Santacruz
SANTA CRUZ RESERVE DH 29 I9 HYDRA...
€1.499,40
€2.499,00
Modern downhill tracks non suit the faint of cuore and the abuse of a day of DH racing or park laps is no joke. But we’ve got your back with the reserve DH wheels. Tested for vittoria with the Santa Cruz Syndicate on the DH Coppa del Mondo circuit, it’s the carbon wheel that delivers confidence when you need it most.
RUOTE SANTA CRUZ RESERVE DH 29 I9 HYDRA 110 BOOST 157 HG 6 FORI CARATTERISTICHE PRINCIPALI:
29” wheels
Rim material: Carbon
i9 Hydra 110 hub(s)
Weight (front/rear) 2,006 g
Santacruz
SANTA CRUZ RESERVE E-29 E-BIKE I9...
€1.079,40
€1.799,00
THE IDEAL WHEELSET FOR EBIKE ADVENTURES
Specifically designed for use on ebikes, the new 30|HD and 31|DH E-29 wheelsets by Reserve offer the perfect balance between stiffness, performance, durability and weight. These 29-inch wheels will help you maintain momentum over the toughest obstacles.
Reserve uses externally reinforced spoke holes to strengthen the area where the rim undergoes the greatest force, around the spoke nipple. This improves strength without adding unnecessary weight.
The redesigned sidewall of the 30|HD makes tubeless installation easier, with a shape that uses offset spoke holes that allow the tire to easily get over the bead bump to seat correctly.
RUOTE SANTA CRUZ RESERVE E-29 E-BIKE I9 1/1 KEY FEATURES:
Wheel size: 29.
Mozzi Industry 9 1/1.
Wheelset weight: 1,933 g (approx.).
Designed for: Trail, All Mountain, Enduro, E-Bike.
Internal width: 30.
Recommended tire size: From 2.3 to 2.6.
Number of spokes: 28.
Six-bolt disc.
Freehub body options: XDR, Microspline.
Hub spacing: Boost 15X110 F, 148X12 R.
ITEM CODE
SCS-86-23490
Santacruz
SANTA CRUZ RESERVE E-29 INDUSTRY ...
€1.079,40
€1.799,00
Specifically designed for electric mountain bikes with mixed wheels (MX), the 30|HD 31|DH E-MX wheelset by reserve offers the perfect balance between stiffness, performance, durability and weight. Combining a 30|HD front wheel with a 31|DH rear wheel, proven in the World Championship, the 29-inch front wheel offers greater traction and stability for increased safety, tackling corners decisively and aiming for inside lines, while the rear wheel provides rapid acceleration and the responsiveness needed to lift the entire bike off the ground.
reserve uses externally reinforced spoke holes to strengthen the area where the rim undergoes the greatest force, around the spoke nipple. This improves strength without adding unnecessary weight.
Redesigned rim bed: the redesigned rim bed makes tubeless installation easier, with a shape that uses offset spoke holes that allows the tire to easily overcome the bump of the bead to fit tubeless tires.
SANTA CRUZ RESERVE E-29 INDUSTRY NINE 1/1 MS CL WHEELS MAIN FEATURES:
Perfect for: Trail, all mountain and enduro e-riding.
Recommended tire size - from 2.3 to 2.6.
ITEM CODE
SCS-86-23489
Santacruz
SANTA CRUZ RESERVE HD MX I9 HYDRA...
€1.319,40
€2.199,00
Modern trail bikes are designed to handle anything. From the most relaxed singletrack to the steepest, rockiest climbs, they offer performance that encourages the rider to go faster and with greater ease. The Reserve 30|HD has been specifically designed for trail riding and for the abuse that trail bikes can undergo. It features a 30 mm width for the use of 2.5 tires and a redesigned internal rim bed that eliminates the hassle of mounting new tires.
SANTA CRUZ RESERVE HD MX I9 HYDRA SRAM XD WHEELS KEY FEATURES:
Weight: 1826 g (approximately with mozzi i9 Hydra).
Internal width: 30 mm
Number of spokes: 28.
Asymmetric offset: 4 mm.
Recommended tire width: 2.4 - 2.6 inches.
Brake rotors: centerlock.
Depth: 21 mm.
Hub spacing: 110/148 mm.
Santacruz
SANTA CRUZ RESERVE HD MX INDUSTRY...
