-37% sale
PARK TOOL ROTOR TRUING GAUGE PARK TOOL DT-3 €49,90 €79,00
The Park Tool DT-3 is the rotor truing gauge that bolts onto Park Tool professional truing stands and lets you check rotor straightness with the wheel already mounted in the stand. As Park Tool points out, rotors can warp from extensive use, excessive heat or impact, and even a new rotor may not be perfectly straight: the result is pad rub and reduced braking performance. The DT-3 bolts to the truing stand and carries a finely threaded indicator that is infinitely adjustable and locks in position. Bring the tip close to the rotor, spin the wheel and pinpoint exactly where the rotor moves away from or towards the indicator. The gauge is designed not to mar the braking surface and works with rotors of any size. Wheel truing and rotor checking happen at the same station, without removing the wheel and without extra equipment on the bench: find the spot to correct, work on the rotor and check the result straight away. Where to use the Park Tool DT-3 rotor gauge Checking rotors after a crash, an impact or heavy use with severe overheating. Inspecting new rotors before final installation. Tracking down the cause of pad rub or brake noise. Working alongside wheel truing, without moving the wheel from the stand. Fitting to Park Tool TS-2, TS-2.2, TS-2.2P, TS-2.3, TS-4, TS-4.2 and TS-4.3 truing stands. Why choose Park Tool DT-3 Measures rotor straightness with the wheel mounted in the truing stand. Finely threaded indicator with infinite adjustment and locking. Does not damage the rotor braking surface. Compatible with disc brake rotors of any size. Can be completed with the DT-3i.2 dial indicator for a numerical runout reading. For a workshop that works on disc brakes every day, the Park Tool DT-3 rotor truing gauge turns the truing stand into a complete rotor inspection station. It pays for itself in time saved on every noise and rub diagnosis, and lets you hand back to the customer a braking system checked with method. TECHNICAL SPECIFICATIONS GeneralCode: DT-3Brand: Park ToolType: rotor truing gauge for truing standsIndicator: finely threaded, infinitely adjustable and locking CompatibilityTruing stands: Park Tool TS-2, TS-2.2, TS-2.2P, TS-2.3, TS-4, TS-4.2, TS-4.3Rotors: disc brake rotors of any sizeOptional accessory: DT-3i.2 dial indicator
-38% sale
PARK TOOL DERAILLEUR SCREWDRIVER FLAT BLADE... €30,90 €49,20
The Park Tool DSD-4 is the 5 mm flat-blade screwdriver dedicated to derailleur adjustment. The blade of the Park Tool DSD-4 derailleur screwdriver is precision-ground to fill the slot of adjustment and limit screws properly and transfer rotation without slipping. Slotted adjustment screws are small, and a worn or wrong-sized blade tends to cam out of the slot and mark it. With a properly sized 5 mm blade, the DSD-4 seats fully and allows precise adjustments, even of just a few degrees. The ergonomic 6061 aluminium handle, CNC machined and hard anodized, gives a solid grip, and the 145 mm shaft reaches the screws on front and rear derailleurs without interfering with the frame. Where to use the Park Tool DSD-4 screwdriver Slotted limit screws on rear derailleurs.Slotted limit screws on front derailleurs.Slotted adjustment screws on other drivetrain components.Slotted screws that fit a 5 mm blade. Why choose Park Tool DSD-4 5 mm flat blade, precision-ground for an accurate fit.Full contact in the slot reduces the risk of slipping and damaging the screw.Fine, repeatable adjustments while tuning your shifting.CNC machined, anodized 6061 aluminium handle, built to last.The ideal partner to the DSD-2 #2 cross tip to cover the most common adjustment screws. For anyone who wants a dedicated flat-blade screwdriver for shifting, precise and built for the workshop, the Park Tool DSD-4 5 mm flat-blade derailleur screwdriver is the right choice. TECHNICAL SPECIFICATIONS GeneralItem code: DSD-4Tip: 5 mm precision-ground flat bladeTotal length: 232 mmShaft length: 145 mmWeight: 124 g MaterialsHandle: CNC machined 6061 aluminium, hard anodized, ergonomic shape
-37% sale
PARK TOOL TABLETOP DIGITAL SCALE 3 KG PARK ... €33,90 €53,50
The Park Tool DS-2.2 is a highly accurate tabletop digital scale designed for weighing small parts, spares and bicycle components right on the workshop bench. With a 3000 g capacity and 0.1 g resolution, this tabletop digital scale covers most bicycle components, from the smallest parts to the heavier pieces. Operation is straightforward: place the part on the 100 x 100 mm weighing surface and read the value on the backlit screen, which shows the weight in both grams and ounces. The tare button offsets the weight of a container, so you weigh only what is inside it. Park Tool includes two parts trays, ideal for spoke nipples or ball bearings, plus the two AAA batteries. The compact platform is handy for bolts, cranksets, derailleurs, cassettes and all the small hardware usually weighed in a workshop, while the fine resolution makes it useful for comparing parts of very similar weight. How to use the Park Tool DS-2.2 tabletop digital scale Weigh components before and after a build to keep track of the overall bike weight. Compare different spare parts with a reading to a tenth of a gram. Weigh loose small parts such as nipples or bearings using the included trays and the tare function. Switch between grams and ounces depending on the figure you need. Work even in poorly lit areas thanks to the backlit display. Check the weight of incoming spare parts or items to be catalogued in stock. Why choose Park Tool DS-2.2 Accuracy stated by Park Tool of 1 g per 1000 g, 2000 g and 3000 g. Resolution of 0.1 g or 0.01 oz, suitable even for the lightest parts. Maximum capacity of 3000 g (106 oz) in a compact tabletop format. Tare button to exclude the weight of trays and containers. Two parts trays and batteries included: ready to use straight out of the box. For anyone building custom bikes, tracking the weight of every component or managing a workshop's parts stock, the Park Tool DS-2.2 tabletop digital scale is a simple, reliable tool to keep on the workbench at all times. Its compact size fits even on crowded benches, while the dual reading in grams and ounces makes it easy to compare against any spec sheet. TECHNICAL SPECIFICATIONS GeneralCode: DS-2.2Brand: Park ToolType: tabletop digital scaleAccuracy: 1 g/1000 g, 1 g/2000 g, 1 g/3000 gResolution: 0.1 g | 0.01 ozMaximum capacity: 3000 g | 106 ozUnits: grams and ouncesDisplay: backlitFunctions: tarePower: 2 AAA batteries (included) DimensionsWeighing surface: 100 x 100 mm (4" x 4") ContentsDS-2.2 digital scale2 parts trays2 AAA batteries
-37% sale
PARK TOOL WORKSHOP DUMMY HUB PARK TOOL DH-1 €16,90 €26,50
