Specialized
SHOES SPECIALIZED S-WORKS RECON SHOE
from €339,30
€390,00
SHOES SPECIALIZED S-WORKS RECON SHOE
The new SHOES SPECIALIZED S-WORKS RECON SHOE bring to off-road performance the benefits of road shoes. Thanks to over 100,000 foot scans drawn from RETÃœL data, a wider carbon sole has been introduced to better accommodate all shapes of the human foot. An internal I-Beam adds rigidity and strength, avoiding the need for additional reinforcements. The result is a shoe with a comfortable fit, adjustable, and sufficiently rigid to transfer all power to the pedals. The inside and outside of the shoe are built following Body Geometry criteria: thanks to 20 years of study and development, this shoe has no weak points, only high performance when pedaling. Thanks to the varying thickness, the longitudinal arch, and the metatarsal button, the foot stays in the correct position while pedaling and remains aligned with the knees and hips.
SHOES SPECIALIZED S-WORKS RECON SHOE MAIN FEATURES:
The high-density base and new spacers allow you to regulate pedal contact for maximum efficiency and a Road ride.
Body Geometry technology with varus support, longitudinal arch, and metatarsal button.
The asymmetric heel counter supports the medial side and allows material to be removed from the lateral area, enabling a lower collar.
The use of an internal I-Beam adds rigidity and strength, eliminating the need for further reinforcements and allowing the shoe to remain extremely light.
The reinforced zones on the fourth and forefoot maximize support, while the new BOA® closure improves lock, eliminating the need for a toe closure.
Available as spare parts are additional spacers of 3 mm, 6 mm, and 9 mm to compensate leg length and for cleats.
For a wider fit - the new sole is 4 mm wider than the standard width (8 mm wider than the previous S-Works Recon shoes).
Indicative weight 280g for a size 42 shoe.
SIZING TABLE
SIZES
CENTIMETERS
41
26
41.5
26.5
42
27
42.5
27.3
43
27.5
43.5
27.9
44
28.3
44.5
28.6
45
29
45.5
29.3
46
29.5
46.5
29.9
47
30.2
Specialized
SPECIALIZED S-WORKS TORCH CYCLING...
from €351,00
€390,00
SPECIALIZED S-WORKS TORCH CYCLING SHOES
The SPECIALIZED S-WORKS TORCH are modern and ultra-lightweight road cycling shoes. Thanks to Body Geometry, biomimetics, data science, and Specialized craftsmen's expertise, it has been possible to design this shoe so light that you forget you are wearing it. The BOA® cable has been positioned downward and angled to prevent the forefoot from lifting. Thanks to this evolution, the Velcro strap was eliminated and the shoe’s structure improves power transfer and eliminates unwanted pressures and pinching. The materials used for the upper follow the natural movement of the foot, offering all the necessary comfort, and the reinforced zones keep the foot snug for a crisp power output and optimal efficiency.Inside the sole there is an internal reinforcement for greater rigidity and durability: the result is a 20-gram weight reduction, greater efficiency, and immediate power transfer.The part of the shoe that accommodates the Achilles tendon, compared to previous models, is asymmetric, offers more space, and maintains an excellent connection.
SPECIALIZED S-WORKS TORCH CYCLING SHOES KEY FEATURES:
Flexible yet reinforced upper in necessary zones.
Wider sole by 4mm compared to the S-Works 7 model.
Optimized carbon sole shape through the addition of a reinforcement and removing excess material around the perimeter. The result is a 20-gram weight reduction, greater efficiency, and immediate power transfer.
The asymmetric heel cup supports the medial side and allows material to be removed from the sides and the use of a lower collar.
The BOA® cable improves fit and reduces pressure on the front ankle ligaments.
BOA® S3-Snap Fit system with independent micro-adjustment, with Boa® warranty.
Possibility to flip titanium threaded bushings to setback the cleat up to 5mm. Setup for all major pedals with three-bolt cleats.
Rear anti-slip and easily replaceable cleat.
SIZE CHART
SIZES
CENTIMETERS
41
26
41.5
26.5
42
27
42.5
27.3
43
27.5
43.5
27.9
44
28.3
44.5
28.6
45
29
45.5
29.3
46
29.5
46.5
29.9
47
30.2
Specialized
SPECIALIZED S-WORKS TORCH LACE SHOES
from €170,00
€340,00
SPECIALIZED S-WORKS TORCH LACE SHOES
The new S-Works Torch Lace combines the timeless upper style with laces with unparalleled performance in efficiency, lightness, and comfort. A shoe that “disappears on the foot.” Like every one of our shoes, it is made according to Body Geometry criteria: identify a hotspot, solve it with design, and validate the concept with the scientific method. This is how we improve comfort, performance, and reduce the risk of sports-related injuries.
