for long-lasting use and many applications

YETI ARC BICYCLE T KIT C2 The Arc has returned, evoking all the nostalgia, whistles, and screams of years past. It’s your go-to with immediate feedback for any trail. Also show them your singletrack, pump track, and bikepacking route. It has a story to tell and a new one to make. And it’s already eager. TECHNICAL SPECIFICATIONS Frame Carbon fiber frame, TURQ series Pressfit BB92 Internal cable routing Dropout BOOST 148 mm x 12 mm Universal derailleur hanger (UDH) Thru-axle Fork FOX FACTORY 34 FIT4/130MM Frame Material TURQ SERIES Weight 26.1 lbs Wheels CRANK BROTHERS SYNTHESIS ENDURO 30MM Drivetrain SRAM GX EAGLE Controls SRAM GX EAGLE Crankset SRAM GX EAGLE 32T 170MM Bottom Bracket SRAM DUB BB92 Cassette SRAM GX EAGLE 1275 10-52 Chain SRAM GX EAGLE Brakes SRAM LEVEL TL Discs SRAM CENTERLINE 180/SRAM CENTERLINE 180 Saddlepost ONEUP DROPPER POST 31.6MM SM: 180MM, MD-XL: 210MM Front Tire MAXXIS MINION DHF 2.6 EXO Rear Tire MAXXIS REKON 2.6 EXO Headset Series CANE CREEK 40 INTEGRATED Handlebar BURGTEC RIDE WIDE ALLOY ENDURO 35X760MM Handlebar Stem BURGTEC ENDURO MK3 35X50MM Grips ODI ELITE PRO Seat SILVERADO CUSTOM

SPECIALIZED S185300020 BOLT SWAT HEADSET/QUICK-RELEASE DERAILLEUR 90MM Length 90mm Eases installation and removal of anchor bolts and chain pins Item code S185300020

SRAM TRIGGER X01 DH POST 7V The SRAM TRIGGER X01 DH POST 7V features X-ACTUATION technology for fast and precise shifts. With ZERO LOSS, the cable engages instantly, allowing rapid gear changes. Thanks to the multi-adjustable controls, it is easy to move from any position. The aluminum shift lever cover and the forged aluminum lever provide the strength and durability needed to conquer the most challenging terrains. SRAM TRIGGER X01 DH POST 7V MAIN FEATURES: X-ACTUATION technology. ZERO LOSS technology immediately engages the cable and enables a very fast shift. Body, trigger, and mounting hardware in aluminum. Compatible only with SRAM X0 DH 7-speed derailleurs. Matchmaker X compatible. PART NUMBER M00.7018.401.001

MAGURA DISC BRAKE ADAPTER QM 40 PM-PM 180MM PM 6" - 160MM PM 5" +20MM The QM40 DISC BRAKE CALIPER ADAPTER from Magura is designed to offer maximum compatibility and performance for your braking system. With this adapter, you can easily mount the disc brake caliper on your frame without issues, ensuring powerful and secure braking on any terrain. MAGURA DISC BRAKE ADAPTER QM 40 PM-PM 180MM PM 6" - 160MM PM 5" +20MM MAIN FEATURES: Compatible with Post Mount and Post Mount (standard) fittings Made with high-quality materials to ensure strength and durability over time Easy to install and adjust for perfect caliper centering Lightweight and compact design to avoid weighing down your road or mountain bike ARTICLE CODE 525189201

HT AE12 PEDALS Kids BMX pedals made of aluminum CNC machined. Good support base, with sealed internal bearings and replaceable pins on both sides. HT AE12 PEDALS MAIN FEATURES: Perfect for children. Made of CNC machined aluminum. Size: 88 X 96 X 17 cm. Replaceable pins. Weight (approx.): 345 g.

BOSCH ABS WIRING, 1400 MM (BCH3622_1400) - SMART SYSTEM The 1400 mm ABS wiring (BCH3622_1400) from Bosch is designed to deliver reliable and durable performance. With its smart design and length of 1400 mm, this wiring is perfect for ensuring optimal operation of the ABS system on your bike. BOSCH ABS WIRING, 1400 MM (BCH3622_1400) - SMART SYSTEM key features: Designed to ensure reliable and durable performance Length of 1400 mm for optimal installation Compatible with Bosch Smart System product code 546190014