Ohlins

OHLINS TTX 22 M.2 230X65 AM SHOCK ABSORBER The OHLINS TTX 22 M.2 230X65 AM SHOCK ABSORBER offers high performance, control, traction and is perfetto for gravity. The TTX22m.2 improves bottom-out performance, thanks to the new rubber cap design, and the lower part of the della sella. This significantly improves control at mid and fine stroke, thanks to a quicker, more precise and reliable start. OHLINS TTX 22 M.2 230X65 AM SHOCK ABSORBER MAIN FEATURES: Size: 230x65 mm. Use: Trail and Downhill. Possibility to simply adjust the stroke with the three 2.5 mm spacers included in the package. Suitable for light springs with 4 Nm/23 lb increments. External high-speed compression adjustment with three levels. External low-speed compression adjustment with 16 clicks. External rebound adjustment with 7 clicks. Weight: 486 g (for a 205x65 Trunnion shock absorber). ITEM CODE MTBM 2208

OHLINS TTX 22M SHOCK - SJ 27.5 AM Revolutionary shock absorber that uses the exclusive Öhlins TTX twin tube technology that keeps compression separate from rebound, extensively tested in the motorbike sector and now applied to this shock with exceptional performance.It improves ride quality by increasing stability, bump absorption and delivering excellent traction at every point of the route, with a noticeable gain both on the straight and in corners, where the cornering speed increases significantly.Adjustable in compression and rebound at high and low speeds, it is also equipped with spherical bearings that allow the suspension to move while the bicycle is subjected to lateral torsion. OHLINS TTX 22M SHOCK - SJ 27.5 AM MAIN FEATURES: High speed: 3 clicks. Low speed: 16 clicks. Rebound adjustment: 7 clicks. ITEM CODE SBC 1979

OHLINS AM RFX34 M2 AIR OTX18 29 44-130 FORK Medium-travel fork perfect for trail ride and downcountry, and to tackle even the most challenging tracks with total peace of mind. The fork can be easily adjusted: 15 clicks for low-speed compression and rebound adjustment. Three settings for high-speed compression. Optimal balance between traction, weight control (1698 g) and stiffness (it can also be mounted on e-bikes). The new fork replaces the original RXF34 and offers 130 mm of travel optimized for lightweight 29er trail bikes. With a weight of only 1698 g, the fork vanta a brand-new air spring and shock, adapted to the needs of the emerging riding style, while maintaining all the tratti that distinguish Öhlins’ high-performance, race-proven suspension, like its long-travel single-crown cousins RXF36 m.2 and RXF38 m.2. The OTX18 damper is specifically designed for downcountry and was born from the great success of the TTX18 featured in Öhlins downhill and trail forks. It shares several key components with its bigger brother TTX18, but weighs 27% less and is optimized for faster, smoother trail riding, finding an optimal balance between traction, control, weight and stiffness. Like all Öhlins dampers, the OTX18 offers impressive adjustability for fine tuning, with fifteen clicks for low-speed compression and rebound adjustment and three for high-speed compression adjustment. The new damper is paired with a robust yet lightweight air spring, equipped with a positive chamber and a self-adjusting negative chamber. The positive chamber allows you to adjust the spring curve according to your needs using the Öhlins volume spacer system. The negative chamber, on the other hand, is designed for fast trail riding and provides a soft initial feel and superb small-bump sensitivity. The surface and seals of the spring also minimize friction and breakaway force to improve the fork’s smooth feel. The fork chassis is very stiff and offers precise steering, and all this has been made possible thanks to a closed outer-tube design to increase stiffness, impact resistance and the volume of the lower legs. The increased air volume in the lower part of the fork enhances the effect of the air spring on overall performance. The RXF34 m.2 also benefits from the same race-proven floating axle design found on the RXF36 m.2 and RXF38 m.2, which reduces friction and further increases stiffness. OHLINS AM RFX34 M2 AIR OTX18 29 44-130 FORK KEY FEATURES: - OTX18 damper optimized for trail. - 34 mm stanchions. - 29" wheels. - 44 mm offset. - 130 mm travel. - Floating axle design to minimize friction. - eMTB approved. - Brake rotor sizes: 160 mm, max 203 mm. - Maximum tire size: 29 x 2.6. - Weight 1698 g without spacers. - Axle to corona 541 mm @ 130 mm travel. ITEM CODE FGMTB 3413 2230

OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK The proven TTX 18 shock from the DH38 Race fork has been revised to offer even more traction and control on Enduro trails. The TTX 18 cartridge kit includes an 18 mm piston optimized for trail riding to improve small bump sensitivity.The adjustment system is specific for Trail and Enduro racing and provides 15 clicks for low-speed compression and low-speed rebound. For high-speed compression there are 3 clicks plus a climb mode setting. Three-chamber dual-piston air spring system, which allows full adjustment of the air springs from the initial movement all the way to the end of the travel.The fork can accommodate 29×2.8 tires. OHLINS AM RXF38 M2 AIR TTX18 29 44/170 FORK MAIN FEATURES: TTX technology. Travel: 170 mm. Diameter: 38 mm. Offset: 44 mm. Compatibility with 29x2.8 tires. Race-proven adjustment system. General improvements to reduce friction. ITEM CODE FGMTB 3817 2210

OHLINS SKF SEALS AND DUST WIPERS KIT FOR 38MM FORK Riding experience and durability are two decisive factors in the design of bicycle fork seals. For off-road applications in particular, such as those in the xc, enduro or downhill categories, the requirements for the seals are very demanding. These seals are developed to ensure low friction during operation and maximum contact with the ground for an optimal riding feel. SKF seal kits for mountain bike forks are made with the same self-lubricating compound developed to achieve superior sealing performance in motorcycle applications. OHLINS SKF SEALS AND DUST WIPERS KIT FOR 38MM FORK MAIN FEATURES: Significantly optimized riding comfort. Extended service life and improved performance. Better protection against water and contaminants. Reduced wear and air suction. Compatibility with a wide gamma of fork oli for original equipment and aftermarket. Capacità to withstand UV rays. NBR elastomer specifically formulated for reduced and consistent friction. Double-lip scraper for heavily contaminated environments. 2x SKF sealing gaskets. 2x pre-impregnated foam rings. Weight (approx.): 34g. ITEM CODE MTB38OHL

OHLINS SPARE KIT FOR DH38 FORK Service kit for Ohlins DH38 forks. ITEM CODE 19237-01

OHLINS SPARE PARTS KIT FOR RXF36 FORK Spare parts kit for Ohlins RFX36 fork. INCLUDES: 4 damper bumpers 2x foam rings 2x wiper seals 1x O-ring (as SAG indicator) ITEM CODE 18880-07

ÖHLINS SPRING 36/106 N/MM 605LB FOR Specialized Turbo Kenevo Light spring for Öhlins MTB TTX 22 M and universal TTX 22 M shock absorbers available in 4 N / mm steps (the 457 lb weighs 290 g, quasi like a titanium spring) and have a maximum tolerance of 1.5%.The light springs of the 18074-05 bis -15 series are designed for the universal hydraulic TTX 22 M shock absorber with item no. MTB 1691 and MTBM 1895. ÖHLINS SPRING 36/106 N/MM 605LB FOR Specialized Turbo Kenevo MAIN FEATURES: Weight: between 241 and 360 %u200B%u200Bg. Diameter: 36 mm. Length: 111-120 mm. Spring rate: 80 N / mm. Stroke: 63.5 mm. Material: steel, powder-coated. Maximum deflection (allowable deflection): 63 mm. Color: yellow. Indicative table to choose the correct spring for your Specialized Turbo Kenevo: Code pounds Rider weight 18074-08 411 from 60 to 65 kg 18074-09 434 from 65 to 70 kg 18074-10 457 from 70 to 75 kg 18074-11 480 from 75 to 80 kg 18074-12 502 from 80 to 85 kg 18074-13 525 from 85 to 90 kg 18074-14 548 from 90 to 95 kg 18074-15 571 from 95 to 100 kg 18074-16 605 >100 kg COD. ART. 18074-16

