MTB wheels

Introducing the brand-new Reserve 30|DH: a wheelset engineered to withstand the most violent impacts, the most demanding terrains, and the toughest downhill tracks in the world. Developed with direct input from the Santa Cruz Syndicate and tested in a wide range of competitions—from Red Bull Hardline events to DH World Cup races—the 30|DH delivers the strength, reliability, and riding precision needed to push limits. Featuring a redesigned carbon structure for enhanced impact resistance and a refined profile for improved compliance, these wheels are built to handle any situation, from racing to bike park laps. If you’re looking for uncompromising durability without sacrificing speed, the Reserve 30|DH is ready for action. Designed for – Downhill and racing Hub spacing – DH: 20x110 front – 12x157 rear Spoke count – 28 front – 32 rear Wheelset weight – 29” DT 350 – 2036 g Rim weight – 29” front 585 g – rear 645 g – 27.5" front 540 g Internal width – 30 mm External width – 38 mm Rim depth – 20 mm Asymmetric offset – 3.6 mm ERD – 29” 599 mm – 27.5” 558 mm Recommended tire size – from 2.4” to 2.6” E-bike approved – Yes SANTA CRUZ RESERVE HD 30 MX DT 350 6 BOLT 110X157 XD KEY FEATURES: Rim width – 30 mm Rim height – 21 mm Hub – DT 350 Front / Rear – Set Brake type – 6-bolt Freehub – XD Wheel size – MX Material – Carbon

HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE The HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE combines 30 years of experience with the needs of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was reducing drag in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system with new springs.Another important update to the rear hubs is the increase in engagement points (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any one time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in practical terms you get a fast feel on the trail while keeping crank movement at an acceptable level without compromising hub free movement or its reliability.The hub is sold with a freehub body specifically designed for e-bikes: all six pawls engage simultaneously, which both reduces lag and increases load capacity and durability. The freehub is made entirely of stainless steel for better stability and wear resistance.The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows for larger bearings to be mounted in a better arrangement to fit the latest freehub standards while at the same time increasing load capacity. HOPE REAR HUB PRO 5 148 MM BOOST 32 HOLES E-BIKE MAIN FEATURES: Hub shell machined from forged 2014 T6 Aluminium. 6-bolt disc brake system. Stainless steel sealed cartridge bearings. Labyrinth seal. NB: in the order notes indicate which freehub body you want to mount between shimano microspline, shimano hg steel and sram xd.

Specialzied S205900003 Front hub axle bmb-00331OF0 31mm 31 mm front hub axle compatible with Specialized, Levo 29, SJ comp and Status 2021 FEATURES: 31 mm front hub axle, compatible with: 2021 DEMO EXPERT 2021 LEVO 29 2021 LEVO COMP CARBON 29 2021 SJ ALLOY 2021 SJ COMP ALLOY 2021 STATUS 140 BASE 2021 STATUS 160 BASE

DEITY PRESTA VALVE CAPS The Deity Presta valve caps are a must for all cyclists. Made of lightweight aluminum, they are strong and durable. Equipped with a rubber gasket for an airtight seal, they are easy to install and offer an excellent choice for all cyclists. They are an indispensable accessory for keeping your bike in perfect condition. DEITY PRESTA VALVE CAPS MAIN FEATURES: Made of lightweight aluminum for strength and durability Rubber gasket for an airtight seal Easy to install and suitable for all cyclists