Comfort: The forefoot of the S-Works Torch Lace, developed thanks to Retül data and numerous foot scans, is 4 mm wider than the S-Works 7. The zone upper is flexible enough to adapt to many foot shapes without deforming, ensuring a secure and consistent fit. The asymmetrical heel counter prevents ankle blisters while providing the necessary knee stability.
Efficiency: Each of our Body Geometry shoes with the patented Varus Wedge that creates a 1.5 mm outward tilt improves ankle, knee, and hip alignment for a stable pedal stroke. Thanks to the lace closure, carbon outsole, and lightweight upper, the weight of the S-Works Torch Lace is reduced, only 200 grams for a size 42 shoe. The internal I-Beam reinforcement in the carbon outsole creates the perfect weight-to-strength ratio for the hard efforts of professional runners.
Style: Beauty is in the eye of the beholder, and those who see the S-Works Torch Lace will admire them as long as they can stay behind you. A classic style, a discreet and elegant color for a shoe that will take you to the finish line or to the top of the mountain to admire the sunset.
SPECIALIZED S-WORKS TORCH LACE SHOES CARATTERISTICHE PRINCIPALI:
The new upper with reinforcements and zone flexibility creates a comfortable and consistent fit.
The new sole is 4 mm wider than the standard width (the previous S-Works 7 shoes) and was developed thanks to numerous Retül foot scans.
The carbon sole with internal I-Beam reinforcement is 20 grams lighter than the previous version but with the same stiffness.
An updated shape more closely follows the foot contours on the sides for a snug fit.
The asymmetric heel counter supports the medial side and is lowered laterally.
The lace closure is simple and allows you to adjust the fit along the entire foot.
The titanium threaded fittings can be reversed to further move the cleat back up to 5 mm. Ready for all major pedals with three-bolt cleats.
Rear anti-slip platform and easily replaceable.
Indicated weight 200 grams per shoe, size 42.
Specialized
SPECIALIZED S-WORKS TORCH ROAD SH...
€599,00
SPECIALIZED S-WORKS TORCH ROAD SHOES REMCO
Developed together with Remco, it weighs only 148.2 g and is the lightest shoe in the group.
The lightest shoes, for the fastest man in the worldS-Works Torch RemcoThe S-Works Torch Remco, developed with Evenepoel, weighing only 148.2 g per shoe, is not only the lightest shoe in the group but also the new benchmark for optimal mountain riding. Every gram, every detail has been perfected with the help of Remco, applying our Body Geometry methodology. The goal? To improve power and performance, reducing forefoot pressure by 44%. A shoe designed for Grand Tours, tested by Remco, in the heat of his early battles in the Tour de France.
SPECIALIZED S-WORKS TORCH ROAD SHOES REMCO MAIN FEATURES:
Use: Road racing
Body Geometry shape: The optimized shape with Body Geometry technology reduces forefoot pressure by 44%
Weight: 148.2 g per shoe (size 41).
