Products

REAR WHEEL SHIMANO WH-RS710-TL-R12 11/12V CENTERLOCK Shimano has elevated carbon wheels to new levels. Thanks to a development path shared with DURA-ACE and ULTEGRA, the new full carbon wheels offer balanced performance at a more affordable price. The C46, an extraordinarily versatile model, shares its DNA with the DURA-ACE and ULTEGRA C50 wheel options. REAR WHEEL SHIMANO WH-RS710-TL-R12 11/12V CENTERLOCK key features: 11/12-speed bicycle wheel Compatible with CENTER LOCK disc brakes Made of carbon for balanced performance Versatile model with DNA shared with DURA-ACE and ULTEGRA

REAR WHEEL SPECIALIZED ALPINIST CL II TUBELESS 700C The REAR WHEEL SPECIALIZED ALPINIST CL II TUBELESS 700C features the same rim as the Alpinist CLX II: a very slight increase in power delivered to the pedals results in immediate acceleration, and a perfect line can be traced in curves. The wheel exceeds the resistance standards of any certification body by nearly twofold. The wheel uses DT Swiss 350 hubs with Star Ratchet system, straight-pull spokes 24 DT Swiss CompRace, Pro Lock alloy nipples. The tubeless system offers high rolling resistance and advantages in handling and better puncture protection. The rim with a single tooth allows pressures up to 110psi and easy tire installation. REAR WHEEL SPECIALIZED ALPINIST CL II TUBELESS 700C MAIN FEATURES: Rims: Alpinist CLX Carbon Clincher, 700c, disc brake, Tubeless Rim details: depth 33mm, external width 27mm, internal width 21mm DT Swiss 350 Straighpull Center Lock hubs, Internals Star Ratchet 36t (10 degs), 100x12mm & 142x12mm, Shim. RD 11SP HG freewheel Sealed cartridge bearings DT Swiss steel DT Swiss Competition Race straight-pull spokes, Rear Two-cross (1:1) 24 spokes on drive side 283mm on opposite side 287mm Nipples: DT Swiss Hex Prolock Al 2.0x14mm. Tires: section 24mm - 38mm / Maximum pressure: 24mm-35mm: Tubeless (110psi) with Tube (130psi)/ 36mm-38mm: Tubeless (60psi) with tube (60psi) Weight: 769 g (incl. Tape and tubeless valve 15g). ARTICLE CODE 30022-5302

SPECIALIZED CLX II 700C REAR WHEEL The FRONT WHEEL SPECIALIZED RAPIDE CLX II 700C combines the TT wheel aerodynamics with the lighter, less deep rims for climbing. When you add the efficiency and handling of a tubeless system, you get maximum speed for all kinds of races.Different profiles for the front and rear wheels reduce aerodynamic drag compared to most 65mm wheel pairs, even in very windy conditions. Stability increases by 25% compared to 50mm rims.The tooth design of the Rapide CLX II allows a maximum pressure of 110 psi, and ensures both perfect tire grip and easy installation. The wheel uses the AeroFlange hub, aerodynamically optimized, SINC Ceramic bearings and DT Swiss EXP internals. SPECIALIZED CLX II 700C REAR WHEEL MAIN FEATURES: Rim Rapide CLX Carbon Clincher, 700c, for disc brakes, Tubeless. Depth 51mm. External width 35mm. Internal width 21mm. Hub: Roval Aero (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t (10 degs), 100x12mm & 142x12mm, Shimano RD freewheel. 11SP HG. Bearings: DT Swiss SINC Ceramic. Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 spokes, drive side 257mm, opposite side 252mm. Nipples: DT Swiss Hex Prolock Al 2.0x14mm. Tires: section 24mm - 38mm / Maximum pressure: 24mm-35mm: Tubeless (110psi) with tube (130psi) / 36mm-38mm: Tubeless (60psi) with tube (60psi). Weight: 810g (including tape and tubeless valve 15g). Hand assembled. ARTICOLI CODICE 30022-5912

