Evil
BIKE EVIL OFFERING V2 LYRIK/PUSH
€4.049,50
€8.098,99
BICI EVIL OFFERING V2 LYRIK/PUSH
The BICI EVIL OFFERING V2 is a trail bike with 150 mm of front travel, 29" wheels and a 77° seat angle. Compared to the Following and Wreckoning models it has a longer reach which translates into greater capability both uphill and downhill.
The Offering is the Evil MTB that has a shorter fork to keep maneuverability high, a more vertical seat tube to make climbing easier, and a 140 mm rear shock that absorbs all impacts coming from the ground.
The flip-chip allows you to raise/lower the bottom bracket height: when it is set to "low" the bike is agile and fast and is perfect for pedaling on trails. When it is set to "X-LOW" the bottom bracket is lowered by 11 mm, the head tube angle is slackened to increase stability and confidence on steeper terrain at high speeds.
The flip-chip can be configured in six different modes: use the Offering in the standard orientation (LOW) with an ultra-efficient forward pedaling position, or in X-LOW with a set of aftermarket angles slackened by 1.5 degrees to expand your comfort zone on the steeps.
The flip-chip positions the rider where the rider wants to be.
The SUPERBOOST+ rear spacing allows for mounting larger tires and, compared to previous models, the axle hardware is larger and the frame is stiffer. Rubber protection on the stays and the chain guide help keep the chain quiet.
MAIN FEATURES OF BICI EVIL OFFERING V2 LYRIK/PUSH:
- More vertical seat tube angle.
- Short 430 mm chainstays.
- Internal cable routing.
- 157 mm Superboost spacing. More room for tires and chain.
- Wider main axle and larger hardware. Rear triangle unified in a single piece for greater stiffness and strength.
- Stealth rubber with Sound Mounds.
- Rubber protection on the stays.
- Integrated chain guide, perfetto for 30/32/34/36 chainrings.
TECHNICAL SPECIFICATIONS
- FRAME: Offering V2 Frameset.
- HEADSET: cane creek 40 Series Evil MTB Headset.
- SHOCK: Push ELEVENSIX-RT - Offering - 185-200 lbs.
- FORK: rockshox Lyrik Ultimate 2.1 RC2 - 29 - 150 - 42mm Offset.
- DRIVETRAIN: sram X01 Eagle base Kit - SB+.
- HANDLEBAR: Evil Boomstick Carbon Handlebar.
- STEM: Evil 12 Gauge Stem / Length: 35mm.
- GRIPS: The Bartender pro super soft Greg Minnaar Signature Grip Burgtec black.
- SEATPOST: bike yoke Revive Dropper Seatpost - 30.9mm - 160mm.
- sella: wtb Volt pro Saddle - 142mm - black-white.
- WHEELS: e*thirteen LG1 Wheelset - 29 SB+ - Alloy - sram.
- TIRES: maxxis Minion DHF - 29x2.5 3CG/TR WT / maxxis Minion DHR II - 29x2.3 F60 3C/EXO/TR.
- SEALANT: Sealant.
- BRAKES: sram code rsc.
Evil
EVIL THE EPOCALYPSE FOX XT LOOPHO...
€14.005,60
EVIL THE EPOCALYPSE FOX XT LOOPHOLES HYDRA BIKE
The EVIL THE EPOCALYPSE BIKE is the prima e-mtb from the casa in Bellingham. The bike takes inspiration from the Wreckoning, features a carbon fiber frame, 29” wheels and the capacity, sizes and suspension for the most demanding off-road use. It also has the typical Delta System suspension layout designed by Dave Weagle for Evil and modified for the adoption of the Shimano EP8 motor.The bike has 166 mm rear travel, a Fox 38 Factory fork, Fox Float X2 Factory shock, one-piece rear triangle with SuperBoost thru-axle (12x157 mm) and can fit 220 mm rotors and tyres up to 2.6".
EVIL THE EPOCALYPSE FOX XT LOOPHOLES HYDRA BIKE MAIN FEATURES:
Shimano EP8 motor that pumps up to 85 Nm of torque into the pedals.
The integrated 630 Wh battery is the meeting point between maximum range and minimum weight. The way these watts are consumed or conserved depends only on you.
The EP8 motor with Evil tuning offers two power profiles to go wild with: profile 1 delivers the maximum Epocalyptic watts while profile 2 delivers more conservative power, so you can cover the distance without fear of an unexpected stop.
The Shimano E-Tube Project app allows you to adjust support and assist modes and torque settings for a truly customized experience.
35 mm carbon handlebar with internal cable routing. It has a 35 mm rise, 5° upsweep and 8° backsweep and is suitable for a width of 760-810 mm.
The new split-yoke design allows us to keep short 442 mm chainstays, enabling riders to maneuver on incredibly technical climbs and easily lift for manuals and trail features. The combination with a wider main pivot and a unified one-piece rear triangle results in greater stiffness and strength, so you can flex on your riding buddies instead of on your bike.
The wide 157 mm dropout spacing allows us to achieve a wider, stiffer spoke pattern and a wider rear end. The rear-end design has been conceived to support tyre clearance around a 29 x 2.6" tread, allowing you to have all the rubber you need to keep the wheels on the ground without sacrificing the playful feel of the rear end.
