Ohlins
OHLINS TTX 22 M.2 230X65 AM SHOCK...
€999,18
€1.110,20
OHLINS TTX 22 M.2 230X65 AM SHOCK ABSORBER
The OHLINS TTX 22 M.2 230X65 AM SHOCK ABSORBER offers high performance, control, traction and is perfetto for gravity. The TTX22m.2 improves bottom-out performance, thanks to the new rubber cap design, and the lower part of the della sella. This significantly improves control at mid and fine stroke, thanks to a quicker, more precise and reliable start.
OHLINS TTX 22 M.2 230X65 AM SHOCK ABSORBER MAIN FEATURES:
Size: 230x65 mm.
Use: Trail and Downhill.
Possibility to simply adjust the stroke with the three 2.5 mm spacers included in the package.
Suitable for light springs with 4 Nm/23 lb increments.
External high-speed compression adjustment with three levels.
External low-speed compression adjustment with 16 clicks.
External rebound adjustment with 7 clicks.
Weight: 486 g (for a 205x65 Trunnion shock absorber).
ITEM CODE
MTBM 2208
Ohlins
ÖHLINS TTX 22M SHOCK ABSORBER - S...
€755,99
€839,99
OHLINS TTX 22M SHOCK - SJ 27.5 AM
Revolutionary shock absorber that uses the exclusive Öhlins TTX twin tube technology that keeps compression separate from rebound, extensively tested in the motorbike sector and now applied to this shock with exceptional performance.It improves ride quality by increasing stability, bump absorption and delivering excellent traction at every point of the route, with a noticeable gain both on the straight and in corners, where the cornering speed increases significantly.Adjustable in compression and rebound at high and low speeds, it is also equipped with spherical bearings that allow the suspension to move while the bicycle is subjected to lateral torsion.
OHLINS TTX 22M SHOCK - SJ 27.5 AM MAIN FEATURES:
High speed: 3 clicks.
Low speed: 16 clicks.
Rebound adjustment: 7 clicks.
ITEM CODE
SBC 1979
Ohlins
OHLINS REBUILD KIT FOR TTX AIR SP...
€55,10
€63,33
OHLINS REBUILD KIT FOR TTX AIR SPRING
The ÖHLINS maintenance kit contains all the sealing rings required for TTX Air Shock maintenance.
MAIN FEATURES OF THE OHLINS REBUILD KIT FOR TTX AIR SPRING:
- 1 x O-ring 40 x 2 mm- 1 x O-ring 7.3 x 2.4 mm- 1 x O-ring 30 x 2 mm- 2 x O-ring 42 x 2 mm- 1 x O-ring, blue- 1 x support ring, 33.7 x 40 x 3 mm- 1 x support ring, 33.7 x 40 x 1.4 mm- 1 x support ring, 20 x 35.5 x 1.3 mm- 1 x square ring, 32.92 x 3.53 mm- 1 x square ring, 29.74 x 3.53 mm- 1 harness ring, 4 x 1.55 mm- 1 x oil scraper- 3 x bolts, M4 x 10 mm
ITEM CODE
19190-01
Ohlins
OHLINS SERVICE KIT HYDRAULIC PART...
€76,99
OHLINS RXF36 HYDRAULIC PART SERVICE KIT
Hydraulic part service kit for Ohlins RXF36 forks.
ITEM CODE
18881-01
Ohlins
OHLINS SPRING 18075 36/113/68 N/M...
€132,86
€147,62
OHLINS SPRING 18075 36/113/68 N/MM 388 LB/IN 57 MM
Ohlins spring of ultima generation that combines race weights with mountain durability. Cutting-edge heat treatments and advanced materials allow the spring coils to be stressed without damaging them. The spring is therefore even lighter and more durable than prima.
ITEM CODE
18075-07
Ohlins
OHLINS SPARE KIT FOR RXF36 FORK
€55,79
OHLINS SPARE PARTS KIT FOR RXF36 FORK
Spare parts kit for Ohlins RFX36 fork.
INCLUDES:
4 damper bumpers
2x foam rings
2x wiper seals
1x O-ring (as SAG indicator)
ITEM CODE
18880-07
Ohlins
OHLINS SPRING 18077 36/72 411 67M...
€132,86
€147,62
OHLINS SPRING 36/72 (411 67MM) 18077 FOR SPECIALIZED TURBO KENEVO
Ohlins 18077 spring for Ohlins TTX shock absorber for Specialized Turbo Kenevo. Replaces the 18074 spring. The Ohlins spring for TTX shock absorber, compared to the previous one, is lighter. 441 pounds and maximum rider weight supported 60-65 kg.