The Park Tool DH-1 workshop dummy hub slides into the rear dropouts in place of the wheel and keeps the chain in place while the wheel is off. It is not a hub for building wheels: it is a workshop tool that makes cleaning, servicing, transporting and storing the bike easier. With the DH-1 installed you can pedal and shift gears even without the rear wheel. The chain stays where it belongs instead of dropping onto the frame, and the drivetrain can spin freely: ideal for a thorough chain clean or for tracking down a drivetrain problem. It fits both quick-release frames and 12 mm thru-axle frames. When you need the DH-1 workshop dummy hub Chain cleaning: the drivetrain turns and you can work on chain and sprockets without the wheel in the way. Drivetrain diagnosis: pedalling and shifting with the wheel removed makes it easier to find where a problem starts. Transport: with the rear wheel removed, the chain stays in position. Storage: the bike can be stored without its wheel while keeping the chain tidy. Why choose Park Tool DH-1 Compatible with all multi-speed chains and 1/8" chains. Fits quick-release and 12 mm thru-axle frames. Lets you pedal and shift without the rear wheel. Installs and removes like a wheel, directly in the dropouts. For anyone who washes the bike often or transports it with the wheel off, the Park Tool DH-1 workshop dummy hub is a small tool that saves time and keeps chain and drivetrain in order. TECHNICAL SPECIFICATIONS GeneralCode: DH-1Brand: Park ToolType: workshop dummy hub (not a hub for wheels)Use: cleaning, servicing, transport and storage CompatibilityChains: all multi-speed and 1/8"Frames: quick-release and 12 mm thru-axle
-36% sale
PARK TOOL ALUMINIUM DERAILLEUR HANGER ALIGN... €124,90 €194,90
The Park Tool DAG-3 is the all-new derailleur hanger alignment gauge, engineered to be light, accurate and versatile. An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problems. The long, precision-extruded aluminium body is built to tight tolerances and provides ample leverage for making adjustments. The sliding indicator measures alignment against rims of any size and rotates out of the way to clear seat stays, racks and other obstacles, allowing 360° measurement. The M10 threaded tip is replaceable and the gauge also fits low-clearance thru-axle hangers and Shimano Direct Mount hangers. How to align a derailleur hanger with the DAG-3 Mount the bike in a repair stand with the wheels level and check that the rear wheel is properly seated in the frame. Remove the rear derailleur and thread the gauge onto the hanger; if the threads are damaged, chase them first with the Park Tool TAP-10. Set the indicator against the rim at 3 o'clock, then rotate gauge and valve to 9 o'clock: with a gap under 3 mm the hanger is horizontally aligned. If the gap exceeds 3 mm, bend the hanger by half the gap, in small increments, rechecking both sides. Repeat the vertical check between 6 and 12 o'clock: the hanger is aligned when three points 90° apart are all within 3 mm. If fenders, racks or stays get in the way, simply pivot the indicator to clear the obstacle. Why choose Park Tool DAG-3 Extruded aluminium body: 645 g for a length of 420 mm Sliding, rotating indicator for 360° measurement even with racks and fenders Compatible with 16" to 29"+ wheels (ISO/ETRTO rims 317 to 630+) Replaceable M10 threaded tip Fits low-clearance thru-axle and Shimano Direct Mount hangers After alignment always recheck the limit screws and derailleur indexing; a hanger bent several times that fails during correction must be replaced. For a light and complete tool, the Park Tool DAG-3 aluminium derailleur hanger alignment gauge is the most advanced choice. TECHNICAL SPECIFICATIONS GeneralCode: DAG-3Brand: Park ToolType: derailleur hanger alignment gaugeTip: M10 threaded, replaceable DimensionsLength: 420 mm (16.5")Weight: 645 g MaterialsBody: precision-extruded aluminium CompatibilityWheels: 16" to 29"+ (ISO/ETRTO 317 to 630+)Hangers: low-clearance thru-axle, Shimano Direct Mount
-37% sale
PARK TOOL WORKSHOP DERAILLEUR HANGER ALIGNM... €79,90 €125,70
The Park Tool DAG-2.2 is the workshop derailleur hanger alignment gauge: it measures hanger misalignment and lets you straighten it, helping to diagnose and solve many shifting problems. A misaligned hanger causes skipping, missed shifts and wreaks havoc on the whole drivetrain. The gauge threads onto the hanger in place of the rear derailleur and uses the wheel rim as a reference: the indicator is set against the rim at one point and compared at the opposite position, so the measured gap shows how far the hanger is out of line. It adjusts for 16" to 29"+ wheels and fits most frame/hanger combinations, including low-clearance thru-axle hangers. How to align a derailleur hanger with the DAG-2.2 Mount the bike in a repair stand with the wheels level and check that the rear wheel is properly seated in the frame. Remove the rear derailleur and thread the gauge onto the hanger; if the threads are damaged, chase them first with the Park Tool TAP-10. Set the indicator against the rim at 3 o'clock, then rotate gauge and valve to 9 o'clock: with a gap under 3 mm the hanger is horizontally aligned. If the gap exceeds 3 mm, bend the hanger by half the gap, in small increments, rechecking both sides. Repeat the vertical check between 6 and 12 o'clock: the hanger is aligned when three points 90° apart are all within 3 mm. If fenders, racks or stays block the indicator, use the O-rings as markers and slide the indicator back to clear the obstacle. Why choose Park Tool DAG-2.2 Compatible with virtually all derailleur-equipped bicycles Adjustable for 16" to 29"+ wheels (ISO/ETRTO rims 317 to 630+) Also fits low-clearance thru-axle hangers 405 mm workshop tool for repeatable measurements on every bike After alignment always recheck the limit screws and derailleur indexing; a hanger bent several times that fails during correction must be replaced. To diagnose and correct bent hangers reliably, the Park Tool DAG-2.2 derailleur hanger alignment gauge is the reference tool. TECHNICAL SPECIFICATIONS GeneralCode: DAG-2.2Brand: Park ToolType: derailleur hanger alignment gauge DimensionsLength: 405 mm (16")Weight: 937 g CompatibilityWheels: 16" to 29"+ (ISO/ETRTO 317 to 630+)Hangers: most frame/hanger combinations, including low-clearance thru-axle hangersBikes: virtually all derailleur-equipped bicycles
-39% sale
PARK TOOL COMPACT UNIVERSAL CRANK PULLER PA... €12,90 €21,11
