JAGWIRE

The Jagwire Sport 1.1mm 2300mm shift cable is the ideal replacement when your shifting becomes imprecise, stiff or noisy. It is made of stainless steel with a slick finish that reduces friction inside the housing, making shifts smoother and more responsive. Stainless steel resists corrosion caused by rain, sweat and washing, so performance stays consistent for longer. The 1.1 mm diameter is the standard for Shimano and SRAM shifters, while the 2300 mm length is enough even for the rear derailleur on road, gravel and MTB bikes: just cut it to length after installation. It is a simple, affordable choice for routine maintenance of your bike or for renewing the system together with new housing. For the best result, pair it with quality shift housing and finish the end with a cable crimp. Main features of the Jagwire Sport 1.1mm shift cable Use: inner cable for derailleurs on road, gravel and MTB bikes Compatibility: Shimano and SRAM shifters Diameter: 1.1 mm Length: 2300 mm, cut to length Material: corrosion-resistant stainless steel Slick finish for low friction in the housing Ideal for maintenance and replacing the original cable

The Jagwire Pro Dropper 0.8mm 2000mm dropper post cable is the inner cable designed to operate your dropper post smoothly and precisely. The reduced 0.8 mm diameter and the slick stainless steel surface cut friction inside the housing, so the remote lever stays light and the seatpost responds instantly, whether you're climbing or about to drop into a technical descent. Stainless steel resists corrosion from water, mud and washing, keeping actuation consistent over time. The 2000 mm length gives you plenty of margin even on MTB frames with internal cable routing, before cutting it to length. It's the right choice when your dropper post becomes stiff or slow to return, or when you renew housing and cable while servicing your trail, enduro or all-mountain bike. Before buying, check that your seatpost and its remote are cable-actuated and compatible with a 0.8 mm cable. Main features of the Jagwire Pro Dropper 0.8mm cable Use: inner cable for cable-actuated dropper seatposts Diameter: 0.8 mm Length: 2000 mm, cut to length Material: corrosion-resistant stainless steel Slick finish for smooth, low-friction actuation Also suitable for frames with internal cable routing Ideal for trail, enduro and all-mountain MTB

The Jagwire Road Pro S replacement brake pad inserts are the replacement rubbers for the cartridge pad holders of Shimano and SRAM road caliper brakes. When the rubber wears down or hardens, braking loses power and becomes noisy: by replacing just the insert you keep the original holder, save money and get effective braking back. Jagwire's Road Pro compound is designed to deliver good power and progressive modulation, so you can handle descents and group riding with confidence. The black colour suits any road bike. Installation is simple: slide the old insert out of the holder, fit the new one respecting the direction of rotation and secure it with the holder's retaining screw or clip. Before buying, check that your brakes use cartridge holders compatible with Shimano/SRAM inserts. Main features of the Jagwire Road Pro S inserts Use: road bike caliper brakes Compatibility: Shimano and SRAM cartridge pad holders Road Pro compound for power and modulation Replace just the insert, keeping the holder Colour: black Spare part for routine brake maintenance

The Jagwire Pro inline brake cable adjusters let you fine-tune cable tension quickly and precisely, without tools and even mid-ride. They fit along the housing between lever and brake, and a simple turn of the barrel takes up the slack caused by brake pad or shoe wear and cable settling, keeping the lever exactly where you like it. They are particularly useful on road, cyclocross and gravel bikes with cable-operated brakes, such as cantilevers and mechanical disc brakes, where adjusting at the brake itself is awkward or limited. Made of aluminium with a black finish, they are light, strong and blend discreetly into the look of your bike. The pack contains 2 pieces, enough for front and rear brakes. Before buying, check the diameter of your brake housing. Main features of the Jagwire Pro inline brake adjusters Use: brake cable tension adjustment Inline mounting on the housing, between lever and brake Tool-free manual adjustment Material: aluminium, black colour Ideal for road, cyclocross and gravel bikes with cable brakes Pack: 2 pieces (front and rear)

