fox

FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 F-S 170 GRIP2 HSC/LSC ORNG KX110 R44 2023-2024 FORK The FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 F-S 170 GRIP2 HSC/LSC ORNG KX110 R44 2023-2024 FORK is perfect to be mounted on Enduro MTBs with 170 mm of travel. It has the same revolutionary features as the 36 but redefines the characteristics of a long-travel single-crown fork and sets a new benchmark in terms of safety, performance, and durability. The floating axles offer a clear performance advantage thanks to their unique ability to match the exact width of the fork wheel mounting surface with the spacing of the front hub flange, thus creating perfect frame alignment and eliminating unwanted friction between the upper and lower fork legs. The floating axles ensure a much smoother suspension movement along the entire travel of the fork, greatly improving sensitivity and overall ride quality.The Fox 38 fork is equipped with a new quick-release lever floating axle system, patent pending, which combines the advantages of a floating axle with the ease of a tool-free quick release. With this system, the spacing is locked by a floating sleeve, which allows you to remove and reinstall the front wheel repeatedly while maintaining perfect fork alignment. The positioning of the floating sleeve is factory preset, so if you are not sure how to use the floating axle system or simply do not want to deal with it, you can simply install the front wheel and continue your ride.The Kabolt-X axle is a lightweight floating axle that reduces weight and increases torsional rigidity thanks to its single-sided axle design without a sleeve. Frame alignment must be reset every time the front wheel is removed and reinstalled on both the Kabolt-X floating axle and the 40 one, but the end result is the same: perfect alignment and perfect performance.When the fork compresses, the air volume inside the lower legs decreases, increasing air pressure. The more the fork compresses, the more the pressure increases. This effect can have the undesirable consequence of preventing full travel from being reached. The bypass channels, positioned at the bottom of the fork, help to alleviate this problem by drastically increasing the air volume inside, thus reducing the amount of unwanted additional pressure ramping.The lower leg oil is circulated to the top of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.The lower leg bleed system allows pressure equalization with the simple press of a button. Pressure build-up in the lower legs drastically reduces fork performance, preventing maximum travel from being reached and decreasing sensitivity and responsiveness on small bumps.Our brand-new lower leg design has been studied to reduce every possible gram, without compromising the stiffness and strength required by modern enduro and gravity bikes.The arch design of this fork is intended to match perfectly with modern Enduro and Downhill bikes. Head tube profiles have become increasingly larger and fork offsets increasingly shorter. The new arch shape takes this need into account, protruding forward to provide ample clearance for the head tube at maximum compression.The Grip2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustment. It includes Variable Valve Control (VVC) technology, which allows fine external tuning of suspension performance. GRIP2 allows you to achieve, with the simple rotation of a knob, what usually requires the long and complicated task of fully disassembling and reassembling the fork.The EVOL technology increases the volume of the negative air spring, optimizing small bump sensitivity. The linear EVOL spring curve offers greater suppleness at the beginning of the travel, more support in the mid-stroke, and a more adjustable end-stroke progression. The advantages of this technology are further enhanced by the new channels for the lower legs and the bleed valves that reduce the air pressure trapped in the lower legs, allowing the EVOL air spring to operate freely without unwanted interference.The Factory series products are characterized by the original ultra-durable and slippery Kashima coating. FOX 38 FLOAT FACTORY KASHIMA FLOAT 29 F-S 170 GRIP2 HSC/LSC ORNG KX110 R44 2023-2024 FORK MAIN FEATURES: Wheel size: 29". Travel: 170 mm. Rake: 44, Axle: 15QR x 110. Upper tube finish: Kashima Coat. Canali d'aria. Bleed valves. Floating axle. Brake disc size: 180 mm direct mount, compatible up to 230 mm. Possibility to mount a (optional) FOX 36/38 mudguard with strong 4-point direct mount. FLOAT EVOL air spring. Tapered 1.5 steerer. GRIP2 ADJUSTMENT High-speed compression (w/VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (w/VVC) 8 clicks. Low-speed rebound 16 clicks. ITEM CODE 60X91021107

The legend of Downhill Frozen on the highest step of the podium and developed in the crucible of World Cup competitions, the 40 is the ultimate DH race fork. The GRIP X2 damper now offers even more tuning and traction than before, ensuring that the 40 stays firmly in its place. Grip x2Top-level downhill performance with increased traction and even greater control at speed. The most adjustable, stiffest and smoothest damper created by fox for descents. Floating axleThe 40’s floating thru-axle allows perfect frame alignment, reducing friction between the upper and lower fork legs and ensuring much smoother suspension movement. Lower leg bleeders and bypass channelsPush-button pressure equalization (bleeders) and increased volume to alleviate the pressure ramp (bypass channels) improve sensitivity and responsiveness on small bumps. FOX 40 FLOAT FACTORY GRIP X2 20X110 BOOST 29 RAKE 52MM 11/8 203MM FORK KEY FEATURES: Chassis: Standard Wheel size: 29" Travel: 203 mm Damper: Grip X2 Damper controls: HSC - LSC - HSR - LSR Axle: 20TAx110 Rake: 52 mm Steerer: 1.125 tapered Upper tube finish: Kashima Air channels: Yes Bleeders: Yes Floating axle: Yes Rotor size: 203 Direct Post Mount, compatible up to 230 Mudguard mounting: Optional FOX 40 mudguard with robust 4-point direct mount Air spring Actual weight: 2867 g (40, 29, F-S, 200, Grip X2, Kabolt) Damping: Grip X2 Travel: 203 mm Stanchion diameter: 40 mm Stanchion material: Aluminum Mount: Post mount Headset diameter: 1" 1/8 (28.6 mm) Spring: Float Lower leg material: Magnesium Version: 20 mm thru-axle Crown material: Forged aluminum Offset: 52 mm Wheel size: 29"