The Park Tool CWP-7 is a compact, universal wrench-driven crank puller for removing crank arms from virtually all three-piece crank systems. It works on both square taper and splined crank arms, thanks to two interchangeable swivel feet. The principle is simple: the puller threads into the M22 x 1.0 extractor threads of the crank arm and the rotating tip, driven by the threaded shaft, presses against the bottom bracket spindle until the arm comes off. The extra-fine threads of the shaft provide the leverage needed even on the tightest cranks. An adjustable wrench is required to operate it. How to use the CWP-7 crank puller Unscrew the crank bolt or nut counterclockwise; if present, first remove the dust cap and any washer under the bolt. Choose the foot: the small one for M8 bolts, the large one for M12 or M15 bolts. Back out the driving shaft until it is recessed in the tool's hex fitting, so the 22 mm thread can fully engage the crank arm. Thread the puller fully into the crank arm without cross-threading: partial engagement can damage the crank threads. Turn the shaft clockwise until it contacts the bottom bracket spindle and continue until the crank arm comes off, then repeat on the other side. Why choose Park Tool CWP-7 One tool for square taper and the main splined standards: Shimano Octalink, ISIS Drive, ISIS Overdrive and SRAM PowerSpline Small foot also compatible with BNI crank arms for Bosch e-bike systems Interchangeable rotating tip that pushes the crank arm off the spindle Extra-fine threads for leverage even on stuck crank arms Compact format, handy on the workbench and in the toolbox Note: some fitness equipment crank arms use nonstandard extractor threads, so check with the equipment manufacturer. To remove three-piece cranksets cleanly and safely, the Park Tool CWP-7 compact universal crank puller is the reference tool. TECHNICAL SPECIFICATIONS GeneralCode: CWP-7Brand: Park ToolType: wrench-driven universal crank pullerOperation: adjustable wrench CompatibilityCrank extractor thread: M22 x 1.0Small foot: M8 x 1.0 bolts (square taper, SRAM PowerSpline, BNI cranks for Bosch e-bikes)Large foot: M12 x 1.0 or M15 x 1.0 bolts (Shimano Octalink, ISIS Drive, ISIS Overdrive)Not compatible: crank arms with nonstandard extractor threads (some fitness equipment) ContentsSwivel feet: 2 (small and large)
-31% sale
PARK TOOL REPLACEMENT CHAIN TOOL PINS PARK ... €3,90 €5,60
The Park Tool CTP-C is a pack of two CTP replacement chain tool pins, compatible with most Park Tool chain tools: CT-1, CT-2, CT-3, CT-3.2, CT-3.3, CT-5 and CT-7. Two pins in one pack means one to fit right away and one spare. The pins are made of hardened alloy tool steel and are the part that pushes the chain rivet when opening and closing the chain. When the pin wears out, simply replace it to make your chain tool precise again: installation is done with a 7 mm or 9/32" box end wrench. Chain tools compatible with CTP-C pins CT-1 and CT-3 chain tools CT-2 plier-type chain tool CT-3.2 and CT-3.3 chain tools CT-5 mini chain tool CT-7 screw-type chain tool for 1/8" and 3/16" chains Why choose Park Tool CTP-C Two genuine Park Tool CTP pins in the same pack Hardened alloy tool steel built for workshop use Quick replacement with a simple 7 mm wrench One spare part for most Park Tool chain tools For CT-4, CT-4.2, CT-4.3 and CT-11 chain tools you need the CTP-4K kit instead. For all the other models listed, Park Tool CTP-C replacement chain tool pins are the ideal spares to keep on the bench. TECHNICAL SPECIFICATIONS GeneralCode: CTP-CBrand: Park ToolType: replacement chain tool pinsInstallation: 7 mm or 9/32" box end wrench MaterialsPin: hardened alloy tool steel CompatibilityChain tools: CT-1, CT-2, CT-3, CT-3.2, CT-3.3, CT-5, CT-7 ContentsCTP pins: 2
-37% sale
PARK TOOL SHOP CHAIN TOOL SINGLE-SPEED AND ... €39,90 €62,40
The Park Tool CT-3.3 is the shop-quality chain tool for removing and installing chain rivets, the operation behind every chain sizing and replacement. It is compatible with virtually all single-speed and multi-speed chains, from 5 up to 12 speeds. The body is investment-cast steel, strong and precise, paired with a comfortable handle that lets you control the force on the pin. The floating locating shelf adapts to any chain width, so the driving pin always works centered on the rivet. The driving pin is replaceable: when it wears, fit the Park Tool CTP replacement and the tool is as good as new. CT-3.3 chain tool compatibility 1/8", 3/16" and half-link single-speed chains 5- to 12-speed derailleur chains SRAM T-Type and SRAM Flattop Shimano XTR 12-speed Campagnolo 11-, 12- and 13-speed chains: installs and removes rivets, but cannot peen them A chain tool is needed every time a chain has to be sized, replaced or opened: from the new bike to be prepared to the worn chain to be changed during a service. Having a tool with a floating shelf and a rigid body on the bench means working with the pin always in line and reducing the risk of crooked rivets, on modern drivetrains as well as on the single-speed chains of urban and fixed-gear bikes. How to get the best from it Before use, check that the driving pin is tight in the handle Seat the chain on the floating shelf, not above or below it Keep the pin straight and centered on the rivet while driving it Periodically grease the handle threads Why choose Park Tool CT-3.3 Shop-quality chain tool, suited to everyday work Investment-cast steel body for strength and precision Floating shelf compatible with any chain width Driving pin replaceable with the Park Tool CTP spare Comfortable handle to control the force on the pin precisely Ideal for shortening new chains and replacing worn ones For anyone looking for a reliable bench tool to handle chains from single-speed to 12-speed, the Park Tool CT-3.3 chain tool is a solid, proven choice. TECHNICAL SPECIFICATIONS GeneralCode: CT-3.3Type: shop chain toolReplacement driving pin: Park Tool CTP MaterialsBody: investment-cast steel CompatibilitySingle-speed: 1/8", 3/16" and half-link chainsDerailleur chains: 5 to 12 speeds, including SRAM T-Type, SRAM Flattop and Shimano XTR 12-speedCampagnolo 11, 12 and 13-speed: rivet installation and removal, peening not possible
-38% sale
PARK TOOL CLAMPING SPOKE HOLDER FOR ROUND A... €29,90 €48,00
