PARK TOOL
HEAVY DUTY FORGED STEEL TIRE LEVE...
€28,90
€45,70
When a tire bead just won't budge and nothing else is up to the task, reach for the Park Tool TL-5, a set of two heavy duty forged steel tire levers. A full 203 mm long, these levers offer superior leverage and strength to install and remove even the toughest tire and rim combinations.
The forged steel construction and generous length turn every movement into effective force on the bead. The TL-5 is made for the jobs where ordinary levers are not enough: particularly stiff bicycle tires, as well as motorcycle tires. It is the tool to keep within reach at the workbench when a gravity wheel resists every attempt and you need a long, strong lever to finish the job without effort.
Where to use Park Tool TL-5 tire levers
Downhill and freestyle tires, notoriously hard to remove.
Very tight tire and rim combinations.
Motorcycle tires.
Workshops that regularly deal with demanding wheels.
Why choose Park Tool TL-5
Forged steel for maximum strength.
203 mm length for superior leverage.
Set of two levers to work the bead in sequence.
A workshop tool built for the hardest jobs.
For tires that resist everything there is the Park Tool TL-5 forged steel tire lever set: strength and leverage when you really need them.
TECHNICAL SPECIFICATIONS
GeneralCode: TL-5Brand: Park ToolType: Heavy duty tire lever set
DimensionsDimensions (each lever): 203 x 28 x 5 mmWeight (each lever): 167 g
MaterialsMaterial: Forged steel
CompatibilityUse: Bicycle and motorcycle tires, including downhill and freestyle tires
ContentsContents: 2 tire levers
PARK TOOL
JAW COVER SET FOR PCS REPAIR STAN...
€7,90
€12,10
The Park Tool 2860 is the replacement jaw cover set for the PCS Home Mechanic repair stands: PCS-9.2, PCS-9.3, PCS-10.2, PCS-10.3 and PCS-12.2. They are the parts of the clamp that touch the seatpost or tube and should be replaced when worn to keep a secure grip.
The pack contains two covers, nominally 7 cm long, and four circlips for installation. They are almost the same shape as the 1960 covers for the professional clamps but thicker, which allows the PCS stands to clamp even thin tubes, down to a minimum diameter of 7/8".
Where to fit the Park Tool 2860 jaw covers
Park Tool PCS-9.2 and PCS-9.3 Home Mechanic stands
Park Tool PCS-10.2 and PCS-10.3 Deluxe Home Mechanic stands
Park Tool PCS-12.2 bench mount stand
Why choose Park Tool 2860
Original replacement part made for the PCS stand clamps
Extra thickness to clamp thin tubes too
Retaining circlips included
The Park Tool 2860 jaw cover set brings your PCS stand clamp back to full efficiency.
TECHNICAL SPECIFICATIONS
GeneralCode: 2860Type: Replacement repair stand jaw covers
DimensionsNominal length: 7 cmMinimum clampable tube diameter: 7/8"
CompatibilityStands: Park Tool PCS-9.2, PCS-9.3, PCS-10.2, PCS-10.3, PCS-12.2
ContentsJaw covers: 2Retaining circlips: 4
PARK TOOL
DIAMOND ABRASIVE ADAPTER FOR CARB...
€194,90
€303,40
The Park Tool 2197 is the diamond abrasive adapter for carbon frames that adds on to the DT-5 and DT-5.2 disc brake mount facing sets. It lets you face caliper mounts on carbon frames and forks, where the standard cutter is not suitable.
The adapter sits between the DT-5.2 cutter and the brake mount and works by abrasion thanks to a brazed-on diamond grit surface. According to Park Tool it is over 100 times more durable and effective on carbon than the cutter included in the set, and it makes the mounting surface flat and perpendicular to the rotor.
How to use the Park Tool 2197 adapter
On post mount and flat mount brake mounts
On carbon only, including mounts with aluminium inserts (hybrid carbon/aluminium surface)
Regularly apply water or a similar solution to the working surface
For aluminium, steel and titanium mounts use the DT-5.2 2171 cutter
Why choose Park Tool 2197
Abrasive machining suited to carbon fibre
Integrates with the DT-5.2 set already in the workshop
Long-lasting diamond surface
The Park Tool 2197 diamond abrasive adapter completes the DT-5.2 so you can work safely on carbon frames too.
TECHNICAL SPECIFICATIONS
GeneralCode: 2197Type: Abrasive adapter for disc brake mount facing
MaterialsWorking surface: Brazed-on diamond grit
CompatibilitySet: Park Tool DT-5 and DT-5.2Mounts: Carbon post mount and flat mount
PARK TOOL
NARROW TIP TIRE LEVER SET 3 PCS P...
€3,90
€6,20
The Park Tool TL-1.2C is a set of three light, smooth tire levers designed for removing and installing bicycle tires in the workshop and out on the road. The narrow, thick tip slips easily under the bead of just about any bicycle tire, including tubeless systems.
Each lever is made of a strong, lightweight material and uses a proven profile that lifts the tire away from the rim. The spoke hook holds the lever in place when multiple levers are needed, leaving your hands free to insert the second and third lever. When the job is done, the three levers snap together into a compact set that is easy to store.
How to use Park Tool TL-1.2C tire levers
Insert the narrow tip between rim and tire bead and lever outwards.
Hook the lever onto a spoke so it stays in place.
Insert the second lever a little further along and, if the bead is very tight, add the third.
Slide the last lever along the rim until the bead is completely free.