REAR WHEEL SPECIALIZED CLX II 700C With the new Alpinist CLX II wheels you’ll feel your bike “come alive,” thanks to the ultra-light tubeless-ready rims we’ve ever made. Explosive acceleration, magic in corners, sublime on rough roads, all with the performance of a tubeless system. For climbs these wheels don’t carry a gram of excess, because perfection is reached when you can’t remove anything else. Lightness alone isn’t enough to obtain the responsiveness and handling of the Alpinist CLX II tubeless wheels. The pair was designed as a system and our engineers tested every part – hubs, rims, spokes – and development started from Tubeless tires. The result is a wheelset weighing 1250 grams, with unmatched ride quality. The tooth design of the Alpinist CLX II (which allows reaching a pressure of 110 psi if that’s what you want) guarantees perfect tire grip and easy installation. All this in a light wheelset that nearly doubles the current strength standards. The new AF hubs are 50 grams lighter than the previous Alpinist CLX hubs. The bearings are SINC Ceramic, the internals DT Swiss EXP. REAR WHEEL SPECIALIZED CLX II 700C MAIN FEATURES: Rims: Alpinist CLX Carbon Clincher, 700c, disc brake, Tubeless Rim details: Depth 33mm, External Width 27mm, Internal Width 21mm Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t (10 deg), 100x12mm & 142x12mm, 11SP Shimano freehub DT Swiss SINC Ceramic bearings DT Swiss Aerolite T-head spokes, Front Radial/One-cross (2:1) 21 spokes driving side 276mm, opposite side 290mm - Rear One-cross/Two-cross (2:1), driving side 288mm opposite side 286mm DT Swiss Hex Prolock nipples Al 2.0x14mm Tires: section 24mm - 38mm / Maximum pressure: 24mm-35mm: Tubeless (110psi) with Tube (130psi) / 36mm-38mm: Tubeless (60psi) with tube (60psi) Pair weight 1,265g, Front 571g, Rear 694g (incl. Tubeless tape and valve 15g) Hand-built Extras: Roval rim tape, Spoke and nipple kit Maximum load 125kg

REAR WHEEL SPECIALIZED ROVAL RAPIDE CLX III 700C BLACK WHITE Lightness where needed. Aerodynamics where it counts most. Unmatched puncture protection. The fastest racing wheels in the world. Period.Roval Rapide CLX IIIThe new Roval Rapide CLX III overturns aerodynamic principles to give you unbeatable speed in every situation. The front wheel, with a higher profile, slices through air where it matters most. The rear wheel, with a lower profile and carbon spokes, weighs 215 g less and delivers explosive acceleration and millimeter precision control. But that’s not all: thanks to the FlatStop bead, which provides 39% more puncture resistance, they offer the most effective protection in their category. With Roval Rapide CLX III wheels, you’ll go faster on any track. REAR WHEEL SPECIALIZED ROVAL RAPIDE CLX III 700C BLACK WHITE MAIN FEATURES: Rims Rear Rim Rapide CLX III Carbon Clincher Rear, 700c (CR2471) Rear Rim Dimensions Depth: 48mm, External Width (at widest point): 31.3mm, Internal Width: 21mm, Bead Hook Width: (4.1)mm Rim Construction Carbon Clincher Hooked Wheel Size / ETRTO 622 × 21 (700c) Number of Holes Rear: 24H Tubeless Compatibility Yes Compatibility with Inserts Yes Brake Compatibility Disc (Centerlock) Valve Length Roval Tubeless Valve, Alloy 70mm Hubs Rear Hub Roval Low Flange Road Hub, Center Lock, 12x142mm, (LF19-R) Rear Hub Bearing DT Sinc Ceramic Bearings - DS:1526 (15 x 26 x 7 mm), NDS: 6802 (15 x 24 x 5 mm) Rear Freehub Body DT Swiss Ratchet EXP (36T): Sram XD-R Spokes & Nipples Rear Spokes Roval by Arris, Composite Aero Spoke with Ti End Pieces: T-head, 24qty, (DS: 277mm, NDS: 273mm) Rear Lacing Pattern One-Cross / Three-Cross (2:1), Not Tucked Nipples Arris MK4 Spoke Nipple Alloy, 6 mm Tire Info Approved Tire Widths 24mm-38mm Max Pressure Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) Tire Type Clincher Tubeless and Clincher Tube Type Tubeless Tape Width 25mm Design Tire RapidAir TLR, 28mm Weight Front Weight 600g (with valves and tape) Rear Weight 705g (with valves and tape) Wheelset Weight 1305g (with valves and tape) General Extras 4 Extra Spokes and Nipples, Roval Wheel Bag, Shimano HG 11/12-Spd. Road Freehub & end Caps (rear wheel only) E-bike Approved No Certifications ISO 5775-2, UCI Approved Weight Limit 275 lbs. / 125 kg. Assembly Method Hand Built Warranty Limited Lifetime Warranty

