ORBEA

Rear Derailleur Hanger Nº42 X12 Road STD The Rear Derailleur Hanger Nº42 X12 Road STD from Orbea is the small component that makes a big difference on your road bike. Designed for frames with a 12 mm thru-axle, this derailleur hanger ensures precise alignment of the rear derailleur and protects the frame in case of impacts or falls. Whether you are replacing a damaged part or simply want to have a spare ready in your workshop, this standard hanger for road derailleurs guarantees compatibility and long-distance reliability. Main features of the Rear Derailleur Hanger Nº42 X12 Road STD: Orbea rear derailleur hanger Nº42 specific for road frames Compatible with road frames equipped with X12 12 mm thru-axle Designed for standard (non-direct mount) rear derailleurs Ensures correct derailleur alignment for smooth and precise shifting Safety element that deforms on impact to protect frame and derailleur Original Orbea spare to maintain bike performance and reliability

Rear Derailleur Hanger Nº45 X12 Road STDThe Rear Derailleur Hanger Nº45 X12 Road STD by Orbea is the small component that makes a big difference in the precision of your road bike's shifting. Designed for frames with a 12 mm thru-axle, this hanger is made to perfectly replace the original, restoring derailleur alignment and smooth shifting. Ideal for those who have bent or damaged the hanger following a fall or impact, it allows you to get back on the road with the confidence of a correct installation compatible with Orbea frames that use the X12 Road standard. An essential spare to always have on hand, especially for those who travel or participate in granfondos and races.Main features of Rear Derailleur Hanger Nº45 X12 Road STD:Compatible with Orbea frames equipped with 12 mm standard X12 Road thru-axleSpecific for standard derailleurs, not compatible with direct mount attachmentsThread pitch 2P1.0 Speed Release for quick and secure mountingRestores correct rear derailleur alignment after impacts or fallsOriginal Orbea spare to guarantee compatibility and reliability over time

Rear derailleur hanger Orbea Nº48 MTB X12 STDThe Orbea Nº48 MTB X12 STD rear derailleur hanger is the component designed to restore precision and reliability to the drivetrain of your MTB with a 12 mm thru-axle. Designed for standard derailleurs (not direct mount), it is the key part that protects the frame in case of impacts and ensures correct derailleur alignment. Whether you are replacing a hanger damaged in a crash or doing preventive maintenance, this specific model ensures compatibility and clean fitting on the Orbea frames that use it, keeping shifting smooth and precise on your favourite trails.Key features:Compatible with standard rear derailleurs (not direct mount)Specific for MTB frames with 12 mm thru-axle (X12)Thread pitch 1.0Designed for Orbea frames that use the Nº48 hangerProtects the frame and keeps the derailleur correctly alignedOriginal Orbea spare part to restore precise shifting

Rear derailleur hanger Orbea Nº51 MTB QR STDThe Orbea Nº51 MTB QR STD rear derailleur hanger is the small component that makes a big difference on your mountain bike. Designed specifically for quick release (QR) frames, it ensures precise rear derailleur alignment and protects the frame in case of impacts and crashes. Whether you are replacing a damaged part or simply want a spare ready in your backpack, this hanger is the ideal solution to keep your drivetrain smooth and reliable on the trails.Key features:Compatible with Orbea quick release (QR) framesNº51 hanger for standard MTB rear derailleursPrecise derailleur alignment for smooth, accurate shiftingProtects the frame in case of impacts or crashesOriginal Orbea spare partIdeal as a replacement or as a spare for long rides