HOPE FRONT HUB PRO 5 110 MM 28 HOLES The HOPE FRONT HUB PRO 5 110 MM 28 HOLES combines 30 years of experience with the needs of current and future cycling technologies. One of the main design goals of the Pro 5 hub was the reduction of aerodynamic resistance in the drive mechanism. To achieve this result, it was necessary to improve the sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system with new springs.Another important update to the rear hubs is the increase in engagement points (from 44 to 108) thanks to a 6-offset pawl hub design, in which 3 pawls are engaged at any one time. In this way it is possible to achieve the right balance between pick-up speed, load capacity, strength and durability, and in real terms you get a feeling of speed on the trail while keeping crank movement at an acceptable level without compromising hub free movement or its reliability. The outer shell has a new profile to increase stiffness without increasing weight and the new axle design allows the use of larger bearings in a better arrangement to suit the latest freehub standards, while at the same time increasing load capacity. HOPE FRONT HUB PRO 5 15X110 MM 28 HOLES MAIN FEATURES: Stainless steel sealed cartridge bearings. Hub shell machined from forged aluminum billet. Standard 6-bolt disc mount. Larger spoke flange to allow the construction of stiffer wheels. Unbeatable reliability. Torq end cap. The hub flanges are moved 5 MM outwards compared to the standard 100 m front hub to increase wheel stiffness. 28 holes. Machined from 2014 T6 forged aluminum billet. Weight (approximate): 188 g. NB: in the order notes, indicate whether you want to purchase the 15 or 20 MM version.

DT SWISS RATCHET EXP MTB 12x142/148 MM SRAM XD FREEWHEEL BODY The DT SWISS Ratchet EXP MTB 12x142/148 mm Sram XD freewheel body allows you to fit the SRAM XD cassette on DT SWISS Ratchet EXP type hubs. DT SWISS RATCHET EXP MTB 12x142/148 MM SRAM XD FREEWHEEL BODY MAIN FEATURES: Material: aluminum. Sram XD cassette. 10-12 speeds. ITEM CODE HWYABL00S5372S

S165500006 Roval Traverse 38 27.5'' tlr boost rear xd wheel Rear Roval Traverse 38 27.5'' wheel, 38 mm internal rim width, 6-bolt disc mount. Wheel primo assembly for turbo levo 2018 S165500006 Roval Traverse 38 27.5'' tlr boost rear xd wheelmain features: 27.5'' Boost 38 mm internal rim width 6-bolt disc mount XD 12-speed freehub body Wheel primo assembly turbo levo 2018

HOPE FRONT HUB PRO 5 110 MM 32 HOLES The HOPE FRONT HUB PRO 5 110 MM 32 HOLES combines 30 years of experience with the demands of current and future cycling technologies. One of the main objectives in designing the Pro 5 hub was the reduction of rolling resistance in the drive mechanism. To achieve this result it was necessary to improve sealing with a new zero-resistance labyrinth seal and an improved ratchet and pawl system, with new springs.Another important upgrade of the rear mozzi consists in increasing the points of engagement (from 44 to 108) thanks to a 6-offset-pawl hub design, in which 3 pawls are engaged at any time. In this way it is possible to achieve the right balance between pickup speed, load capacity, strength and durability, and in real terms you get a feeling of speed on the trail while keeping crank movement at an acceptable level without compromising the hub’s freedom of movement or its reliability. The outer part of the shell has a new profile to increase stiffness without increasing weight, and the new axle design allows the installation of larger bearings in a better arrangement to fit the latest freehub standards, while at the same time increasing load capacity. HOPE FRONT HUB PRO 5 110 MM 32 HOLES MAIN FEATURES: Sealed stainless steel cartridge bearings. Hub shell machined from forged solid aluminum. Standard 6-bolt disc mounting. Larger spoke flange to allow the building of stiffer wheels. Unbeatable reliability. Torq end cap. The hub flanges are moved 5 mm further out compared to the standard 100 m front hub to increase wheel stiffness. 32 holes. Machined from forged 2014 T6 aluminum. Weight (approximate): 188 g. NB: specify in the order notes whether 15 or 20 mm

WTB TCS 45MMX11M TUBELESS TAPE COMPATIBLE WITH I40 RIMS The TCS tubeless tape is designed to offer maximum reliability and performance. With a width of 26 mm and a length of 11 m, this tape is compatible with i21 rims. Ideal for those looking for an efficient and durable solution for tubeless conversion. WTB TCS 45MMX11M TUBELESS TAPE COMPATIBLE WITH I40 RIMS MAIN FEATURES: TCS technology (Tubeless Compatible System) WTB recommends using a tubeless tape 5 mm wider than the internal width of the rim

