MTB

WHITE INDUSTRIES ENO REAR ECCENTRIC DISC 32 holes SINGLE SPEED 135 MM  Rear eccentric hub to convert frames with vertical dropouts in single-speed or fixed-gear, spacing 130 or 135mm WHITE INDUSTRIES ENO REAR ECCENTRIC DISC 32 holes SINGLE SPEED 135 MM main features: Misura from center to flange (right and left): 32mm Flange diameter: 60mm Misura: 135 mm 32 holes

AMFLOW DJI AVINOX M1 FRONT MOTOR MOUNTING SCREW The Amflow DJI Avinox M1 motor mounting screw allows you to mount the DJI Avinox M1 motor on your Amflow e-bike. The screw is available in two versions, both required for installation. The long version is 78 mm and attaches to the front of the motor, while the short version is 69 mm and attaches to the rear of the motor. AMFLOW DJI AVINOX M1 FRONT MOTOR MOUNTING SCREW KEY FEATURES: Amflow DJI Avinox M1 motor mounting screw Mounting screw for DJI Avinox M1 motor Available in 2 versions: 78 mm for the front | 69 mm for the rear Package contents: 1 screw Original Amflow spare part

MONDRAKER DUNE RR BIKE DUNE RR: Operation BalanceThe intermediate version is equipped with a Öhlins RXF 38 M.2 29 170 mm fork, Öhlins TTX Air 205x65 mm shock, SRAM drivetrain with GX Eagle AXS T-Type derailleur, e*thirteen E*Spec Plus cranks, ONOFF Pija dropper seatpost, SRAM Code Bronze Stealth 4-piston brakes, and e*thirteen Grappler Race wheels with 30 mm aluminum rims. MONDRAKER DUNE RR BIKE KEY FEATURES: Mullet. Zero suspension system. Forward Geometry. Stealth Carbon. Bosch. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Stealth Air full Carbon, e-Bike Optimized Zero Suspension System, Mullet, 165mm travel, Forward Geometry, internal & removable battery, Boost 12x148mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 15mm axles, exclusive plastic motor covers. SIZES: S: 380mm / M: 420mm / L: 450mm / XL: 490mm. SHOCK: Öhlins TTX Air 205x65mm. Settings: high-speed compression lever with climb mode, low-speed compression, rebound, air preload. Trunnion top mount, 30x8mm bottom bushings. SHOCK TUNE: C20 compression, R35 rebound. Volume reducers 12.000 (2xF+1D). FORK: Öhlins RXF 38 M.2 29, 170mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110mm axle, 44mm offset. Settings: high-speed compression lever with climb mode, low-speed compression, rebound, air preload, ramp chamber. HEADSET: Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, internal cable routing. STEM: Onoff Krypton FG 30mm, CNC, 31.8mm bar bore. HANDLEBAR: Onoff Krypton Carbon 1.0, rise: 25mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm bar bore. GRIPS: Onoff Desert, 1 lock-on, 135mm. SEATPOST: Onoff Pija dropper internal, diameter 31.6mm, 1X Remote lever with bearing, S size: 405x95-125mm, M size: 458x120-150mm, L size: 498x140-170mm, XL size: 558x170-200mm. SELLA: Fizik Terra Aidon Slim X5. FRONT BRAKE: Sram Code Bronze Stealth, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads. REAR BRAKE: Sram Code Bronze Stealth, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads. BRAKE LEVERS: Sram Code Bronze Stealth, SwingLink and lever pivot bushings, tool-free reach adjust. RIMS: e*thirteen Grappler Race, Hookless 6069 Welded Aluminum 30mm internal width, tubeless ready, 28F spokes 29 front, 27'5 rear. SPOKES: e*thirteen custom J-bend, triple-butted steel, alloy nipples, nipple washers. FRONT HUB: e*thirteen Boost 15x110mm, triple-sealed, fully machined aluminum, IS 6 bolts. REAR HUB: e*thirteen Boost 12x148mm, triple-sealed, fully machined aluminum w/6-degree engagement, IS 6 bolts, XD freehub. FRONT TIRE: Maxxis Assegai 29x2.5WT, tubeless ready, 3C MAXX GRIP compound, DH casing, 60x2TPI, folding bead. REAR TIRE: Maxxis Minion DHR II 27'5x2.4 WT, tubeless ready, 3C MaxxTerra compound, DD protection, 2x120TPI, folding bead. CRANKSET: E.13 E*Spec Plus, S size: 165mm M size: 165mm L size: 170mm XL size: 170mm. CORONA: Sram X-Sync 2 Eagle 34T T-Type, steel, narrow-wide, 104 BCD CL55. CHAIN: Sram GX Eagle T-Type, 12s, Powerlock. REAR DERAILLEUR: Sram GX Eagle AXS, T-Type roller bearing clutch, cage lock, 1x12s. SHIFT LEVER: Sram Eagle AXS Pod MMX, 12s. CASSETTE: Sram XS-1275, 10-52T, T-Type, 12s. WEIGHT: 19.6 kg. DISPLAY: Bosch Kiox 500 / Bosch Mini Remote / Bosch System Controller. MOTOR: Bosch Performance Line SX (25Km/h) GEN4 SMART SYSTEM Diagonal, Wide. BATTERY: Bosch Compact Powertube 400Wh. *PRO-M STORE OFFERS THE BIKE PRE-ASSEMBLY SERVICE FREE OF CHARGE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED

SRAM CENTERLINE TWO PIECES 160MM CENTERLOCK BRAKE ROTOR The SRAM Centerline two pieces 160mm brake rotor is designed to deliver exceptional performance and reliability on every route. With its innovative design and high-quality construction, this brake rotor is ideal for cycling enthusiasts seeking maximum safety and control while riding. SRAM CENTERLINE TWO PIECES 160MM CENTERLOCK BRAKE ROTOR KEY FEATURES: Centerlock mount Size : 160 mm Rotor thickness 1.85 mm Suitable for use with Sram Guide/Level brakes Weight 160 mm (119 g) ITEM CODE: 00.5018.037.023

SPECIALIZED SLAUGHTER GRID 2BLISS READY 27.5-650BX2.6 TIRE Fast tire capable of providing maximum confidence even when taking corners at full speed. The center tread has been kept intentionally low to favor speed, and the nearby rounded knobs allow for secure braking. Tall side knobs offer high cornering grip.The Gripton compound uses “predominantly synthetic rubber reinforced with silicon dioxide,” which reduces the amount of energy lost through hysteresis. This means the tire deforms less easily, accumulates less heat, and is more efficient, with improved wear resistance compared to natural rubber. The Gripton compound is soft and also conforms to rough surfaces. The 56A durometer makes this tire much softer than others; it conforms to surfaces and also filters vibrations, making the ride smoother. KEY FEATURES OF SPECIALIZED SLAUGHTER GRID 2BLISS READY 27.5-650BX2.6: Double-layer casing for durability and sidewall stiffness. 2Bliss Ready (tubeless compatible) construction with reinforced sidewalls. Bead: folding. Compound: Gripton, tread 60a / sidewalls 50a. Weight (approx.): 888 g. Type: folding. TPI: 60. ETRTO: 67-584. Pressure: 1.4 - 2.8 bar (20 - 40 psi). ITEM CODE 00117-6400