REAR WHEEL SPECIALIZED ROVAL TRAVERSE HD 350 29 32H The Traverse HD wheels are the most durable carbon trail wheels we’ve ever tested. Designed for those who push hard even when they shouldn’t, they can withstand every kind of impact and terrain. The Traverse HD 350 DEG are made to stop for nothing. REAR WHEEL SPECIALIZED ROVAL TRAVERSE HD 350 29 32H main features: Use: Demanding trails, enduro Weight: 1,884 g (with valves and tape) Recommended tires: Butcher and Eliminator Internal width: 30 mm Hub: DT Swiss 350 DEG Spoke count: Rear 29″ and 27.5″: 32

REAR WHEEL SPECIALIZED ROVAL WHL CONTROL CARBON 29 148 XX1 PRO OE Spec rear wheel made with Control Carbon 29 rim and DT Swiss 350 Boost hub. Wheel size: 29" Dropout spacing: 12x148mm Dropout type: through axle Number of spokes: 28 Lacing pattern: 2-cross Spoke type: J Bend Rim material: carbon Rim width: 25 mm internal Brake type: Disc Rotor mounting: 6 bolts Code S195500007

REAR WHEEL SPECIALIZED ROVAL WHL MY16 ROVAL TRAVERSE WHL MY16 TRAVERSE SL 27.5 REAR CARBON TA 12X148MM DISC 6 BOLTS 28H SRAM XD FHB (LFM02R) – SATIN CARBON WITH DCL BLACK CODE S165500021

ZIPP 303 FIRECREST TLR REAR WHEEL DISC 24 SPOKES AXLE THRU. 12MM XDR The REAR WHEEL ZIPP 303 FIRECREST, fast and lightweight, is perfect for riding both off-road and on-road. The wheel is wind- and rolling-resistant and was designed using real-world direct measurements.Compared to the previous version the rim is slightly more outward, the external width is 30 mm, the internal width is 25 mm and the depth is 40 mm. The profile offers low drag and a smoother transition between rim and tire, increasing aerodynamic efficiency on the road. ZIPP 303 FIRECREST TLR REAR WHEEL DISC 24 SPOKES AXLE THRU. 12MM XDR MAIN FEATURES: Firecrest Technology: more aerodynamic profile and better handling with crosswinds and ride quality. ABLC (Aerodynamic Boundary Layer Control): smooths airflow on the rim surface and adapts to the wheel. The third generation of ABLC has up to four times more dimples than before. AeroBalance: optimization of aerodynamic efficiency and transverse wind stability. TSE Technology: precise layering of the 303 Firecrest rim translates into greater efficiency for higher speed by reducing: wind resistance, rolling resistance, gravity (weight + durability), vibration losses. Tubeless tire compatible. Only compatible with disc brakes (Center Lock). Hub: Sram XD-R. Rim depth: 40 mm. Internal width: 25 mm. ZR1 DB hub. Weight: 769 g (approx.). ARTICLE CODE 00.1918.530.001

REAR WHEEL ZIPP 303 S CARBON TUBELESS-READY DISC BRAKE The REAR WHEEL ZIPP 303 S CARBON TUBELESS-READY DISC BRAKE provides all the versatility needed while maintaining the speed today’s cyclists demand. The wheel is only tubeless, mounts only on road bikes with disc brakes and can fit wide tires at low pressures, allowing easy handling on unpaved roads. The 303 S are among the lightest wheels in the Zipp lineup and are optimized to guarantee the best aerodynamic performance with a 28 mm tire, but can mount tires suitable for off-road up to 50 mm in width. The external rim width is increased by 2 mm, to 27 mm, and the tire bed is 7 mm wider (23 mm internal width). The ability to inflate the tire to lower pressures reduces rolling resistance for an even more comfortable ride. Pedaling on flat ground at 40 km/h with a 28 mm tire saves 10 watts. REAR WHEEL ZIPP 3 S CARBON TUBELESS-READY DISC BRAKE MAIN FEATURES: Perfect for fast riding with 28 mm tires but also suitable for wider gravel tires. Wide rims optimize the tire profile and allow lower inflation pressure, especially for tubeless. Larger contact area for high grip, cornering safety, and handling on wet surfaces. Lower inflation pressure and greater volume ensure a comfortable ride with fewer vibrations. Watt savings when mounting larger tires inflated to low pressures. Wide rims create a seamless transition to the tire, reducing aerodynamic drag. 76 / 176 hubs with central locking interface. Tire maximum pressure: 72.5 psi (5 bar). Disc standard: Center Lock Rear hub: 12x142 mm. Dimensions: 700c. Rims: Carbon-Hookless. Compatible only with tubeless-ready tires. Compatible with Center Lock disc brakes. Driver body type: n/a, SRAM XDR, SRAM/Shimano Road. Internal rim width: 23 mm. Rim finish: UD fiber / Bake-On labels / Matte clear coat. Rim profile: symmetric. DS spoke length: 264mm, 266mm. NDS spoke length: 266mm, 268mm. Weight: 1530. Weight based on: lighter configuration: 12mm through axles and XDR body. Tapes or valve not included in weight. Front: 711g Rear: 819g. Carbon tubeless disc brake Center Lock 700c Rear 24 Spokes SRAM 10 / 11v 12x142mm Standard A1 graphics. PART CODE 00.1918.528.000