Why choose Park Tool TL-1.2C
Narrow, thick tip that enters easily, even on tubeless tires.
Three levers in the set, useful when the bead just won't come off.
Spoke hook on every lever for tidy, secure work.
Levers snap together for a saddlebag, jersey pocket or tool roll.
Just 37 grams for the whole set.
Light, strong and always ready: the Park Tool TL-1.2C tire lever set is the practical choice for fixing a flat without wasting time, at the workbench or at the roadside.
TECHNICAL SPECIFICATIONS
GeneralCode: TL-1.2CBrand: Park ToolType: Tire lever setTip: Narrow and thick, also suitable for tubeless systemsSpoke hook: Yes
DimensionsSet dimensions: 114.3 x 15.2 x 44.5 mmSet weight: 37 g
ContentsContents: 3 tire levers
PARK TOOL
REPAIR STAND BASE FOR POWER LIFT ...
€534,90
€832,50
The Park Tool 135-33 is the Power Lift repair stand base dedicated to the PRS-33 and PRS-33.2, the workshop stands with assisted height adjustment. It provides stable support while you work but remains movable, so the station can be repositioned whenever the workshop layout changes.
The plate measures 58 x 89 cm, is 1.2 cm thick and weighs 52 kg. Unlike the 135 base for the PRS-2 series, it features built-in levelling screws that compensate for uneven floors and keep the stand squarely engaged with the floor, which matters on a stand that raises and lowers with the bike mounted.
Where to use the Park Tool 135-33 base
Under Park Tool Power Lift PRS-33 and PRS-33.2 stands
In workshops with floors that are not perfectly level, thanks to the levelling screws
When the stand must be free-standing, with no floor fixing
Why choose Park Tool 135-33
Built-in levelling screws for always square floor contact
52 kg of mass to counter sway while working
1.2 cm low profile, specific to the Power Lift series
The Park Tool 135-33 Power Lift repair stand base is the natural complement to the PRS-33 for a stable, level workstation clear of the wall.
TECHNICAL SPECIFICATIONS
GeneralCode: 135-33Type: Workshop repair stand base with levelling screws
DimensionsSize: 58 x 89 x 1.2 cmWeight: 52 kg
CompatibilityStands: Park Tool Power Lift PRS-33 and PRS-33.2
PARK TOOL
REPAIR STAND BASE FOR PRS-2 WORKS...
€463,90
€721,90
The Park Tool 135 is the repair stand base designed for the professional double-arm workshop stands of the PRS-2 series. It turns the stand into a free-standing workstation that stays stable while you work, yet can be moved around the workshop when needed.
It is a flat, low-profile plate measuring 58 x 89 cm and just 1.2 cm thick, and its 52 kg lower the centre of gravity of the whole stand. No floor fixing is required: the weight of the base counters sway and tipping, even with the bike clamped off-centre and when using long wrenches or high force.
Where to use the Park Tool 135 repair stand base
Under Park Tool PRS-2 series double-arm stands, such as PRS-2, PRS-2 OS, PRS-2.2, PRS-2.3 and PRS-2.4
In workshops where the stand must stay clear of walls or benches
When you want to reorganise the work area without drilling the floor
Why choose Park Tool 135
52 kg of mass at floor level for the stability of a fixed station
Only 1.2 cm high, so it stays out of the way under the bike
Original base designed by Park Tool for its own double-arm stands
With the Park Tool 135 repair stand base, your double-arm stand becomes a solid, independent workstation ready for daily work.
TECHNICAL SPECIFICATIONS
GeneralCode: 135Type: Workshop repair stand base
DimensionsSize: 58 x 89 x 1.2 cmWeight: 52 kg
CompatibilityStands: Park Tool PRS-2 series double-arm stands (PRS-2, PRS-2 OS, PRS-2.2, PRS-2.3, PRS-2.4)
PARK TOOL
WORKSHOP REPAIR STAND BASE PRS-3 ...
€292,90
€455,10
The Park Tool 130 is the workshop repair stand base that provides a stable yet movable foundation for Park Tool single-arm professional repair stands, starting with all PRS-3 models. With its 31 kg spread over a 57 x 57 cm plate, it keeps the stand steady without having to bolt it to the floor. A heavy base is also a guarantee of safety: a stand that does not wobble protects both the bike and the person working on it.
In the workshop it is not always possible, or convenient, to anchor the stand to the floor with bolts. The 130 solves the problem with mass: the weight concentrated in a plate just 1.2 cm high lowers the centre of gravity of the assembly and resists tipping even when the bike is clamped out on the arm and you are working hard on the bottom bracket, headset or pedals. At the same time the base remains movable: the workstation can be repositioned when the workshop layout changes or when you need space for special jobs.
The low profile of the plate takes up little room and leaves the area around the mechanic's feet clear, so you can move around the bike without tripping. It is the ideal solution for professional workshops, service departments and well-equipped garages that want the stability of a fixed stand while keeping the freedom to move it.
Which repair stands the Park Tool 130 base fits
PRS-3.2-1 and PRS-3.2-2 single-arm repair stands
PRS-3.3-1 and PRS-3.3-2 single-arm repair stands
PRS-3 OS-1 and PRS-3 OS-2 Deluxe repair stands
PRS-23 bottom bracket cradle repair stand
PRS-30LB mechanical lift repair stand
THP-1 workstation mounting post
Why choose the Park Tool 130
31 kg of mass for stability comparable to a fixed stand
57 x 57 cm plate with a low 1.2 cm profile
No anchor bolts: it moves when you need to reorganise the workshop
Compatible with the entire PRS-3 series and with PRS-23, PRS-30LB and THP-1
Designed by Park Tool as the original base for its own stands
If your single-arm repair stand needs to stay steady under every effort without being fixed to the floor, the Park Tool 130 repair stand base is the foundation on which to build your workstation.
