-37% sale
PARK TOOL CHAIN WHIP FOR 7-13 SPEED CASSETT... €32,90 €51,80
The Park Tool SR-12.2 is the workshop chain whip that holds the cassette in place while you unscrew the lockring. This Park Tool SR-12.2 chain whip for cassettes works with 7 to 13 speed road and mountain cassettes, including SRAM eTap AXS and Shimano XTR drivetrains. Removing a cassette takes two tools working together: the lockring tool, fitted into the splines, and the chain whip, which wraps a cog with its section of chain and stops the cassette from turning. The body of the SR-12.2 is heat-treated so it does not bend or flex under load, while hardened pins keep the chain firmly in place. The long, ergonomically molded handle, with an overall length of 35.5 cm, gives you the leverage you need and a comfortable grip. At the opposite end there is a 1" (25.4 mm) box-end wrench to drive Park Tool freewheel and cassette lockring tools, so everything is in a single tool. Where to use the Park Tool SR-12.2 chain whip Removing the lockring of 7 to 13 speed road and mountain cassettes. SRAM eTap AXS and Shimano XTR cassettes. Single-speed cassettes with a 3/32" cog. Driving Park Tool freewheel and cassette lockring tools with the 1" wrench. Why choose the Park Tool SR-12.2 Heat-treated body that resists bending and flexing. Hardened pins that keep the chain in place. Long, ergonomic handle for leverage and comfort. Built-in 1" box-end wrench for Park Tool lockring tools. Wide compatibility, from 7 to 13 speed. For anyone who changes cassettes regularly, at the workbench or in the home garage, the Park Tool SR-12.2 chain whip is the reference tool for working safely on every modern drivetrain. TECHNICAL SPECIFICATIONS GeneralCode: SR-12.2Type: chain whip / sprocket removerBuilt-in wrench: 1" (25.4 mm) box-end for Park Tool lockring tools DimensionsLength: 35.5 cm (14") MaterialsBody: heat-treatedPins: hardenedHandle: ergonomically molded CompatibilityCassettes: 7 to 13 speed, road and mountain, including SRAM eTap AXS and Shimano XTRSingle speed: cassettes with a 3/32" cog
-37% sale
PARK TOOL ADJUSTABLE PIN SPANNER 2.2MM FOR ... €27,90 €44,10
The Park Tool SPA-6 is a heavy-duty adjustable pin spanner designed to remove the retaining rings of self-extracting cranksets. With the Park Tool SPA-6 adjustable pin spanner you can work precisely on Shimano, Campagnolo, SRAM and FSA self-extracting cranksets. Working on a retaining ring requires a tool that engages its holes securely: the SPA-6 does this with two pins with a nominal diameter of 2.2 mm. The adjustable width sets the distance between the pins to fit virtually all retaining rings, so a single spanner covers different brands and models without keeping a dedicated wrench for each one on the bench. The heavy-duty construction is made for frequent workshop use, and the pins are replaceable with Park Tool part 1501: when they wear, simply change them to restore the tool to full efficiency instead of replacing the whole spanner. Where to use the Park Tool SPA-6 pin spanner Removing retaining rings on self-extracting cranksets. Shimano, Campagnolo, SRAM and FSA self-extracting cranksets. Workshops servicing cranksets from different brands. Why choose the Park Tool SPA-6 Adjustable width that fits virtually all retaining rings. Pins with a nominal diameter of 2.2 mm. Sturdy construction for heavy-duty use. Pins replaceable with Park Tool part 1501. For anyone who frequently works on cranksets from different brands, the Park Tool SPA-6 adjustable pin spanner is the single tool that replaces many dedicated wrenches. TECHNICAL SPECIFICATIONS GeneralCode: SPA-6Type: heavy-duty adjustable pin spannerPins: nominal diameter 2.2 mmReplacement pins: Park Tool 1501 CompatibilityCranksets: Shimano, Campagnolo, SRAM and FSA self-extractingRings: virtually all retaining rings
-36% sale
PARK TOOL STEERER SAW GUIDE 22-33MM FOR STE... €55,90 €86,90
The Park Tool SG-6 is the threadless steerer saw guide designed for use with a steel hacksaw blade. It clamps onto the tube and guides the blade through the entire stroke, so the steerer cut comes out straight and clean instead of crooked or ragged. The body is made of a composite that will not scratch the tube, while the steel threads and steel reinforcing plate make it suitable for heavy shop use. The guide works on any round tube from 22 to 33 mm in diameter: besides 1", 1 1/8" and 1 1/4" fork steerers, it also takes handlebars and seatposts. Once clamped in place, it keeps the blade in line with the tube and the mechanic can focus on the saw stroke alone, without constantly correcting the direction of the cut. Where to use the Park Tool SG-6 steerer saw guide Shortening the steerer of a new fork before fitting the headset and stem. Reducing steerer length once the handlebar and spacer position has been set. Cutting round handlebars to adjust their width. Shortening round seatposts and other tubes from 22 to 33 mm in diameter. Why choose the Park Tool SG-6 Straight, clean cuts on steerers, handlebars and seatposts. Non-scratching composite body that protects the tube surface while you work. Steel threads and reinforcing plate to withstand daily use in a professional workshop. Compatible with 1", 1 1/8" and 1 1/4" fork steerers. Pairs with the Park Tool SAW-1 hacksaw. The SG-6 is designed for steel hacksaw blades: for carbon-specific blades such as the Park Tool CSB-1, Park Tool recommends the SG-8 guide. For anyone cutting steerers, handlebars and seatposts with a traditional blade, the Park Tool SG-6 steerer saw guide is the reference tool for precise, repeatable results. TECHNICAL SPECIFICATIONS GeneralCode: SG-6Type: saw guide for round tubesRecommended blade: steel hacksaw blade DimensionsTube diameter: 22 to 33 mm (0.87"–1.3") MaterialsBody: non-scratching compositeReinforcement: steel threads and steel reinforcing plate Compatibility1", 1 1/8" and 1 1/4" threadless fork steerersHandlebars, seatposts and other round tubes from 22 to 33 mmPark Tool SAW-1 hacksaw