€1.169,35
€1.799,00
Modern trail bikes are designed to tackle anything. From riding a mellow singletrack to smashing steep rocks, they offer performance that encourages the rider to go faster and with greater ease. The Reserve 30|HD has been specifically designed for trail riding and for the abuse that trail bikes are subjected to. They feature a width of 30 mm for the use of 2.5 tires and a redesigned rim interior that eliminates the hassle of mounting new tires.
MX = Mixed wheel sizes, 29" front / 27.5" rear
RUOTE SANTA CRUZ RESERVE HD MX INDUSTRY NINE 1/1 MS 6 FORI MAIN FEATURES:
Designed for: Trail, all mountain and enduro
Internal width: 30 mm
Recommended tire size: From 2.3 to 2.5
Number of spokes: 28
Rim weight: 490 and 510 g
Wheel weight: 1825 grams with Industry Nine Hydra hubs
Microspline.
6-bolt.
Santacruz
SANTA CRUZ RSV 28 XC DT SWISS 350...
€1.079,40
€1.799,00
Reserve 28|XC (DT Swiss 350) represents the highest level of performance for those who love XC racing. Weighing only 1491 g for the set with tape and valves, with no rider weight limit and a lifetime warranty, these wheels offer lightness, strength and race-ready performance. The rim profile, wider and lower than previous XC wheels, ensures greater lateral stiffness and vertical compliance, ideal both for demanding trails and World Cup circuits.
Spoke reinforcements
The spoke holes are reinforced externally in the area subject to the greatest stresses, around the nipples, increasing strength without adding unnecessary weight.
Redesigned rim
The 28|XC rim has been optimized for easier tubeless installation. The shaped profile and the offset spoke holes allow the tire to easily overcome the bead bump, making tubeless mounting easier.
Asymmetric design
The front and rear asymmetric rims make the wheels stiffer, stronger and more reliable, balancing spoke tension and improving bracing angles between the drive side and the non-drive side.
MAIN FEATURES OF SANTA CRUZ RSV 28 XC DT Swiss 350 Carbon 29 WHEELS:
Use: XC riding and racing
Internal width: 28 mm
Depth: 20 mm
Wheelset weight: 1491 g
Rim weight: 385 g
Recommended tires: 2.2 – 2.5
Spokes: 24
Hub spacing: Boost 15x110 F, 148x12 R
Sram XD - 15x110/12x148mm, Centerlock
Cassette type: XD
Santacruz
SANTA CRUZ MEGATOWER 2 CC 2025 FRAME
€2.899,00
€3.899,00
Serious fun.
The Santa Cruz Megatower, with its clearance for large 29" wheels and its long-travel, durable carbon fiber frame, offers the high-speed confidence features of a race bike. However, the relatively steep seat angle and size-specific geo maintain the Megatower's pedaling capability, elevating it to the perfect choice for big gravity rides, park laps, and enduro races.
The VPP⢠suspension can be optimized to find a balance between pedaling efficiency and the ability to handle bumps. The Megatower is exceptional at absorbing the hardest hits, so the rider can push harder, with greater confidence, even on the roughest terrain. But thanks to pedaling efficiency, climbing to the best and highest trails is not as much of a slog as with other bikes.
Frame with Fox Float X2 Factory rear shock, thru-axle and seatpost clamp.
Robust carbon frame
Santa Cruz frames are not disposable products. With regular maintenance of the bearings, they easily last a rider's entire lifetime. Carbon is not synonymous with lightness, but with durability, which is reinforced by the warranty and the crash replacement policy.
VPP suspension travel
165 mm of VPP⢠travel as standard, but if you choose to switch to a rear shock with longer stroke (65 mm) you can reach 170 mm.
Anti-squat
The low leverage ratio of the Megatower offers a feeling of greater damping and control at speed. The lower anti-squat reduces pedal-induced harshness and provides excellent absorption of square-edge bumps, offering greater leeway when taking blind risks on wild trails.
The geometry adapts
The chainstay lengths of Megatower grow with the frame sizes. So everyone gets the same balanced geometry.
TECHNICAL SPECIFICATIONS
Frame: Carbon C 29", 165mm travel, VPPâ¢
Shock: FOX Float X2 Factory, 230x62.5
Maximum tire width: 25"
Hub spacing: Boost 148mm
Brake rotor size: 200mm Post Mount
Chain guide: ISCG05
Bottom bracket: Threaded - non included
Derailleur hanger: Included
Headset bearings: IS - non included
Santacruz
SANTA CRUZ NOMAD 6 CC MX FRAME
€2.899,00
€3.899,00
Load up the van, hit the road, climb a mountain, descend at full speed, clear the jump, put the bike back in the van, drive to the bike park and do one giro after another. Heck, you could even show up at the start line of the wildest races in the mondo. The strength of the Nomad is being ready and willing to go anywhere, anytime. The only thing it needs is a rider willing to press the send button.