Adjusting system: BOA® Fit System with Single-Dial Li2
Compatible insoles: Body Geometry SL Gen 2 insoles
Men's Shoes - Size Chart
Size (cm)
EURO
USA
UK
BRAZIL
22.5
35
3.5
2.5
33
23
36
4.25
3.25
34
23.5
37
5
4
35
24.5
38
5.75
4.75
36
24.75
38.5
6
5
36.5
25
39
6.5
5.5
37
25.25
39.5
7.25
6.25
37.5
25.5
40
7.5
6.5
38
25.75
40.5
7.75
6.75
38.5
26
41
8
7
39
26.5
41.5
8.5
7.5
39.5
27
42
9
8
40
27.3
42.5
9.3
8.3
40.5
27.5
43
9.6
8.6
41
27.9
43.5
10.25
9.25
41.5
28.3
44
10.6
9.6
42
28.6
44.5
11
10
42.5
29
45
11.5
10.5
43
29.3
45.5
11.75
10.75
43.5
29.5
46
12.25
11.25
44
29.9
46.5
12.6
11.6
44.5
30.2
47
13
12
45
30.9
48
13.75
12.75
46
31.6
49
14.5
13.5
47
32.3
50
15.5
14.5
48
Specialized
SPECIALIZED S-WORKS TORCH WIDE SHOES
€351,00
€390,00
SPECIALIZED S-WORKS TORCH WIDE SHOES
The S-WORKS TORCH WIDE shoes are Specialized shoes perfect for road cycling. Thanks to the Body Geometry, biomimetics, data science, and the skills of Specialized artisans, it has been possible to design this shoe so light that you forget you’re wearing it. The BOA® cable is positioned downward so the forefoot does not lift. Thanks to this invention, the Velcro strap has been eliminated and the shoe’s structure improves power delivery and eliminates unwanted pressures and pinches.All materials used for the upper move with the foot without hindering it during pedaling, offering maximum comfort, and the reinforced areas keep the foot wrapped for a clean power output and optimal efficiency.Inside the sole is an internal reinforcement for greater rigidity and strength: the result is a weight reduction of 20 grams, greater efficiency, and immediate power transfer.The part of the shoe that accommodates the Achilles tendon, compared to previous models, is asymmetric, offers more space, and maintains an excellent connection.
SPECIALIZED S-WORKS TORCH WIDE SHOES KEY FEATURES:
Flexible but reinforced upper in the necessary areas.
Sole wider by 4mm than the S-Works 7 model.
Optimized carbon sole shape by adding a reinforcement and removing excess material around the perimeter. The result is a weight reduction of 20 grams, greater efficiency, and immediate power transfer.
The asymmetric heel counter supports the medial side and allows material to be removed from the sides and the use of a lower collar.
The BOA® cable improves fit and reduces pressure on the front ankle ligaments.
BOA® S3-Snap Fit system with independent micro-adjustment, with Boa® warranty.
Possibility to invert the titanium helical bushings to move the cleat back up to 5mm. Setup for all major pedals with three-bolt cleats.
Non-slip, easily replaceable rear plate.
NB: IMPORTANT FOR THE WIDE LAST VERSION*** THE NEW SOLE IS 4 MM WIDER THAN A STANDARD SOLE (8MM WIDER THAN THE S-WORKS 7).
SIZE CHART
SIZES
CENTIMETERS
41
26
41.5
26.5
42
27
42.5
27.3
43
27.5
43.5
27.9
44
28.3
44.5
28.6
45
29
45.5
29.3
46
29.5
46.5
29.9
47
30.2
ARTICLE CODE
61022-0341 (Size 41 - Color: Black) / 61022-0342 (Size 42 - Color: Black) / 61022-0342.5 (Size 42.5 - Color: Black) / 61022-0343 (Size 43 - Color: Black) / 61022-0343.5 (Size 43.5 - Color: Black) / 61022-0344 (Size 44 - Color: Black) / 61022-0344.5 (Size 44.5 - Color: Black) / 61022-0345 (Size 45 - Color: Black)
Specialized
SPECIALIZED TORCH 1.0 ROAD 2023 S...
€76,50
€85,00
SPECIALIZED TORCH 1.0 ROAD 2023 SHOES
The SPECIALIZED TORCH 1.0 ROAD 2023 SHOES offer high performance, ergonomics, and comfort. The Boa® L6 dial allows slight adjustment of the fit while the sole provides the right stiffness.
SPECIALIZED TORCH 1.0 ROAD 2023 SHOES MAIN FEATURES:
Body Geometry sole and insole with ergonomic design, scientifically tested for high power transfer to increase efficiency and reduce the risk of injury by optimizing hip, knee, and foot alignment.
Printed nylon outsole, lightweight and moderately rigid. Rigidity index 6.0.
Boa® L6 dial for easy and precise adjustment.
Upper in synthetic leather and mesh fabric.
Compatible with most three-bolt pedal types.
Approximate weight 263g (one shoe size 42).