-36% sale
PARK TOOL 14-PIECE SHOP CONE WRENCH SET 13-... €93,90 €146,10
The Park Tool SCW-SET.3 is the complete set of 14 shop cone wrenches for hub bearing adjustment and replacement. Designed for professional mechanics and enthusiasts who service wheels regularly, this cone wrench set includes every size Park Tool currently produces for bicycle hubs, from 13 to 28 mm, together in one package for the workbench. Each wrench uses the Park Tool "Y" head design, which adds material exactly where strength is needed, and precision sizing for an accurate fit on the wrench flats. The profile is thin enough to work even on the narrowest adjusting cones, while the military-grade industrial phosphate finish protects the steel over time. The long, vinyl-dipped handle provides leverage and comfort during the most delicate adjustments. Where to use the Park Tool SCW-SET.3 cone wrenches Adjusting the bearing play of cone-type hubs, with the right size for every adjusting cone. Removing and refitting cones during bearing replacement, with the exact size always at hand in the set. Work on narrow wrench flats, such as hub adjusting cones and suspension top caps. Not for use on wide flats such as pedals or axle nuts: this may damage the component or the wrench. Why choose the Park Tool SCW-SET.3 14 sizes from 13 to 28 mm: every hub cone wrench Park Tool currently produces, with no need to hunt for a missing size. "Y" head reinforced where strength is needed. Precision sizing for an accurate fit on the wrench flats. Thin profile suitable even for the narrowest cones. Military-grade industrial phosphate finish that protects the wrenches in everyday shop use. Long vinyl-dipped handle for effective leverage and a comfortable grip. For workshops that regularly service cone-type hubs, the Park Tool SCW-SET.3 14-piece shop cone wrench set provides every size in a single solution, without buying the wrenches individually. TECHNICAL SPECIFICATIONS GeneralCode: SCW-SET.3Number of wrenches: 14Use: hub bearing adjustment and replacement MaterialsFinish: military-grade industrial phosphateHandle: vinyl-dipped CompatibilitySuitable for: narrow wrench flats (hub cones, suspension top caps)Not suitable for: wide flats (pedals, axle nuts) ContentsCone wrenches: 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 26 - 28 mm
-36% sale
PARK TOOL CONE WRENCH 28MM PARK TOOL SCW-28 €8,90 €13,90
The Park Tool SCW-28 is the 28 mm shop cone wrench for adjusting and replacing hub bearings. This cone wrench fits the cones of some newer Shimano 20 mm thru-axle hubs (XTR, XT and Saint). The "Y" head adds material where strength is needed, while precision sizing and an industrial phosphate finish ensure an accurate fit on the cone. The thin profile lets you work even on the narrowest adjusting cones, and the long vinyl-dipped handle offers leverage and a comfortable grip. Where to use the 28 mm cone wrench Adjusting bearings in cup-and-cone hubs with 28 mm wrench flats. Cones of some Shimano 20 mm thru-axle hubs, such as XTR, XT and Saint. On Shimano hubs with 28 mm cone flats the outer locknut is often 32 mm: for that, Park Tool recommends the HCW-15 headset wrench. Not for wide wrench flats such as pedals or axle nuts, to avoid damaging the component or the wrench. Why choose Park Tool SCW-28 28 mm size dedicated to the hubs that require it. Reinforced "Y" head for strength and durability. Thin profile suited to the narrowest adjusting cones. Industrial phosphate finish and precision sizing. Long vinyl-dipped handle for leverage and comfort. If Shimano 20 mm thru-axle hubs come through your workshop, the Park Tool SCW-28 28 mm cone wrench is the size to keep within reach. TECHNICAL SPECIFICATIONS General Code: SCW-28 Size: 28 mm Head: "Y" design Use: hub bearing adjustment and replacement Materials Finish: industrial phosphate Handle: long, vinyl-dipped Compatibility Suitable for: 28 mm hub cones, some Shimano 20 mm thru-axle hubs (XTR, XT, Saint) Not suitable for: wide wrench flats (pedals, axle nuts)
-36% sale
PARK TOOL CONE WRENCH 26MM PARK TOOL SCW-26 €8,90 €13,90
The Park Tool SCW-26 is a 26 mm shop cone wrench, essential for adjusting and replacing hub bearings. Besides adjusting cones, this size also fits some suspension fork top caps. Like every Park Tool cone wrench, it has a "Y" head that adds material where the wrench is most stressed, precision sizing and a military-grade industrial phosphate finish for an accurate fit. The body is thin enough to work on the narrowest adjusting cones, while the long vinyl-dipped handle ensures leverage and comfort. How to use the 26 mm cone wrench Setting bearing play in cup-and-cone hubs with 26 mm wrench flats. Locking and unlocking cones when overhauling and replacing bearings. Working on some suspension fork top caps with narrow wrench flats. Avoid wide wrench flats such as pedals or axle nuts, to prevent damage to the component or the wrench. Why choose Park Tool SCW-26 "Y" head with more material at the critical points for strength and durability. Thin profile for the slimmest adjusting cones. Military-grade industrial phosphate finish and precision sizing. Long vinyl-dipped handle for a secure grip. Dual use: hub cones and some suspension fork top caps. To complete your bench with the 26 mm size, the Park Tool SCW-26 26 mm cone wrench offers the same build quality as the cone wrenches used in professional workshops. TECHNICAL SPECIFICATIONS General Code: SCW-26 Size: 26 mm Head: "Y" design Use: hub bearing adjustment and replacement Materials Finish: military-grade industrial phosphate Handle: long, vinyl-dipped Compatibility Suitable for: hub cones, some suspension fork top caps Not suitable for: wide wrench flats (pedals, axle nuts)
