Burgtec
BURGTEC ENDURO MK3 HANDLEBAR STEM...
€125,91
€139,90
BURGTEC ENDURO MK3 HANDLEBAR STEM 35 MM
The BURGTEC ENDURO MK3 HANDLEBAR STEM 35 MM is perfect for tackling all trails with total carefree confidence. The steering tube clamping surface has been increased to give a sense of sturdiness and solidity and to get as close as possible to the MK3 Direct Mount handlebar mount. Stainless steel bolts keep rust away. The handlebar mount is CNC-machined anodized.
BURGTEC ENDURO MK3 HANDLEBAR STEM 35 MM MAIN FEATURES:
Forged and CNC-machined handlebar mount from AL6061 - T6 Aluminum
Stainless steel bolts
Length 35 mm
Clamp: 35 mm
ARTICLE CODE
3413 (Color: Blue) / 3418 (Color: Gold) / 3415 (Color: Kash Bronze) / 3411 (Color: Black) / 3416 (Color: Iron Bronze Orange) / 3414 (Color: Purple) / 3419 (Color: Toxic Barbie) / 3412 (Color: Race Red) / 3417 (Color: Rhod Silver)
Burgtec
BURGTEC ENDURO STEM 35X50MM
€134,91
€149,90
BURGTEC ENDURO STEM 35X50MM
The BURGTEC ENDURO MK3 35x50 HANDLEBAR CLAMP is everything you need to ride confidently on any trail, when you need to be perfect to the centimeter.
BURGTEC ENDURO STEM 35X50MM MAIN FEATURES:
Clamp: 35 mm.
Weight: 120 g.
Machined with CNC.
Length: 50 mm.
Burgtec
BURGTEC MK2 STEM DIAMETER 35 MM
€116,90
€129,89
BURGTEC MK2 STEM DIAMETER 35 MM
The BURGTEC MK2 STEM DIAMETER 35 MM MORTISE, CNC‑machined and lightweight, is rigid: it maintains all the rigidity of the MK1 handlebar stem but is lighter, making it even more precise during steering.
BURGTEC MK2 STEM DIAMETER 35 MM MAIN FEATURES:
Clamp diameter 35 mm.
Rise 0°.
Stack height: 40 mm.
Reach 50 mm.
Fully CNC machined.
Fits Rockshox Boxxer, Fox 40, any other fork that uses IS mount.
Sold with steel bolts.
ARTICLE CODE
3291 (Color: Black) / 3296 (Color: Orange) / 3292 (Color: Red)
Burgtec
BURGTEC PEDAL AXLE 10MM
€5,94
€6,60
BURGTEC PEDAL AXLE 10MM
Can’t fit the bushing into your flat MK4 or MK5 pedals? Don’t worry, this bushing fits perfectly.
ITEM CODE
1483
Burgtec
CRANK BOLT BURGTEC SHIMANO
€9,00
€10,00
BOLT FOR CRANKSET BORGTEC SHIMANO
Crankset preload bolt for Shimano Hollowtech II. The product requires a minimum torque and must not exceed the maximum torque recommended by manufacturers, from 0.7 to 1.5 Nm.