ARTICLE CODE
61023-5041 (Size 41 - Color: Oak Green/Dark Moss Green) / 61023-5042 (Size 42 - Color: Oak Green/Dark Moss Green) / 61023-5043 (Size 43 - Color: Oak Green/Dark Moss Green) / 61023-5044 (Size 44 - Color: Oak Green/Dark Moss Green) / 61023-5045 (Size 45 - Color: Oak Green/Dark Moss Green) / 61023-5046 (Size 46 - Color: Oak Green/Dark Moss Green)
Specialized
SPECIALIZED TORCH 2.0 ROAD 2023 B...
from €100,00
€199,99
SPECIALIZED TORCH 2.0 ROAD 2023 BIKE SHOES
The SCARPE SPECIALIZED TORCH 2.0 ROAD offer high comfort and maximum performance. The upper is entirely mesh and TPU provides ample toe room and a less constrictive feel compared to wearing a sock. The upper is paired with the FACT carbon sole with medium stiffness and the rubber heel and toe provide the perfect level of traction off the bike. The lightweight Boa® IP1 micro-adjustment system allows easy adjustment of the shoe even while riding.
SPECIALIZED TORCH 2.0 ROAD 2023 BIKE SHOES MAIN FEATURES:
The sole structure and Body Geometry insoles are ergonomically designed and scientifically tested to increase power, improve efficiency, and reduce the likelihood of injury by optimizing hip, knee, and foot alignment.
The carbon sole with a stiffness index of 7.0 is rigid and light, and the rubber heel and toe provide maximum traction when you need to walk.
Lightweight Boa® IP1 Fit system for on-the-fly micro-adjustments, backed by Boa warranty.
Mesh and TPU upper for a comfortable fit.
The three-bolt cleat pattern fits all major road pedals.
Weight (approx.): 235 g.
Specialized
SPECIALIZED TORCH 3.0 ROAD SHOES
from €192,50
€250,00
SPECIALIZED TORCH 3.0 ROAD SHOES
If you love chasing PRs on Strava, or you enjoy climbs, the new Torch 3.0 is a perfect choice. Aesthetics, first-class construction, and exceptional comfort bring the Torch 3.0 close to the S-Works version of this shoe. Elements such as the uni-directional carbon outsole, dual Boa closure, and seam-free upper make the Torch 3.0 efficient, comfortable, reliable, and high-performing.
The Body Geometry method: evolution has led us to walk, not pedal, which could result in foot collapse or misalignment of foot, knee, and hip. The Torch 3.0, like all Body Geometry shoes, helps solve these problems thanks to three patented technologies – varus spread, longitudinal arch, and metatarsal support – to increase pedal power without sport trauma. All of this is supported by scientific validation and two decades of field experience.
Carbon sole: The Torch 3.0 features a lightweight uni-directional carbon sole that provides balanced rigidity throughout the shoe, using less material and thus reducing overall weight. This sole ensures very efficient power transfer, quite similar to that of the S-Works shoe. Large rubber inserts on the sole, at the toe and heel, provide stability and traction when dismounting the bike to place the foot at the traffic light or to restart.
Comfort: For comfort, the construction is essential – balanced rigidity, fine adjustment, and a flexible upper constitute the right mix to optimize comfort. The Torch 3.0, a shoe with a perfect fit, highly efficient, dual Boa Li2 closure, and a seamless TPU and perforated upper.
SPECIALIZED TORCH 3.0 ROAD SHOES KEY FEATURES:
Body Geometry ergonomic sole and insole design, scientifically tested for high power transfer, to increase efficiency and reduce the risk of injury by optimizing the alignment of hip, knee, and foot.
Carbon fiber sole with rubber coating on the heel and toe for excellent traction.
Dual Boa® Li2 closure for micro-adjustment even when seated in the saddle, with Boa® guarantee.
Perforated fabric, TPU and synthetic leather upper and construction that promotes comfort where needed, footwear fit efficiency.
Heel cradle secures the foot and provides support.
Compatibility with most 3-bolt pedal types.
Approximate weight: 288 g. (a size 42 shoe).
UDOG
SCARPE UDOG CIMA PURE BLACK
€225,00
€250,00
SCARPE UDOG CIMA PURE BLACK
The SCARPE UDOG CIMA PURE BLACK represent the perfect mix of maximum comfort, high performance, rigidity and softness. This climbing shoe is lightweight, rigid (rigidity index 11), highly breathable and quick-drying. The toe box offers maximum comfort and freedom of movement while the heel area is deep and narrow with an innovative construction to eliminate pressure points in the most sensitive area of your feet. The shoe closes with Udog proprietary laces which, compared to others, have a flatter construction that does not easily come undone. In size 42, the shoe weighs 240 g.
UDOG CIMA PURE BLACK MAIN FEATURES:
Lightweight, ultra-rigid climbing shoe (rigidity index 11), breathable and quick-drying.
Weight (size 42) 240g.