OHLINS SPRING 36/113/106 N/MM 605 LB/IN 57 MM Spring of ultima generation that combines race weights and mountain resistance. State-of-the-art heat treatments and advanced materials allow the spring coils to be stressed without damaging them, which means that they are even stronger and lighter than prima. ITEM CODE 18075-16

OHLINS SPRING 18075 36/113/112 N/MM 640 LB/IN 57 MM The coil springs for the Öhlins MTB TTX22M shocks have a race-ready weight and big-mountain durability. The careful selection of materials and advanced production technology, which includes a multi-fasi surface treatment process as well as heat treatments and cutting-edge wire materials, allow the wire to be stressed more heavily without causing damage to the spring and therefore to design lighter springs.Spring designed for hydraulic shocks: MTB 1496 MTB 1497 MTB 1498 MTB 1696 MTB 1697 MTB 1698 MTBM 1892 MTBM 1893 MTBM 1972 MTBM 1973 MTBM 1975 TECHNICAL SPECIFICATIONS: Weight: 650 - 850 g. Diameter: 36 mm (1.42"). Stroke: 57 mm (2.25"). Material: steel, powder-coated. ITEM CODE 18075-17

OHLINS SPRING 18075 36/113/68 N/MM 388 LB/IN 57 MM Ohlins spring of ultima generation that combines race weights with mountain durability. Cutting-edge heat treatments and advanced materials allow the spring coils to be stressed without damaging them. The spring is therefore even lighter and more durable than prima. ITEM CODE 18075-07

OHLINS SPRING 18075 36/130 N/MM 741 LB/IN 57 MM New generation Ohlins spring that combines race weights with the resistance of the big mountains. Cutting-edge heat treatments and advanced materials allow the spring coils to be stressed without damaging them: the springs can therefore be even stronger and lighter than before. ITEM CODE 18075-20

OHLINS SPRING 18075 36/88 502 LB 67 MM 18077 Ohlins spring for Ohlins TTX shock absorber for Specialized Turbo Kenevo. Replaces the 18074 spring. 502 pounds and rider weight from 80 to 85 kg. ITEM CODE 18077-12

OHLINS SPRING 18075 FOR TTX 36/113 SHOCK 92 NM 525LB/IN 57MM Ohlins springs for TTX 22M shock. Lighter than previous versions. ITEM CODE 18075-13

OHLINS SPRING 36/72 (411 67MM) 18077 FOR SPECIALIZED TURBO KENEVO Ohlins 18077 spring for Ohlins TTX shock absorber for Specialized Turbo Kenevo. Replaces the 18074 spring. The Ohlins spring for TTX shock absorber, compared to the previous one, is lighter. 441 pounds and maximum rider weight supported 60-65 kg. ITEM CODE 18077-08

OHLINS 36/80 (457 67MM) SPRING FOR SPECIALIZED TURBO KENEVO Spring for Ohlins TTX shock absorber for Specialized Turbo Kenevo. Replaces spring 18074. Compatible with Turbo Kenevo from 2018 to 2020. 480 lbs and maximum supported rider weight 70-75 kg. ITEM CODE 18077-10

OHLINS SPRING 18077 FOR SPECIALIZED 36/118 N/MM 674 LB/IN 67MM Ohlins 18077 spring for Ohlins TTX shock for Specialized Turbo Kenevo. The 18077 spring replaces the 18074 spring. Pounds 674. Maximum supported weight: 110 kg. ITEM CODE 18077-18

OHLINS SPRING 36/113/80 FOR TTX 18075 457LB 57MM FOR TTX 18075 Ohlins springs for TTX 22M shock absorber, lighter than the previous version. ITEM CODE 18075-10

OHLINS SPRING 36/113/84 (480 LB/IN) 57MM Ohlins springs for TTX 22M shock absorber, lighter than the previous version. ITEM CODE 18075-11