TECHNICAL SPECIFICATIONS
GeneralItem code: 130Type: base for single-arm workshop repair stand
DimensionsOverall size: 57 x 57 x 1.2 cm (22.5" x 22.5" x 0.5")Weight: 31 kg (68 lb)
CompatibilityRepair stands: PRS-3.2-1, PRS-3.2-2, PRS-3.3-1, PRS-3.3-2, PRS-3 OS-1, PRS-3 OS-2, PRS-23, PRS-30LBMounting post: THP-1
PARK TOOL
REPAIR STAND WORK TRAY PARK TOOL 106
€43,99
€74,40
The Park Tool 106 is the repair stand work tray that keeps tools, lubricants and spare parts close at hand while you work on the bike. It mounts on the upright of the Park Tool repair stand and turns the stand into a real, tidy and efficient workstation. The tray sits at the right height, right next to the bike, and clears the bench of everything you need during the job.
The tray is divided into two deep-walled compartments that hold wrenches, hex keys, bolts and small parts even when you move quickly around the bike. A dedicated holder keeps the lube bottle upright, while an integrated tab system lets you hang a plastic shopping bag to use as a bin for rags, cut zip ties and packaging. The tray also has receiver pods for the Park Tool PTH-1 paper towel holder (sold separately), handy for always having paper available during cleaning and lubrication.
On more recent stands the 106 mounts directly; for older models or uprights of a different diameter, Park Tool offers dedicated collars, listed below, that allow it to be fitted to most of the range.
Which repair stands the Park Tool 106 tray fits
Direct fit: PCS-10, PCS-10.2, PCS-10.3, PCS-11, PRS-15, PRS-22.2, PRS-25 and PRS-20 and PRS-21 from 2012
With 1707.2 collar: PRS-20 and PRS-21 up to 2011, PCS-1 after June 1996, PCS-4 (upright before 2003 or lower upright from 2003), lower upright of PCS-4-1 and PCS-4-2
With 106-AC collar: PCS-9, upper upright of PCS-1 from 2004, of PCS-4 from 2003 and of PCS-4-1 and PCS-4-2
With PCS-EXT extension and 106-AC collar: PCS-1 from 1996 to 2004 and PCS-4 from 2003
With 2848A collar: PCS-9.2 and PCS-9.3
With 2737 collar: PRS-22
Why choose the Park Tool 106
Two deep compartments that stop tools and small parts from falling
Integrated lube holder
Tabs for hanging a trash bag
Ready for the PTH-1 paper towel holder
Wide compatibility with Park Tool repair stands, direct or via collars
Less time spent looking for the right tool, fewer bolts on the floor: the Park Tool 106 repair stand work tray is the accessory that completes the stand, in the workshop as in the home garage.
TECHNICAL SPECIFICATIONS
GeneralItem code: 106Type: repair stand work trayCompartments: 2, deep-walledFeatures: lube holder, tabs for trash bag, receiver pods for PTH-1 paper towel holder
CompatibilityDirect fit: PCS-10, PCS-10.2, PCS-10.3, PCS-11, PRS-15, PRS-20 and PRS-21 (from 2012), PRS-22.2, PRS-25With optional collars: 1707.2, 106-AC, 2848A, 2737 and PCS-EXT extension for PCS-1, PCS-4, PCS-9, PRS-20, PRS-21 and PRS-22
PARK TOOL
MICRO-ADJUST CLAMP FOR PCS-4, PRS...
€140,90
€220,41
The Park Tool 100-5D is the micro-adjust repair stand clamp designed for the Park Tool PCS-4, PRS-5, PRS-6 and PRS-7 repair stands and for the more recent versions of the PCS-1. It is the most direct way to bring a stand from these series back to full efficiency, with a repair stand clamp that holds round and aero tubes from 23 to 76 mm.
Many Park Tool repair stands work for years, and the first part to wear out is the clamp. The 100-5D uses the cam-actuated micro-adjust clamping system: you set the jaw opening to the tube size, close the lever and the clamping comes in progressively, without jolts. Continuous adjustment lets you find the right pressure for every frame, including the thinnest carbon tubes, which are not crushed. Opening the lever releases the bike in an instant. A new clamp also means intact jaw covers and a mechanism that works smoothly again, essential conditions for working on painted or carbon frames without leaving marks.
Construction follows Park Tool standards for shop use: powder-coated, precision-machined die-cast aluminum main body, narrow 70 mm tall jaws and jaw covers replaceable with part 1960. The slim jaws slip into tight spaces and grip even the shortest seat posts, common on modern bikes with compact frames.
How to check the compatibility of the Park Tool 100-5D clamp
PCS-4, including PCS-4-1 and PCS-4-2
PRS-5, PRS-6 and PRS-7 made after June 1996, with composite top tube
PCS-1 made after 2002: check for the embossed "939" under the lever
For PRS-5 stands made before June 1996, the correct clamp is the Park Tool 100-3D
Why choose the Park Tool 100-5D
Original replacement to extend the life of Park Tool stands already in use
Cam-actuated micro-adjust: progressive clamping and instant release
Clamping range from 23 to 76 mm on round tubes and aero profiles
Narrow 70 mm jaws, also suited to short seat posts
Powder-coated die-cast aluminum body and replaceable jaw covers (1960)
Before installing, check the model and production year of your stand: once fitted, the Park Tool 100-5D micro-adjust clamp gives the stand back a precise, fast grip that respects the frame.