Closure with Udog proprietary laces which, compared to others, have a flatter construction that creates a better knot that does not easily come undone.
ARTICLE CODE
UDCIMABOB
UDOG
UDOG SHOES DISTANCE ASH GREY
€162,00
€180,00
UDOG SHOES DISTANCE ASH GREY
The UDOG SHOES DISTANCE ASH GREY are perfect for gravel/off-road downhill riding. They feature an innovative rubber sole that wraps around the toes for greater durability and protection. The model is equipped with a TWS wrapping system: a dynamic tension wrap system that fully embraces the midfoot area. The tension wrapping system allows for greater power transfer to the pedal and ensures maximum comfort. Knit Technology: knit technology for maximum comfort in any situation. The upper of the shoe is light, supportive, highly breathable, and waterproof. The super-soft sock-like material adapts to any foot shape, and several technical motifs are used inside the single-knit upper for optimal performance and comfort. The sole is reinforced rubber with carbon nylon, and the weight of the shoe is 330 g in size 42.
UDOG SHOES DISTANCE ASH GREY MAIN FEATURES:
Gravel Shoes.
TWS wrapping system
Knit Technology.
Shoe weight (size 42): 330g.
ARTICLE CODE
UDDISGREY
UDOG
UDOG DISTANCE CARBON CINDER BLACK...
€225,00
€250,00
UDOG DISTANCE CARBON CINDER BLACK SHOES
The UDOG DISTANCE CARBON CINDER BLACK SHOES are perfect for gravel/off-road descending. They feature an innovative rubber sole that wraps around the toes for greater durability and protection.The model is equipped with a TWS wrap system: a dynamic tension wrap system for the metatarsal area that fully embraces the metatarsal region of the foot. The tension wrap system allows for greater power transfer to the pedal and ensures maximum comfort. Knit Technology: knit technology for maximum comfort in any situation. The upper part of the shoe is lightweight, supportive, highly breathable and waterproof. The super-soft sock-like material adapts to any foot shape and several technical patterns are used inside the single-knit upper for optimal performance and comfort.The sole is a full carbon composite rubber. Shoe weight 315 g (size 42).
UDOG DISTANCE CARBON CINDER BLACK SHOES MAIN FEATURES:
Gravel shoes.
TWS wrap system
Knit Technology.
Shoe weight (size 42): 315 g.
ARTICLE CODE
UDDISCBOB
SDG
SDG SELLA BEL-AIR II TI-ALLOY
€77,95
€129,91
SDG SELLA BEL-AIR II TI-ALLOY
The SDG Bel Air Ti-Alloy saddle with alloy rails is a saddle designed for all MTB categories, particularly for All Terrain Trekking. The saddle is covered in microfiber, ensuring seating comfort, and the Kevlar-reinforced sides provide strength and durability. The saddle has been redesigned to be much more aggressive and high-performing.
SDG SELLA BEL-AIR II TI-ALLOY MAIN FEATURES:
Timeless design for optimal comfort every day
Rear Rise Platform: light central channel that reduces pressure points on the perineum
Ergonomic PU foam
Covered in nylon and microfiber
Ti-Alloy rails
Weight: 240g
Dimensions: 270mm x 140mm
SDG
SDG SELLA CIRCUIT TI ALLOY
€64,94
€99,91
SDG SELLA CIRCUIT TI ALLOY
The Circuit Ti Alloy saddle is designed for All Mountain, Trail, Enduro, and XC riding. The saddle is made of Nylon, making it durable and stable, with Kevlar sides and, inside, ultra-light EVA padding. The Circuit Ti Alloy offers a flat ergonomic design, making it extremely comfortable. Titanium alloy rails.
sdg Circuit Ti Alloy saddle key features:
Titanium alloy rails
Ideal for All Mountain, Trail, Enduro, and XC
Material: nylon
EVA padding
Length x Width: 280 millimeters x 135 millimeters
Weight: 215g
SDG
SDG SELLA FLY MOUNTAIN STEEL
€41,95
€69,91
SDG SELLA FLY MOUNTAIN STEEL
The Fly MTN Steel saddle is SDG's ideal saddle for All Mountain, Trail, XC, and Enduro. Made of nylon, with Kevlar sides, the saddle is very sturdy and durable, and it also ensures maximum comfort thanks to the Flat-Forward platform that allows the rider to move freely on it. Inside we find an EVA foam padding and the Peri-Canal which helps reduce discomfort and pain in the perineal area. The front part is slightly longer than usual to facilitate climbing. Steel rails complete the setup.