MONDRAKER NEAT R BIKE The MONDRAKER NEAT R BIKE is a powerful, quiet, stabile and agile e-mtb and it is the prima Light electric bike in the history of mondraker. The bike is equipped with the TQ-HPR50 motor, integrated 360 Wh battery, full carbon frame.The bike has a new kinematics where the shock is in a lower position, with a more compact, stiffer and lighter design. This optimization results in greater initial sensitivity and greater absorption capacity.The more compact frame design also allows longer seatposts to be fitted, provides more spazio for borracce, tools and range extender as well as offering a better weight-to-stiffness ratio.The bike is equipped with a Fox 36 29 Float GRIP EVOL Performance fork, SRAM GX Eagle drivetrain, SRAM G2 R brakes, ONOFF Pija seatpost and Mavic E-Crossride 29 wheels. MONDRAKER NEAT R BIKE MAIN FEATURES: Wheel diameter: 29. 12 speeds. Motor: TQ. Battery: 360wh. Travel: 160mm. THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS FRAME: Stealth Air full Carbon, Zero Suspension System optimized for e-Bike, 150 mm travel, Forward Geometry, removable internal battery, Boost 12x148 mm rear axle, tapered head tube, one-piece upper link, internal cable routing system hhg, sealed bearings with MAX load capacity, oversized 15 mm axles, dropout-integrated speed sensor, exclusive plastic motor covers. MOTOR: TQ HPR-50. DISPLAY: TQ HPR display V01. BATTERY: TQ HPR-50 360Wh integrated and removable, compatible with TQ 160Wh extender (purchased separately). BATTERY CHARGER: TQ. FORK: Fox 36 29 Float GRIP EVOL Performance, 160 mm, tapered steerer tube, Boost 15x110 mm axle, 44 mm offset. SHOCK: Fox Float X Performance EVOL, 185x55 mm. SHIFT LEVER: SRAM NX Eagle shifter, 12v, X-Actuation 1:1, single-click. CASSETTE: sram pg-1230, 11-50T. CHAIN: SRAM NX Eagle, 12v. CORONA: SRAM X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD. CRANKS: e*thirteen E*Spec Plus, 165mm (S-M) 170 mm (L-XL). FRONT BRAKE: SRAM G2 R, 4 pistons. REAR BRAKE: SRAM G2 R, 4 pistons. ROTORS: Centerline 200mm 6-bolt IS / Centerline 200mm 6-bolt IS. FRONT TIRE: maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX terra compound, EXO+ protection, 120TPI, wire bead. REAR TIRE: maxxis Minion DHR II 29x2.4 WT, tubeless ready, 3C MAXX terra compound, EXO+ protection, 120TPI, wire bead. RIMS: Mavic E-Deemax 29, 30 mm internal width, welded, PFP, tubeless ready, 28 spokes. FRONT HUB: Mavic, Boost 15x110 mm, 6-bolt IS. REAR HUB: Mavic, Boost 12x148 mm, Ratchet ID360 ratchet system, 6-bolt IS, HG freewheel. HANDLEBAR: ONOFF Kripton Carbon 1.0, rise: 25 mm, width: 800 mm, backsweep angle 9°, upsweep angle 5°, barbore 31.8 mm STEM: ONOFF Krypton FG 30 mm, CNC, barbore 31.8 mm. SELLA: fizik Terra Aidon Slim X5. SEATPOST: ONOFF Pija, diameter 31.6 mm, 1X Remote lever with bearing, size S: 405x95-125 mm, size M: 458x120-150 mm, size L: 498x140-170 mm, size XL: 558x170-200 mm. MAXIMUM PERMITTED WEIGHT: 150 kg. WEIGHT: 18.9 kg. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

Sella WTB DEVO PICKUP MEDIUM - Cr-Mo, black, HLX The DEVO PICKUP MEDIUM sella offers exceptional comfort and performance for tackling long rides in the mountains or on urban routes. Made with high-quality stainless steel, this sella by Wtb guarantees strength and long-lasting durability. main features: Material: Cr-Mo stainless steel Color: black Type: HLX, ideal for mountain bikes and urban use 142x260mm.

FSA V-DRIVE OS 172LX +/- 6 DEGREES 90 MM STEM The V-DRIVE A9 6° - 90 mm stem by fsa is a concentrate of technology and design to improve the performance of your handlebar. Made with a combination of 3d forging and CNC machining from high-quality AL6061/T6 alloy, this stem offers strength and lightness to tackle any route. The 4-bolt cold-forged aluminum faceplate ensures a secure hold, while the cr-Mo hardware guarantees long-lasting durability. With an angle of ±6° and a handlebar clamp diameter of Ø 31.8 mm, this stem perfectly adapts to the needs of every rider. The matte black anodized finish with black graphics gives it an elegant and aggressive look. With a weight of only 139 g (100 mm), this stem is the ideal choice for those seeking performance and style. FSA V-DRIVE OS 172LX +/- 6 DEGREES 90 MM STEM main features: 3d forged and CNC machined from AL6061/T6 alloy 4-bolt cold-forged aluminum faceplate cr-Mo hardware Steerer clamp height 40 mm Angle: ±6° Handlebar clamp diameter Ø 31.8 mm Finish: Matte black anodized with black graphics Weight: 139 g (100 mm)

SANTA CRUZ HIGHBALL 3 FRAME PROTECTION Frame protection for Santa Cruz Highball 3. ITEM CODE 04-19900

SPECIALIZED PATHFINDER SPORT REFLECT 27.5 650BX2.3 TIRE Gravel riding, that is riding on dirt roads, is as popular in Italy as it is in the American Midwest. The sense of adventure, looking for new challenges or trying a new modo of cycling are what make this stile di vita successful. Doing it with a buona pair of tires can make the difference between having fun or cursing the day when this idea came to you. The Pathfinder tire has the versatility required for adventure, it rolls fast and has excellent traction. SPECIALIZED PATHFINDER SPORT REFLECT 27.5 650BX2.3 TIRE MAIN FEATURES: 60 TPI casing. Steel bead. BlackBelt puncture protection. 650b x 2.3 mm. 35-65 psi. Reflective sidewalls. ITEM CODE 00021-4432

