Designed for pedals with a 6 mm hex fitting, the Park Tool HT-6 turns pedal installation and removal into a quick, clean job. The Park Tool HT-6 6mm Allen key works from the inside of the crank arm, on the hex machined into the pedal axle, where a flat wrench often cannot reach or cannot be used.
Its design is that of a sturdy screwdriver: a large ergonomic grip, built for speed, leverage and comfort, with a long 6 mm hex coming out of it. At the other end, built into the handle, a ball-end hex lets you work even with the key at an angle. With an overall length of 203 mm it offers generous leverage to free pedals that have been tight for a long time, while staying compact enough for a drawer or tool bag. The handle lets you spin the pedal quickly through the first threads and then apply the final tightening without changing tools, saving time at every pedal swap.
How to use the Park Tool HT-6 Allen key
- Insert the long hex into the 6 mm socket at the back of the pedal axle
- Remember that the left pedal is reverse-threaded and loosens clockwise
- Use the ball end for quick threading when access is angled
- Finish tightening with the straight hex, using the full length of the key
Why choose the Park Tool HT-6
- Tool dedicated to pedals with a 6 mm hex
- Screwdriver-style grip that does not tire the hand
- Two tips: long hex and ball end on the handle
- 203 mm length, a balance between leverage and size
To swap pedals in moments, at the bench or before a ride, the Park Tool HT-6 6mm Allen key is the most practical solution.
TECHNICAL SPECIFICATIONS
General
- Code: HT-6
- Hex size: 6 mm
- Ends: long hex and ball end on the handle
- Grip: ergonomic screwdriver style
Dimensions
- Length: 203 mm
Compatibility
- Use: pedals with 6 mm hex fitting
Designed for pedals with a 6 mm hex fitting, the Park Tool HT-6 turns pedal installation and removal into a quick, clean job. The Park Tool HT-6 6mm Allen key works from the inside of the crank arm, on the hex machined into the pedal axle, where a flat wrench often cannot reach or cannot be used.
Its design is that of a sturdy screwdriver: a large ergonomic grip, built for speed, leverage and comfort, with a long 6 mm hex coming out of it. At the other end, built into the handle, a ball-end hex lets you work even with the key at an angle. With an overall length of 203 mm it offers generous leverage to free pedals that have been tight for a long time, while staying compact enough for a drawer or tool bag. The handle lets you spin the pedal quickly through the first threads and then apply the final tightening without changing tools, saving time at every pedal swap.
How to use the Park Tool HT-6 Allen key
- Insert the long hex into the 6 mm socket at the back of the pedal axle
- Remember that the left pedal is reverse-threaded and loosens clockwise
- Use the ball end for quick threading when access is angled
- Finish tightening with the straight hex, using the full length of the key
Why choose the Park Tool HT-6
- Tool dedicated to pedals with a 6 mm hex
- Screwdriver-style grip that does not tire the hand
- Two tips: long hex and ball end on the handle
- 203 mm length, a balance between leverage and size
To swap pedals in moments, at the bench or before a ride, the Park Tool HT-6 6mm Allen key is the most practical solution.
TECHNICAL SPECIFICATIONS
General
- Code: HT-6
- Hex size: 6 mm
- Ends: long hex and ball end on the handle
- Grip: ergonomic screwdriver style
Dimensions
- Length: 203 mm
Compatibility
- Use: pedals with 6 mm hex fitting
Buy safely
La connexion et les transactions sont toujours sécurisées.
Free Shipping
With DHL or GLS courier for orders over 49 euros
Do you need help?
Whatsapp: 3341036415
Mon / Fri: from 10 to 19