TECHNICAL SPECIFICATIONS
GeneralItem code: 100-5DType: repair stand clamp with cam-actuated micro-adjustCompatible tubes: round and aero
DimensionsClamping range: 23-76 mm (7/8"-3")Jaw height: 70 mm (2.75")
MaterialsBody: die-cast aluminum, precision-machined and powder-coatedJaw covers: replaceable (Park Tool part 1960)
CompatibilityRepair stands: PCS-4 (PCS-4-1, PCS-4-2), PRS-5, PRS-6, PRS-7 made after 06/1996 with composite top tubePCS-1: made after 2002 ("939" embossed under the lever)
PARK TOOL
MICRO-ADJUST CLAMP FOR PCS-10, PC...
€140,90
€219,91
The Park Tool 100-25D is the micro-adjust repair stand clamp fitted to the Park Tool PCS-10, PCS-11 and PCS-12 repair stands and to the PRS-25 race stand. It is the original replacement when your stand's clamp is worn, and a real upgrade for anyone who wants to hold the bike precisely on round and aero tubes from 23 to 76 mm.
Clamping is handled by the Park Tool cam-actuated micro-adjust system: first you set the jaw opening to the tube size, then you close the cam lever, which completes the clamping with progressive, controlled force. Adjustment is infinite, with no fixed positions, so you can dose the pressure even on carbon tubes and reduce the risk of crushing them. Opening the lever releases the bike immediately: a real advantage when the bike goes on and off the stand several times in the same work session.
The main body is powder-coated, precision-machined die-cast aluminum, built for everyday shop use. The jaws are narrow and 70 mm tall: they fit where space is tight and grip short seat posts on modern frames securely. The jaw covers are replaceable with Park Tool part 1960, so the clamp keeps a clean and secure grip over time.
Which repair stands the Park Tool 100-25D clamp fits
Park Tool PCS-10, PCS-11 and PCS-12 home mechanic repair stands
PRS-25 portable race stand
PRS-15 stand, with the Park Tool 1951-15 adapter stud
Road, gravel and MTB frames with round or aero tubes from 23 to 76 mm
Why choose the Park Tool 100-25D
Cam-actuated micro-adjust: controllable pressure and quick lever release
Wide clamping range, from 23 to 76 mm, on round and aero tubes
Narrow 70 mm jaws for short seat posts and tight clamping areas
Powder-coated, precision-machined die-cast aluminum body
Replaceable jaw covers (Park Tool 1960) for a consistently effective grip
A shop tip: whenever possible, clamp the bike by the seat post rather than the frame tubes, and set the opening so the lever closes with a firm push but without forcing it. To bring your Park Tool stand back to day-one precision, the Park Tool 100-25D micro-adjust clamp is the original choice.
TECHNICAL SPECIFICATIONS
GeneralItem code: 100-25DType: repair stand clamp with cam-actuated micro-adjustCompatible tubes: round and aero
DimensionsClamping range: 23-76 mm (7/8"-3")Jaw height: 70 mm (2.75")
MaterialsBody: die-cast aluminum, precision-machined and powder-coatedJaw covers: replaceable (Park Tool part 1960)
CompatibilityRepair stands: PCS-10, PCS-11, PCS-12, PRS-25PRS-15: with Park Tool 1951-15 adapter stud
PARK TOOL
3/8" DRIVE RATCHET HANDLE PARK TO...
€24,90
€39,30
The Park Tool SWR-8 is the 3/8" drive ratchet handle designed to drive any 3/8" socket, bit or tool with strength and efficiency. This 3/8" drive ratchet handle is the everyday handle for the workbench, including Park Tool bottom bracket tools. It is one of those tools that, once in the workshop, you use on every job.
It is forged from alloy steel and chrome plated to handle everyday workshop use. The mechanism is reversible: with a single ratchet you can install and remove both standard and reverse-threaded fasteners without changing tools. The quick-release button lets you swap sockets in an instant, while the 200 mm (8") length keeps it easy to handle when the bike is in the stand. The ratchet saves you from repositioning the wrench at every turn, so work stays faster and more precise. Its compact format also makes it the natural partner of a breaker bar when you need to alternate working speed and force.
How to use the Park Tool SWR-8 ratchet handle
With 3/8" sockets and bits for everyday tightening.
With Park Tool bottom bracket tools featuring a 3/8" drive.
On standard or reverse-threaded fasteners, by reversing the direction.
For quick socket changes thanks to the release button.
At the bench or with the bike in the stand, where a compact handle is needed.
Why choose Park Tool SWR-8
Forged alloy steel for strength and efficiency.
Chrome plating designed for everyday workshop use.
Reversible ratchet for standard and reverse threads.
Quick-release button to change sockets fast.
Compatible with any 3/8" socket, bit or tool.
200 mm length, compact and easy to handle.
If you use 3/8" sockets and tools in your workshop, the Park Tool SWR-8 3/8" drive ratchet handle is the reliable handle to keep within reach: sturdy, reversible and ready for every job, from simple tightening to bottom bracket removal. A solid base on which to build your set of 3/8" drive tools.