The Santa Cruz Nomad 6 is the ultimate mountain bike, designed for riders who want to experience the thrill of the steepest and most demanding terrain. With its cutting-edge mixed wheel setup, featuring a 27.5-inch rear wheel for agile riding and a 29-inch front wheel for unmatched stability and traction, the Nomad 6 is built to conquer any trail. With 170 mm of VPP™ travel, this bike absorbs the hardest hits while maintaining a smooth and responsive ride. Whether you are climbing mountains, descending steep trails, or tackling the wildest races, the Nomad 6 is your trusted companion, offering the perfect mix of performance and durability.
Precisely crafted, the Nomad 6 features a robust carbon CC or C frame, ensuring the same exceptional ride quality in all sizes, from S to XXL. The innovative design includes a sleek mudguard to protect the rear shock, tidy cable routing, and convenient spazio for essentials inside the down tube, making it as practical as it is powerful. With lower anti-squat for better suspension sensitivity and geometry tailored for extreme riding, the Nomad 6 stands out as the bike of choice for those who demand all the travel and capability without compromise. Ride with confidence, backed by Santa Cruz’s lifetime warranty and the support of real riders who share your passion.
SANTA CRUZ NOMAD 6 CC MX FRAME KEY FEATURES:
Carbon CC MX 170mm Travel VPP™ frame.
Shock: Fox Float X2 Factory, 230x65.
Travel: 170 mm
Wheel size: MX
Production year: 2025
Frame material: carbon CC
Santacruz
TELAIO SANTA CRUZ V10 7 CC
€2.999,25
€3.999,00
Telaio: Dimensioni ruota: 29"
Materiale telaio principale: Carbonio CC, passacavi interni / cambio preciso e senza vibrazioni e passaggio cavi di supporto vario
Morsetto sella (Ø): 31,6 mm
Santacruz
TELAIO SANTA CRUZ V10 CC 27.5
€3.074,25
€4.099,00
La Santa Cruz V10 è una delle bici di maggior successo nella storia del downhill. Questo non è un caso, ma il risultato del costante lavoro di sviluppo degli ingegneri e del team Syndicate. Non sorprende quindi che all'inizio della stagione 2017 la concorrenza sia rimasta a bocca aperta quando Loris Vergier, Luca Shaw e Greg Minnaar si sono qualificati su prototipi V10 con ruote da 29 pollici. Durante la stagione 2017 e 2018 sono stati effettuati intensi lavori di sviluppo, test e gare. Ora la Santa Cruz V10 è alla settima fase di sviluppo ed è disponibile nelle versioni 27,5 o 29 pollici per i downhill racer. Santa Cruz ha scelto consapevolmente entrambe le dimensioni delle ruote per soddisfare le preferenze personali dei rider. La V10 con ruote da 29 pollici è semplicemente più veloce e offre una trazione leggermente superiore. La V10 da 27,5 pollici è più maneggevole e più facile da accelerare. I telai sono stati sviluppati senza compromessi per la rispettiva dimensione delle ruote e non sono convertibili. Ma una cosa è certa: ogni Santa Cruz V10 è una macchina da downhill incredibilmente veloce, pronta a portarti sul podio.
TELAIO SANTA CRUZ V10 CC 27.5 CARATTERISTICHE PRINCIPALI:
CC-Carbon
Passaggio cavi interno: garantisce un look pulito e intervalli di manutenzione più lunghi.
Attacco ISCG-05 per la compatibilità con i guidacatena.
Pompa forcella integrata con passaggio cavi.
Elementi sagomati in gomma per proteggere il telaio e il fodero orizzontale.
Fodero posteriore Boost da 148 mm.
Perno passante
Geometria regolabile con impostazioni High & Low
Lunghezza foderi posteriori regolabile
Forcella
Escursione consigliata 203 mm
Sospensione posteriore / Ammortizzatore
Escursione 215 mm
Sospensione VPP: basata sul principio brevettato dei due collegamenti che ruotano in direzioni opposte. Ciò offre una grande flessibilità di progettazione e consente di adattare i rapporti dell'ammortizzatore allo scopo e al carattere previsti per il rispettivo modello.