-36% sale
PARK TOOL CONE WRENCH 24MM PARK TOOL SCW-24 €8,90 €13,90
The Park Tool SCW-24 is the 24 mm shop cone wrench designed for adjusting and replacing cup-and-cone hub bearings. A single cone wrench in the exact size, to keep on the bench whenever you service a hub with 24 mm cones. The "Y" head concentrates material where the wrench is under load, while precision sizing and an industrial phosphate finish ensure an accurate fit on the wrench flats. It is thin enough to fit even the narrowest adjusting cones, and the long vinyl-dipped handle provides leverage and a comfortable grip. Where to use the 24 mm cone wrench Adjusting bearing play in cup-and-cone hubs with 24 mm wrench flats. Removing and refitting cones when overhauling or replacing hub bearings. Components with narrow wrench flats, such as adjusting cones and suspension top caps. Not for components with wide flats, such as pedals or axle nuts: this may damage the component or the wrench. Why choose Park Tool SCW-24 "Y" head reinforced where strength is needed. Thin profile for the narrowest adjusting cones. Industrial phosphate finish and precision sizing for an accurate fit. Long vinyl-dipped handle for leverage and comfort. Part of the Park Tool cone wrench range, available in every size found on bicycle hubs. For anyone who regularly services cup-and-cone hubs, the Park Tool SCW-24 24 mm cone wrench is the dedicated tool for working on the right size without compromise. TECHNICAL SPECIFICATIONS General Code: SCW-24 Size: 24 mm Head: "Y" design Use: hub bearing adjustment and replacement Materials Finish: industrial phosphate Handle: long, vinyl-dipped Compatibility Suitable for: narrow wrench flats (hub cones, suspension top caps) Not suitable for: wide wrench flats (pedals, axle nuts)
-36% sale
PARK TOOL CONE WRENCH 23MM PARK TOOL SCW-23 €8,90 €13,90
For cones with 23 mm wrench flats, the Park Tool SCW-23 is the shop cone wrench to keep on the bench. This 23mm cone wrench combines a thin profile with a long handle to adjust and replace hub bearings with precision. The "Y" head adds material exactly where strength and durability are needed, while precision sizing and a military-grade industrial phosphate finish ensure an accurate fit and consistent quality. The long vinyl-dipped handle provides leverage and a comfortable grip while you work. How to use the Park Tool SCW-23 23mm cone wrench Use it on components with narrow wrench flats: hub adjusting cones and suspension top caps. It is the right tool for adjusting and replacing hub bearings. Its thin profile lets it work even on the narrowest cones. Avoid pedals and axle nuts, which have wide flats: the wrench or the component could be damaged. Why choose Park Tool SCW-23 Thin profile suited even to the narrowest adjusting cones. Precise sizing and consistent quality in the 23 mm size. "Y" head that adds material where strength and durability are needed. Long vinyl-dipped handle, comfortable during adjustments. If you work on 23 mm cones, the Park Tool SCW-23 23mm cone wrench gives you the right grip for accurate bearing adjustment. TECHNICAL SPECIFICATIONS GeneralCode: SCW-23Type: shop cone wrenchSize: 23 mmUse: hub bearing adjustment and replacement MaterialsHead: "Y" designFinish: military-grade industrial phosphateHandle: long, vinyl-dipped CompatibilitySuitable for: components with narrow wrench flats (hub adjusting cones, suspension top caps)Not suitable for: components with wide flats (pedals, axle nuts)
-36% sale
PARK TOOL CONE WRENCH 21MM PARK TOOL SCW-21 €8,90 €13,90
The Park Tool SCW-21 21mm cone wrench is a shop tool dedicated to components with narrow wrench flats, starting with hub adjusting cones. Park Tool describes it as essential for hub bearing adjustment and replacement. The "Y" head adds material exactly where strength and durability are needed, while precision sizing and a military-grade industrial phosphate finish ensure an accurate fit and consistent quality. The long vinyl-dipped handle provides leverage and a comfortable grip while you work. How to use the Park Tool SCW-21 21mm cone wrench Use it on components with narrow wrench flats: hub adjusting cones and suspension top caps. It is the right tool for adjusting and replacing hub bearings. Its thin profile lets it work even on the narrowest cones. Avoid pedals and axle nuts, which have wide flats: the wrench or the component could be damaged. Why choose Park Tool SCW-21 21 mm size with precision sizing for an accurate fit. "Y" head reinforced where strength is needed. Military-grade industrial phosphate finish. Long vinyl-dipped handle for leverage and comfort. Precise, thin and tough, the Park Tool SCW-21 21mm cone wrench is built for everyday shop use. TECHNICAL SPECIFICATIONS GeneralCode: SCW-21Type: shop cone wrenchSize: 21 mmUse: hub bearing adjustment and replacement MaterialsHead: "Y" designFinish: military-grade industrial phosphateHandle: long, vinyl-dipped CompatibilitySuitable for: components with narrow wrench flats (hub adjusting cones, suspension top caps)Not suitable for: components with wide flats (pedals, axle nuts)
-35% sale
PARK TOOL CONE WRENCH 20MM PARK TOOL SCW-20 €8,90 €13,60