The Jagwire Pro Extreme sintered disc brake pads are designed for riders who demand the most from their brakes, on the steepest trails and the longest descents. The sintered, metal-based compound handles high temperatures well and delivers powerful, consistent braking even when the brake is working hard for a long time, with slower wear than organic pads. They are also the best choice if you often ride in the wet and mud, where sintered pads keep performing very well. Jagwire's Pro Extreme line is dedicated to the most demanding use, such as trail, enduro and all-mountain riding. The pads are compatible with Shimano, Tektro and TRP brake systems: before buying, compare the pad shape and your caliper model with the manufacturer's specifications. After installation, always bed them in properly with a series of progressive stops to get maximum power right away. Main features of the Jagwire Pro Extreme sintered pads Use: trail, enduro and all-mountain MTB Compatibility: Shimano, Tektro and TRP systems (check your caliper model) Pro Extreme sintered compound, resistant to high temperatures Powerful, consistent braking on long descents Excellent performance in wet and mud Slower wear than organic pads

The Jagwire Pro semi-metallic disc brake pads for Formula are the ideal replacement if you run a Formula brake system and want versatile braking for every day. The semi-metallic compound combines a metallic portion with an organic base: it offers more power and heat resistance than an organic pad, with progressive modulation and less noise than sintered pads. The result is responsive, controllable braking that serves you on trails, mountain rides and in the wet. Pads from Jagwire's Pro line are built to last and to deliver consistent performance over time, so you can focus solely on riding. They are compatible with Formula disc brakes: since Formula pads come in different shapes depending on the model, check before buying that the shape matches your caliper. After installation, bed them in properly to get maximum power. Main features of the Jagwire Pro semi-metallic pads for Formula Use: MTB and bikes with Formula disc brakes Compatibility: Formula brakes (check pad shape and caliper model) Semi-metallic compound: balance of power, modulation and durability Good heat resistance on descents Consistent braking in dry and wet conditions Jagwire Pro line

The Jagwire Pro semi-metallic disc brake pads for Riderever, Shimano, Tektro and TRP are designed for riders on road, gravel or MTB who want consistent, well-modulated braking. The semi-metallic compound offers more power and heat resistance than an organic pad, while keeping good modulation and low noise: ideal for long descents in gran fondos, gravel rides and trails. The shape is that of the pads used on Shimano road flat mount calipers and on some two-piston MTB calipers such as the XTR M9100, which is why compatibility is very wide: Shimano Dura-Ace, Ultegra, 105, Tiagra, GRX and Metrea, plus several Tektro, TRP and Riderever models (see the full list below). Before buying, still compare your caliper model with the list. After installation, bed the pads in properly to get maximum power. Main features of the Jagwire Pro semi-metallic pads Use: road, gravel and MTB bikes with disc brakes Semi-metallic compound: balance of power, modulation and durability Shimano road and gravel: Dura-Ace R9270, R9170; Ultegra R8170, R8070; 105 R7070; Tiagra 4770; GRX RX810, RX400; RS805, RS505, RS405, RS305; Metrea U5000 Shimano MTB: XTR M9100 Tektro: HD-R310, HD-R510 TRP: Hylex Flat Mount, Hylex RS Flat Mount, HD-T910/912 Riderever: Triva, Attack-S (FM), Attack-U (FM), MCX-2 (FM), MCX-1 (FM) Always check your caliper model before buying

The Jagwire Sport organic disc brake pad set for Shimano is the replacement designed to restore the original performance of two-piston Shimano XTR, Deore XT, SLX and Deore brakes, as well as several Promax and Riderever systems. The organic compound offers a quick initial bite and easy-to-modulate braking, with quiet operation and little vibration: you will feel the difference at the lever straight away, both on MTB trails and in everyday riding. Compared with metallic compounds, organic pads work well even when cold and cause less rotor wear, making them ideal for cross country, trail, trekking and city bikes. They fit as a direct replacement for the original pads: check your caliper model in the compatibility list below, install the new pads and bed them in with a few progressive stops before tackling descents. Main features of the Jagwire Sport organic brake pad set for Shimano Use: cross country and trail MTB, trekking, city and road bikes with disc brakes Organic compound: modulated, quiet braking with little vibration Shimano XTR compatibility: M9020, M9000, M987, M985 Shimano Deore XT, SLX and Deore compatibility: M8100, M8000, M785, M7100, M7000, M675, M666, M6000, M615 and Alfine S700 Shimano road/CX compatibility: RS785, R785, CX77, CX75, R517, R515, R317, R315 Riderever compatibility: Cargo-D, ARC-E, ARC-S, ARC-U, Attack-E, Attack-U, MCX-2 (PM), MCX-1 (PM), MTN1 Direct replacement for the original pads