Rear Derailleur Hanger Nº54 Sram UDH X12 Concentric PivotThe Rear Derailleur Hanger Nº54 Sram UDH X12 Concentric Pivot from Orbea is the component designed for those who want to keep their derailleur always precise and reliable, both on hardtail and full suspension bikes. Designed for 12 mm rear thru-axles, this hanger uses the Sram UDH standard to offer modern compatibility and effective derailleur protection in case of impacts or falls. Available in HT and FS versions, it fits perfectly on Orbea Alma and Oiz frames, including models with the Concentric Pivot system. Thanks to the integrated washer specific to each frame type, it ensures a clean and secure installation, keeping the derailleur aligned and preserving the transmission performance. It is the ideal choice to replace a damaged hanger and restore your MTB to top functionality, with the assurance of an original Orbea component.Main features of Rear Derailleur Hanger Nº54 Sram UDH X12 Concentric Pivot:Sram UDH rear derailleur hanger specific for Orbea framesCompatible with 12 mm rear thru-axleAxle thread pitch: 1.0Includes external hanger (t) for frame mountingIncludes dropout fixing bolt (not used on all frames)HT version for Orbea Alma hardtail and Oiz full suspension non Concentric PivotFS version for Orbea MTB full suspension frames with Concentric Pivot systemSame Sram UDH hanger for both options (HT and FS), only the integrated washer differsExternal integrated washer with 30 mm diameter on FS version to cover the axle pivot bearingHT option also compatible with full suspension Concentric Pivot frames, though the washer may not fully cover the bearingIf using HT option on full suspension frames, the original external hanger can be reused if only the derailleur hanger is being replacedOriginal Orbea replacement to ensure precise derailleur alignment and optimal transmission performance

Rear Derailleur Hanger Nº54 X12 X20 STD The Orbea Rear Derailleur Hanger Nº54 X12 X20 STD is the standard derailleur hanger designed to keep the drivetrain of your 12mm thru-axle road bikes with Mahle X20 motor precise and reliable. A small component, but essential for protecting the frame and ensuring smooth gear changes: in case of impacts or falls, it is the hanger that deforms to protect the rest of the bike. Choosing the correct model is essential to preserve the original performance of your Orbea; therefore, it is important to check compatibility on your bike's Bluepaper technical manual and, if you lack mechanical experience, rely on an authorized dealer for a safe and precise installation. Main features of Rear Derailleur Hanger Nº54 X12 X20 STD: Standard derailleur hanger (non direct mount) for Orbea road models with 12mm thru-axle Compatible with frames equipped with Mahle X20 motor Designed to protect the frame by absorbing impacts and deformation in case of falls Ensures correct derailleur alignment and more precise gear changes It is recommended to use the Orbea Bluepaper technical manual to verify the correct hanger code Installation recommended at authorized dealer for safety and reliability Original Orbea spare part, ideal for maintenance and restoring drivetrain performance

The Rear Derailleur Hanger Nº47 X35 Road STD by Orbea is the small component that makes a big difference in the reliability of your bike. Designed to work in perfect harmony with Orbea frames equipped with a quick release rear wheel or Mahle Ebikemotion X35 motor, this derailleur hanger protects the frame in case of impacts and ensures precise derailleur alignment. Having a spare hanger always ready in the workshop or backpack means riding more peacefully, knowing you can quickly resolve any unforeseen issues and get back on the saddle immediately. ORBEA REAR DERAILLEUR HANGER Nº47 X35 ROAD STD main features: Original Orbea derailleur hanger, model Nº47 Compatible with Orbea frames with QR (quick release) rear wheel Compatible with bikes equipped with Mahle Ebikemotion X35 motor Ensures proper alignment of the rear derailleur Designed to protect the frame in case of impacts or falls Ideal spare part to always have available for emergencies Simple installation for quick restoration of gear functionality COMPATIBILITY: Compatible with QR rear wheel or Mahle Ebikemotion X35 motor USAGE: For road bikes MATERIAL: Aluminum (presumed)

The Rear Derailleur Hanger Nº52 X12 MTB STD by Orbea is the small component that makes a big difference on your mountain bike. Designed for frames with a 12mm thru-axle, this derailleur hanger ensures a precise alignment of the rear derailleur, protecting the frame in case of bumps or falls. Whether you are replacing a damaged hanger or simply want to always have a spare ready in your backpack, this specific model guarantees perfect compatibility with Orbea frames designed for X12 and a smooth, reliable shifting performance on your MTB rides. ORBEA DERAILLEUR HANGER N°52 X12 MTB main features: Original Orbea derailleur hanger Nº52 Compatible with Orbea MTB frames with 12mm thru-axle (X12 standard) Designed for rear derailleur on thru-axle frames Protects the frame by absorbing shocks in case of fall or impact Precise derailleur alignment for smooth and silent shifting Ideal as an emergency spare to carry on rides Robust and reliable construction for off-road use