The Park Tool SCW-20 gives you a 20mm cone wrench from the Shop Cone Wrench series, which Park Tool calls the standard of the industry for quality and performance. It is the shop tool for adjusting and replacing hub bearings by working on the narrow flats of the cone. Park Tool designed the "Y" head to put more material where strength and durability are needed. Precision sizing and a military-grade industrial phosphate finish ensure an accurate, consistent fit, and the long vinyl-dipped handle lets you apply force comfortably. How to use the Park Tool SCW-20 20mm cone wrench Use it on components with narrow wrench flats: hub adjusting cones and suspension top caps. It is the right tool for adjusting and replacing hub bearings. Its thin profile lets it work even on the narrowest cones. Avoid pedals and axle nuts, which have wide flats: the wrench or the component could be damaged. Why choose Park Tool SCW-20 Thin profile suited even to the narrowest adjusting cones. Precise sizing and consistent quality in the 20 mm size. "Y" head that adds material where strength and durability are needed. Long vinyl-dipped handle, comfortable during adjustments. If the 20 mm cone comes up often in the hubs you service, the Park Tool SCW-20 20mm cone wrench is the size to keep within reach. TECHNICAL SPECIFICATIONS GeneralCode: SCW-20Type: shop cone wrenchSize: 20 mmUse: hub bearing adjustment and replacement MaterialsHead: "Y" designFinish: military-grade industrial phosphateHandle: long, vinyl-dipped CompatibilitySuitable for: components with narrow wrench flats (hub adjusting cones, suspension top caps)Not suitable for: components with wide flats (pedals, axle nuts)
-41% sale
PARK TOOL CONE WRENCH 18MM PARK TOOL SCW-18 €7,90 €13,20
The Park Tool SCW-18 is the 18 mm shop cone wrench designed for adjusting and replacing hub bearings. This 18mm cone wrench is thin enough to work even on the narrowest adjusting cones, with the precision you expect from a bench tool. The "Y" head adds material exactly where strength and durability are needed, while precision sizing and a military-grade industrial phosphate finish ensure an accurate fit and consistent quality. The long vinyl-dipped handle provides leverage and a comfortable grip while you work. Where to use the Park Tool SCW-18 18mm cone wrench Adjusting hub bearings on cones with 18 mm wrench flats. Removing and refitting cones when replacing hub bearings. Working on other components with narrow wrench flats, such as suspension top caps. Not for components with wide flats such as pedals or axle nuts: this may damage the component or the wrench. Why choose Park Tool SCW-18 18 mm size with precision sizing for an accurate fit. "Y" head reinforced where strength is needed. Military-grade industrial phosphate finish. Long vinyl-dipped handle for leverage and comfort. To add the 18 mm size to your bench, the Park Tool SCW-18 18mm cone wrench delivers the precision and toughness of Park Tool shop wrenches. TECHNICAL SPECIFICATIONS GeneralCode: SCW-18Type: shop cone wrenchSize: 18 mmUse: hub bearing adjustment and replacement MaterialsHead: "Y" designFinish: military-grade industrial phosphateHandle: long, vinyl-dipped CompatibilitySuitable for: components with narrow wrench flats (hub adjusting cones, suspension top caps)Not suitable for: components with wide flats (pedals, axle nuts)
-36% sale
PARK TOOL 37-PIECE SOCKET AND BIT SET WITH ... €155,90 €243,00
The Park Tool SBS-3.2 is a professional 37-piece set of sockets and bits for the most common bicycle repairs, plus flat sockets for suspension fork top caps. This 3/8" drive socket and bit set is designed for workshops that want every size organized and ready to hand. All pieces are made of chrome vanadium steel and share the 3/8" square drive, for use with a torque wrench, ratchet or breaker bar. The set brings together standard and long-reach hex bits, long-reach Torx-compatible bits, ten hex sockets, a 1" socket and six flat fork sockets. Every piece sits in a custom foam tray with clearly labeled sizes, so you can see at a glance if something is missing. How to use the Park Tool SBS-3.2 socket and bit set Controlled tightening of 3 to 16 mm hex bolts with the hex bits fitted to a torque wrench. Torx fasteners from T20 to T45 with the long-reach Torx-compatible bits. Hex nuts and bolts from 8 to 19 mm with the ten hex sockets. Removing and tightening suspension fork top caps with the 24 to 32 mm flat sockets; the 27 mm socket has an external taper for narrow-access fittings. Using the 1" socket with the Park Tool FR-1.3, FR-5.2 and BBT-22 for freewheels, cassette lockrings and bottom brackets. The set is not designed for impact drivers or other power tools. Why choose the Park Tool SBS-3.2 37 pieces covering everything from small hardware to fork sockets in one set. Shop-quality chrome vanadium steel. Flat sockets dedicated to suspension fork top caps. Foam tray with labeled sizes for an always tidy workbench. Single 3/8" drive compatible with torque wrench, ratchet and breaker bar. For workshops working every day on road bikes, MTBs and e-bikes, the Park Tool SBS-3.2 37-piece socket and bit set is the complete kit for precise tightening and organized work. TECHNICAL SPECIFICATIONS GeneralCode: SBS-3.2Number of pieces: 37Drive: 3/8" squareUse: hand tools only (not for impact drivers or power tools) DimensionsFoam tray: 400 x 230 mmTray height with tools: 45 mm MaterialsMaterial: chrome vanadium steel CompatibilityHandles: torque wrench, ratchet, breaker bar1" socket: Park Tool FR-1.3, FR-5.2, BBT-22 and others ContentsHex bits (8): 3 - 4 - 5 - 6 - 8 - 10 - 14 - 16 mmLong-reach hex bits (7): 5 - 6 - 8 - 10 - 11 - 12 - 15 mmLong-reach Torx-compatible bits (5): T20 - T25 - T30 - T40 - T45Hex sockets (10): 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 17 - 19 mm1" socket (1)Flat fork sockets (6): 24 - 26 - 27 - 28 - 30 - 32 mm (27 mm with external taper)Foam tray with labeled sizes
-38% sale
PARK TOOL SPOKE, BEARING AND COTTER GAUGE P... €8,90 €14,20