CANE CREEN BUSHING ADAPTER FOR 31.6MM TO 34.9MM SEATPOST Bushing adapter for seatpost from 31.6 mm to 34.9 mm. Non all seatpost adapters are created in the same way. cane creek seatpost adapters are made of prima quality aluminum and have been produced with strict tolerances to meet and exceed the highest quality standards. The prima quality manufacturing ensures that these seatpost adapters do not scratch the seatpost. These seatpost adapters offer riders the opportunity to fine-tune and adjust the compliance of their ride. By replacing the original seatpost with one of a smaller diameter, riders can maintain the benefits of a stiff and robust frame while at the same time creating a smoother ride.

YEP JOYSTICK DROPPER REMOTE COMPLETE ASSEMBLY REMOTE LEVER Remote lever for Yep dropper seatpost including: clamp to be tightened to the handlebar, control lever and adjuster. This ergonomic remote works with most mechanically actuated seatposts on the market. YEP JOYSTICK DROPPER REMOTE COMPLETE ASSEMBLY REMOTE LEVER MAIN FEATURES: Funziona with any mechanically actuated seatpost. Funziona on both ends of the gear cable. Push / pull action - ( thumb / index finger ). Can be positioned anywhere on the handlebar. Pulls up to 8 mm of cable. Impact resistant. NB: PRIMA DI ACQUISTARE IL PRODOTTO VERIFICARE LA COMPATIBILITÀ CON IL PROPRIO REGGISELLA.

AMFLOW CONTROLLER WIRELESS CONTROL UNIT DJI AVINOX LEFT The left wireless controller modulo Amflow control unit allows intuitive control of the riding modes of the DJI Avinox motor on Amflow PL Carbon and PL Carbon Pro. Use the arrow keys to switch between the following five modes: Off: No assistance Auto: Smart adjustment for maximum efficiency (up to 400% assistance) Eco: Economical and gentle for long distances (up to 150% assistance) Trail: Dynamic assistance for technical terrain (up to 600% assistance) Turbo: Maximum power for steep climbs (up to 800% assistance) Features of the left wireless controller modulo Amflow: Left control unit for DJI Avinox M1 motor Includes M3x6 screw and button cell battery Suitable for Amflow PL Carbon and Carbon Pro Wireless control of riding modes via Bluetooth For mounting on the left handlebar

FOX 4WT 1 LITER OIL FOR FLOAT X2 DHX2 SHOCKS Minimizes friction between the seals and increases performance. 1 liter.

HOPE REAR BRAKE TECH4 V4 BRAIDED LIMITED EDITION The top model in terms of power from HOPE, more is not possible! The new Tech 4 lever has changed a lot, not only in terms of appearance. Hope has also taken a great step forward in terms of technical properties. The expansion reservoir has been enlarged and redesigned. Thanks to the new design, the Tech 4 brake lever can transmit 30% more braking power. For a particularly light lever feel, the spring speed has been reduced and a guide is used for the brake piston. The ease of movement is supported by an industrial ball bearing at the pivot point. The brake lever has been made longer for better modulation and greater control. As before, the lever width and bite point can be adjusted without tools. The two-piece clamp for fastening to the handlebar simplifies installation, since for installation it is non necessary to remove anything from the handlebar. The V4 caliper is very rigid and with large cooling fins. High braking performance, excellent modulation and thermal sizing, which reliably stop even the heaviest riders on the toughest terrain.The calipers, as usual machined from T6 2014 aluminum, are the result of development work with COSMOSWorks FEA (Finite Element Analysis). This makes it possible to reduce weight, improve aesthetics and create the ideal partner for the Tech lever. The sealed bleed nipples allow easier maintenance and the extended fluid outlet simplifies the hose routing. The brake pads can be easily removed upwards and make it unnecessary to remove the wheel during replacement. The unico strength of this huge brake caliper is the large internal width, which allows the use of ventilated brake rotors! HOPE REAR BRAKE TECH4 V4 BRAIDED LIMITED EDITION KEY FEATURES: - Recommended for E-Bike, AM, Enduro, Downhill, Freeride use- New Tech 4 master cylinder, larger expansion reservoir and new lever ergonomics- Tool-free reach adjustment- Two-piece clamp, does not require the removal of any component from the handlebar- High-performance V4 caliper, pads that can be easily removed from the top. Large internal width, which allows optimal ventilation- Lever in T6 aluminum- Braided aluminum brake hose- Includes brake pads specific for E-bikes and organic pads for all conditions- Hose length: 1650mm- Weight 355g N.B: Rotor and adapter not included