Front derailleur hanger Orbea Nº09 road max 55TThe Orbea Nº09 front derailleur hanger is the component designed to ensure precise, reliable front derailleur operation on your road bikes. Designed for Orbea road frames, it is compatible with chainrings up to 55 teeth: check the maximum compatible chainring in your model's technical manual. To find the right spare part, you can enter your bike's frame number in the Orbea spare parts finder or consult your model's Blue Paper technical manual, where you will find the exact article code. The technical manuals for frames and components, with assembly instructions, are also available in the support section of the Orbea website.Key features:Front derailleur hanger specific for Orbea road framesCompatible with chainrings up to 55 teeth (55T)Check the maximum compatible chainring in the bike's technical manualArticle code listed in your model's Blue PaperAssembly instructions in the technical manuals in the support section of the Orbea websiteOriginal Orbea spare part

Front Derailleur Hanger Nº11 Road Up to 52TThe Front Derailleur Hanger Nº11 Road Up to 52T from Orbea is the component designed for those who want to keep their road frame always precise and reliable. Designed to work in perfect harmony with Orbea frames, it guarantees optimal alignment of the front derailleur, improving shifting quality and drivetrain durability. Ideal for replacing a worn or damaged hanger, this hanger allows you to restore your bike to its original performance, maintaining the safety and efficiency you expect from a brand like Orbea. For a correct and safe installation, it is essential to follow the specific technical instructions for your bicycle model.Main features of the Front Derailleur Hanger Nº11 Road Up to 52T:Specific front derailleur hanger for Orbea road framesCompatible with large chainrings up to 52 teeth (52T)Ensures correct alignment of the front derailleur for smoother and more precise shiftingOriginal Orbea replacement part to maintain frame performance and safetyTo be installed following the technical Bluepaper instructions of the bicycleInstallation by an authorized dealer is recommended if technical skills are lacking

Front Derailleur Hanger Nº12 Road From 53TThe Orbea Front Derailleur Hanger Nº12 Road From 53T is the component designed for those who want to keep their road frame always precise and reliable in front shifting. Designed to work with chainrings of 53 teeth or larger, it is the ideal mount to make the most of your road bike's transmission, ensuring stability and optimal alignment of the front derailleur. Before assembling, it is essential to verify the compatibility with your frame model by consulting the Bluepaper technical manual of your Orbea bike: there you will find the indications about the maximum supported chainring size and the correct assembly instructions. If you do not have the necessary technical skills, rely on an authorized dealer for installation: a professional assembly ensures perfect performance and maximum safety on the road.Main features of Front Derailleur Hanger Nº12 Road From 53T:Specific front derailleur mount for Orbea road framesCompatible with chainrings of 53 teeth or largerDesigned to guarantee precise alignment of the front derailleurTo be used only on frames that support the chainring size indicated in the Bluepaper technical manualInstallation must be carried out following Orbea's official technical instructionsInstallation at an authorized dealer recommended for safety and correct assembly

The Rear Derailleur Hanger Nº53 X12 Road STD by Orbea is the standard derailleur hanger designed for road bikes with a 12mm thru-axle. A small component, but essential for shifting precision and frame safety: in case of impact or fall, it is the hanger that deforms to protect the frame and the derailleur. Having an original Orbea replacement hanger means you can quickly get back on the saddle, maintaining the derailleur's perfect alignment and the shifting quality you expect from your road bike. Ideal to install as a spare or always carry with you on longer rides and trips. Rear Derailleur Hanger ORBEA REAR DERAILLEUR HANGER Nº53 X12 ROAD STD: Standard derailleur hanger (no direct mount) specific for Orbea road models Compatible with frames equipped with 12 mm rear thru-axle (X12) Designed to ensure precise rear derailleur alignment Safety component: deforms in case of impact to protect frame and derailleur Original Orbea spare part for maximum compatibility and reliability Recommended as a spare part to always have available during trips and races COMPATIBILITY: For road bikes with 12mm thru-axle, compatible with standard derailleurs (no direct mount) MATERIAL: Aluminum MOUNTING TYPE: Standard (no direct mount)