The Park Tool SBC-1 is the spoke, bearing and cotter gauge that has been on mechanics' benches since the 1970s. This Park Tool gauge measures spoke length, identifies the diameter of bearing balls and crank cotters, and also works as a general-purpose ruler in the workshop. The body is made of anodized aluminum with embossed markings. It carries a metric scale from 0 to 310 mm and an inch scale from 0 to 12.25", used to measure both J-bend and straight-pull spokes. The same tool features gauge holes for the most common bearing balls and for crank cotters. How to use the Park Tool SBC-1 gauge Measuring J-bend and straight-pull spoke length when building or repairing a wheel. Identifying the diameter of 1/4", 7/32", 3/16", 5/32" and 1/8" balls. Recognising 8, 8.5, 9 and 9.5 mm crank cotters. Taking general measurements in millimetres or inches, just like a normal ruler. Why choose the Park Tool SBC-1 Three functions in one tool: spoke ruler, ball gauge and cotter gauge. Metric and SAE scales on the same body. Anodized aluminum with embossed markings, built for daily use. A Park Tool classic found in workshops for decades. Compact and always useful, the Park Tool SBC-1 spoke, bearing and cotter gauge is the measuring tool to keep within reach next to the truing stand. TECHNICAL SPECIFICATIONS GeneralCode: SBC-1Type: gauge for spokes, bearing balls and crank cotters DimensionsMetric scale: 0-310 mmSAE scale: 0-12.25"Ball gauges: 1/4", 7/32", 3/16", 5/32", 1/8"Cotter gauges: 8 mm, 8.5 mm, 9 mm, 9.5 mm MaterialsBody: anodized aluminum with embossed markings CompatibilityJ-bend and straight-pull spokes
-35% sale
PARK TOOL WORKSHOP HACKSAW PARK TOOL SAW-1 €29,99 €46,10
The Park Tool SAW-1 is the workshop hacksaw designed for cutting jobs on bicycles. This Park Tool hacksaw combines a sturdy frame, a blade tension adjuster and a comfortable handle for controlled cuts on tubes and components at the workbench. The frame is all die-cast aluminum. The tension adjuster lets you set the blade tension, which needs to be kept tight for a straight, clean cut. The 32 TPI (teeth per inch) steel blade supplied as standard is suitable for steel, aluminum and titanium, and the SAW-1 accepts any standard 12" hacksaw blade. For carbon fiber components, Park Tool recommends its dedicated CSB-1 blade, available separately. Where to use the Park Tool SAW-1 hacksaw Shortening the fork steerer when building up bikes and forks. Cutting handlebars to the desired width. Cutting tubes and parts in steel, aluminum or titanium with the included blade. Cutting carbon components after fitting the Park Tool CSB-1 blade. Precision work together with the Park Tool SG-8 (for carbon fiber forks) and SG-7.2 (adjustable, oversized) saw guides. Why choose the Park Tool SAW-1 All die-cast aluminum frame. Tension adjuster to set blade tension. Comfortable handle for controlled work. 32 TPI steel blade included, for steel, aluminum and titanium. Compatible with any standard 12" blade, including the Park Tool CSB-1 for carbon. For anyone fitting forks, trimming handlebars or making clean cuts in the workshop, the Park Tool SAW-1 hacksaw is the reference tool to keep on the tool board. TECHNICAL SPECIFICATIONS GeneralCode: SAW-1Type: hacksaw with blade tension adjuster MaterialsFrame: die-cast aluminumIncluded blade: steel, 32 TPI CompatibilityBlades: any standard 12" hacksaw bladeMaterials cut with included blade: steel, aluminum, titaniumCarbon: with Park Tool CSB-1 blade (sold separately) ContentsSAW-1 hacksaw with 32 TPI steel blade
-37% sale
PARK TOOL HEAVY DUTY SHOP APRON PARK TOOL SA-3 €27,90 €44,10
The Park Tool SA-3 is the heavy duty shop apron designed for mechanics who spend the day at the repair stand. This Park Tool shop apron protects your clothes during bike maintenance and keeps the tools you use most always within reach, without walking back to the tool board or cart every time. It is organised on two levels of pockets. Down low, at waist height, there are three large pockets for gloves and bulkier tools; on the chest there are four smaller pockets for the tools you need constantly. The upper pockets can be unbuttoned so they swing freely. The crossover strap system keeps the apron close to the body and clips at the back, while the lower section can be folded up and snapped in place for a shorter fit. How the Park Tool SA-3 shop apron is organised Three lower pockets measuring 18.5 x 19 cm for gloves and large tools. Four upper pockets, 11 cm deep, that can be unbuttoned. Crossover straps clipping at the back. Overall length of 89 cm, with the lower 18 cm able to fold up. Why choose the Park Tool SA-3 Designed by Park Tool for the daily work of mechanics. Seven pockets split between waist and chest to separate large and small tools. Adjustable length thanks to the fold-up lower section. Crossover straps that keep the apron snug as you move around the bike. For anyone working at the bench every day, the Park Tool SA-3 heavy duty shop apron is the tidiest way to keep tools on you and clothes protected. TECHNICAL SPECIFICATIONS GeneralCode: SA-3Type: bib-style shop apronFastening: crossover straps clipping at the back DimensionsOverall length: 89 cm (35")Fold-up lower section: 18 cm (7")Lower pockets: 3, 18.5 x 19 cm (7.25" x 7.5")Upper pockets: 4, 11 cm (4.25") deep
-35% sale
Park Tool PARK TOOL SHOP APRON SA-1 €18,99 €29,19