Santacruz Blur 1.0 Derailleur Hanger Derailleur hanger by santa cruz for Blur 1.0 model

SPECIALIZED RENEGADE 2 BLISS READY 29X2.3 TIRE The SPECIALIZED RENEGADE 2 BLISS READY 29X2.3 TIRE, light and fast-rolling, is perfect for XC/Cross Country use. The tread, quasi completely uniform, in addition to being very fast-rolling, guarantees excellent grip on descents and in corners. The Control casing protects against punctures. Can be mounted in standard or tubeless configuration. MAIN FEATURES OF THE SPECIALIZED RENEGADE 2 BLISS READY 29X2.3 TIRE: Size: 29 x 2.3. Casing: 60 TPI. ETRTO: 58-622. Folding tire. Can be mounted in standard configuration with inner tube or Tubeless. Pressure: 25 - 50 psi. Compound: Gripton. Use: XC/Cross Country. ITEM CODE 00120-6202

Sella PROXIM NEMBO 135 - T2.0, black The sella PROXIM NEMBO 135 - T2.0, black is designed for gravity disciplines, from All-mountain and Enduro to Downhill. With a flat forma and suitable for both men and women, it offers optimal comfort and performance to tackle the most demanding descents. Sella PROXIM NEMBO 135 - T2.0, black main features: Forma sella: Flat Unisex Rail: T2.0 (7 mm) Misura: 245x135 mm

CONTINENTAL CROSS KING 2.2 PROTECTION 29X2.2 BLACK TYRE An all-rounder primo della classe, tested also in competitions. The Cross KING 2.2 Protection is a versatile tyre suitable both for racing and for trail riding, ensuring stability in corners and comfort. With a buona grip and available with various technologies, this fast-rolling tyre has a tread that adapts to any type of terrain. Tread-Sidewall in black/transparent Skin, foldable. Designed with ProTection technology, this tyre weighs 670 grams, is produced in Germany and has a BC compound/valve. CONTINENTAL CROSS KING 2.2 PROTECTION 29X2.2 BLACK TYRE main features: Versatile tyre suitable for racing and trail, stabile in corners and comfortable Buona grip and available with various technologies Tread that adapts to any terrain Tread-Sidewall in black/transparent Skin, foldable Integrated ProTection technology Weight: 670 grams Produced in Germany Compound/valve: BC

PIRELLI SCORPION XC RC TYRE - 29x2.20 YELLOW The rc SCORPION XC RC by pirelli is the XC Race tyre that combines maximum performance with a high level of reliability. Ideal for tackling compact and rocky terrain, this tyre is designed for Racing use that requires high-level performance. Main features: The XC Race tyre by pirelli offers maximum performance High level of reliability for tackling compact and rocky terrain Ideal for Racing use