SDG SELLA FLY MOUNTAIN STEEL key features:
Material: nylon with Kevlar sides
EVA foam padding
Flat-Forward platform for full freedom of movement
Steel rail
Peri-canal to relieve discomfort in the perineal area
Length x Width: 260 mm x 133 mm
Weight: 215 g
SDG
SDG SELLA ROCK CITY
€29,94
€49,90
SDG SELLA ROCK CITY
The Rock City saddle is the SDG-branded saddle with urban design, ideal for zipping around in total comfort on city streets. This design offers the rider maximum comfort, while being extremely resistant and lightweight. It features Chrome rails and a microfiber cover.
SDG SELLA ROCK CITY key features:
Urban design
Chrome rails
Microfiber cover
Disciplines: urban road
Weight: 325g
Dimensions: 275 millimeters x 150 millimeters
deity
DEITY SPEEDTRAP SADDLE
€71,38
€83,98
DEITY SPEEDTRAP SADDLE
The DEITY SPEEDTRAP SADDLE is designed to withstand the rigors of the most extreme riding, offering exceptional comfort thanks to its ergonomic shape and high-quality material. Its minimalist and modern design fits perfectly with any road bike or mountain bike, ensuring reliable performance in every situation.
DEITY SPEEDTRAP SADDLE MAIN FEATURES:
Made with high-quality material to resist wear
Ergonomic shape that provides exceptional comfort during rides
Minimalist and modern design suitable for any road bike or mountain bike
ERGON
SADDLE ERGON DONNA SM E-MOUNTAIN
€79,98
€99,98
SADDLE ERGON DONNA SM E-MOUNTAIN
The ERGON SADDLE WOMEN SM E-MOUNTAIN features dynamic, comfortable padding and its flat circumference provides excellent freedom of movement. Orthocel inserts in the seating area allow for excellent pressure distribution. The side panels reduce friction during rapid position changes.
ERGON SADDLE WOMEN SM E-MOUNTAIN MAIN FEATURES:
Women's saddle.
Use: MTB/E-Bike.
The V shape provides excellent freedom of movement.
Weight: 300g.
Shell: Nylon composite.
Rails: CroMo.
Microfiber cover.
Orthopedic foam padding with Orthocell inserts.
ARTICLE CODE
44011010
ERGON
ERGON SM SPORT GEL SADDLE DONNA
€72,00
€90,00
Selle Ergonom SM Sport Gel Women
The SM Sport MTB saddle for women features a flat yet padded shape, characterized by a relief that adapts perfectly to the female anatomy in the typical seated cycling position.
The optimized ergonomics and comfort make this saddle appealing yet comfortable and ready for top performance and freedom of movement.
Gel cushions in the genital area distribute body weight pressure for greater relief in sensitive areas, while the specifically designed shape allows rapid position changes and correct body posture relative to the measurements of your MTB.
All that’s left is to try this very comfortable saddle... you’ll feel like you’re pedaling sitting on a cushion!
Selle Ergonom SM Sport Gel Women Main features:
- Orthopedic foam in the gel inserts to reduce pressure in the areas
ERGON
SELLA ERGON SR COMP
€79,99
€99,99
SELLA ERGON SR COMP
The SELLA ERGON SR COMP is designed to be mounted on road bikes and is lightweight and comfortable. The flat, padded surface, ergonomic shape, raised channel, and OrthoCell® inserts help distribute all the weight properly on the saddle. The Y-shaped design helps provide maximum freedom of movement.
SELLA ERGON SR COMP MAIN FEATURES:
Use: road.
Weight: 260g.
Nylon shell.
TiNox rails.
Microfiber cover.
Comfort orthopedic foam padding with Orthocell inserts.
Size S: Ischial bone distance: 9-12 cm.
Size M: Ischial bone distance: 12-16 cm.
ARTICLE CODE
ER-44062020
ERGON
SELLA ERGON SR SPORT WOMAN
€71,99
€89,99
SELLA ERGON SR SPORT WOMEN
The SR Sport MTB saddle for women features a flat yet padded shape, characterized by a relief that adapts perfectly to female anatomy in the typical seated position for pedaling.
With the help of a professional women’s cycling team, the ergonomics and comfort are optimized, making this saddle attractive yet comfortable and ready for top performance and freedom of movement.