The Orbea Rear Derailleur Hanger Nº55 X12 Road STD is the small component that makes a big difference in shifting precision and the safety of your frame. Designed for Orbea road frames with a 12 mm thru-axle, this hanger is the ideal solution to restore derailleur alignment after a fall or impact, keeping the drivetrain smooth and quiet. Manufactured according to Orbea's original specifications, it guarantees perfect compatibility with prepared frames and standard derailleurs (non-direct mount), so you can get back to riding with the same reliability as the first day. An essential spare to always have on hand, especially if you love to travel or participate in gran fondos and races, where a spare hanger can save your ride. ORBEA REAR DERAILLEUR HANGER N°55 X12 ROAD STD main features: Original Orbea rear derailleur hanger Nº55 for road frames with a 12 mm X12 thru-axle Compatible with standard derailleurs (no direct mount) Thread pitch 2P1.0 Speed Release for proper interface with the axle Designed to ensure precise derailleur alignment and smooth shifting Specific spare for Orbea frames: check your bike’s technical Bluepaper to verify compatibility Installation by an authorized dealer is recommended if you lack the necessary technical skills Essential component to protect the frame in case of impacts or falls affecting the drivetrain DERAILLEUR COMPATIBILITY: Compatible with standard derailleurs (no direct mount) THRU-AXLE DIAMETER: 12 mm THREAD PITCH: 2P1.0 Speed Release COMPATIBLE FRAME TYPE: Road bike

Dropout Left Nº31 QR Optima 16The Dropout Left Nº31 QR Optima 16 by Orbea is the original replacement designed to restore your Optima to the performance and reliability it had when it was new. Specifically designed for Optima models from 2016 to 2019, this left dropout integrates the mount for the disc brake, ensuring precise alignment of the wheel and caliper for safe and consistent braking. By choosing an original Orbea component, you maintain the integrity of the frame geometry and the correct position of the derailleur, reducing the risk of shifting problems or abnormal wear. It is the ideal solution to replace a damaged dropout and extend the life of your Optima urban bike.Dropout Left Nº31 QR Optima 16 main features:Original Orbea left dropout for Optima 2016-2019 modelsCompatible with Optima frames equipped with disc brake mountIncludes support for disc brake caliper for precise and secure installationDesigned for wheel quick release (QR) systemsEnsures correct alignment of wheel and braking systemIdeal replacement for bent or damaged dropoutNot compatible with latest generation Optima 2019 frames

The Orbea Chainguide Kit Occam 24 is the ideal companion for those who want to make the most of their Occam frame model 2024, keeping the transmission always quiet, precise and safe. Specifically designed to integrate with the frame architecture, this kit allows you to tackle technical trails, roots, and rock gardens with the confidence that the chain will always stay in place, even on the most demanding descents. Thanks to the dedicated brackets for 30, 32 and 34 tooth chainrings, you can easily adapt the chainguide to your preferred configuration, whether you are looking for climbing agility or maximum speed on descents. To choose the correct component for your bike, you can enter the barcode in the appropriate field or consult your model's Blue Paper technical manual and use the article code. In the support section of the Orbea website you will also find technical manuals with all the assembly instructions, so you can carry out a precise and safe installation. Chainguide Kit Occam 24 main features: Specific chainguide for Orbea Occam frames starting from the 2024 model Includes dedicated brackets for 30, 32 and 34 tooth chainrings Optimized compatibility with chainring diameter thanks to interchangeable brackets Designed to improve chain retention on the most technical trails Ideal solution to reduce chain drops, noise and shocks on the transmission Selection of the correct component through barcode or model Blue Paper technical manual Detailed assembly instructions available in the support section of the Orbea website Clean and aesthetic integration with the Occam frame design COMPATIBILITY: Compatible with Occam frames from 2024 CHAINRING COMPATIBILITY: Brackets for 30T, 32T, 34T