SPECIALIZED S140200001 rear axle camber/sj fsr/enduro 142x12 qr Rear axle Camber, Stumpjumper fsr, Enduro 142mm qr FEATURES: Rear axle Compatible with Camber, Stumpjumper FSR and Enduro Length 142 mm ITEM CODE: S140200001 Barcode: 719676675008

World Cup speed meets trail capability: as fast as racing, as tough as the trail. With the new Control SL VI 350, XC speed merges with unprecedented off-road durability. Weighing only 788g, this rear wheel allows you to dominate climbs with extreme agility. The asymmetric carbon layup, optimized for superior traction, has been specifically reinforced to withstand the hardest impacts of Downcountry trails. Thanks to the mix of DT Swiss Revolution spokes and the reliable DT Swiss 350 hub with Star Ratchet system, the Control SL VI 350 offers quick engagement and pinpoint control for top-tier performance. SPECIALIZED ROVAL CONTROL SL VI 350 REAR WHEEL MAIN FEATURES: Rim Optimization: Asymmetric carbon layup tuned to maximize traction and increase impact resistance on technical descents. DT Swiss 350 Hub: Proven Straight Pull technology with 36-tooth Star Ratchet freehub system and 10° engagement angle, ensuring immediate pedal response. FlatStop Protection: 4mm wide rim flange that drastically reduces the risk of pinch flats, preserving the integrity of the carbon profile. Hand-Built Construction: Each wheel is hand-assembled to ensure perfect spoke tension and superior long-term durability. Downcountry Versatility: Hookless design and 29mm internal width provide ideal support for modern high-volume tires. TECHNICAL SPECIFICATIONS Parameter Specifications Rim Roval Control SL VI Asymmetric Carbon 29" (WC033-3) Rim Dimensions Internal width: 29 mm | External: 37 mm | Height: 25 mm Structure Carbon clincher, Tubeless Ready, Hookless Rear Hub DT Swiss 350 Straight Pull, 12x148mm Boost Freehub DT Swiss Ratchet 36T (10° angle), SRAM XD compatible Spokes and Nipples DT Swiss Revolution Straight Pull / Pro Lock Hexagonal Alloy Weight 788 g (including tape and valve) ADDITIONAL DETAILS Application: XC Racing, Downcountry, Fast Trail. Tire Compatibility: Recommended width from 1.9" to 2.6". Maximum Pressure: 40 psi (Tubeless or with inner tube). Bearings: DT Swiss Stainless Steel (DS/NDS: 6902). E-Bike Ready: Certified for SL systems or motors with max power 350W. Weight Limit: 125 kg (rider + bike). Scope of delivery: Rear wheel, 4 spare spokes/nipples, 31mm OD End Caps, rim tape, and 40mm Presta valve.

The SRAM accessory ACC CONV CAPS HUB MTH 716 F 15 is designed for those who want to easily and securely adapt their SRAM MTH 716 front hub to a 15 mm thru axle. A small component that makes a big difference: it allows you to keep your favorite hub even when changing forks or axle standards, without compromising stiffness, smoothness, and reliability. Ideal for upgrades, replacements, or for those who want to always have their bike ready for any configuration, these SRAM-branded end caps ensure precise compatibility and immediate installation, perfect for those who ride hard on trail, all-mountain, and XC. Main features of SRAM FRONT HUB CONVERSION CAPS 15X100 - MTH 716: Pair of conversion end caps for SRAM MTH 716 front hub Allows use with 15 mm front thru axle Ideal solution for upgrading the fork while keeping the existing hub Specific compatibility with SRAM standards for optimal alignment and operation Simple and quick installation, no complex interventions needed Robust construction to withstand intensive MTB use Perfect for trail, all-mountain, and cross country Original SRAM accessory for maximum reliability and durability