The Fox 38 Float Factory 29” with 170 mm of travel is a benchmark fork for enduro riding, designed to deliver maximum stiffness, control, and performance on the most demanding terrain. The Kashima coating enhances smoothness, while the GRIP X2 damper provides full adjustment options for a precise setup. Robust, sensitive, and highly tunable, it is the ideal choice for demanding riders seeking the highest levels of reliability and performance. FOX FLOAT 38 FS 29 GRIP X2 170 MM 15X110 1.5T RAKE 44 MM KEY FEATURES: Series: Factory Steerer: Standard Wheel size: 29 inches Travel: 170 mm Stanchions: 38 mm with Kashima coating Offset: 44 mm Rotor size: 200 mm Direct Post Mount, compatible up to 230 mm Bleed valves: Yes Fender mount: FOX 36/38 optional fender with robust 4-point direct mount system Air spring: FLOAT EVOL GlideCore Weight: 2360 g (29, F-S, 180, Grip X2, Kabolt X) Damper: GRIP X2 (fully adjustable)

FOX SHOX PODIUM FACTORY 29 GRIP X2 58HT 44MM OFFSET 170MM TRAVEL FORK The Fox shox Podium factory 29'' is an inverted-stanchion fork, designed for downhill, intended for enduro racing, e-MTB, and downhill. It combines the feel and geometry of a single-crown fork with the stiffness and smoothness of a dual-crown. The Podium sets a new benchmark for single-crown fork performance. Thanks to exceptional torsional stiffness, ultra-smooth travel, and the security of a DH fork, it offers an unprecedented advantage to both enduro athletes and everyday riders. Regarding damping, the Fox Podium benefits from GRIP X2, the most adjustable, supple, and smooth downhill cartridge ever created by FOX, while the 20 mm Boost thru-axle provides greater torsional stiffness. FOX SHOX PODIUM FACTORY 29 GRIP X2 58HT 44MM OFFSET 170MM TRAVEL FORK KEY FEATURES: Construction: single-crown inverted stanchions Wheel diameter: 29" Crown diameter: 58mm Travel: 170mm Damping: GRIP X2 (HSC - LSC - HSR - LSR) Axle: 20 x 110mm Boost Offset 44mm Steerer tube: 1.5 Tapered Rotor diameter: 200mm Post mount, 230mm max Spring element: FLOAT chambers with GlideCore floating piston Adjustments: preload, high- and low-speed rebound, high- and low-speed rebound Stanchions: 47 mm Compatible with e-bikes Manufacturer-stated weight approx.: 2695g IN THE BOX stella nut Carbon fiber stanchion guards Alternative brake hose clamp 6 volume spacers Manual FOX sticker

FOX SEALS FOR 36 FLOAT FORK Seals for 36 Float NA fork 2015-2017. ITEM CODE 60X80300588

COMPLETE SEAL KIT FOX DHX2 2021 Complete seal kit for Fox DHX2 2021 shock. ITEM CODE 60X80301488

FOX FLOAT X DPX2 AIR VOLUME TUNING KIT MAIN FEATURES: - Adjusts the compression curve and resistance - Compatible with fox racing shox Float cx / DPX2 - Ideal solution to optimize performance and modify the shock absorber, adapting it to your riding style

FOX FLOAT X SHOCK OIL KIT UP TO 2017 Float X shock oil kit (up to 2017). ITEM CODE 60X80300826

FOX SEAL KIT FOR FLOAT X2 UP TO 2018 Replacement seal kit for FOX Float X2 up to 2018 (all sizes, except 8.75 x 2.75). ITEM CODE 60X80300951

FOX FLOAT DPX2 2024 SHOCK SEAL KIT Seal kit for Fox DPX2 2024 shock, oil side, created for the maintenance of Fox DPX2 2024 shocks. ITEM CODE 60X80304011

FOX GRIP CARTRIDGE SEAL KIT COMPATIBLE WITH 32-34-36-40 2017-2018 MODELS GRIP cartridge seal kit for 32, 34, 36, 40 model (2017 / 2018). ITEM CODE 60X80301141

FOX GRIP2 36 AND 40 CARTRIDGE SEAL KIT UP TO 2020 GRIP2 cartridge seal kit for 36 and 40 models (up to 2020). ITEM CODE 60X80301316

EXTERNAL SKF SEALS KIT FOX RACING SHOX 36 MM The external SKF seals kit for FOX RACING SHOX 36 MM forks allows you to maintain a high level of performance of the fork. This seals kit is compatible with the new 20w gold oil. Weight: 28 g. ITEM CODE 803-00-933