ITEM CODE
18077-08
Ohlins
OHLINS SPRING 18075 36/88 502 LB ...
€118,10
€147,62
OHLINS SPRING 18075 36/88 502 LB 67 MM
18077 Ohlins spring for Ohlins TTX shock absorber for Specialized Turbo Kenevo. Replaces the 18074 spring. 502 pounds and rider weight from 80 to 85 kg.
ITEM CODE
18077-12
Ohlins
OHLINS SPRING 18075 36/113/112 N/...
€131,38
€147,62
OHLINS SPRING 18075 36/113/112 N/MM 640 LB/IN 57 MM
The coil springs for the Öhlins MTB TTX22M shocks have a race-ready weight and big-mountain durability. The careful selection of materials and advanced production technology, which includes a multi-fasi surface treatment process as well as heat treatments and cutting-edge wire materials, allow the wire to be stressed more heavily without causing damage to the spring and therefore to design lighter springs.Spring designed for hydraulic shocks:
MTB 1496
MTB 1497
MTB 1498
MTB 1696
MTB 1697
MTB 1698
MTBM 1892
MTBM 1893
MTBM 1972
MTBM 1973
MTBM 1975
TECHNICAL SPECIFICATIONS:
Weight: 650 - 850 g.
Diameter: 36 mm (1.42").
Stroke: 57 mm (2.25").
Material: steel, powder-coated.
ITEM CODE
18075-17
Ohlins
OHLINS 18075 SPRING FOR TTX 36/11...
€118,10
€147,62
OHLINS SPRING 18075 FOR TTX 36/113 SHOCK 92 NM 525LB/IN 57MM
Ohlins springs for TTX 22M shock. Lighter than previous versions.
ITEM CODE
18075-13
Ohlins
OHLINS SPRING 36/96 N/MM 548LB FO...
€115,29
€128,10
ÖHLINS SPRING 36/96 N/MM 548LB FOR SPECIALIZED TURBO KENEVO
Lightweight spring for Öhlins MTB TTX 22 M shock and universal TTX 22 M, available in 4 N/mm steps (the 457 lb weighs 290 g, almost like a titanium spring) and have a maximum tolerance of 1.5%.The lightweight springs of the 18074-05 to -15 series are designed for the universal TTX 22 M hydraulic shock with item no. MTB 1691 and MTBM 1895.
ÖHLINS SPRING 36/96 N/MM 548LB FOR SPECIALIZED TURBO KENEVO MAIN FEATURES:
Maximum deflection (allowable deflection): 63 mm
Indicative table to choose the correct spring for your Specialized Turbo Kenevo:
Code pounds Rider weight
18074-08 411 from 60 to 65 kg
18074-09 434 from 65 to 70 kg
18074-10 457 from 70 to 75 kg
18074-11 480 from 75 to 80 kg
18074-12 502 from 80 to 85 kg
18074-13 525 from 85 to 90 kg
18074-14 548 from 90 to 95 kg
18074-15 571 from 95 to 100 kg
18074-16 605 >100 kg
ITEM CODE 18074-14
Ohlins
OHLINS SPRING 18077 36/80 457 67M...
€132,86
€147,62
OHLINS 36/80 (457 67MM) SPRING FOR SPECIALIZED TURBO KENEVO
Spring for Ohlins TTX shock absorber for Specialized Turbo Kenevo. Replaces spring 18074. Compatible with Turbo Kenevo from 2018 to 2020. 480 lbs and maximum supported rider weight 70-75 kg.
ITEM CODE
18077-10
Ohlins
OHLINS SPRING 18075 36 113 106 N ...
€147,62
OHLINS SPRING 36/113/106 N/MM 605 LB/IN 57 MM
Spring of ultima generation that combines race weights and mountain resistance. State-of-the-art heat treatments and advanced materials allow the spring coils to be stressed without damaging them, which means that they are even stronger and lighter than prima.
ITEM CODE
18075-16
Ohlins
OHLINS SPRING 18074 36/106 N/MM 6...
€108,90
€121,00
ÖHLINS SPRING 36/106 N/MM 605LB FOR Specialized Turbo Kenevo
Light spring for Öhlins MTB TTX 22 M and universal TTX 22 M shock absorbers available in 4 N / mm steps (the 457 lb weighs 290 g, quasi like a titanium spring) and have a maximum tolerance of 1.5%.The light springs of the 18074-05 bis -15 series are designed for the universal hydraulic TTX 22 M shock absorber with item no. MTB 1691 and MTBM 1895.