The Park Tool CSH-1 is the clamping spoke holder that keeps the spoke still while you adjust its tension. During truing and wheel building it prevents round and bladed spokes from winding up and straight-pull spokes from rotating, so every turn of the nipple really becomes tension. The tool is made of forged, heat-treated steel, with dual-density grips for a comfortable hold even during long work sessions. The head can grip the spoke in several positions: you can choose the angle that gives the best leverage and the most comfortable hand position for the space available on the wheel. How the CSH-1 clamping spoke holder works It closes on the spoke like pliers and keeps it locked while you adjust the nipple On round and bladed spokes it prevents the twist that would distort tension and truing On straight-pull spokes it stops the spoke from rotating The head accepts the spoke in several positions to suit every area of the wheel Works on round and bladed spokes 2.3 mm (13 gauge) wide or less Compatible with both J-bend and straight-pull spokes A spoke that winds up is one of the most common problems in truing: the wheel looks straight, but as soon as it is ridden the twist releases and the wheel goes out of true again. With the spoke held by the CSH-1 the adjustment stays stable and the work is repeatable, both on new wheels to build and in maintenance. Why choose Park Tool CSH-1 Forged, heat-treated steel body, built for workshop use Dual-density grips for comfort and control One tool for round and bladed, J-bend and straight-pull spokes Head with several gripping positions for better leverage Dedicated Park Tool 2230K rebuild kit available as a spare The CSH-1 works alongside the spoke wrench: one hand holds the spoke, the other adjusts the nipple, so you can watch the spoke's behavior directly as tension increases. For precise truing without wound-up spokes, the Park Tool CSH-1 clamping spoke holder is the ideal companion to the spoke wrench on every mechanic's bench. TECHNICAL SPECIFICATIONS GeneralCode: CSH-1Type: clamping spoke holderRebuild kit: Park Tool 2230K MaterialsBody: forged, heat-treated steelGrips: dual-density CompatibilitySpokes: round and bladed, 2.3 mm (13 gauge) wide or lessSpoke type: J-bend and straight-pull
-41% sale
PARK TOOL CARBON CUTTING HACKSAW BLADE PARK... €7,90 €13,20
The Park Tool CSB-1 is a hacksaw blade dedicated to cutting carbon: a replacement part designed for accurately shortening carbon fiber handlebars, fork steerers, seatposts and seat masts. Its fine-grit tungsten carbide coating is designed to deliver a clean, precise cut. The cutting surface is coated with tungsten carbide, a solution designed specifically for composites. For this reason the blade is intended for carbon fiber only: used on aluminum or steel it wears out prematurely. Where to use the CSB-1 carbon blade Cutting carbon handlebars to length Shortening carbon fork steerer tubes Cutting seatposts and integrated seat masts Fits the Park Tool SAW-1 hacksaw or most standard 12" hacksaws Guided cutting with Park Tool SG-8 or SG-7.2 saw guides Why choose Park Tool CSB-1 Fine-grit tungsten carbide coating, specific for composites Clean, precise cuts on carbon components Compatible with the SAW-1 hacksaw and standard 12" hacksaws Designed to work together with Park Tool saw guides For anyone building and adjusting carbon bikes, the Park Tool CSB-1 hacksaw blade is the right spare to always keep at the bench. TECHNICAL SPECIFICATIONS GeneralCode: CSB-1Type: hacksaw blade for cutting carbonUse: carbon fiber only (wears prematurely on aluminum or steel) MaterialsCutting surface: fine-grit tungsten carbide coating CompatibilityHacksaws: Park Tool SAW-1 and most standard 12" hacksawsSaw guides: Park Tool SG-8 or SG-7.2Components: carbon handlebars, forks, seatposts and seat masts
-36% sale
PARK TOOL ADJUSTABLE CROWN RACE PULLER PARK... €359,90 €559,90
The Park Tool CRP-2 is the adjustable puller for removing the headset crown race from its seat on the fork crown. It is fully adjustable and allows precise, independent positioning of the blades around the race, so it works on rigid and suspension forks with steering columns from 1" to 1.5". The independent blades fit around fork top caps and crown protrusions, so the tool can grip under the race even on forks with more complex shapes. It accepts crown races with an outside diameter up to 64 mm and steering columns from 140 to 430 mm long. The all-steel construction is built to last. The blades are thin to slip under the race and wear with use, especially on tightly pressed races: Park Tool supplies them as a replacement part under code 1155-3. Where to use the CRP-2 crown race puller Removing the crown race from its seat on the fork crown Steering columns of 1", 1-1/8", 1-1/4" and 1.5" Suspension forks and rigid forks Crown races with an outside diameter up to 64 mm Steering columns from 140 to 430 mm long Forks with top caps or crown protrusions Why choose the Park Tool CRP-2 Full adjustment with precise, independent blade positioning One tool for four steering column diameters Thin blades that get under the race even where space is tight All-steel construction for long professional use Replacement blades available as part 1155-3 For the workshop that replaces headsets, transfers crown races from one fork to another or prepares new forks for fitting, the Park Tool CRP-2 adjustable crown race puller is the tool that removes the race precisely on rigid and suspension forks, from 1" steering columns up to 1.5". TECHNICAL SPECIFICATIONS GeneralCode: CRP-2Type: adjustable fork crown race pullerReplacement blades: part 1155-3 DimensionsCrown race outside diameter: up to 64 mmSteering column length: 140 to 430 mm (5.5"-17") MaterialsConstruction: all steel CompatibilitySteering column diameter: 1", 1-1/8", 1-1/4", 1.5"Forks: suspension and rigid
-37% sale
PARK TOOL CASSETTE PLIERS PARK TOOL CP-1.2 €43,90 €69,60
The Park Tool CP-1.2 is a cassette pliers designed as an alternative to the classic chain whip: it holds the cog stack still while the lockring is loosened or tightened, both when removing the cassette and when refitting it. It works with one hand, leaving the other free for the lockring tool. The jaws grip the cogs directly, from 9 to 24 teeth, and hold the cassette without having to wrap a chain around the teeth as you do with a chain whip. Long jaws and a long handle provide all the leverage needed even on the most stubborn lockrings. The body is forged steel, the spring-loaded return reopens the pliers after each grip and the dual-density grips give a firm, comfortable hold under load. Where to use the CP-1.2 cassette pliers Cassette removal for cleaning, replacement or gearing changes Cassette refitting and lockring tightening with the cog stack held still 7- to 13-speed cassettes, including SRAM eTap AXS and Shimano XTR 12-speed Single-speed cassettes with a 3/32" cog Everyday bench work, when you need a tool to pick up and use with one hand Why choose the Park Tool CP-1.2 Chain whip alternative: no chain to wrap around the cogs One-handed use thanks to the spring-loaded return Secure grip on cogs from 9 to 24 teeth Forged steel and a 35 cm length for generous leverage Dual-density grips for comfortable work even in long sessions Wide compatibility, from 7-speed drivetrains up to 13-speed For the workshop that removes and refits cassettes every day, as well as for the rider who looks after their own drivetrain, the Park Tool CP-1.2 cassette pliers make the job quicker and tidier than a traditional chain whip, with the strength of forged steel and the convenience of a one-handed tool. TECHNICAL SPECIFICATIONS GeneralCode: CP-1.2Type: cassette pliers, chain whip alternativeUse: one-handed, spring-loaded return DimensionsLength: 35 cm (13.7")Grip: cogs from 9 to 24 teeth MaterialsBody: forged steelGrips: dual-density CompatibilityCassettes: 7- to 13-speed, including SRAM eTap AXS and Shimano XTR 12-speedSingle speed: cassettes with a 3/32" cog