REAR WHEEL ZIPP 404 FIRECREST TLR DISC 24 P.PASS 12 MM SHIMANO The ZIPP 404 FIRECREST TLR DISC 24 P.PASS 12 MM SHIMANO is a rear wheel perfect for staying fast on the road. Thanks to the 58 mm profile, this wheel is ideal on asphalt, time trials, triathlon, and gran fondos. The 23 mm inner width allows tubeless tires wider with reduced air pressure. This is an important component of the Total System Efficiency™ or TSE™, a Zipp concept for speed on diverse road surfaces and variable riding conditions. In particular, TSE™ focuses on overcoming specific speed obstacles: wind resistance, gravity, rolling resistance, and vibration loss. Zipp’s ABLC™-Sawtooth™ technology uses a sophisticated dimpling model to improve aerodynamic efficiency. The Hookless rim makes the tire-to-rim interface smoother and more aerodynamic; material distribution is more efficient, resulting in a lighter and more durable wheel. The wheel is fitted with the versatile and durable ZR1 DB hub designed in Germany. REAR WHEEL ZIPP 404 FIRECREST TLR DISC 24 P.PASS 12 MM SHIMANO MAIN FEATURES: Versatile aerodynamic wheel for the modern road bike with a tubeless and hookless rim profile. The wide 23 mm rim profile creates a better tire interface for speed on road or off-road. The ZR1 DB hub provides better retention, greater durability, and faster response with 66 engagement points. Centre Lock disc mounting. Usage: road bike, triathlon, cyclocross. Model: : 404 Firecrest® Carbon. Rim size: : 28. 24 spokes. Maximum supported weight: 115 kg (body weight + bike + gear). Maximum air pressure: : 5bar (73psi). Internal width: 23 mm. External width: 28 mm. Height: 58 mm. Valve hole: SV (6.5mm). Axle: 12 x 142 mm thru-axle. Rim type: CX-Ray Spokes nipples: Sapim secure-loc. Shimano freehub: 8-/9-/10-/11 speed Shimano/SRAM (Road). Carbon rim. Aluminum hub. ARTICLE CODE 00.1918.621.000

SPECIALIZED REAR WHEEL ROVAL RAPIDE CL III 700C The new Roval Rapide CL III inherits the DNA of the CLX III, revolutionizing the way aerodynamics is understood. The front wheel, with a taller profile, optimizes aerodynamic performance where it matters most. The rear, with a lower profile, weighs 35 g less for better acceleration and control. But that’s not all: thanks to the FlatStop bead, which provides 39% more puncture resistance, they offer the most effective protection in the category. With Rapide CL III wheels, you’ll go faster on any course. SPECIALIZED REAR WHEEL ROVAL RAPIDE CL III 700C Key features: Use - Road Racing & Riding Weight - 1,555 grams Hub & Engagement - DT Swiss 350 EXP, 36T Rim Depth - 51mm front, 48mm rear Spoke Count - 18F / 24R Recommended Tire Size - 28mm