The Jagwire Sport organic disc brake pad set for SRAM Guide and Avid Trail is the replacement designed for four-piston SRAM Guide Ultimate, RSC, RS and R and Avid Trail brakes, fitted to many trail, all-mountain MTBs and e-bikes. The organic compound delivers a quick bite and progressive, easy-to-modulate, quiet braking: at the lever you get a precise feel that gives you confidence on steep, technical sections, without sudden lock-ups. Compared with metallic compounds, organic pads work well even when cold and cause less rotor wear; they are the ideal choice for trail riding and for riders who value feel and comfort. They fit as a direct replacement for the original pads: after installation, bed them in with a few progressive stops before tackling descents. Main features of the Jagwire Sport organic brake pad set for SRAM Guide and Avid Trail Use: trail and all-mountain MTB, e-bike Organic compound: progressive, modulated and quiet braking SRAM compatibility: Guide Ultimate, Guide RSC, Guide RS, Guide R Avid compatibility: Trail Great balance between braking power and lever control Direct replacement for the original pads

The Jagwire Sport organic disc brake pad set for SRAM Level and Avid Elixir is the ideal replacement for two-piston SRAM Level, SRAM DB and Avid Elixir brakes, widely used on cross country and trail MTBs and on many e-bikes. The organic compound offers a quick bite and smooth, easy-to-modulate braking, with quiet operation and little vibration: at the lever you feel exactly how much power you are using, even on technical sections. Compared with metallic compounds, organic pads work well even when cold and cause less rotor wear, which makes them the right choice for everyday riding and rides in dry conditions. They fit as a direct replacement for the originals: check your caliper model in the list below and, after installation, bed them in with a few progressive stops. Main features of the Jagwire Sport organic brake pad set for SRAM Level and Avid Elixir Use: cross country and trail MTB, e-bike, trekking Organic compound: modulated, quiet braking with little vibration SRAM compatibility: Level, Level T, Level TL, DB5 Avid compatibility: DB1, DB3, Elixir 1, 3, 5, 7, 9, Elixir CR, CR Mag, R, XO Avid XX and XX World Cup compatibility Direct replacement for the original pads

The Jagwire Sport organic disc brake pad set for SRAM Red 22, Force 22 and Rival 22 is the replacement designed for SRAM hydraulic road, gravel and cyclocross brakes, and it is also compatible with SRAM Level TLM and Level Ultimate MTB brakes. The organic compound offers a quick bite and progressive, quiet braking that is easy to modulate even with integrated shift levers: ideal for tackling descents, tight corners and mixed surfaces with maximum control. Compared with metallic compounds, organic pads work well even when cold and cause less rotor wear, a smart choice for road and gravel riding in dry conditions. They fit as a direct replacement for the originals: check your brake model in the list below and, after fitting, bed them in with a few progressive stops. Main features of the Jagwire Sport organic brake pad set for SRAM Red 22, Force 22 and Rival 22 Use: road, gravel and cyclocross bikes with hydraulic disc brakes; MTB with SRAM Level TLM and Ultimate Organic compound: progressive, modulated and quiet braking SRAM road/CX compatibility: Red 22 (B1), Force 22, Rival 22, CX1, S700 (B1) SRAM MTB compatibility: Level TLM, Level Ultimate Great balance between braking power and control Direct replacement for the original pads