TECHNICAL SPECIFICATIONS
GeneralCode: SWR-8Type: reversible ratchet handleDrive: 3/8" squareFeatures: reversible, quick-release button
DimensionsLength: 200 mm (8")
MaterialsMaterial: forged alloy steelFinish: chrome plated
CompatibilityCompatible tools: any 3/8" drive socket, bit or tool, including Park Tool bottom bracket tools
PARK TOOL
SPOKE WRENCH PARK TOOL SW-6 FOR 3...
€6,90
€11,10
The Park Tool SW-6 is the spoke wrench dedicated to nipples with 3.70 mm (0.146 in) wrench flats. When a wheel uses nipples of this size, the Park Tool SW-6 spoke wrench for 3.70mm nipples lets you adjust tension and true the rim with the exact tool instead of making do with a wrench of a nearby size.
This size is also found on some hub-drive e-bikes, where having the correct wrench makes all the difference. The SW-6 follows the Park Tool spoke wrench design that has been in production for over fifty years: a heat-treated, nickel-plated body built to last, a vinyl dip that shows the size at a glance, and manufacturing in the USA.
How to use the Park Tool SW-6 spoke wrench
Measure the nipple flats before you start: the SW-6 is sized for 3.70 mm only.
Essential on hub-drive e-bikes that use 3.70 mm nipples.
Useful for lateral and radial truing, tension touch-ups and routine wheel checks.
The coating colour lets you spot the size instantly among the other spoke wrenches on the bench.
Why choose Park Tool SW-6
Grip sized to 3.70 mm nipples, so you work without rounding off their corners.
Heat treatment and nickel plating for a tool that stands up to daily workshop use.
A design proven for over half a century in workshops around the world.
Made in the USA with Park Tool professional quality.
If hub-drive e-bikes come through your workshop, the Park Tool SW-6 spoke wrench for 3.70 mm nipples is the size to keep within reach.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-6Type: spoke wrenchMade in: USA
MaterialsFinish: heat treated and nickel platedCoating: vinyl dip to identify the size
CompatibilityNipples: 3.70 mm (0.146 in) wrench flatsTypical use: some hub-drive e-bikes (always check the size)
PARK TOOL
SPOKE WRENCH PARK TOOL SW-5 FOR D...
€6,90
€10,40
The Park Tool SW-5 is the spoke wrench dedicated to DT Swiss Tricon nipples. The Park Tool SW-5 spoke wrench for DT Swiss Tricon nipples matches the proprietary six-spline pattern of these nipples, so you can work on Tricon wheels with the correct grip.
It belongs to Park Tool's long-standing family of spoke wrenches, in the range for over forty years and appreciated by mechanics worldwide for its simple design and professional quality. The SW-5 is made in the USA, heat treated and nickel plated for long service, with a vinyl coating that identifies the wrench at a glance.
Where to use the Park Tool SW-5 spoke wrench
DT Swiss Tricon wheels with six-spline nipples.
Spoke tensioning and truing of Tricon wheels.
Jobs where a traditional spoke wrench does not fit the nipple profile.
Why choose Park Tool SW-5
Profile dedicated to the proprietary DT Swiss Tricon six-spline pattern.
Heat treated and nickel plated for a long workshop life.
Vinyl coating to recognise it instantly among other spoke wrenches.
Made in the USA with Park Tool professional quality.
If DT Swiss Tricon wheels come through your workshop, the Park Tool SW-5 spoke wrench for DT Swiss Tricon nipples is the dedicated tool to work on them correctly.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-5Type: spoke wrench for splined nipplesMade in: USA
MaterialsFinish: heat treated and nickel platedCoating: vinyl, to identify the wrench
CompatibilityNipples: DT Swiss Tricon with proprietary 6-spline pattern
PARK TOOL
FOUR-SIDED SPOKE WRENCH PARK TOOL...
€7,99
€11,10
The Park Tool SW-42 is the four-sided spoke wrench for nipples with 3.45 mm wrench flats. The Park Tool SW-42 four-sided spoke wrench for 3.45 mm nipples has the same size as the classic SW-2, but its head grips the nipple on four sides instead of three.
Design and materials are those of the classic three-sided Park Tool spoke wrenches; the difference is the four-sided shape, which adds strength and support to keep the wrench from slipping and the nipple from deforming. It is made in the USA, heat treated and nickel plated, with a vinyl coating that shows the size at a glance.
SW-42 or SW-2: which 3.45 mm spoke wrench to choose
Same size: both work on 3.45 mm (0.136") nipples.
The SW-2 is the classic three-sided wrench; the SW-42 has a four-sided head.
The four-sided grip gives more support and helps avoid deforming the nipple.
This size is found on many department store and low-to-midrange bikes: always measure the nipple before working.
Why choose Park Tool SW-42
Four-sided head for more strength and support on the nipple.
Reduces slipping and deformation compared to a three-sided wrench.
Heat treated and nickel plated for a long workshop life.
Vinyl coating that identifies the size immediately.
If you want the SW-2 size with a more secure grip, the Park Tool SW-42 four-sided spoke wrench for 3.45 mm nipples is the upgrade to keep on your bench.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-42Type: four-sided spoke wrenchEquivalent to: Park Tool SW-2 (three-sided version)Made in: USA
MaterialsFinish: heat treated and nickel platedCoating: vinyl, to identify the size
CompatibilityNipples: 3.45 mm (0.136") wrench flatsTypical use: department store and low-to-midrange bikes
PARK TOOL
SPOKE WRENCH PARK TOOL SW-3 FOR 3...