The Park Tool SA-1 shop apron is the bike mechanic's work garment: a full-length black apron, about 30" (76 cm) long, covering the torso and legs down to above the knee. Put it on when you clean a drivetrain, bleed a hydraulic brake or fit a freshly lubed chain. The dark colour hides the grease and oil marks that are unavoidable in a workshop, and the front pockets keep constantly used tools within reach, such as a hex key, a screwdriver, cable cutters or a marker for setting positions. It is the natural companion to the workbench: in a pro shop it is part of every station's kit, at home it saves your everyday clothes. At the end of the job it hangs next to the repair stand, ready for the next one. When to wear the Park Tool SA-1 shop apron Cleaning and lubing the chain, cassette and chainrings.Bleeding hydraulic disc brakes and changing suspension oil.Setting up tubeless tyres with sealant.Building a new bike out of the box with all tools in your pockets.Bench or stand work when you switch between jobs all day. Why choose Park Tool SA-1 Full length of about 76 cm that protects your trousers too.Black colour suited to the workshop environment.Front pockets for small tools and parts.Park Tool branding for a coordinated workshop look. For anyone spending hours at the repair stand, the Park Tool SA-1 shop apron is the simplest way to work clean with the essential tools always on you. TECHNICAL SPECIFICATIONS GeneralCode: SA-1Brand: Park ToolType: full-length shop apronColour: blackPockets: front DimensionsLength: approx. 76 cm (30")
-36% sale
Park Tool PARK TOOL OVERSIZED HEADSET CUP R... €39,99 €62,10
The Park Tool RT-2 oversized cup remover is built for large-diameter head tubes: 1 1/4" and 1 1/2" cups, as found on tapered-steerer MTB, gravel and e-bike forks. It covers SHIS ZS44, ZS49, ZS55, ZS56, EC49 and EC56 and works on cups and bearings with a 38 to 55 mm inside diameter. Lower 1 1/2" cups are often the most stubborn to remove, with a wide contact area and years spent pressed in place. The RT-2 goes in from the top, the flared fingers open behind the cup lip and every mallet blow pushes evenly around the full perimeter. The tool also handles bottom bracket cups on one-piece crank systems. Before striking, check that both fingers have caught the lip: a partial hold would put all the force on one side. Park Tool RT-2 headset cup remover compatibility 1 1/4" and 1 1/2" headsets, including lower cups on tapered head tubes.SHIS ZeroStack ZS44, ZS49, ZS55, ZS56.SHIS external EC49 and EC56.Bottom bracket cups for one-piece cranks.Cups or bearings with a 38 to 55 mm inside diameter. Why choose Park Tool RT-2 Fingers sized for oversized bores, where a standard remover has nothing to bite on.Even force across the whole cup, so it comes out square without marking the head tube.25.4 mm shaft in heat-treated alloy steel with a nickel finish.Complements the RT-1: together they cover cups from 27 to 55 mm inside diameter. If you work on modern frames with tapered steerers, the Park Tool RT-2 oversized headset cup remover takes out even the largest lower cups without putting the frame at risk. TECHNICAL SPECIFICATIONS GeneralCode: RT-2Brand: Park ToolType: oversized headset cup remover MaterialsBody: heat-treated alloy steel, nickel finish DimensionsShaft diameter: 25.4 mm (1")Cup/bearing inside diameter: 38 to 55 mm CompatibilityHeadsets: 1 1/4", 1 1/2"SHIS: ZS44, ZS49, ZS55, ZS56, EC49, EC56Bottom bracket: cups for one-piece cranks
-32% sale
Park Tool PARK TOOL HEADSET AND BOTTOM BRAC... €37,99 €55,80
The Park Tool RT-1 cup remover drives pressed headset cups out of 1", 1 1/8" and 1 1/4" head tubes, including SHIS EC29, EC30, EC33, EC34 and EC37. The same tool also removes some press-fit bottom bracket cups, such as SRAM DUB, Campagnolo Power Torque and Ultra Torque. The principle is simple and repeatable: the shaft slides through the tube and the flared ends spread out behind the cup lip. Strike the tool head with a mallet and the force is spread evenly around the whole circumference, so the cup comes out straight without cocking or scoring the bore. Heat-treated alloy steel with a nickel finish stands up to blow after blow. How to use the Park Tool RT-1 headset cup remover Remove the fork and bearings, leaving only the cups in the frame.Insert the RT-1 from the opposite side and pull it through until the flared fingers catch behind the cup lip.Strike the head with a mallet, rotating the tool slightly between blows.Repeat from the other end for the second cup.Works with cups or bearings with an inside diameter of 27 to 38 mm. Why choose Park Tool RT-1 One tool for three classic steerer sizes and five SHIS EC sizes.Also usable on some SRAM DUB and Campagnolo press-fit bottom bracket cups.Force spread across the whole cup, so the bore stays in tolerance for the next install.25.4 mm shaft in heat-treated, nickel-plated alloy steel built for years on the bench. For traditional and semi-integrated 1 1/8" headsets, the Park Tool RT-1 headset cup remover is the starting point; for larger cups there is the oversized RT-2. TECHNICAL SPECIFICATIONS GeneralCode: RT-1Brand: Park ToolType: headset and press-fit bottom bracket cup remover MaterialsBody: heat-treated alloy steel, nickel finish DimensionsShaft diameter: 25.4 mm (1")Cup/bearing inside diameter: 27 to 38 mm CompatibilityHeadsets: 1", 1 1/8", 1 1/4"SHIS: EC29, EC30, EC33, EC34, EC37Bottom bracket: some SRAM DUB, Campagnolo Power Torque and Ultra Torque press-fit cups
-35% sale
Park Tool PARK TOOL 5-PIECE SNAP RING PLIER... €108,99 €165,30
