ODI
ODI CF V2.1 GRIPS
€35,61
€41,89
ODI CF V2.1 GRIPS
The ODI CF V2.1 GRIPS are made with Odi’s proprietary compound and feature an innovative design rich in unique characteristics, such as the carbon fiber reinforced ends.
ODI CF V2.1 GRIPS MAIN FEATURES:
Diameter 32mm, length 135mm.
Compound: TPE Pro Medium.
Trama fine, designed to best combine feedback and control.
Reversed grooves for the dita that provide extra grip where it is needed.
Single-collar Lock-on v2.1.
Slots on the palm side for greater vibration damping.
Integrated outer end caps in carbon fiber.
ODI
ODI ELITE FLOW V2.1 LOCK-ON GRIPS
€25,72
€30,26
The ODI ELITE FLOW V2.1 GRIPS feature the second-generation LOCK-ON system with a single collar, and the rubber thickness is variable so you can have more padding only where it's needed. The Elite grips have more material on only one side to offer comfort without excessively increasing the diameter and to allow the rider to position the side with the most padding where they prefer. On the outside of the knob, there is a scale ranging from -30° to +30°. Zero indicates the area with the most padding. You can rotate the knob so that the most padded part is in contact with the area of the hand that is subjected to pressure.
ODI ELITE FLOW V2.1 LOCK-ON GRIPS KEY FEATURES:
Variable rubber thickness with extra padding where needed.
Knurled design to balance comfort and traction, Half Waffle that improves control when out of the saddle.
Single collar, Lock-On version 2.1.
Soft Pro compound, for maximum vibration absorption.
Reinforced rubber outer end.
ODI
ODI ELITE MOTION V2.1 LOCK-ON GRIPS
€31,07
€36,54
After inventing the clamp-on grip, ODI introduces the Lock-On 2.1 system with a single external clamp, found on the Elite grips.
Technical information about the Odi Elite Motion V2.1 grips
Variable rubber thickness, with more padding where it's needed most
Knurled design, to optimize the compromise between comfort and traction
Single Collar, Lock-On Version 2.1
Diameter: 30mm
Soft Pro compound, for maximum vibration absorption
Reinforced rubber outer end
ODI
ODI ELITE PRO V2.1 LOCK-ON GRIPS
from €25,72
€30,26
The Elite Pros have more padding only where it is needed most, to allow the rider to spend more time in the saddle without necessarily having to use grips that are too thick.
Technical data sheet for the Odi Elite Pro V2.1 Lock On grips
Variable rubber thickness and design, with extra padding where needed most
Knurled design with ergonomic padding in alternating ribs that adapts to the rider's hands without being too bulky
Half Waffle that improves control when out of the saddle
Single Collar, Lock-On Version 2.1
Reinforced rubber outer end
odi
ODI F-1 DREAD LOCK AIR MIX GRIPS
€34,17
€40,20
The ODI F-1 DREAD LOCK AIRE COMPOUND GRIPS are super comfortable and designed for endurance and marathon racing. Designed for maximum comfort through every turn, these grips have the padding needed to always have excellent control during longer rides. They feature the exclusive ultra-soft and lightweight AIRE compound, and the offset design provides additional padding for the hands for a perfect grip every time. The soft TPE tips provide extra support and protect the grips from impacts, while the V2.1 locking system keeps the grips securely in place.
ODI F-1 DREAD LOCK AIR MIX GRIPS KEY FEATURES:
Material: Soft Pro Compound.
AIRE Technology: Air-Infused Reactive Elastomer.
Variable rubber thickness. Increased padding towards the palm of the hand.
Ergonomic finger groove design.
The rough surface allows for better control by improving grip.
Reinforced rubber outer end.
Single collar, Lock-On version 2.1.
Diameter: 34.5mm.
Weight: 115gr / pair.
ODI
ODI F-1 FLOAT GRIPS 130 MM
€16,96
€19,95
Engineered to be lightweight and high-performance, the new F-1 Series grips offer improved vibration absorption, maximum control and reduced weight.
They represent a turning point in the field of lightweight grips for “endurance” use, as they are not made of silicone or sponge, but are instead constructed by moulding, with the same material as the best ODI grips: the Soft Pro Compound.
This was made possible by the introduction of the exclusive AIRE compound, which infuses air into the grip, reducing its weight by over 30%, optimizing the material's response to stress, and improving comfort. Grip and control are also superior, thanks to the surface that provides hands with excellent adhesion in any condition.
The internal part, in contact with the handlebar, is made with a different compound, to prevent the grip from slipping and to increase its lifespan.
We recommend installing using compressed air or lightly moistening the handlebars with denatured alcohol to help the grip slide. Do not use soap or oil!