WHEELS MAVIC XA ELITE 27.5 BOOST 110X15/1 48X12 XD The Mavix XA Elite 27.5" wheels derive from the "Cross Adventure" idea; they are intended for XC and bikers always seeking new trails to ride. The rim is made from lightweight and durable Maxtar aluminum alloy, and on the lower bridge there is ISM 4D machining, which improves strength and dynamic performance, as well as reducing weight. The rear hub uses waterproof bearings and a quick-start ITS 4 system with 4 small studs. The wheels feature Quest Pro tires with spaced, raised tread on the outside that ensures maximum traction and perfect cornering grip. The Dual Compound X-Mix tire with dual density and the 127 TPI carcass, reinforced by Guard+ puncture protection, complete these XC wheels. WHEELS MAVIC XA ELITE 27.5 BOOST 110X15/1 48X12 XD MAIN FEATURES: Wheel Size: 27.5" Disc Mount: 6-Bolt Tire Type: Tubetype (Inner Tube), Tubeless Ready, Tubeless Wheel Type: Pair Axle: 110x15 24 steel spokes Aluminum hubs with waterproof bearings ETRTO Size: 584x25ss

WHEELS RESERVE 30 HD AL MX I9 1/1 110 BOOST 157 HG DH Wheels are undoubtedly the most important component of your mountain bike, and that is why we have developed a completely new line of Reserve aluminum wheels for trail, enduro, and e-bike. Reserve aluminum wheels have been designed and developed to offer a product that rivals the performance of our beloved carbon wheels, but at a much more affordable price. And with our industry-leading lifetime warranty, you can be sure you’ll enjoy these wheels for many years to come. WHEELS RESERVE 30 HD AL MX I9 1/1 110 BOOST 157 HG DH KEY FEATURES: Fillmore Standard Valves: our patented Fillmore valve represents a revolutionary step forward in technology, with a high-flow design that eases tubeless installation and eliminates the traditional valve core, delicate and prone to clogging. Tested and approved: with over a year of road and lab testing, the 30|HD AL wheels are designed to withstand any stress. Like all Reserve wheels, they come with a lifetime warranty. Asymmetric design: asymmetrical rims, like those of the 30|HD AL, make the wheels stiffer, stronger, and more reliable, improving reinforcement angles and equalizing spoke tension between the drivetrain side and the opposite side. Wheelset weight (MX): Industry 9 1/1 157 mm - 2010 g Designed for: Trail, All Mountain, Enduro, Ebike Internal width: 30 mm Depth: 22 mm Rim weight: 29 580 g, 27,5 540 g Recommended tire sizes: from 2.2 to 2.6 Number of spokes: 32 Spokes: J-bend with aluminum nipples Brake disc: 6-bolt

WHEELS SANTA CRUZ RESERVE 28 XC 29 CARBON DT SWISS 180 CENTERLOCK SRAM XD Used in the XC World Cup circuit and midweek races worldwide, the Reserve 28 is designed for human-powered speed. It is our lightest mountain wheelset, at 390 g, and enables a wheelset under 1600 g (with tires), without compromising strength. There is no rider weight limit, and we offer the same lifetime warranty that we provide on all our wheels. This wheel is not compatible with Ebikes. SANTA CRUZ RESERVE 28 XC 29 CARBON DT SWISS 180 CENTERLOCK SRAM XD WHEEL FEATURES: 29 inch wheels. DT Swiss 180 hub. Centerlock. SRAM XD freehub. WHEEL WEIGHT WITHOUT TIRES 1387 g

WHEELS SANTA CRUZ RESERVE 30 HD ALUMINUM I9 1/1 6-BOLT 110 BOOST 157 XD The Reserve 30|HD AL Industry 9 1/1 MX 2024 wheel set is the perfect solution for downhill cyclists seeking high-performance at a more affordable price. Designed to compete, these wheels offer exceptional durability and reliable performance, even in the most extreme riding conditions. Whether for the bike park, races, or the most demanding rides, these aluminum wheels are covered by a lifetime warranty, a safety and ruggedness guarantee. WHEELS SANTA CRUZ RESERVE 30 HD ALUMINUM I9 1/1 6-BOLT 110 BOOST 157 XD KEY FEATURES: Wheel weight (MX): DT 350 - 1960g Industry 9 1/1 157mm - 2010g. Designed for: Trail, All Mountain, Enduro, Ebike Internal width: 30mm Depth: 22mm Rim weight: 29 580g, 27.5 540g Recommended tire size: From 2.2 to 2.6 Spokes: 32 Spokes: J-bend with aluminum nipples Disc: 6 bolts