The Park Tool RP-SET.2 brings together five snap ring pliers built around the needs of the bike mechanic: four for internal rings and one for external rings, with 0.9, 1.3 and 1.7 mm tips. One set covers the retaining rings in forks and shocks, brakes, dropper posts and bottom brackets. Every plier is forged from heat-treated chromoly steel and fitted with a return spring and vinyl-dipped grips. Having all sizes on the bench means you can always pick the tip that fills the ring eyelet, which is the condition Park Tool recommends for slip-free work. A tip that is too small can pop out of the eyelet and launch the ring, while one that is too large will not fit: with five pliers there is no need to compromise. The five pliers in the Park Tool RP-SET.2 RP-1: internal, straight, 0.9 mm tips, opens from 22 mm to tips touching.RP-2: internal, bent, 1.3 mm tips, opens from 22 to 2 mm.RP-3: external, bent, 1.3 mm tips, opens from 2 to 18 mm.RP-4: internal, bent, 1.7 mm tips, opens from 21 to 2 mm.RP-5: internal, straight, 1.7 mm tips, opens from 25 mm to tips touching. Why choose Park Tool RP-SET.2 Three tip diameters to match small, medium and large eyelets without forcing the ring.Straight blades for in-line grooves, bent blades for recessed or side access.A dedicated external plier for shafts and axles.Consistent build: same steel, same spring, same grips across the whole set. For a workshop servicing suspension and brakes from many brands, the Park Tool RP-SET.2 snap ring pliers set ends the hunt for the right plier mid-job. TECHNICAL SPECIFICATIONS GeneralCode: RP-SET.2Brand: Park ToolNumber of pliers: 5 (4 internal, 1 external) MaterialsBody: forged, heat-treated chromoly steelGrips: vinyl-dippedReturn spring: yes, on every plier DimensionsTips: 0.9 mm, 1.3 mm, 1.7 mmOpenings: from tips touching up to 25 mm, depending on model CompatibilityApplications: suspension, brakes, dropper posts, bottom brackets Package contentsRP-1: internal, straight, 0.9 mmRP-2: internal, bent, 1.3 mmRP-3: external, bent, 1.3 mmRP-4: internal, bent, 1.7 mmRP-5: internal, straight, 1.7 mm
-33% sale
Park Tool PARK TOOL 1.3MM BENT INTERNAL SNA... €19,90 €29,60
The Park Tool RP-2 are internal snap ring pliers with 1.3 mm tips set on 90° bent blades. They are sized for the medium retaining rings found inside suspension forks and shocks, brake calipers, dropper posts and bottom brackets. The body is forged from heat-treated chromoly steel, so the tips keep their shape through years of shop use. A return spring brings the jaws back to the closed position after every squeeze, and vinyl-dipped grips stay secure even with oily hands. The result is fine control over how far the ring closes, which matters when the groove is in aluminium and a scratch could compromise a seal. How to use the Park Tool RP-2 internal snap ring pliers Insert the tips into the ring eyelets with the pliers closed.Squeeze the handles: the tips move together and the ring contracts out of its groove.The 90° bend keeps you in line with the bore even when the ring sits deep inside.Park Tool recommends using the pliers with the largest tips that fit the eyelets: if the RP-2 fits without play, it is the right choice. Why choose Park Tool RP-2 Tip travel from 22 mm down to 2 mm covers most medium internal rings.Bent blades reach recessed grooves without levering against the part.Forged, heat-treated Cr-Mo steel for lasting precision.Pairs with the RP-3, the external version with the same 1.3 mm tips. For anyone servicing suspension and brakes regularly, the Park Tool RP-2 internal snap ring pliers prevent scratched grooves and bent rings. TECHNICAL SPECIFICATIONS GeneralCode: RP-2Brand: Park ToolType: internal snap ring pliersTips: 1.3 mm on 90° bent blades MaterialsBody: forged, heat-treated chromoly steelGrips: vinyl-dippedReturn spring: yes DimensionsTip opening: 22 mm to 2 mm (center to center) CompatibilityRings: internal snap rings with eyelets suited to 1.3 mm tipsApplications: suspension, brakes, dropper posts, bottom brackets
-31% sale
Park Tool PARK TOOL 15MM AND 9/16 INCH PEDA... €29,90 €42,90
The Park Tool PW-3 is a pedal wrench with two precision-cut openings, 15 mm and 9/16", for removing, installing and tightening pedals with wrench flats. The 15 mm opening suits most modern pedals, while the 9/16" one is for older pedals usually found on one-piece cranks. The body is chromoly steel and the 32 cm length provides the leverage needed to free even pedals that have been tight for a long time. The long, round, vinyl-dipped handle stays comfortable in the palm when you push hard, with no edges digging into your hand. How to use the Park Tool PW-3 pedal wrench Position the crank so the wrench works horizontally: you can then push with your body weight rather than just your arm.Remember the thread direction: the right pedal loosens anticlockwise, the left pedal has a reverse thread and loosens clockwise.Before fitting, grease the threads and start the pedal by hand to avoid damaging the crank thread.Do the final tightening with the wrench, using a firm, controlled movement. Why choose Park Tool PW-3 Two sizes in one tool: 15 mm for current pedals, 9/16" for vintage ones.Chromoly steel, strong and resistant to deformation.32 cm length for effective leverage on stuck pedals.Vinyl-dipped handle, comfortable and secure under load.Fixed wrench with no moving parts: nothing to adjust and no play between jaw and pedal. Simple, sturdy and built to last, the Park Tool PW-3 pedal wrench is the right tool for anyone who fits and removes pedals regularly. TECHNICAL SPECIFICATIONS GeneralItem: PW-3Openings: 15 mm and 9/16" MaterialsBody: chromoly steelHandle: round, vinyl-dipped DimensionsLength: 32 cm Compatibility15 mm: most pedals with wrench flats9/16": older pedals, typical of one-piece cranks
-36% sale
Park Tool PARK TOOL FIXED-HEIGHT CLAMP ADD-... €335,90 €522,00