-37% sale
PARK TOOL PROFESSIONAL CHAIN SCRUBBER PARK ... €107,90 €169,00
The Park Tool CM-25 is the professional chain scrubber built for the workshop, the shop-grade version of the classic Park Tool chain cleaner. With the Park Tool CM-25 professional chain scrubber the chain is cleaned right on the bike, without removing it, so drivetrain maintenance becomes a quick job to repeat at every service. A clean chain works better with sprockets and chainrings and is easier to assess during a workshop check. Body and handle are die-cast A380 aluminium: a construction designed for daily use and to last for years under heavy workloads. The CM-25 is also 100% serviceable and rebuildable, so every wear part can be replaced instead of throwing the tool away. Inside, four brushes clean the chain inside and out, while dual-sided sponges and wicking pads hold back solvent as the chain exits and reduce drips on the floor and the bike. How the Park Tool CM-25 professional chain scrubber works Pour solvent into the reservoir, close the body around the chain and turn the pedals. The four brushes clean the chain inside and out, removing dirt and old lubricant. Dual-sided sponges and wicking pads wipe the chain as it exits and limit drips. Once cleaning is done, empty the reservoir, let the chain dry and lubricate it again before riding. The brush and sponge cartridge clicks in and out for quick cleaning or replacement. Why choose the Park Tool CM-25 Die-cast A380 aluminium body and handle, designed for the workshop rather than occasional use. Fully serviceable and rebuildable: an investment that lasts for years. Four-brush system for thorough cleaning of the inside and outside of the chain. Click-in brush cartridge and dedicated spares: RBS-25 brush cartridge and 2336K sponge/pad kit. Specified by Park Tool for multi-speed and single-speed chains. For the mechanic who cleans chains every day and for the demanding rider who wants a shop tool in the garage too, the Park Tool CM-25 professional chain scrubber combines the toughness of metal with the convenience of a click-in cartridge. TECHNICAL SPECIFICATIONS GeneralCode: CM-25Type: professional shop chain scrubberCleaning system: four brushes, dual-sided sponges and wicking padsService: 100% serviceable and rebuildableSpare parts: RBS-25 brush cartridge, 2336K sponge/pad kit MaterialsBody and handle: die-cast A380 aluminium CompatibilityMulti-speed and single-speed chains
-37% sale
PARK TOOL BLADED SPOKE HOLDER PARK TOOL BSH-4 €7,90 €12,40
The Park Tool BSH-4 is the bladed spoke holder that keeps flat aero spokes still while you adjust their tension. It stops the spoke from twisting or binding as you turn the nipple, a key step when truing and building wheels with bladed spokes. An aero spoke that twists during tensioning loses strength and, as it rotates, defeats the aerodynamic profile it was chosen for. The BSH-4 solves the problem with a lightweight, ergonomic body featuring four slots of different widths: choose the one that fits the spoke blade, slip it onto the spoke and keep it aligned while you work the nipple with the spoke wrench. Where to use the BSH-4 spoke holder Truing wheels with flat or aero spokes. Tensioning during the build of new wheels with bladed spokes. Replacing an aero spoke and bringing it up to tension. Checking spoke orientation after adjustment. Why choose Park Tool BSH-4 Four different-size slots for a wide range of bladed spokes. Accepts flat spokes from 0.8 mm to 2.0 mm in width. Prevents spoke twist, preserving strength and aerodynamics. Lightweight, ergonomic design, comfortable in the hand for long sessions. For anyone building or truing deep-section wheels, the Park Tool BSH-4 bladed spoke holder is the natural partner of the spoke wrench: you work precisely and the spokes stay straight, exactly as they should. TECHNICAL SPECIFICATIONS General Code: BSH-4 Type: holder for flat/aero spokes Slots: 4, different sizes Design: lightweight and ergonomic Compatibility Spokes: flat (bladed) spokes from 0.8 mm to 2.0 mm wide
PARK TOOL BIG ROLLING KIT 100 PROFESSIONAL ... €0,00
The Park Tool BRK-1 is the professional rolling tool kit with 100 workshop tools, selected by Park Tool mechanics to adjust, replace, diagnose and repair most bicycle components. It is a complete mobile workshop, ready to go wherever bikes need work. The base of the kit is the BX-3 Rolling Big Blue Box. Opened, it becomes an organised display with double-sided tool pallets, custom loops and pockets where every tool has its place. Closed, it turns into a weather-resistant case with wheels and an extendable handle, ready to travel. Inside are torque tools, hex and Torx wrenches, bottom bracket and crank tools, drivetrain and cassette tools, spoke and cone wrenches, pliers, cutters, screwdrivers and tire and tube accessories. What the BRK-1 rolling kit contains Torque tools: ATD-1.2 adjustable torque driver and TW-5.2 (2–14 Nm) and TW-6.2 (10–60 Nm) click-type torque wrenches. Hex and Torx: HXS-1.2 professional L-shaped set, sliding T-handle wrenches from 2 to 8 mm and T10 to T30, 3-way wrenches. Bottom bracket and crank: 8-, 12- and 16-notch BBT tools, CWP-7 crank puller, CNW-2 chainring nut wrench. Drivetrain: CT-3.3 chain tool, CC-4.2 chain checker, MLP-1.2 master link pliers, DAG-3 hanger alignment gauge, cassette tools and SR-12.2 chain whip, EWS electronic shift tools. Wheels: SW-0, SW-2, SW-3 and SW-6 spoke wrenches, 13 to 19 mm cone wrenches, SBC-1 gauge. Disc brakes, cleaning and more: DT-2.2 rotor truing tool, PS-1 pad spreader, GSC brushes, tire levers, patch kit, tape measure and BO-2 bottle opener. Why choose Park Tool BRK-1 100 professional tools chosen by Park Tool mechanics in a single solution. BX-3 case with wheels and extendable handle, weather-resistant. Opens into a display with double-sided pallets: every tool visible and in its place. Covers adjustment, replacement, diagnosis and repair of most components. Ideal for shops, teams, events and mechanics working on the road. For anyone who wants complete, organised equipment that is always ready to go, the Park Tool BRK-1 professional rolling kit is the Park Tool workshop that follows you everywhere. TECHNICAL SPECIFICATIONS General Code: BRK-1 Type: professional rolling tool kit Number of tools: 100 Case: BX-3 Rolling Big Blue Box with wheels and extendable handle, weather-resistant Note: kit contents subject to change by Park Tool Dimensions BX-3 dimensions: 59.5 x 44 x 23.5 cm (23.4" x 17.3" x 9.3") Weight: 22 kg (48.5 lb) Contents Case: BX-3 Torque tools: ATD-1.2, TW-5.2 (2–14 Nm), TW-6.2 (10–60 Nm) Hex and Torx: AWS-1, AWS-3, HXS-1.2, THH-2, THH-25, THH-3, THH-4, THH-5, THH-6, THH-8, THT-10, THT-20, THT-25, THT-30, TWS-1, TWS-3 Bottom bracket and crank: BBT-10.2, BBT-18, BBT-69.4, BBT-79.3, BBT-RS, CWP-7, CNW-2 Drivetrain, chain and cassette: CC-4.2, CT-3.3, MLP-1.2, DAG-3, DH-1, DSD-2, DSD-4, EWS-1, EWS-2, FR-1.3, FR-5.2H, SR-12.2 Disc brakes: DT-2.2, PS-1 Cleaning brushes: GSC-1, GSC-3, GSC-4 Wheels and spokes: SW-0 (3.23 mm), SW-2 (3.45 mm), SW-3 (3.96 mm), SW-6 (3.7 mm), SBC-1, SCW-13, SCW-15, SCW-17, SCW-19 Metric, adjustable and pedal wrenches: MW-8, MW-9, MW-10, MWF-3, PAW-6, PW-4 Pliers, cutters and screwdrivers: CN-10, EP-1, IR-1.3, LP-7, NP-6, SD-0, SD-3, SPA-2, SZR-1, HMR-8 Tires, tubes and miscellaneous: TL-6.3, VC-1, VP-1C, UP-SET, RR-12.2, BO-2 Sockets and bits: 1650 (10 mm), 1654 (14 mm), 1655 (15 mm), 1663 (3 mm), 1664 (4 mm), 1665 (5 mm), 1666 (6 mm), 1668 (8 mm), 1670 (10 mm, long)