€7,99
€10,39
The Park Tool SW-3 is the spoke wrench sized for nipples with 3.96 mm wrench flats. With the Park Tool SW-3 spoke wrench for 3.96 mm nipples you can adjust tension and true wheels fitted with nipples of this size.
Park Tool spoke wrenches have been in production for over fifty years and are still a favourite of mechanics around the world. Each SW-3 is made in the USA, heat treated and nickel plated for long service. The vinyl coating shows the size at a glance, so you find the right wrench on the bench straight away.
Where to use the Park Tool SW-3 spoke wrench
Select Shimano wheels that use 3.96 mm nipples.
Hub-drive e-bikes that use this size.
"Heavy duty" bike wheels.
Always measure the nipple flats before working: the SW-3 is designed for 3.96 mm only.
Why choose Park Tool SW-3
Precisely sized for 3.96 mm nipples to reduce the risk of rounding them.
Heat treated and nickel plated for a long life in the workshop.
Vinyl coating that identifies the size without hesitation.
Made in the USA with Park Tool professional quality.
If you work on hub-drive e-bikes or heavy duty bikes, the Park Tool SW-3 spoke wrench for 3.96 mm nipples is the size your kit cannot do without.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-3Type: spoke wrenchMade in: USA
MaterialsFinish: heat treated and nickel platedCoating: vinyl, to identify the size
CompatibilityNipples: 3.96 mm (0.156") wrench flatsTypical use: select Shimano wheels, hub-drive e-bikes, heavy duty bikes
PARK TOOL
INTERNAL NIPPLE SPOKE WRENCH 6.0M...
€9,90
€15,50
The Park Tool SW-19 is the spoke wrench designed for wheels with internal nipples, reachable only through holes on the outside of the rim. The Park Tool SW-19 internal nipple spoke wrench for 6.0 mm hex nipples is the dedicated tool for this type of nipple.
The SW-19 combines a 6.0 mm hex tip with an extra long shaft, designed to reach into the deep cavities of aero rims. The dual-density handle provides a comfortable grip even during long truing sessions.
Where to use the Park Tool SW-19 internal nipple spoke wrench
Wheels with nipples accessible only through holes on the outside of the rim.
Deep-section aero rims, where the long shaft reaches the nipple at the bottom of the cavity.
Tensioning and truing wheels with 6.0 mm hex internal nipples.
Why choose Park Tool SW-19
Dedicated size: the 6.0 mm hex is specific to this type of internal nipple.
Extra long shaft with an 8.2 mm outside diameter to fit into deep rims.
Comfortable dual-density handle for precise control of rotation.
Always check the shape and size of your wheel's nipples before use.
For anyone working on wheels with nipples hidden inside the rim, the Park Tool SW-19 internal nipple spoke wrench 6.0 mm hex is the dedicated tool a traditional spoke wrench cannot replace.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-19Type: internal nipple wrenchHandle: dual-density handle
DimensionsShaft outside diameter: 8.2 mm (0.32")
CompatibilityNipples: internal 6.0 mm hex nipples
PARK TOOL
SPOKE WRENCH PARK TOOL SW-18 FOR ...
€9,90
€15,50
The Park Tool SW-18 is the spoke wrench made specifically for 5.5 mm hex internal nipples. It is used on wheels where the nipples can only be accessed through the holes on the outside of the rim, where traditional spoke wrenches cannot reach.
The extra-long 3.25" shaft has an 8.2 mm outside diameter, sized around the 5.5 mm hex, and reaches the nipple even in aero rims with deep cavities. The dual-density handle makes the wrench comfortable to turn precisely while you check the wheel in the truing stand.
When you need the 5.5 mm internal nipple wrench
On wheels with 5.5 mm hex internal nipples.
On deep aero rims, where the nipple can only be reached with a long shaft.
For truing, correcting hop and adjusting spoke tension.
Why choose Park Tool SW-18
Dedicated 5.5 mm hex, with no compromise on size.
Extra-long 3.25" shaft for aero rim cavities.
Shaft outside diameter of 8.2 mm.
Comfortable dual-density handle.
When a wheel with 5.5 mm internal nipples comes into the workshop, the Park Tool SW-18 spoke wrench for 5.5mm internal nipples is the dedicated tool to true it with care.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-18Brand: Park ToolType: internal nipple spoke wrenchHandle: dual-density
DimensionsShaft length: 3.25"Shaft outside diameter: 8.2 mm (0.32")
CompatibilityInternal nipples: 5.5 mm hex
PARK TOOL
SPOKE WRENCH PARK TOOL SW-17 FOR ...
€9,90
€15,50
The Park Tool SW-17 is a spoke wrench for 5 mm hex internal nipples, the type of nipple that on some wheels can only be reached through the holes on the outside of the rim. With a single, dedicated size, it lets you adjust spoke tension without resorting to makeshift tools.
Park Tool designed it with an extra-long 3.25" shaft and a 7.5 mm outside diameter, made to reach down into the deep cavities of aero rims to the nipple. In the hand it uses a dual-density handle, comfortable when working for a long time on the truing stand.
How to use the 5 mm internal nipple wrench
Insert the shaft into the rim access hole until it engages the 5 mm hex nipple.
Turn from the handle to tighten or loosen the spoke while truing.
Suited to deep-section aero rims, where the nipple sits far from the hole.
Why choose Park Tool SW-17
Dedicated 5 mm hex for internal nipples of this size.
Extra-long shaft for working inside deep cavities.