ADAPTED TO:
- Saint FC-M800, FC-M820, FC-M825; XTR FC-M9000, FC-M985; XT M7100, FC-M8000, FC-M785, FC-M782, FC-M780, FC-M771, FC-M770, FC-M761, FC-M760;
- SLX M6100, FC-M7000, FC-M675, FC-M672, FC-M670, FC-M677, FC-M665, FC-M660; ZEE FC-M645, FC-M640; LX FC-M583, FC-M582; Deore FC-M612, FC-M610, FC-M615, FC-M617, FC-M591, FC-M590; EBike M8000, M8050; Trekking FC-T781, FC-T780, FC-T551, FC-T8000; FC-M532, FC-M542, FC-M545, FC-M552, FC-M590, FC-M596, FC-M591, FC-M610, FC-M617, FC-M660, FC-M665, FC-M770, FC-M771, FC-M780, FC-M785, FC-M6000, FC-M6100, FC-M7000, FC-M7100, FC-M8000, FC-E8000 (EBike), FC-M9000; FC-M622, FC-M625, FC-M627, FC-M552, FC-M545, FC-M543, FC-M542, FC-M533, FC-M532, FC-M4060, FC-M4050;
- FC-MT500-3, FC-MT700-2
ARTICLE CODE
9523 (Color: Blue) / 9528 (Color: Buillon Gold) / 9521 (Color: Black) / 9526 (Color: Orange) / 9524 (Color: Purple) / 9529 (Color: Toxic Barbie) / 9522 (Color: Red) / 9527 (Color: Silver)
Burgtec
PAIR OF BURGTEC STEEL PINS PENTHO...
€26,01
€28,90
PAIR OF BURGTEC STEEL PINS PENTHOUSE MK5 PEDALS
Replacement steel pins for Penthouse MK5 pedals.
PART CODE
1673
Burgtec
PAIR OF BURGTEC M4K COMPOSITE PED...
€11,24
€12,49
PAIR OF BURGTEC M4K COMPOSITE PEDAL SPINDLES
Pair of Burgtec replacement studs for Composite MK4 pedals. Made in SCM415 CR-MO aluminum alloy. They install with a 6 mm hex key.
ARTICLE CODE
1553
Burgtec
PAIR OF BURGTEC MK4 PENTHOUSE STE...
€25,82
€28,69
PAIR OF BURGTEC MK4 PENTHOUSE STEEL AXLES
Replacement steel pins in tempered En24T steel for Burgtec Penthouse Flat MK4 pedals. Diameter 12 mm. Mounts with 8 mm Allen key.
ARTICLE CODE
1473
Burgtec
PAIR OF REPLACEMENT PLUGS FOR BUR...
€5,75
€6,39
PAIR OF REPLACEMENT PLUGS FOR BURGTEC PENTHOUSE MK4 PEDAL BICYCLES
Pair of replacement caps compatible with BURGTEC PENTHOUSE MK4 PEDALS.
ITEM CODE
1479
Burgtec
CORONA BURGTEC GXP THICK THIN SIN...
€62,90
€69,89
CORONA BURGTEC GXP THICK THIN SINGLE OCP DM
CORONA BURGTEC GXP THICK THIN SINGLE OCP DM compatible with Sram Eagle. Works perfectly with Boost GXP drivetrain compatible with Direct Mount. Keeps the chain in position. The tooth profile, tall and differentiated, supports the chain in the most technical and abrupt sessions.
CORONA BURGTEC GXP THICK THIN SINGLE OCP DM MAIN FEATURES:
Teeth: 28, 30, 32.
Mounting diameter: direct mount.
Offset: 3 mm.
Material: aluminum.
Single chainring.
11-12 speeds.
Burgtec
CORONA BURGTEC THICK THIN 104 PCD
€49,41
€54,90
CORONA BURGTEC THICK THIN 104 PCD
Thick and thin corona perfectly suited to pair with Shimano cranks. Designed to prevent the chain from dropping even on rough terrain. Aluminumchainring. Compatible with 12-speed Hyper Glide chain.
ARTICLE CODE
8107 (Teeth: 30 - Color: Black) / 8101 (Teeth: 32 - Color: Black) / 8102 (Teeth: 34 - Color: Black) / 8108 (Teeth: 36 - Color: Black)
Burgtec
CORONA BURGTEC THICK THIN RACE FA...
€53,91
€59,90
CORONA BURGTEC THICK THIN RACE FACE CINCH
Corona compatible with RaceFace Cinch fit cranksets.
Burgtec
CORONA BURGTEC THICK-THIN RACE FA...