-36% sale
PARK TOOL TIRE BEAD BREAKER PARK TOOL BMT-1 €39,90 €62,31
The Park Tool BMT-1 is a tire bead breaker designed to unseat the tire bead from the rim, especially on the tightest and most stubborn tubeless setups. With this tire bead breaker, removal becomes quick and controlled, saving your thumbs and your patience. The tool features locking jaws that clamp the tire sidewalls and are tightened with a large adjustment knob. Pulling the long handle sideways pushes the bead off the bead seat towards the centre channel of the rim: the tire can then be removed with a tire lever or your preferred method. Non-marring jaw covers protect rim and tire throughout the job. Where to use the BMT-1 bead breaker Tubeless tires with beads tightly seated on the rim. Tires with a width from 23 mm to 78 mm. On the workshop bench, to make tire changes faster and less tiring. In the home garage, for riders who look after their own tubeless wheels. Why choose Park Tool BMT-1 Locking jaws with a large adjustment knob for a secure grip on the tire sidewalls. Long handle pulled sideways to move the bead towards the rim centre channel. Non-marring jaw covers so rim and tire are not marked. Wide compatibility: tires from 23 mm to 78 mm (0.91" to 3"). Leaves you free to choose the final removal method, with a lever or by hand. The Park Tool BMT-1 tire bead breaker is the missing tool for removing the most stubborn tubeless tires quickly and without damaging the rim. TECHNICAL SPECIFICATIONS GeneralCode: BMT-1Type: tire bead breakerAdjustment: locking jaws with knobProtection: non-marring jaw covers CompatibilityTire width: 23 mm to 78 mm (0.91" to 3")Use: tubeless and tight-fitting tires
PARK TOOL BASE MASTER WORKSHOP TOOL KIT 300... €0,00
The Park Tool BMK-17 is the base master workshop tool kit that Park Tool describes as the most comprehensive professional bicycle tool kit available. It brings together more than 300 professional-level hand tools, measuring devices, fixtures, lubricants and accessories: a complete starting point for anyone opening a bike shop or repair business. The BMK-17 includes everything in the MK-17 kit except the frame and fork machining tools and cutters. It is therefore the ideal solution for a workshop that wants to cover every maintenance and assembly job without investing in frame and fork machining. Park Tool updates the kit contents regularly, so they may change over time. What you can do with the BMK-17 workshop kit Everything from basic adjustments to a complete frame-up bike build. Daily maintenance and repair work with professional hand tools. Checks and inspections with the included measuring devices. Lubrication and finishing work with the supplied products and accessories. Setting up a new workshop: just add a repair stand and somewhere to store it all. Why choose Park Tool BMK-17 A single purchase to equip the workshop with more than 300 items selected by Park Tool, without building up the tool set piece by piece. Professional-level tools designed for daily workshop use. Same contents as the MK-17 kit without the frame and fork machining tools: the targeted choice for workshops that do not machine frames. Contents regularly updated by Park Tool. The Park Tool BMK-17 base master workshop tool kit is the complete foundation for a professional workshop. The repair stand is not included and the kit contents are subject to change by Park Tool. TECHNICAL SPECIFICATIONS GeneralCode: BMK-17Type: professional workshop tool kitUse: from basic adjustments to complete bike builds ContentsMore than 300 professional hand tools, measuring devices, fixtures, lubricants and accessoriesEverything in the MK-17 kit except frame and fork machining tools and cuttersRepair stand not includedContents subject to change by Park Tool
-36% sale
PARK TOOL HYDRAULIC BRAKE BLEED KIT MINERAL... €145,90 €227,01
The Park Tool BKM-1.2 is the hydraulic brake bleed kit for mineral oil that brings together everything needed to bleed most mineral oil-based bicycle hydraulic disc brakes, including Shimano, Magura, TRP, Tektro, Trick Stuff, SRAM DB8, Campagnolo, Promax and Clarks. Bleeding removes air bubbles and contaminants from the system, extends component life and restores a crisp, consistent brake feel. The kit is designed for daily commercial use and comes in a rugged case. Alongside syringes, hoses and bleed blocks, it includes a bleed funnel with stopper, a hose with an integrated fitting for Shimano-style bleed nipples and a full set of threaded adapters for the different bleed ports. Every component can be replaced with genuine Park Tool spare parts. How to use the mineral oil brake bleed kit Bleeding levers and calipers on mineral oil systems with two 20 ml syringes and hoses with shutoff clips to control the flow. Funnel with stopper to fit on the lever and hose with integrated fitting for Shimano-style nipples. Dedicated adapters: M4 x 0.7 for SRAM DB8, Trick Stuff and Campagnolo; M5 x 0.8 for Formula Cura, Tektro, Hayes and Nutt; M6 x 0.75 for Magura; M6 x 1.0 for Promax; M7 x 0.75 for Shimano. 