The SRAM ROCK SHOX MAXLE ULTIMATE 15X100MM THREAD 1.50MM THRU AXLE is the thru axle designed for those who want a light, practical, and secure wheel fastening system. Ideal for use on RockShox forks, it combines stiffness and steering precision with extremely quick tool-free assembly and disassembly. Perfect for those who alternate between trail, all-mountain, or enduro rides and want a reliable system that keeps the wheel perfectly in place, even on the most demanding terrain. SRAM ROCK SHOX MAXLE ULTIMATE 15X100MM THREAD 1.50MM THRU AXLE MAIN FEATURES: Lightweight thru axle for RockShox forks Maxle Lite design to reduce weight without compromising stiffness Tool-free quick release system for fast assembly and disassembly Improves steering precision and front-end stability Compatible with selected RockShox forks (check standard and specific length) Ideal for trail, all-mountain, and enduro use TECHNICAL SPECIFICATIONS: 7075 aluminum construction Standard: 15 x 100mm (15mm thru axle with 100mm installation width) Compatibility: RockShox Pike, Lyrik 2016, Yari, and RS-1 Total length: 148 mm Thread length: 10 mm Thread pitch: M15 x 1.50 Weight: 75g

World Cup speed meets trail capability: as fast as in racing, as tough as on the trail.With the new Control SL VI 350, XC speed meets off-road durability. Weighing only 690g, this wheel dominates climbs with ease thanks to an optimized carbon layup specifically tuned for increased traction. Equipped with DT Swiss Revolution spokes and the durable DT Swiss 350 Straight Pull hub, it offers the optimal mix of speed, control, and durability for top performance in all conditions. SPECIALIZED CONTROL SL VI 350 FRONT WHEEL MAIN FEATURES: Rim Optimization: Asymmetric carbon layup specifically designed to ensure greater traction and responsiveness in technical sections. DT Swiss 350 Hub: Proven and ultra-durable Straight Pull front hub, with 6-bolt disc mount and maximum smoothness. FlatStop Protection: 4mm wide rim flange that drastically reduces the risk of pinch flats, increasing the longevity of the profile. Hand-Built Construction: Each wheel is built by hand to ensure perfect tensioning and superior long-term durability. E-Bike Ready: Designed to withstand the stresses of SL e-bike systems or power outputs up to 350W. TECHNICAL SPECIFICATIONS Component Technical Details Rim Roval Control SL V Asymmetric Carbon 29", Hookless, Tubeless Ready Rim Width Internal: 29 mm | External: 37 mm | Height: 25 mm Hub DT Swiss 350 Straight Pull, 15x110mm Boost, 28 holes Spokes DT Swiss Revolution Straight Pull, 2-cross Bearings DT Swiss Stainless Steel (6902) Weight 690 g (with tape and valve) Weight Limit 125 kg (total system) ADDITIONAL DETAILS Field of Use: XC-Racing, Downcountry. Tire Compatibility: Recommended width from 1.9" to 2.6". Maximum Pressure: 40 psi (Tubeless or with inner tube). Axle: 15x110mm Boost (19mm and 31mm End Caps included). Included in the box: Front wheel, 4 spare spokes and nipples, rim tape, 40mm Presta valve.