€62,90
€69,89
CORONA BURGTEC THICK-THIN RACE FACE CINC DIRECT MOUNT
The CORONA BURGTEC THICK-THIN RACE FACE CINC DIRECT MOUNT offers the mechanical advantage of increased transmission. Through numerous prototype tests with varying degrees of ovality, it has been found that 115% (from the center upward) is optimal. This appropriately reduced the dead spot and provided the same perfect chain retention and quiet operation of round sprockets. Shortening the dead spot at the top and bottom of the power curve allows returning sooner to the power phase of pedal rotation.
CORONA BURGTEC THICK-THIN RACE FACE CINC DIRECT MOUNT MAIN FEATURES:
All Burgtec sprockets are +/- 2 teeth, therefore: 30T has a combination of increased power phase with 32T and dead spot of 28T. 32T has a combination of increased power phase with 34T and dead spot of 30T.
To choose the right sprocket, refer to the currently mounted one.
Thick and thin tooth profile with Mud Bleed.
10, 11, and 12-speed compatible.
115 degrees of ovality.
Fully CNC machined from 7075 aluminum.
Burgtec
CORONA OVAL BURGTEC OVAL THICK-TH...
€49,41
€54,90
CORONA OVAL BURGTEC OVAL THICK-THIN GXP BOOST 3 MM OFFSET
The CORONA OVAL BURGTEC OVAL THICK-THIN GXP BOOST 3 MM OFFSET offers the mechanical advantage of greater transmission. Through numerous tests of prototypes with varying degrees of ovality, it has been found that 115% (from the center upwards) is optimal. This adequately reduced the dead spot and gave the same perfect chain retention and quiet operation as round chainrings. The shortening of the dead spot at the top and bottom of the power curve allows returning to the power phase of pedal rotation sooner.
OVAL BURGTEC OVAL THICK-THIN GXP BOOST 3 MM OFFSET MAIN FEATURES:
All Burgtec chainrings are +/- 2 teeth, so: 30T has a combination of increased power phase 32T and dead spot 28T. 32T has a combination of increased power phase 34T and dead spot 30T. To choose the right chainring, refer to the currently mounted one.
Thick and thin tooth profile with Mud Bleed.
10, 11 and 12-speed compatible.
115 degrees of ovality.
Fully CNC machined from 7075 aluminum.
Burgtec
CORONA OVAL BURGTEC THICK THIN CI...
€53,91
€59,90
CORONA OVAL BURGTEC THICK THIN CINCH CHAINRING
The CORONA OVALE BURGTEC THICK THIN CINCH CHAINRING offers maximum confidence in shifting and is compatible with RaceFace Cinch fit cranks. Through numerous prototype tests with varying degrees of ovality, it has been found that 115% (from the center upwards) is optimal. This adequately reduces the dead spot and provides the same perfect chain retention and quietness of round chainrings. Shortening the dead spot at the top and bottom of the power curve allows you to return to the power phase of pedal rotation sooner.
CORONA OVALE BURGTEC THICK THIN CINCH CHAINRING KEY FEATURES:
Compatible with RaceFace Cinch fit cranks.
All Burgtec chainrings are +/- 2 teeth, so: 30T has a combination of increased power phase 32T and dead spot 28T. 32T has a combination of increased power phase 34T and dead spot 30T.
To choose the right chainring, refer to the one currently mounted.
Thick and thin tooth profile with Mud Bleed.
10, 11, and 12-speed compatible.
115 degrees of ovality.
Fully CNC machined from 7075 aluminum.
Burgtec
UNIVERSAL DROPOUT BURGETC UDH
€44,91
€49,90
FORCELLINO UNIVERSALE BURGETC UDH
Universal stop suitable to replace the original damaged one. Forged and fully machined in aluminum, it follows the SRAM design incorporating a mechanism that allows backward rotation in case of forward impact. Sold with mounting washer and screw.