10/12 mm universal and 11 mm bleed blocks to keep the pistons in place during the job. Fluid disposal bag for clean, tidy work. Why choose Park Tool BKM-1.2 One kit for the main mineral oil systems, thanks to a wider range of adapters than the DOT kit. Built for the workshop: robust components for heavy use and a rigid case to store everything. Replacement parts available individually, from O-rings to hoses, to keep the kit in top condition. Dedicated exclusively to mineral oil: Park Tool advises never mixing mineral oil and DOT fluid, either in the system or in the tools, because cross-contamination can damage seals and compromise braking. For DOT fluid systems there is the dedicated Park Tool BKD-1.2 kit. The Park Tool BKM-1.2 hydraulic brake bleed kit for mineral oil is the complete choice for working on Shimano, Magura, Tektro and other mineral oil brakes. Brake fluid is not included. TECHNICAL SPECIFICATIONS GeneralCode: BKM-1.2Type: hydraulic disc brake bleed kitFluid: mineral oil only (not included)Case: rigid storage case CompatibilitySystems: most mineral oil hydraulic brakes, including Shimano, Magura, TRP, Tektro, Trick Stuff, SRAM DB8, Campagnolo, Promax and ClarksNot suitable for: DOT fluid systems Contents2 x 20 ml syringes2 x hoses with shutoff clips1 x hose with integrated fitting for Shimano-style bleed nipples1 x open-ended hoseBleed funnel with stopper2 x 10/12 mm universal bleed blocks2 x 11 mm bleed blocks2 x adjustable syringe holdersM4 x 0.7 adapter (SRAM DB8, Trick Stuff, Campagnolo)M5 x 0.8 adapter (Formula Cura, Tektro, Hayes, Nutt)M6 x 0.75 adapter (Magura)2 x M6 x 1.0 universal adaptersM6 x 1.0 adapter (Promax)M7 x 0.75 adapter (Shimano)Universal hose compression sleeveFluid disposal bagSpare O-rings and hose
-36% sale
PARK TOOL HYDRAULIC BRAKE BLEED KIT DOT FLU... €117,90 €184,20
The Park Tool BKD-1.2 is the hydraulic brake bleed kit for DOT fluid, designed to service most DOT fluid-based bicycle hydraulic disc brakes, including SRAM, Formula, Hayes and Hope models. Bleeding removes air bubbles and contaminants from the system, helps components last longer and restores full braking performance. The kit is built for heavy commercial use and comes in a rugged case, so every accessory stays organised and protected between jobs. It contains two 20 ml syringes with hoses fitted with shutoff clips, bleed blocks, adjustable syringe holders and a set of threaded adapters to connect to different levers and calipers. Every component is available as a Park Tool replacement part, so the kit stays in working order even with daily workshop use. How to use the DOT brake bleed kit Bleeding levers and calipers on DOT fluid hydraulic systems, with two syringes to work on both ends of the system. Shutoff clips on the hoses let you control fluid flow and avoid drips when connecting and disconnecting. 10/12 mm universal bleed blocks and 11 mm bleed blocks for Hayes systems keep the pistons in place during the job. Adjustable holders support the syringes and keep your hands free during the most delicate steps. The SRAM Bleeding Edge fitting and the M5 x 0.8 and M6 x 1.0 adapters cover the main bleed ports. Why choose Park Tool BKD-1.2 One kit for most DOT fluid hydraulic brakes, without buying a different kit for each brand. Built for professional workshops: components suited to heavy use and a rigid case to store and carry everything. Replacement parts available individually: hoses, O-rings and syringes can be replaced without changing the whole kit. Dedicated exclusively to DOT fluid: Park Tool advises never mixing DOT fluid and mineral oil, either in the system or in the tools, because cross-contamination can damage seals and compromise braking. For mineral oil systems there is the dedicated Park Tool BKM-1.2 kit. The Park Tool BKD-1.2 hydraulic brake bleed kit for DOT fluid is the right tool for clean, repeatable bleeds on SRAM, Formula, Hayes and Hope brakes, in the workshop or in your home garage. Brake fluid is not included. TECHNICAL SPECIFICATIONS GeneralCode: BKD-1.2Type: hydraulic disc brake bleed kitFluid: DOT fluid only (not included)Case: rigid storage case CompatibilitySystems: most DOT fluid hydraulic brakes, including SRAM, Formula, Hayes and HopeNot suitable for: mineral oil systems Contents2 x 20 ml syringes2 x hoses with shutoff clips2 x 10/12 mm universal bleed blocks2 x 11 mm bleed blocks for Hayes2 x adjustable syringe holders2 x M5 x 0.8 adapters for SRAM2 x M6 x 1.0 universal adapters1 x SRAM Bleeding Edge fitting1 x universal hose compression sleeveSpare O-rings and hose
-37% sale
PARK TOOL BOTTOM BRACKET TOOL RETAINING SYS... €35,90 €56,80
The Park Tool BBT-RS is the bottom bracket tool retaining system that keeps the tool fully engaged in the shallow fittings of the cups, preventing it from slipping during removal or installation. It is the answer to the classic damaged fittings that appear when a tool jumps out under load. The principle is simple: an M8 x 1.0 threaded rod, 175 mm long, passes through the bottom bracket and connects to the tool via a double-sided adapter nut with M12 x 1.0 and M15 x 1.0 threads. A spring with adjustable tension, a 38 mm speed nut and a 57 mm washer press the tool against the cup for the whole job, leaving your hands free to concentrate on the torque being applied. Without having to push the tool against the cup with your other hand, you can work cleanly with a ratchet or torque wrench, even when the notches are shallow or already marked by previous jobs. Which bottom brackets and tools work with the Park Tool BBT-RS Threaded cup, thread-together, cartridge and cup-and-cone bottom brackets Park Tool BBT-27.3, BBT-35-12, BBT-35-36, BBT-47-12, BBT-47-16, BBT-49.3, BBT-59.3, BBT-69.3, BBT-69.4 and BBT-79.3 Wrench-style tools with a handle such as BBT-9, BBT-29 and HCW-4 Tools with external wrench flats such as BBT-19.2 and BBT-22 With the BBT-69.4, removing disc brake rotor lockrings on thru-axle hubs up to 148 mm wide Why choose the Park Tool BBT-RS Adjustable spring tension that keeps the tool fully seated in the notches Reduces the risk of damaging cup notches when the tool slips Double-sided adapter nut for use with a wide range of Park Tool tools Also useful on rotor lockrings of thru-axle hubs, together with the BBT-69.4 Instructions and parts list available as a PDF on the Park Tool website Shallow notches are exactly where an unrestrained tool tends to slip. The Park Tool BBT-RS bottom bracket tool retaining system turns every job into a safe and controlled operation, from the pro workshop bench to the home garage. TECHNICAL SPECIFICATIONS GeneralCode: BBT-RSType: spring-based retaining system for bottom bracket toolsAdjustment: adjustable spring tension DimensionsRod length: 175 mmRod thread: M8 x 1.0Adapter nut threads: M12 x 1.0 and M15 x 1.0Speed nut diameter: 38 mmWasher diameter: 57 mm CompatibilityBottom brackets: threaded cup, thread-together, cartridge, cup-and-conePark Tool tools: BBT-27.3, BBT-35-12, BBT-35-36, BBT-47-12, BBT-47-16, BBT-49.3, BBT-59.3, BBT-69.3, BBT-69.4, BBT-79.3Handle tools: BBT-9, BBT-29, HCW-4Tools with wrench flats: BBT-19.2, BBT-22
-37% sale
PARK TOOL BOTTOM BRACKET AND LOCKRING TOOL ... €21,90 €34,50