Shaft outside diameter of 7.5 mm.
Dual-density handle for a comfortable grip.
For the workshop that services wheels with 5 mm hex internal nipples, the Park Tool SW-17 spoke wrench for 5mm internal nipples is the dedicated tool that makes the job cleaner and more controlled.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-17Brand: Park ToolType: internal nipple spoke wrenchHandle: dual-density
DimensionsShaft length: 3.25"Shaft outside diameter: 7.5 mm (0.3")
CompatibilityInternal nipples: 5.0 mm hex
PARK TOOL
SPOKE WRENCH PARK TOOL SW-16.3 FO...
€9,90
€15,50
The Park Tool SW-16.3 is the spoke wrench dedicated to 3/16" (4.8 mm) hex internal nipples, the ones that on some wheels can only be accessed through holes on the outside of the rim. It is a single-size tool: it works on one nipple type only, with a precise fit.
The extra-long 3.25" shaft reaches the nipple even in the deep cavities of aero rims, while the 7.1 mm outside diameter keeps it slim enough to enter the rim access hole. The dual-density handle offers a comfortable grip even during longer truing sessions.
Where to use the 3/16" internal nipple wrench
Wheels with 3/16" (4.8 mm) hex internal nipples.
Deep-section aero rims, where the nipple sits at the bottom of a deep cavity.
Truing and spoke tension adjustment on wheels with nipples hidden inside the rim.
Why choose Park Tool SW-16.3
Dedicated 3/16" (4.8 mm) size for a precise fit on the nipple.
Extra-long shaft designed for deep aero rims.
Slim shaft with a 7.1 mm outside diameter.
Comfortable dual-density handle.
If the wheels you service use 4.8 mm hex internal nipples, the Park Tool SW-16.3 spoke wrench for 3/16" internal nipples is the specific tool to keep on your bench.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-16.3Brand: Park ToolType: internal nipple spoke wrenchHandle: dual-density
DimensionsShaft length: 3.25"Shaft outside diameter: 7.1 mm (0.28")
CompatibilityInternal nipples: 3/16" (4.8 mm) hex
PARK TOOL
DOUBLE-ENDED SPOKE WRENCH PARK TO...
€11,90
€19,11
The Park Tool SW-12 is a double-ended spoke wrench designed for truing Mavic wheels fitted with special splined nipples, where a standard spoke wrench cannot grip. One tool covers two different Mavic standards: the 7-spline nipple of R-SYS wheels and the 6-spline rim fitting with M7 threading.
Park Tool makes it in the USA: each wrench is precision machined, nickel plated and vinyl dipped for a comfortable grip while adjusting. Its shape is designed to work together with a spoke holder, which stops bladed aero spokes from twisting while you turn the nipple.
Compatibility of the SW-12 Mavic spoke wrench
Smaller end: 7-spline nipples with a 6.4 mm outside spline diameter, common on Mavic R-SYS wheels; sized equal to Mavic 10847101 and 99607901 spoke wrenches.
Larger end: 6-spline rim fittings with a 9.6 mm outside spline diameter and M7 threading, found on Mavic XM819, EX823 and Speedcity wheels; sized equal to Mavic M40652 spoke wrench.
Suited to truing and spoke tension adjustment on these wheels.
Why choose Park Tool SW-12
Two Mavic profiles in one wrench: fewer tools to look for on the bench.
Sizes matched to the original Mavic wrenches listed by Park Tool.
Precision machining, nickel plating and vinyl dipping.
Shape designed for use with a spoke holder on bladed spokes.
Made in the USA by Park Tool.
If Mavic wheels with dedicated nipples come through your workshop, the Park Tool SW-12 double-ended spoke wrench lets you always work with the correct size, with no makeshift solutions.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-12Brand: Park ToolType: double-ended spoke wrenchOrigin: made in the USA
MaterialsFinish: nickel plated, vinyl dipped
CompatibilitySmaller end: 7-spline nipples, 6.4 mm outside diameter (Mavic R-SYS)Larger end: 6-spline rim fittings, 9.6 mm outside diameter, M7 threading (Mavic XM819, EX823, Speedcity)Equivalents: Mavic wrenches 10847101, 99607901 and M40652
PARK TOOL
SPOKE WRENCH PARK TOOL SW-1 FOR 3...
€6,99
€10,39
The Park Tool SW-1 is a professional-quality spoke wrench for spoke nipples with 3.30 mm (0.130") wrench flats. This spoke wrench is designed for anyone working on wheels with nipples of this size, which is less common on modern bikes but still found on many vintage bicycles.
Spoke wrenches have been a Park Tool mainstay for over 50 years, and their simple, professional design remains a favourite among mechanics worldwide. The SW-1 is made in the USA, heat treated and nickel plated, and its vinyl dip indicates the size at a glance, so you grab the right wrench from the tool board straight away.
Where to use the Park Tool SW-1 spoke wrench
Nipples with 3.30 mm (0.130") wrench flats.
Older American-made bicycles, including many vintage Schwinn models.
Wheels built with Union or Torrington spokes.
Truing, tensioning and building wheels with nipples of this size.
Measure the nipple before use, as the 3.30 mm size is uncommon on modern bikes.
Why choose the Park Tool SW-1
Dedicated 3.30 mm size for a precise fit on the nipple.
Heat treated and nickel plated, built to last.
Vinyl dip that shows the size at a glance.
Made in the USA, with a design proven over decades.
To maintain or restore wheels with 3.30 mm nipples, the Park Tool SW-1 spoke wrench is the right tool to have in the workshop.