ÖHLINS SPRING 36/106 N/MM 605LB FOR Specialized Turbo Kenevo MAIN FEATURES:
Weight: between 241 and 360 %u200B%u200Bg.
Diameter: 36 mm.
Length: 111-120 mm.
Spring rate: 80 N / mm.
Stroke: 63.5 mm.
Material: steel, powder-coated.
Maximum deflection (allowable deflection): 63 mm.
Color: yellow.
Indicative table to choose the correct spring for your Specialized Turbo Kenevo:
Code pounds Rider weight
18074-08 411 from 60 to 65 kg
18074-09 434 from 65 to 70 kg
18074-10 457 from 70 to 75 kg
18074-11 480 from 75 to 80 kg
18074-12 502 from 80 to 85 kg
18074-13 525 from 85 to 90 kg
18074-14 548 from 90 to 95 kg
18074-15 571 from 95 to 100 kg
18074-16 605 >100 kg
COD. ART. 18074-16
Ohlins
OHLINS RFX36 RFX38 M2 FORK AXLE
€75,49
OHLINS RFX36 RFX38 M2 FORK AXLE
Ohlins thru axle for RXF 36 and RXF 38 M.2 fork (non original equipment). Length: 159 mm.
ITEM CODE
18870-01
Ohlins
OHLINS SPARE PARTS KIT FOR DH38 FORK
€53,67
€60,30
OHLINS SPARE KIT FOR DH38 FORK
Service kit for Ohlins DH38 forks.
ITEM CODE
19237-01
Ohlins
OHLINS SKF SEAL AND DUST WIPER KI...
€36,00
OHLINS SKF SEALS AND DUST WIPERS KIT FOR 38MM FORK
Riding experience and durability are two decisive factors in the design of bicycle fork seals. For off-road applications in particular, such as those in the xc, enduro or downhill categories, the requirements for the seals are very demanding. These seals are developed to ensure low friction during operation and maximum contact with the ground for an optimal riding feel.
SKF seal kits for mountain bike forks are made with the same self-lubricating compound developed to achieve superior sealing performance in motorcycle applications.
OHLINS SKF SEALS AND DUST WIPERS KIT FOR 38MM FORK MAIN FEATURES:
Significantly optimized riding comfort.
Extended service life and improved performance.
Better protection against water and contaminants.
Reduced wear and air suction.
Compatibility with a wide gamma of fork oli for original equipment and aftermarket.
Capacità to withstand UV rays.
NBR elastomer specifically formulated for reduced and consistent friction.
Double-lip scraper for heavily contaminated environments.
2x SKF sealing gaskets.
2x pre-impregnated foam rings.
Weight (approx.): 34g.
ITEM CODE
MTB38OHL
Ohlins
OHLINS AM RXF38 M2 AIR TTX18 29 4...
€1.592,10
€1.769,00
OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK
The proven TTX 18 shock from the DH38 Race fork has been revised to offer even more traction and control on Enduro trails. The TTX 18 cartridge kit includes an 18 mm piston optimized for trail riding to improve small bump sensitivity.The adjustment system is specific for Trail and Enduro racing and provides 15 clicks for low-speed compression and low-speed rebound. For high-speed compression there are 3 clicks plus a climb mode setting. Three-chamber dual-piston air spring system, which allows full adjustment of the air springs from the initial movement all the way to the end of the travel.The fork can accommodate 29×2.8 tires.
OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK MAIN FEATURES:
TTX technology.
Travel: 170 mm.
Diameter: 38 mm.
Offset: 44 mm.
Compatibility with 29x2.8 tires.
Race-proven adjustment system.
General improvements to reduce friction.
ITEM CODE
FGMTB 3817 2210
Ohlins
OHLINS SPRING 18075 36/130 N/MM 7...
€147,62
OHLINS SPRING 18075 36/130 N/MM 741 LB/IN 57 MM
New generation Ohlins spring that combines race weights with the resistance of the big mountains. Cutting-edge heat treatments and advanced materials allow the spring coils to be stressed without damaging them: the springs can therefore be even stronger and lighter than before.
ITEM CODE
18075-20
Ohlins
OHLINS SPRING 36/113/80 457LB 57M...
€131,38
€147,62
OHLINS SPRING 36/113/80 FOR TTX 18075 457LB 57MM FOR TTX 18075
Ohlins springs for TTX 22M shock absorber, lighter than the previous version.
ITEM CODE
18075-10
Ohlins
OHLINS AM RFX34 M2 AIR OTX18 29 4...