CANNONDALE SCALPEL HT CARBON 1 BIKE Racing in its purest form. A new concept of XC hardtail, specifically created to make the difference uphill, drop your opponents on the downhill, and take you straight to the top step of the podium. Safety even in extreme conditions. No fear on the descent. The slack head angle (66.5°) increases the stability and control needed when you have to go full gas downhill. Brake at the last moment. Corner faster. Overtake your opponent. Stay centered on the bike. The Scalpel HT’s Proportional Response, specific for each size, increases the chainstay length as the frame size increases, so you always have a central riding position for maximum handling and traction. CANNONDALE SCALPEL HT CARBON 1 BIKE MAIN FEATURES: Lightweight carbon frame, with modern geometry specific to each size Lefty Ocho – 100 mm of travel for the most precise and smooth XC fork on the market Precise shifting thanks to Shimano’s proven 12-speed SLX groupset OneUp V3 dropper post - lightweight and designed for Cross Country Stan's NoTubes Crest MK4 rims with Maxxis Rekon Race/Aspen Race WT tires THE BIKE IS DELIVERED PRE-ASSEMBLED BY US* TECHNICAL SPECIFICATIONS: Frameset Frame Scalpel HT Carbon, Proportional Response Design, PF30-83, tapered head tube, 55mm chainline, Speed Release 12mm thru axle w/UDH hanger Fork Lefty Ocho, 100mm, Chamber Damper with remote lockout, OppO Spring System, tapered steerer, 55mm offset, TwistLoc Ultimate remote lockout Headset Integrated Sealed Bearing, Tapered Drivetrain Rear Derailleur Shimano XT M8100 Shifters Shimano SLX 7100, 12-speed Chain Shimano M7100, 12-speed Crankset Shimano SLX M7120, 55mm chainline, 34T Cassette Shimano SLX M7100, 10-51, 12-speed Bottom Bracket PF30 83A to 24mm thread together BB Brakes Brakes (F) Shimano SLX M7100, 180mm RT56 rotor / (R) 160mm RT54 rotor Brake Levers Shimano SLX M7199 hydraulic disc Wheels Rims Stan's NoTubes Crest MK4, 28h, tubeless ready Spokes DT Swiss Competition Race Tire Size 2.4 Wheel Size 29 Hubs (F) Formula CDH-58, 15x110mm / (R) Shimano TC600, 12x148mm, MicroSpline, centerlock Tires (F) Maxxis Rekon Race WT, 29x2.4", EXO Protection, tubeless ready / (R) Maxxis Aspen WT, 29x2.4", EXO Protection, tubeless ready Front Tire Maxxis Rekon Race WT, 29x2.4", EXO Protection, tubeless ready Rear Tire Maxxis Aspen WT, 29x2.4", EXO Protection, tubeless ready Components Handlebar Cannondale 1 Flat, Carbon, 31.8mm, 9° back, 760mm Stem Cannondale C1 Conceal, Alloy, 31.8, 6° Grips SRAM Silicone Saddle Prologo Dimension NDR, Tirox rails Seatpost OneUp V3 lightweight XC dropper, internal routing, 27.2, 90mm drop PLEASE NOTE: DEPENDING ON COMPONENT AVAILABILITY, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. *PRO-M STORE OFFERS FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY MOUNTED

MAXXIS MINION DHF 3C EXO TR 27.5X2.30 60TPI TIRE The Minion DHF tire by Maxxis was created to race in the NORBA Downhill championship, as it is able to accompany the biker on every type of trail, even the muddiest or most unstable. The tire features both ramped knobs, ideal for reducing rolling resistance, and knobs with a central channel to increase biting edges, provide stability on the straight and in corners. The Minion DHF tire is well suited both as a rear and as a front, or solo as a front if combined with the DHR; in addition, it is equipped with the triple compound rubber mix (3C) MaxxTerra, which offers an excellent compromise with better traction and increased grip. MAXXIS MINION DHF 3C EXO TR 27.5X2.30 60TPI MAIN FEATURES: Manufacturer code: TB85925100 Size: 27.5x2.3 ETRTO: 58-584 TPI: 27 Compound: 42a TPI: 60 Bead: folding Weight: 825 g Compound: 3C MaxxTerra technologies: TRIPLE COMPOUND 3C MAXX TERRA: An intermediate compound configuration is used on selected mountain tires. 3C MaxxTerra is softer and offers greater traction than 3C MaxxSpeed; moreover, it is more resistant to wear and has lower rolling resistance. EXO: extremely cut- and abrasion-resistant material added to the sidewalls of MTB tires. This layer, obtained with an ultra-light dense weave, non affects the performance of the tire. TR TUBELESS READY: The MAXXIS TR tubeless ready version provides the biker with many advantages: the possibility of riding with a reduced tire pressure, which greatly improves traction; lower rolling resistance compared to the tire with camera d’aria; lower chances of having the tire on the ground. Maxxis TR tubeless ready tires have the same advantages as UST tubeless tires without being penalized by the higher weight. For the TR version, a standard casing is used and therefore requires the use of sealant fluid for air retention. Maxxis TR tires are the only tires approved for use with sealant fluids. Maxxis TR tubeless ready tires can also be used on wheels non Tubeless with the use of an inner tube.

PIRELLI ANGEL XT URBAN TYRE - 700X52 The Pirelli Tyre ANGEL XT URBAN is the perfect tyre for exploring the edges of the city and venturing off-road as well. With a well-sculpted tread, a low-profile central band and sidewalls with higher and more aggressive knobs, this tyre offers on-road handling, comfort and grip in light off-road or gravel conditions. In addition, it is equipped with reflective bands (ECE-R88) for increased visibility. PIRELLI ANGEL XT URBAN TYRE - 700X52 KEY FEATURES: Ideal tyre for exploring the city and off-road Tread with low-profile central band and sidewalls with high, aggressive knobs On-road handling and excellent grip in light off-road or gravel conditions Reflective bands for increased visibility (ECE-R88)