The flip-chip allows you to lower the bottom bracket and slacken the front end for a more aggressive position, without changing the characteristic DELTA leverage curve.
A robust custom skid plate, an integrated chain guard and rubber stay protection safeguard the bike.
THE BIKE IS DELIVERED PRE-ASSEMBLED BY US*
TECHNICAL SPECIFICATIONS
FRAME: Evil Epocalypse, carbon fibre, 166 mm (6.5 in) travel.
SHOCK: Fox Float X2 Factory.
FORK: Fox 38 Factory GRIP2, 170 mm (6.7 in) travel.
DRIVE SYSTEM: Shimano EP8 motor, Shimano 630 Wh battery.
DRIVETRAIN: Shimano XT (1×12).
WHEELS: Evil Loophole rims, Industry 9 Hydra hubs, Maxxis Minion DHF 3C MaxxTerra EXO 29×2.5 in WT (f and r) tyres.
BRAKES: Shimano XT BR-M8120, 203 mm rotors.
HANDLEBAR/STEM: Evil Energy Bar, 800 mm / Evil 12 Gauge, 45 mm.
SADDLE/SEATPOST: BikeYoke Revive / WTB Volt, medium width.
HEADSET: Cane Creek 40 Series ZS Integrated Tapered Headset - Cups: ZS44/28.6 (Upper) and ZS62/40 (Lower), Bearing: 36° x 45° - 41 mm (Upper) and 36° x 45° - 52 mm (Lower) ZN40 Zinc Coated, Crown Race: 28.6 mm x 36° Integrated (Upper) and 40 mm x 36° Press Fit (Lower).
HEADSET SPACERS: Alloy spacers 5 mm black
HANDLEBAR: Evil Enerygy Bar, UD Carbon, Rise: 35 mm, Clamp: 35 mm, Width: 780-810 mm, Backsweep: 8°, Upsweep: 5°.
STEM: Evil 12 Gauge, Clamp: 35 mm, Length: 45 mm.
DISPLAY: Shimano SC-EM800.
ASSIST SWITCH: Shimano SW-EM800-L.
GRIPS: Evil Palmela Handerson lock-on.
FRONT BRAKE: Shimano XT BR-M8120, 4-piston.
REAR BRAKE: Shimano XT BR-M8120, 4-piston.
FRONT ROTOR: Shimano XT RT-MT800, 203 mm, Center Lock.
REAR ROTOR: Shimano XT RT-MT810, 203 mm, Center Lock, Integrated magnet.
SHIFTER: Shimano XT SL-M8100-R, I-Spec.
REAR DERAILLEUR: Shimano XT RD-M8100.
CASSETTE: Shimano XT CS-M8100-12, 10-51T.
CHAIN: Shimano XT CN-M8100, 118 links.
CRANKS: Shimano XT FC-M8150, 170 mm.
SEALANT: Stan's No Tubes Tubeless Sealant.
SEATPOST: Bike Yoke Revive, S:125 mm, M:160 mm, L:185 mm XL:185 mm.
SADDLE: WTB Volt Medium, Width: 142 mm, Chromoly saddle.
BATTERY CHARGER: Shimano Charger EC-8004-2 (USA/Canada).
*PRO-M STORE OFFERS A FREE BIKE PRE-ASSEMBLY SERVICE: SEATPOST, FORK, DERAILLEUR AND BRAKES ARE ALREADY INSTALLED
Evil
EVIL DERAILLEUR HANGER CALLING / ...
€25,00
EVIL CALLING / FOLLOWING MB / INSURGENT V1 & LB / WRECKONING V1 & LB DERAILLEUR HANGER
Derailleur hanger for the following Evil models:
Insurgent V1
Insurgent LB
Wreckoning V1
Wreckoning LB
Calling
Following MB
ITEM CODE
DERA02
Evil
EVIL CHAMOIS HAGAR FRAME
€1.754,34
€2.698,99
EVIL CHAMOIS HAGAR FRAME
The Chamois Hagar sfida classification and conveys excitement, taking what we knew gravel to be and redefining it. With uno spazio for 700 x 50c tires, 430mm chainstays, a 66.67-degree head tube angle, 80mm bottom bracket drop, actual reach and wheelbase measurements, and a wide gamma of customizable configurations.
EVIL CHAMOIS HAGAR FRAME main features:
Spazio for 700 x 50c tires
430mm chainstays
66.67-degree head tube angle
80mm bottom bracket drop
Actual reach and wheelbase measurements
TECHNICAL SPECIFICATIONS
Fork height (Axle-Corona): 428mm
Fork offset: 57mm
Head tube: Tapered 1 1/8" - 1 1/2"
Headset: CaneCreek 40-Series, Bearings: 36° x 45° - 41mm (upper) and 36° x 45° - 52mm (lower) ZN40 galvanized (without race) with preload cap
Seatpost diameter: 30.9mm
Seat clamp diameter: 34.9mm
Rear wheel diameter: 700c
Maximum rear tire size: 700x50c
Bottom bracket shell: 68mm threaded
Chainline: 49mm
Chainguide mount: n/a
Maximum corona size: 48t single – 50/34t double
Minimum corona size: 36t single – 46/36t double
Rear wheel spacing: 142mm x 12mm
Front derailleur: Direct mount
Maximum rear rotor size: 160mm
Fork axle specification: 100x12mm