Gel cushions in the genital area distribute body weight pressure for greater relief in sensitive areas, while the specifically designed shape allows quick position changes and correct body posture in relation to your MTB’s measurements.
All that’s left is to try this very comfortable saddle… you’ll feel like you’re pedaling sitting on a cushion!
SELLA ERGON SR SPORT WOMEN TECHNICAL SPECIFICATIONS
- Weight: 275 g
- Orthopedic foam in the gel inserts to reduce pressure in the zones
FIZIK
SELLA FIZIK ANTARES VERSUS EVO 00...
€351,12
€399,00
SELLA FIZIK ANTARES VERSUS EVO 00 ADAPTIVE
The SELLA FIZIK ANTARES VERSUS EVO 00 ADAPTIVE features a 3D-printed upper covering and the special multidensity manufacturing method provides high support and is shaped to the body. The shell and rail are carbon and the central-channel design relieves pressure in the perineal area. The saddle is slightly wavy and is suitable for riders with a medium degree of body flexibility and low pelvic rotation.
FIZIK ANTARES VERSUS EVO 00 ADAPTIVE MAIN FEATURES:
Adaptive Cover: 3D printing technology, seamless, with excellent support and pressure relief in the central area.
Versus EVO Structure: Channel design along the full length that relieves pressure in the perineal area.
00: Upper shell and high-modulus carbon chassis combination.
Perfect saddle for riders with a medium degree of body flexibility and low pelvic rotation.
Carbon rail 7x10 mm.
Width: 139 mm.
Length: 274 mm.
Weight: 180 g.
Height at 75 mm: 54 mm.
Length from tip to 75 mm: 151 mm.
ARTICLE CODE
77A5DODA1P002
FIZIK
SELLE FIZIK ANTARES VERSUS EVO R1...
€263,99
€299,99
SELLE FIZIK ANTARES VERSUS EVO R1 ADAPTIVE
The FIZIK ANTARES VERSUS EVO R1 ADAPTIVE> is crafted with a top cover printed in 3D. This specialized multidensity manufacturing method provides high comfort and continuous, shaped support to the body's contours. The channel design in the central part relieves pressure in the perineal area.The saddle is slightly wavy and is ideal for riders with a medium level of body flexibility and low pelvic rotation. The shell is reinforced nylon with a carbon rail 7x10 mm.
FIZIK ANTARES VERSUS EVO R1 ADAPTIVE KEY FEATURES:
Adaptive Cover: 3D printing technology, seamless and high support and pressure relief in the central area.
The channel design, along the entire length of the saddle, relieves pressure in the perineal area.
R1: Flexible shell in carbon-reinforced nylon.
Ideal saddle for riders with a medium degree of body flexibility and low pelvic rotation.
Carbon rail 7x10 mm.
Width: 139 mm.
Length: 274 mm.
Height at 75 mm: 58 mm.
Length from tip to 75 mm: 148 mm.
ARTICLE CODE
70A5DODA0P002
Pro-M
SELLA FIZIK ARIONE R1 CARBON
€175,11
€198,99
FIZIK ARIONE R1 CARBON SADDLE
Arione R1: a saddle that offers the best for those seeking lightness and flexibility. The Arione has a flat profile, a narrow nose, and is longer than any other fi'zi:k road saddle. The injected carbon shell uses Wing Flex technology, which makes the point where the thighs meet the saddle flexible; the braided carbon fork. It is suitable for the Snake cyclist. Available in two width options: on this Large the width is greater.
FIZIK ARIONE R1 CARBON MAIN FEATURES:
Saddle rails: Carbon Braided 7x10mm
Covering: Co-injected carbon composite in Nylon WingFlex
UPPER: Black Microtex heat-bonded
GASKETS: Black Microtex rubbery
WEIGHT (g): 175
DIMENSIONS (mm): 300x140
Compatible with integrated clip system
FIZIK
SADDLE FIZIK TEMPO ALIANTE R1
€175,11
€198,99
SELLA FIZIK TEMPO ALIANTE R1
Aliante is a road endurance bicycle saddle with a wavy profile, featuring a pressure-relief hole and dual-density foam for maximum comfort even on longer rides.
SELLA FIZIK TEMPO ALIANTE R1 MAIN FEATURES:
- Saddle rails in 7x9mm carbon
- Cover: WingFlex carbon-reinforced nylon shell
- Padding: Dual-density foam
- Dimensions (mm): 277x155
- Weight (g): 186