The Park Tool BBT-69.4 is an extremely versatile 16-notch bottom bracket tool: it installs and removes external bearing threaded bottom bracket cups from many brands and, with the same fitting, also works on Center Lock disc rotor lockrings and on the lockrings of some Bafang mid-drive motors. It is precision CNC-machined from aluminium, made in-house by Park Tool and anodized for instant identification. The 16 notches have a major diameter of 44-45 mm and a minor diameter of 42.7 mm. The 3/8" square drive lets you use it with a ratchet or torque wrench, so every cup or lockring is tightened to the correct torque. One tool for cups and lockrings means fewer tools on the bench and less time spent looking for the right one, a real advantage in a workshop that works on different bikes every day. Where to use the Park Tool BBT-69.4 bottom bracket tool Shimano BB80, BB5700, XT BB70, BB51 and earlier external bearing threaded bottom bracket cups Threaded cups from Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels and Fulcrum, among others Center Lock disc brake rotor lockrings Bafang BBSH and BBS02 mid-drive motor lockrings Removing rotor lockrings on thru-axle hubs up to 148 mm, together with the BBT-RS retaining system Why choose the Park Tool BBT-69.4 One tool for bottom brackets, Center Lock lockrings and Bafang motor lockrings Precision CNC-machined aluminium, made directly by Park Tool Anodized finish for immediate identification on the tool board Integrated threads for the BBT-RS retaining system (sold separately), whose adjustable spring tension keeps the tool fully engaged and prevents slipping 3/8" drive compatible with ratchets and torque wrenches The tool is not designed for impact drivers or other power tools: use it by hand. For the full list of compatible models, Park Tool refers to its Bottom Bracket Tool Finder. In a pro workshop or a home garage, the Park Tool BBT-69.4 bottom bracket and lockring tool covers a great many drivetrain and brake jobs with a single tool. TECHNICAL SPECIFICATIONS GeneralCode: BBT-69.4Type: 16-notch bottom bracket and lockring toolDrive: 3/8" square for ratchet and torque wrenchUse: hand use only, not suitable for impact drivers or power tools DimensionsNumber of notches: 16Major diameter (outside of notches): 44-45 mmMinor diameter (inside of notches): 42.7 mm MaterialsMaterial: CNC-machined aluminiumFinish: anodized CompatibilityShimano: BB80, BB5700, XT BB70, BB51 and earlier external bearing threaded cupsOther brands: Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum and othersBrakes: Center Lock rotor lockringsE-bike: Bafang BBSH and BBS02 motor lockringsCompatible accessories: BBT-RS (sold separately)
-37% sale
PARK TOOL T47 BOTTOM BRACKET TOOL 12 NOTCH ... €22,90 €36,30
The Park Tool BBT-47-12 is the 12-notch aluminium T47 bottom bracket tool, designed to install and remove T47 threaded bottom brackets and Chris King ThreadFit 30. It is the light, compact version of Park Tool's T47 family: same 50-53 mm 12-notch fitting, but an aluminium body with a single 3/8" square drive, ideal if you always work with a ratchet and torque wrench. It is CNC-machined from solid aluminium in Park Tool's own facility and anodized for instant identification. The notches have a major diameter of 50-53 mm and a minor diameter of 48.2 mm, for full engagement on the large-diameter cups typical of the T47 standard. Compared with the BBT-147-12, which is machined from 4140 steel and also offers a 1" hex and 36 mm flats for very tight cups, the BBT-47-12 focuses on lightness and precise torque: it is the right choice for installation and routine service, while the steel version is designed for the toughest removals. Which T47 bottom brackets the BBT-47-12 fits BBInfinite T47, external non-drive side and internal version Chris King ThreadFit 30 and ThreadFit T47 (30i, 24i, 30x, 24x) Hambini T47 Rotor T47 External 30 mm and T47 Internal 30 mm Rotor thread-together bottom brackets for BB30, PF30, BB386EVO and BBright (non-drive side) Why choose Park Tool BBT-47-12 Precise 12-notch profile that won't mark aluminium cups CNC-machined aluminium: light and easy to handle 3/8" drive for ratchet and torque wrench, to tighten to the correct torque Anodized finish to tell it apart from other BBT tools at a glance Works with the BBT-RS retaining system, sold separately, which keeps the tool engaged with the cup The tool is not designed for impact drivers or other power tools. For anyone who regularly builds and services T47 road, gravel and MTB frames, the Park Tool BBT-47-12 aluminium 12-notch T47 bottom bracket tool is a precise, lightweight tool to keep within reach. TECHNICAL SPECIFICATIONS GeneralCode: BBT-47-12Brand: Park ToolTool fitting: 12 notchesDrive: 3/8" square (ratchet and torque wrench)Power tools and impact drivers: not compatible DimensionsMajor diameter (outside of notches): 50-53 mmMinor diameter (inside of notches): 48.2 mm MaterialsBody: CNC-machined aluminium, anodized CompatibilityBottom brackets: BBInfinite T47, Chris King ThreadFit 30 / T47 (30i, 24i, 30x, 24x), Hambini T47, Rotor T47 External and Internal 30 mm, Rotor thread-together BB30 / PF30 / BB386EVO / BBrightAccessories: BBT-RS retaining system (sold separately)
-40% sale
PARK TOOL CAMPAGNOLO BOTTOM BRACKET TOOL 6 ... €10,90 €18,00
The Park Tool BBT-4 is the 6-notch bottom bracket tool with integrated handle, designed to install and remove the cups of older-generation Campagnolo cartridge bottom brackets. It is the tool you need when a classic or vintage road bike with a sealed bottom bracket and six-notch cups comes into the workshop. The tool fitting has a nominal major diameter of 44 mm and a minor diameter of 38 mm, matching the SC-S and AC-H cartridge cups fitted to several Campagnolo groupsets. Unlike socket-type tools, the BBT-4 needs no ratchet: the vinyl-coated handle offers a comfortable grip and the leverage needed to break the cup loose or seat it during installation. Where to use the 6-notch Campagnolo bottom bracket tool SC-S and AC-H cartridge cups of sealed bottom brackets Campagnolo Veloce, Xenon, Mirage, Daytona and Avanti groupsets Service and restoration of road bikes with Campagnolo cartridge bottom brackets Bottom bracket replacement and shell cleaning Why choose Park Tool BBT-4 Dedicated 6-notch profile that avoids forcing cups with makeshift tools Integrated handle: ready to use without a ratchet or sockets Vinyl-coated grip for comfortable work Compatible with the BBT-RS retaining system, sold separately, to keep the tool in place For anyone working on Campagnolo bikes with cartridge bottom brackets, the Park Tool BBT-4 6-notch Campagnolo bottom bracket tool is a simple, focused tool that does one precise job. TECHNICAL SPECIFICATIONS GeneralCode: BBT-4Brand: Park ToolTool fitting: 6 notchesHandle: integrated, vinyl-coated DimensionsMajor diameter (outside of notches): 44 mm (nominal)Minor diameter (inside of notches): 38 mm CompatibilityCups: SC-S and AC-H cartridge cupsGroupsets: Campagnolo Veloce, Xenon, Mirage, Daytona, AvantiAccessories: BBT-RS retaining system (sold separately)