Roval Terra CL Front & Rear. The Specialized Roval Terra CL Front & Rear wheels are designed for those who want to explore beyond asphalt without sacrificing lightness and precise handling. Directly derived from the renowned Terra CLX, they share the same extremely light and robust carbon fiber rim, with a 32 mm profile and a 25 mm internal channel: a modern platform ideal for fast gravel, light bikepacking, and long endurance rides. Tubeless compatibility and a wide range of tires from 28 to 47 mm let you switch instantly from pure asphalt to the most demanding gravel roads, with grip, comfort, and control always at the top. DT Swiss 350 hubs with straight-pull DT Swiss Competition spokes guarantee reliability, easy spare part availability, and worry-free maintenance. The result is a wheelset almost as light as the CLX, with performance very close to the top tier, but at a significantly more accessible price: the perfect companion to turn your bike into a true adventure machine. Roval Terra CL Front & Rear main features: 700c Terra CLX carbon fiber rim for disc brakes, lightweight and durable, directly derived from the Terra CLX top-of-the-line series 32 mm rim profile for the right balance between aerodynamics, crosswind stability, and comfort 25 mm internal width (30 mm external) ideal for modern wide gravel and road tires, 28 to 47 mm Tubeless ready compatibility for low-pressure setups, increased grip, and reduced flat risk 577 mm ERD rim diameter for optimized geometry and balanced spoke tension DT Swiss 350 Straight-pull Center Lock hubs with Star Ratchet 36t (10°) mechanism for quick and reliable engagement Standard thru-axles: front 100x12 mm, rear 142x12 mm Shimano Road 11-speed freehub body, replaceable for future compatibility DT Swiss sealed cartridge steel bearings for smoothness and longevity 24 straight DT Swiss Competition Race spokes: front second cross (1:1) with lengths R 287 mm / L 286 mm, rear second cross (1:1) with lengths R 284 mm / L 287 mm DT Swiss Prolock aluminum 2.0x14 mm hex nipples for stable and durable tensioning Tire compatibility: 28 mm to 47 mm for use from fast road to demanding gravel Recommended max pressures: 28–32c up to 80 psi; 33–36c up to 65 psi; 37–47c up to 60 psi Pair weight 1408 g (front 654 g, rear 754 g), including tape and tubeless valve Hand assembled for guaranteed build quality, optimal centering, and spoke tension Maximum system load (bike + rider + luggage) 125 kg Includes pre-installed tubeless tape, tubeless valves, spoke and nipple spare kits TECHNICAL SPECIFICATIONS:MODEL: Roval Terra CL Front & Rear.MODEL YEAR: 2024RIM MATERIAL: Carbon fiberRIM PROFILE HEIGHT: 32 mmEXTERNAL RIM WIDTH: 30 mmINTERNAL RIM WIDTH: 25 mmTUBELESS COMPATIBILITY: Tubeless ReadyCOMPATIBLE TIRE WIDTHS: 28 - 47 mmHUB: DT Swiss 350 Straight-pull Center LockHUB RATCHET SYSTEM: Star Ratchet 36t (10°)HUB AXLE: 100x12mm (front), 142x12mm (rear)FREEHUB COMPATIBILITY: Shimano Road 11-speed (replaceable freehub)BEARINGS: DT Swiss sealed cartridge steel bearingsNUMBER OF SPOKES: 24 1SPOKE TYPE: DT Swiss Competition Race straightNIPPLES: DT Swiss Prolock Al 2.0x14mm hexWHEELSET WEIGHT: 1408 gFRONT WHEEL WEIGHT: 654 gREAR WHEEL WEIGHT: 754 gMAXIMUM LOAD: 125 kgBRAKE TYPE: Center Lock Disc BrakeWHEEL DIAMETER: 700cASSEMBLY: Hand assembledINCLUDED ACCESSORIES: Includes tape and tubeless valve, spoke and nipple kit