UNIVERSAL DROPOUT BURGETC UDH
Compatible with all frames designed to accommodate SRAM UDH.
Compatible with all MTB and E-MTB drivetrains.
Forged and fully machined in 7075 aluminum.
Supplied with mounting screw and washer.
Through-axle diameter M12 x 1.0.
Burgtec
GOPRO FACEPLATE BURGTEC MK2
€44,91
€49,90
GOPRO FACEPLATE BURGTEC MK2
Spare part with mount for GoPro. 35 mm.
ARTICLE CODE
3323 (Color: Blue) / 3328 (Color: Gold) / 3326 (Color: Orange) / 3324 (Color: Purple) / 3322 (Color: Red)
Burgtec
BURGTEC PENTHOUSE MK5 REPLACEMENT...
€11,97
€13,30
BURGTEC PENTHOUSE MK5 REPLACEMENT KIT
The 32-pin kit for a pair of BURGTEC PENTHOUSE Mk5 pedals helps you regain the original grip of the pedals. Stainless steel pins.
ARTICLE CODE
1674
Burgtec
BURGTEC M4K COMPOSITE PEDAL REPLA...
€23,40
€26,00
PEDAL REPLACEMENT KIT FOR BURGTEC M4K COMPOSITE
Replacement kit for BURGTEC M4K composite pedals to keep the pedals in perfect working order with new internal components.
THE KIT INCLUDES:
2 gaskets.
2 x large bushing.
2 bearings.
2 end caps.
1 left-hand nut.
1 right-hand nut.
2 washers.
BURGTEC M4K COMPOSITE PEDAL REPLACEMENT KIT
1551
Burgtec
BURGTEC PENTHOUSE MK3 PEDAL REPAI...
€18,72
€20,80
BURGTEC PENTHOUSE MK3 PEDAL REPAIR KIT
Kit to repair the pedal axle joints on BURGTEC PENTHOUSE MK3 pedals.
DISCOUNT CODE
1375
Burgtec
BURGTEC PENTHOUSE MK5 PEDAL REPAI...
€18,72
€20,80
BURGTEC PENTHOUSE MK5 PEDAL REPAIR KIT
The refurbishment kit for a pair of BURGTEC PENTHOUSE Mk5 pedals allows you to repair the pedal axle joints.
PART NUMBER
1675
Burgtec
BURGTEC MK5 PEDAL MAINTENANCE KIT
€28,80
€32,00
BURGTEC MK5 PEDAL MAINTENANCE KIT
Everything you need to keep your Penthouse Flat MK5 pedals looking like new.
THE KIT INCLUDES:
Tool for removing bushes and small bearings.
Small press tool for bushes.
Large bush press tool.
Bearings press tool.
PART CODE
1681
Burgtec
BURGTEC MK4 ALUMINUM PEDAL REPAIR...
€18,72
€20,80
BURGTEC MK4 ALUMINUM PEDAL REPAIR KIT
The refurbishment kit for a pair of BURGTEC Mk4 aluminum pedals allows repairing the pedal articulation axles.
PART NUMBER
1475
Burgtec
MANOPOLE BURGTEC THE BARTENDER
€17,91
€19,90
MANOPOLE BURGTEC THE BARTENDER
The MANOPOLE BURGTEC THE BARTENDER is ultra-thin and tapered with a diameter of 30 mm. The grip locks firmly to the handlebar thanks to a 7075 aluminum collar and a stainless steel bolt. The rubber compound and the knurling provide excellent grip and high traction.
MANOPOLE BURGTEC THE BARTENDER MAIN FEATURES:
Weight 90 g.
"Low Profile" design.
Diameter 30 mm.
ARTICLE CODE
5503 (Color: Blue) / 5509 (Color: Grey) / 5505 (Color: Gum) / 5501 (Color: Black) / 5507 (Color: Orange) / 5508 (Color: Purple) / 5502 (Color: Red) / 5506 (Color: Yellow)