The Jagwire Sport semi-metallic disc brake pad set for Shimano, Tektro and TRP is the replacement designed for riders who want consistent braking and long life from the most common disc brakes: Shimano Deore, Alivio, Acera and non-series, Tektro, TRP, Promax and RST. The semi-metallic compound offers excellent power, handles heat better on long descents and keeps performance stable even in the wet and mud, lasting longer than organic pads. It is the right choice for MTBs, e-bikes, trekking and commuter bikes that clock up miles in every season, with mechanical or hydraulic systems. They fit as a direct replacement for the originals: check your caliper model in the list below and, after fitting, bed them in with a few progressive stops. Main features of the Jagwire Sport semi-metallic brake pad set for Shimano, Tektro and TRP Use: MTB, e-bike, trekking, city and touring bikes with mechanical or hydraulic disc brakes Semi-metallic compound: consistent power, good heat resistance and long life Shimano compatibility: Deore T615, M525, M515, M515-LA, Alivio M4050, Acera M3050, Tourney TX805, MT500, MT400, MT200 and many non-series models (M575, M486, M446, M395, M315, UR300...) Tektro compatibility: Auriga, Aquila, Aries, Draco, Gemini, Junior, Mira, Orion, Vela series and many non-series HD/MD models TRP compatibility: HY/RD, Hylex, Hylex RS, Parabox, Slate X2, Spyre, Spyre SLC, Spyke Promax compatibility: F1, Solve, Solve-ST, Lucid, Decode R, eCapsule, DSK-909; RST: D-Power Direct replacement for the original pads

The Jagwire Sport semi-metallic disc brake pad set for 4-piston Shimano is the replacement designed for powerful trail, enduro, downhill and e-bike brakes: four-piston Shimano XTR, Deore XT, SLX, Saint and Zee, as well as many Tektro and TRP models with the same pad shape. The semi-metallic compound delivers powerful, consistent braking, handles heat well on long, repeated descents and keeps performance stable even in the wet and mud, with a longer life than organic pads. It is the ideal choice if you ride demanding trails, spend days in the bike park or ride a heavy e-MTB. They fit as a direct replacement for the originals: check your caliper model in the list below and, after fitting, bed them in with a few progressive stops. Main features of the Jagwire Sport semi-metallic brake pad set for 4-piston Shimano Use: trail, enduro, downhill MTB and e-MTB with 4-piston brakes Semi-metallic compound: consistent power, good heat resistance and long life Shimano compatibility: XTR M9120, Deore XT M8120 and M8020, SLX M7120, Saint M820 and M810, Zee M640, MT520, MT420 TRP compatibility: DH-R EVO, G-Spec DH, G-Spec DH-R, Quadiem, G-Spec Quadiem, Trail EVO, Slate EVO, Slate T4, G-Spec Slate, Zurich Tektro compatibility: Auriga+ HD-E740 and HD-T740, Auriga Twin+ HD-E745 and HD-T745, Orion 4P HD-M745 and HD-M750, Dorado 4P HD-E725 and HD-E730, Gemini SL HD-M535 Direct replacement for the original pads

The Jagwire Sport Needle Driver insert tool for hydraulic brake hoses lets you install the insert (needle) in the disc brake hose quickly, precisely and without using a hammer. Simply lock the hose in the clamp and squeeze the handle: the insert goes in perfectly aligned, avoiding crooked inserts or damaged hoses that could compromise the system's seal and braking safety. The two-way clamp has adjustable tension and the starter pin helps set the insert before the final push. It is compatible with 5.0 and 5.5 mm hydraulic hoses and with unthreaded inserts. The textured handle offers a comfortable, secure grip: an ideal tool for the workshop and for riders who shorten or replace their own brake hoses. Main features of the Jagwire Sport Needle Driver tool Use: fitting inserts (needles) in hydraulic disc brake hoses Compatibility: 5.0 and 5.5 mm hydraulic hoses, unthreaded inserts Quick insertion by squeezing the handle, no hammer needed Two-way clamp with adjustable tension Starter pin to set the insert Textured handle for a comfortable grip