S175900005The Specialized S175900005 component is designed for those who demand absolute reliability from their bike, both on road and off-road. Engineered to perfectly integrate with the American brand's standards, this spare part is ideal to restore your bike to its original performance or to complete an upgrade with dedicated components. Whether you are preparing the bike for a granfondo, a mountain ride, or simply to ride every day with maximum safety, S175900005 offers you the quality and build precision typical of Specialized, guaranteeing long-lasting durability and certified compatibility.Main features of S175900005:Original Specialized spare part, ideal for maintenance and upgradesDesigned to ensure compatibility with selected models of the brandHigh-quality materials for reliability and durability over timePerfect solution to maintain bike performance as per factory specificationsRecommended for cyclists looking for certified and safe components 2020 S-Works Epic Shimano XTR 2020 S-Works Epic Hardtail XTR 2020 S-Works Epic Hardtail Ultralight 2020 S-Works Epic Hardtail AXS 2020 S-Works Epic AXS 2019 Women's S-Works Epic 2019 Men's S-Works Epic 2018 Women's S-Works Epic 2018 Men's S-Works Epic XX1 Eagle 2018 Men's S-Works Epic XTR Di2 2017 S-Works Epic FSR World Cup 2016 S-Works CruX 2016 Diverge Pro CEN 2016 Diverge Pro 2016 CruX Pro Race 2015 S-Works Stumpjumper FSR 29 2015 S-Works Stumpjumper 29 World Cup 2015 S-Works Fate Carbon 29 2015 S-Works Epic 29 World Cup 2015 S-Works Camber 29 2014 S-Works Stumpjumper HT World Cup 2014 S-Works Stumpjumper 29 2014 S-Works Fate Carbon 29 2014 S-Works Epic Burry Stander Edition 2014 S-Works Epic 29 World Cup 2014 S-Works Epic 29

The Shimano MICROSPLINE 12-speed freehub body is the essential component to upgrade or keep your FH-MT410-B or FH-MT510-B rear hub performing at its best. Designed to accommodate 12-speed cassettes with the Microspline standard, it ensures fast engagement, smooth power transmission, and perfect compatibility with the latest-generation Shimano groupsets. Whether you are upgrading your MTB to 12 speeds or replacing a worn freehub body, this freewheel body allows you to take full advantage of Shimano’s renowned reliability and precision, keeping your hub ready for long rides, technical trails, and intensive use. SHIMANO MICROSPLINE 12-SPEED FREEHUB BODY FOR REAR HUB – KEY FEATURES: Compatible with Shimano FH-MT410-B and FH-MT510-B rear hubs MICROSPLINE standard specifically designed for Shimano 12-speed cassettes Precise and smooth engagement for fluid and responsive shifting Ideal solution for upgrading to Shimano 12-speed drivetrains Typical Shimano reliability and long-lasting durability Perfect for MTB use, trail riding, and all-mountain TECHNICAL SPECIFICATIONS: FREEHUB BODY TYPE: MICROSPLINE 12-speed HUB COMPATIBILITY: FH-MT410-B, FH-MT510-B CATEGORY: WOP spare parts, Wheel and hub spare parts, Wheel components

The wheels are without doubt the most important component of your mountain bike, which is why we have developed a completely new line of aluminum Reserve wheels for trail, enduro and e-bikes. The aluminum Reserve wheels have been designed and developed to offer a product that rivals the performance of our much-loved carbon wheels, but at a much more accessible price. And with our industry-leading lifetime garanzia a vita, you can be sure you will enjoy these wheels for many years to come. RESERVE 30 HD AL DT350 90T XD 6-BOLT MX WHEELS MAIN FEATURES: Fillmore Standard valves: our patented Fillmore valve represents a revolutionary step forward in technology, with a high-flow design that makes tubeless installation easier and eliminates the traditional valve core, delicate and prone to clogging. Tested and approved: after over a year of road and laboratory test, the 30|HD AL wheels are designed to withstand any stress. Like all Reserve wheels, they are covered by a garanzia a vita. Asymmetric design: asymmetric rims, like those of the 30|HD AL, make the wheels stiffer, stronger and more reliable, improving bracing angles and equalizing spoke tension between the drive side and the non-drive side. Wheelset weight (MX): DT 350 - 1960 g Designed for: trail, all mountain, enduro, e-bike Internal width: 30 mm Depth: 22 mm Rim weight: 29 580 g, 27.5 540 g Recommended tire sizes: from 2.2 to 2.6 Number of spokes: 32 Spokes: J-bend with aluminum nipples Brake rotor: 6-bolt