TECHNICAL SPECIFICATIONS
GeneralCode: SW-1Type: spoke wrenchMade in: USA
DimensionsWrench flat size: 3.30 mm (0.130")
MaterialsFinish: heat treated and nickel platedGrip: vinyl dip
CompatibilityNipples: with 3.30 mm wrench flatsTypical applications: older American-made bicycles, many vintage Schwinn models, wheels with Union or Torrington spokes
PARK TOOL
SWIVEL WORKSHOP STOOL 76CM PARK T...
€158,95
€227,20
The Park Tool STL-1.2 is a 76 cm high workshop stool, the ideal height for truing wheels or working at a bench or counter. A solid, well-finished Park Tool workshop stool, designed for the workstation as well as the front counter area.
The legs are chrome-plated steel and the padded seat, featuring a three-colour Park Tool logo, swivels 360 degrees: you can turn towards the truing stand, the bench or your tools without getting up. If you want back support, you can add the STL-3K backrest kit, sold separately.
Where to use the Park Tool STL-1.2 workshop stool
At the truing stand, to true and tension wheels while seated.
At the workbench, for assembly and component adjustments.
At the counter, where a tall, stable seat is needed.
At any station where you work for long periods at worktop height.
Why choose the Park Tool STL-1.2
76 cm height, perfect for bench work and wheel truing.
Padded seat that swivels 360 degrees.
Chrome-plated steel legs.
Option to add the STL-3K backrest kit, sold separately.
To complete your truing station or workbench, the Park Tool STL-1.2 workshop stool offers the right seat at the right height.
TECHNICAL SPECIFICATIONS
GeneralCode: STL-1.2Type: workshop stoolSeat: padded, 360° swivelOptional accessory: STL-3K backrest kit (sold separately)
DimensionsHeight: 76 cm (30")
MaterialsLegs: chrome-plated steelSeat: padded with three-colour Park Tool logo
PARK TOOL
Y-SOCKET WRENCH 8-9-10MM PARK TOO...
€12,90
€21,00
The Park Tool ST-3 is a Y socket wrench that combines the three most common nut and bolt sizes on a bicycle in a single tool: 8, 9 and 10 mm. It is the Y socket wrench to keep on the bench for brakes, racks, accessories and all the small everyday adjustments.
The shape is the classic Park Tool "Y": all three sockets are always ready and switching from one size to another is just a matter of turning the wrench, with no need to hunt for the right socket in the toolbox. The sockets are made of forged chrome vanadium steel, a material suited to daily use in the workshop as well as for home maintenance.
Where to use the Park Tool ST-3 Y-wrench
Brakes: fastening and adjusting components with 8, 9 or 10 mm nuts or bolts.
Racks: fitting and tightening the mounts.
Accessories fastened with bolts or nuts of these sizes.
Quick jobs at the bench, when you need a wrench that is ready straight away.
Why choose the Park Tool ST-3
Three 8, 9 and 10 mm sockets in one compact tool.
Classic Park Tool Y shape, comfortable to hold.
Sockets in forged chrome vanadium steel.
Suitable for both the professional workshop and home maintenance.
For anyone looking for a simple, reliable tool for the most common sizes on a bike, the Park Tool ST-3 Y socket wrench is a practical choice that proves useful on every job.
TECHNICAL SPECIFICATIONS
GeneralCode: ST-3Type: Y socket wrench (3-way)
DimensionsSocket sizes: 8 mm, 9 mm, 10 mm
MaterialsSockets: forged chrome vanadium steel
PARK TOOL
CHAIN WHIP FOR FIXED GEAR AND SIN...
€29,99
€49,50
The Park Tool SR-18.2 is the chain whip designed for fixed-gear and single-speed bikes. This Park Tool SR-18.2 chain whip securely engages 1/8" fixed-gear sprockets and 1/8" single-speed cassettes during removal.
The chain section of the SR-18.2 is dedicated to 1/8" drivetrains and wraps around the cog to hold it still while you work. The body is heat-treated so it does not bend or flex when force is applied, and hardened pins keep the chain firmly in place. The long, ergonomically molded handle, with an overall length of 35.5 cm, provides leverage and comfort even during the toughest jobs. At the other end there is a built-in 1" (25.4 mm) box-end wrench that drives Park Tool freewheel and cassette lockring tools.
Where to use the Park Tool SR-18.2 chain whip
Removing 1/8" sprockets on fixed-gear bikes.
Removing 1/8" single-speed cassettes.
Driving Park Tool freewheel and cassette lockring tools with the 1" wrench.
Why choose the Park Tool SR-18.2
Chain dedicated to 1/8" drivetrains.
Heat-treated body that resists bending and flexing.
Hardened pins that keep the chain in place.
Long, ergonomic handle for more leverage and comfort.
Built-in 1" box-end wrench for Park Tool lockring tools.
For mechanics and fixed-gear and single-speed enthusiasts, the Park Tool SR-18.2 chain whip is the dedicated tool for working on 1/8" cogs with precision and safety.
TECHNICAL SPECIFICATIONS
GeneralCode: SR-18.2Type: chain whip / sprocket removerBuilt-in wrench: 1" (25.4 mm) box-end for Park Tool lockring tools
DimensionsLength: 35.5 cm (14")
MaterialsBody: heat-treatedPins: hardenedHandle: long, ergonomically molded
CompatibilitySprockets: 1/8" fixed gearCassettes: 1/8" single speed