The Park Tool CRS-15.2 is the professional system for installing the headset crown race on forks with an oversized 1-1/4" or 1.5" steering column. Using the long, strong driver tube, one of the included drifts and a hammer or mallet, the race is driven safely and accurately into its correct position on the fork crown seat.
The set includes two anodised aluminium drifts, one 1-1/4" and one 1.5": the drift material prevents damage to the crown race while it is driven. The system works on steering columns from 31.7 to 38.1 mm in diameter, measured at the base of the column, and is compatible with SHIS sizes 33 and 40. It accepts steering columns up to 330 mm long, or 425 mm with the CRS-15EXT extension. A hammer or mallet is not included.
How the CRS-15.2 crown race setting system works
- Choose the 1-1/4" or 1.5" drift to match the fork steering column
- Slide the driver tube over the steering column, with the drift against the race
- Strike the tube with a hammer or mallet until the race is fully seated
- 1-1/4" and 1.5" steering columns (31.7-38.1 mm)
- Steering column length up to 330 mm, up to 425 mm with extension
- SHIS sizes 33 and 40
- For 1" or 1-1/8" columns Park Tool recommends the CRS-1
Why choose the Park Tool CRS-15.2
- System dedicated to forks with oversized steering columns
- Two specific drifts for the 1-1/4" and 1.5" standards
- Anodised aluminium drifts that protect the crown race
- Long, strong driver tube for safe and accurate installation
- Compatible with SHIS sizes 33 and 40
For the workshop that fits headsets on forks with oversized steering columns, the Park Tool CRS-15.2 oversized crown race setting system is the tool that seats the race correctly and without marking it, complementing the CRS-1 for 1" and 1-1/8" columns.
TECHNICAL SPECIFICATIONS
General
- Code: CRS-15.2
- Type: oversized fork crown race setting system
Dimensions
- Steering column diameter: 1-1/4" and 1.5" (31.7-38.1 mm, measured at the base)
- Steering column length: up to 330 mm, 425 mm with CRS-15EXT extension
Materials
- Drifts: anodised aluminium
Compatibility
- SHIS standard: 33, 40
- 1" and 1-1/8" columns: not compatible, use CRS-1
Contents
- Driver tube: 1
- Drifts: 2 (1-1/4" and 1.5")
- Not included: hammer or mallet
The Park Tool CRS-15.2 is the professional system for installing the headset crown race on forks with an oversized 1-1/4" or 1.5" steering column. Using the long, strong driver tube, one of the included drifts and a hammer or mallet, the race is driven safely and accurately into its correct position on the fork crown seat.
The set includes two anodised aluminium drifts, one 1-1/4" and one 1.5": the drift material prevents damage to the crown race while it is driven. The system works on steering columns from 31.7 to 38.1 mm in diameter, measured at the base of the column, and is compatible with SHIS sizes 33 and 40. It accepts steering columns up to 330 mm long, or 425 mm with the CRS-15EXT extension. A hammer or mallet is not included.
How the CRS-15.2 crown race setting system works
- Choose the 1-1/4" or 1.5" drift to match the fork steering column
- Slide the driver tube over the steering column, with the drift against the race
- Strike the tube with a hammer or mallet until the race is fully seated
- 1-1/4" and 1.5" steering columns (31.7-38.1 mm)
- Steering column length up to 330 mm, up to 425 mm with extension
- SHIS sizes 33 and 40
- For 1" or 1-1/8" columns Park Tool recommends the CRS-1
Why choose the Park Tool CRS-15.2
- System dedicated to forks with oversized steering columns
- Two specific drifts for the 1-1/4" and 1.5" standards
- Anodised aluminium drifts that protect the crown race
- Long, strong driver tube for safe and accurate installation
- Compatible with SHIS sizes 33 and 40
For the workshop that fits headsets on forks with oversized steering columns, the Park Tool CRS-15.2 oversized crown race setting system is the tool that seats the race correctly and without marking it, complementing the CRS-1 for 1" and 1-1/8" columns.
TECHNICAL SPECIFICATIONS
General
- Code: CRS-15.2
- Type: oversized fork crown race setting system
Dimensions
- Steering column diameter: 1-1/4" and 1.5" (31.7-38.1 mm, measured at the base)
- Steering column length: up to 330 mm, 425 mm with CRS-15EXT extension
Materials
- Drifts: anodised aluminium
Compatibility
- SHIS standard: 33, 40
- 1" and 1-1/8" columns: not compatible, use CRS-1
Contents
- Driver tube: 1
- Drifts: 2 (1-1/4" and 1.5")
- Not included: hammer or mallet
Buy safely
La connexion et les transactions sont toujours sécurisées.
Free Shipping
With DHL or GLS courier for orders over 49 euros
Do you need help?
Whatsapp: 3341036415
Mon / Fri: from 10 to 19