Technical information Odi F-1 Float Grips
Material: Soft Pro Compound
AIRE Technology: Air-Infused Reactive Elastomer
Smooth circular design
Rough surface, improves grip and control
Double compound, with reinforced internal part that increases its durability
Open outer end, plastic caps included
Average diameter: 31.5mm
Weight: ~34gr each.
Made in USA
ODI
ODI F-1 VAPOR GRIPS
€16,96
€19,95
Engineered to be lightweight and high-performance, the new F-1 Series grips offer improved vibration absorption, maximum control and reduced weight.
They represent a turning point in the field of lightweight grips for “endurance” use, as they are not made of silicone or sponge, but are instead constructed by moulding, with the same material as the best ODI grips: the Soft Pro Compound.
This was made possible by the introduction of the exclusive AIRE compound, which infuses air into the grip, reducing its weight by over 30%, optimizing the material's response to stress, and improving comfort. Grip and control are also superior, thanks to the surface that provides the hands with excellent adhesion in any condition.
The internal part, in contact with the handlebar, is made with a different compound, to prevent the grip from slipping and to increase its lifespan.
We recommend installing using compressed air or lightly moistening the handlebars with denatured alcohol to help the grip slide. Do not use soap or oil!
Technical information on the Odi F-1 Vapor grips
Material: Soft Pro Compound
AIRE Technology: Air-Infused Reactive Elastomer
Ergonomic finger groove design
Surface with circular knurling, for excellent grip in any condition
Double compound, with reinforced internal part that increases its durability
Open outer end, plastic caps included
Average diameter: 31.5mm
Weight: ~32gr each.
ODI
ODI REFLEX V2.1 GRIPS
€27,20
€32,00
The ODI REFLEX V2.1 GRIPS reduce arm pump and hand fatigue by combining the technology and features of ODI's most successful models into a single grip. They're perfect for those who spend long hours on the bike, on the trail, or in the park, and want to minimize fatigue without sacrificing control and performance.
ODI REFLEX V2.1 GRIPS KEY FEATURES:
Diameter 33.5mm, length 135mm.
Compound: TPE Pro Medium.
Single Lock-on Collar v2.1.
Reinforced integrated external caps.
Ribs near the thumb to absorb harder impacts.
Padding on the top to better dampen vibrations.
Angled waffle at the bottom follows the finger joint for increased control and ergonomics.
odi
ODI REFLEX XL V2.1 GRIPS
€27,21
The ODI REFLEX XL V2.1 GRIPS are the latest addition to the V2.1 lock-on grip line and have been specifically designed to reduce impacts and vibrations transmitted to your hands, allowing you to ride even longer with less fatigue.
ODI REFLEX XL V2.1 GRIPS KEY FEATURES:
Diameter 34.5mm, length 135mm.
Compound: TPE Pro Medium.
Single Lock-on Collar v2.1.
Reinforced integrated external caps.
Ribs near the thumb to absorb harder impacts.
Padding on the top to better dampen vibrations.
Angled waffle at the bottom follows the finger joint for increased control and ergonomics.
ODI
ODI RUFFIAN XL V2.1 GRIPS
€27,20
€32,00
The ODI RUFFIAN XL V2.1 GRIPS are made with Odi’s patented Soft Compound TPE and feature a larger, more widely spaced version of the original Ruffian design for maximum comfort and control. The addition of the new v2.1 Single-Clamp Lock-On system allows for easy mounting of grips to the handlebars.
ODI RUFFIAN XL V2.1 GRIPS KEY FEATURES:
Extra large Ruffian diamond model.
Optimal comfort and control.
Single Clamp - Locking System Version 2.1.
Proprietary ODI Soft Compound material.
Soft hand grips - reinforced for durability.
Average diameter 32MM.
ODI
ODI TROY LEE DESIGNS SIGNATURE LO...
€31,45
€37,00
When a leading company in the knob industry joins forces with a leading company in design, these results come.
ODI TROY LEE DESIGNS SIGNATURE LOCK-ON GRIPS KEY FEATURES:
The grooves help drain water and dirt
The rubber flanges covering the collars offer more support surface for the hands and greater comfort when riding leaning on the ends.
Diameter: 29.7mm
The stepped design offers a lot of grip in a small diameter
The laser-etched notches on the collar help with correct installation of the knob
ODI
ODI VANS LOCK-ON GRIPS
€28,86
€33,95
ODI and Vans have joined forces to create a grip that provides exceptional control in all conditions. The design recalls the classic Vans waffle design and is made with ODI's proprietary rubber compounds.
Technical features Odi Vans Lock on Grips
ODI Proprietary Compound
Vans ® waffle design
Diameter 30.5mm
Length 130mm
Lock-On Grip System = 100% Slip Free performance
Snap Cap™ caps included