The Park Tool PRS-33 FC is the fixed-height clamp add-on kit that adds a second clamp to one side of the PRS-33 or PRS-33.2 Power Lift electric stand, making it double-sided. It is the upgrade for workshops that have already chosen motorised lifting and want to make better use of the same upright. While the main clamp rises and lowers with the Power Lift motor, the kit clamp stays at the height where it is installed. On the PRS-33.2 it can be mounted anywhere on the upright, so you can choose the most comfortable working height for your shop. The clamp takes round and aero tubes from 23 to 76 mm, has 70 mm tall jaws and replaceable jaw covers. Check your stand model before buying: Park Tool lists compatibility only with the PRS-33 and PRS-33.2, not with the other stands in the range. Compatibility and installation of the Park Tool PRS-33 FC kit Compatible only with the Park Tool PRS-33 Power Lift and PRS-33.2 Power Lift stands.Mounts to one side of the stand with the hardware supplied in the kit.On the PRS-33.2 the height position is free along the whole upright.Replacement jaw covers available as part #1960. Why choose Park Tool PRS-33 FC Doubles the clamping points using a stand you already have in the shop.A fixed station next to the motorised one, useful for quick jobs or holding a bike in the queue.Same 23 to 76 mm clamping capacity as Park Tool shop clamps.Simple installation, with no changes to the stand structure. To get more from your Power Lift stand, the Park Tool PRS-33 FC fixed-height clamp add-on kit is the official accessory designed for the job. TECHNICAL SPECIFICATIONS GeneralItem: PRS-33 FCType: fixed-height add-on clamp DimensionsClamp capacity: round and aero tubes 23 to 76 mmJaw height: 70 mm CompatibilityStands: Park Tool PRS-33 and PRS-33.2 Power LiftSpare parts: jaw covers #1960 Package contentsContents: clamp and mounting hardware
-11% sale
Park Tool PARK TOOL DELUXE SINGLE ARM REPAI... €665,99 €746,80
The Park Tool PRS-3.3-2 is the deluxe single arm repair stand, the reference workstation for the mechanic who works on one bike at a time with maximum precision. It is built for daily shop use and fits just as well in the home workshop of anyone who expects professional equipment. The upright is heavy-gauge oversized steel tubing, chrome plated and powder coated, with the Park Tool lock block system securing height and clamp position without play. The stand is supplied without a base: complete it with the Park Tool #130 base or anchor it to the floor with the FP-2 floor plate, both sold separately, choosing between mobility and maximum rigidity. The 100-3D clamp on the Park Tool PRS-3.3-2 deluxe stand Cam-actuated micro-adjustment: bring the jaws to the tube and close with a consistent, controlled grip.Narrow jaws designed for short seatposts and for working in tight spaces around the frame.23 to 76 mm capacity on round and aero tubes, dropper posts included.70 mm tall jaws with replaceable jaw covers (part #1960).With carbon frames it is best to clamp the seatpost rather than the frame tubes, setting the cam pressure with the micro-adjust knob. Why choose Park Tool PRS-3.3-2 Working height from 128 to 158 cm to keep a correct posture during long sessions.Capacity up to 54 kg, enough for heavier bikes within this limit.Chrome-plated and powder-coated finish that resists grease, solvents and daily knocks.#105 cast aluminium work tray and RPP-1 post protector supplied as standard. If you are looking for the definitive stand for your bench, the Park Tool PRS-3.3-2 deluxe single arm repair stand offers stability, fine adjustment and construction built to last. TECHNICAL SPECIFICATIONS GeneralItem: PRS-3.3-2Clamp: 100-3D micro-adjust, cam-actuatedMaximum capacity: 54 kg MaterialsFrame: heavy-gauge oversized steel tubingFinish: chrome plated and powder coated DimensionsClamp height: 128 to 158 cmClamp capacity: round and aero tubes 23 to 76 mmJaw height: 70 mm CompatibilityBase: Park Tool #130 base or FP-2 floor plate (sold separately)Seatposts: compatible with dropper postsSpare parts: jaw covers #1960 Package contentsIncluded: #105 cast aluminium work tray, RPP-1 post protectorNot included: base
-36% sale
Park Tool PARK TOOL TEAM ISSUE PORTABLE FOL... €471,90 €733,50
The Park Tool PRS-25 Team Issue is the portable folding repair stand designed for taking the workshop wherever it is needed: races, events, trips or a garage where space is at a premium. At 6 kg it is one of the most complete folding stands in the Park Tool range, built to give bench-like stability away from the shop. The key is the hexagonal Hexatude aluminium tubing, a proprietary Park Tool profile that limits flex and stops the upright from rotating during work. Aluminium leg straps add stability and make folding quick. At the top, the cam-actuated 100-25D micro-adjust clamp has a 360-degree rotating head to bring the bike into the most comfortable position. How to use the Park Tool PRS-25 folding repair stand Open the legs to form the 92 x 92 x 115 cm triangular base and tension the aluminium straps.Set the clamp height between 119 and 152 cm to suit your height and the job.Clamp the tube or seatpost, dropper posts included, with the 100-25D clamp: it takes round and aero tubes up to 76 mm.Keep the bike's weight centred below the clamp and between the legs: in this condition capacity reaches 45 kg.When finished, fold the stand: folded it measures 117.5 x 22 x 21.5 cm. Why choose Park Tool PRS-25 Hexagonal Hexatude tubing: stiffness and no upright rotation, rare features in a folding stand.Clamp with 360-degree rotating head and 70 mm wide jaws for a secure hold.Compact when folded, ideal for car boot, team van or storage cupboard.Replaceable jaw covers (part #1960) to protect delicate frames and seatposts. For shop quality far from the bench, the Park Tool PRS-25 Team Issue portable folding repair stand is the benchmark of its category. TECHNICAL SPECIFICATIONS GeneralItem: PRS-25Clamp: 100-25D micro-adjust, cam-actuated, 360° rotating headMaximum capacity: 45 kg with weight centred below the clamp and between the legs MaterialsUpright and legs: hexagonal Hexatude aluminium tubingLeg straps: aluminium DimensionsWeight: 6 kgWorking height: 119 to 152 cmFolded size: 117.5 x 22 x 21.5 cmOpen base: 92 x 92 x 115 cm triangleJaw width: 70 mm CompatibilityClampable tubes: round and aero up to 76 mm, dropper posts includedSpare parts: jaw covers #1960