SPECIALIZED DT SWISS SPOKE S174600023 DT Swiss Competition straight-pull steel spoke with customized T-head. Brand: DT Swiss Model: Competition Type: straight-pull T-head Length: 284 mm Spoke body: round double-butted 2.0 x 1.6 mm Material: Steel CODE S174600023

WTB ST Disc TCS Rim - 27.5 The Rim ST Disc TCS - 27.5", i23, 28 holes from the renowned marca Wtb is designed to offer excellent performance and durability on demanding terrain. With the ST i23 model, TCS 2.0, 28 holes and 27.5-inch size, this rim is the ideal choice for tackling mountain bike adventures with confidence and safety. Main features: ST i23 rim with TCS 2.0 technology for increased grip and control on technical terrain 28 holes for a strong and reliable structure 27.5-inch size, ideal for tackling off-road routes with agility

HOPE PRO2 AND PRO2 EVO FRONT HUB CONVERSION KIT 10MM THRU AXLE The Hope conversion kits convert your Hope mozzi to the corresponding mounting standards, thus allowing versatile use of the mozzi.Unlike the Pro 2 hub, on the Pro 2 Evo rear hub it is no longer necessary to change the axle, so in this case as well it is only necessary to work with the end caps. HOPE PRO2 AND PRO2 EVO FRONT HUB CONVERSION KIT 10MM THRU AXLE KEY FEATURES: Convertible to: front 9 x 100 mm ThruBolt thru axle base model: front 9 x 100 mm quick release, 12 x 100 mm thru axle, 15 x 100 mm thru axle, 20 x 110 mm thru axle Compatibility: Pro 2 / Pro 2 Evo ITEM CODE HUB443

DT SWISS EX 1700 SPLINE 29 REAR WHEEL - 30MM IS 12X148 MM SRAM Aluminum wheel perfect for tackling the most difficult Enduro tracks in the world. The wheel features a 36T ratchet hub and a welded aluminum rim that is 30 mm wide. The lightweight makes climbing easier. Double-butted Competition straightpull spokes. KEY FEATURES OF DT SWISS EX 1700 SPLINE 29 REAR WHEEL - 30MM IS 12X148 MM SRAM: 350 hub with 36 SL ratchet system. Hooked/Crotchet tubeless TC aluminum rim. Internal width: 30 mm. External width: 35 mm. Spokes: DT competition® straightpull. Tire interface: Hooked/Crotchet tubeless TC. Presta valve hole. Wheel diameter: 29/700c. Tape: Waterslide. Internal width: 30 mm. External width: 35 mm. Thru-axle: 12 mm. Spacing: 148 mm Boost. Compatible with IS 6-bolt disc brake. Freehub body: SRAM XD MTB (ASRAM). Freewheel: Ratchet System 36 SL. Left-side lacing: DT competition® Straightpull. Drive-side lacing: DT competition® Straightpull. Three-cross lacing. Spoke nipples: DT Prolock Squorx ProHead alu. ITEM CODE WEX1700TFDRSA11696

DT Swiss Shimano Microspline 12-speed Aluminum Light Ratchet LN with end cap DT Swiss MTB freehub body Shimano Micro Spline Light 12-speed (Ratchet LN). DT Swiss Shimano Microspline 12-speed Aluminum Light Ratchet LN with end cap KEY FEATURES: Shimano 12-speed Microspline standard Light version Compatible with Shimano Micro Spline cassettes Standard: Ratchet LN Compatible with 12x142 and 12x148mm Boost standards Aluminum construction End cap included ITEM CODE HWYABM00S3765S

SPECIALIZED S174600011 DT Aerocomp Straight Pull Spoke 2.0x2.3mm 14g 277mm DT Aerocomp spoke compatible with Roval CLX 32 rear, non-drive side. Length 277 mm FEATURES: DT Aerocomp spoke Size: 2.0x2.3 14g Length: 277 mm ITEM CODE: S174600011