€1.358,23
€1.509,14
OHLINS AM RFX34 M2 AIR OTX18 29 44-130 FORK
Medium-travel fork perfect for trail ride and downcountry, and to tackle even the most challenging tracks with total peace of mind.
The fork can be easily adjusted: 15 clicks for low-speed compression and rebound adjustment. Three settings for high-speed compression. Optimal balance between traction, weight control (1698 g) and stiffness (it can also be mounted on e-bikes).
The new fork replaces the original RXF34 and offers 130 mm of travel optimized for lightweight 29er trail bikes. With a weight of only 1698 g, the fork vanta a brand-new air spring and shock, adapted to the needs of the emerging riding style, while maintaining all the tratti that distinguish Öhlins’ high-performance, race-proven suspension, like its long-travel single-crown cousins RXF36 m.2 and RXF38 m.2.
The OTX18 damper is specifically designed for downcountry and was born from the great success of the TTX18 featured in Öhlins downhill and trail forks. It shares several key components with its bigger brother TTX18, but weighs 27% less and is optimized for faster, smoother trail riding, finding an optimal balance between traction, control, weight and stiffness. Like all Öhlins dampers, the OTX18 offers impressive adjustability for fine tuning, with fifteen clicks for low-speed compression and rebound adjustment and three for high-speed compression adjustment.
The new damper is paired with a robust yet lightweight air spring, equipped with a positive chamber and a self-adjusting negative chamber. The positive chamber allows you to adjust the spring curve according to your needs using the Öhlins volume spacer system. The negative chamber, on the other hand, is designed for fast trail riding and provides a soft initial feel and superb small-bump sensitivity. The surface and seals of the spring also minimize friction and breakaway force to improve the fork’s smooth feel.
The fork chassis is very stiff and offers precise steering, and all this has been made possible thanks to a closed outer-tube design to increase stiffness, impact resistance and the volume of the lower legs. The increased air volume in the lower part of the fork enhances the effect of the air spring on overall performance. The RXF34 m.2 also benefits from the same race-proven floating axle design found on the RXF36 m.2 and RXF38 m.2, which reduces friction and further increases stiffness.
OHLINS AM RFX34 M2 AIR OTX18 29 44-130 FORK KEY FEATURES:
- OTX18 damper optimized for trail.
- 34 mm stanchions.
- 29" wheels.
- 44 mm offset.
- 130 mm travel.
- Floating axle design to minimize friction.
- eMTB approved.
- Brake rotor sizes: 160 mm, max 203 mm.
- Maximum tire size: 29 x 2.6.
- Weight 1698 g without spacers.
- Axle to corona 541 mm @ 130 mm travel.
ITEM CODE
FGMTB 3413 2230
Ohlins
OHLINS SPRING 18077 FOR specializ...
€132,86
€147,62
OHLINS SPRING 18077 FOR SPECIALIZED 36/118 N/MM 674 LB/IN 67MM
Ohlins 18077 spring for Ohlins TTX shock for Specialized Turbo Kenevo. The 18077 spring replaces the 18074 spring. Pounds 674. Maximum supported weight: 110 kg.
ITEM CODE
18077-18
Ohlins
OHLINS SPRING 36/113/84 (480 LB/I...
€132,86
€147,62
OHLINS SPRING 36/113/84 (480 LB/IN) 57MM
Ohlins springs for TTX 22M shock absorber, lighter than the previous version.
ITEM CODE
18075-11
Ohlins
OHLINS DH TTX22M SHOCK ABSORBER 8...
€839,97
€933,30
OHLINS DH TTX22M 8.52X2.5 INT 216 mm SHOCK
The OHLINS DH TTX22M 8.52X2.5 INT 216 mm has been specifically designed to tackle the most demanding courses of the Downhill World Cup. It uses the exclusive Öhlins TTX twin-tube technology that keeps compression separate from rebound: it improves ride quality by increasing stability, vibration absorption, and excellent traction at any point on the course.Adjustable in compression and in rebound at alte and low speeds, it also features spherical bearings that allow the suspension to move while the bicycle is subjected to lateral torsion.The spring non included.
OHLINS DH TTX22M 8.52X2.5 INT 216 mm KEY FEATURES:
Twin-Tube (TTX) technology.
Weight between 425 and 460 g (without spring).
Length 216 mm (8.5 in).
Stroke: 63 mm (2.5 in)
Aluminum design, duro anodized.
Fully serviceable and rebuildable.
ADJUSTMENTS
3 clicks of high-speed compression damping.
16 clicks of low-speed compression damping.
7 clicks for dell'extension damping.
ITEM CODE
MTB 1491