FOX

FOX OD GRIP SPRING INSULATOR SLEEVE Fork OD GripPart spring insulator sleeve. ITEM CODE 231-00-026

FOX OIL FOR SHOCK AND FORK 20 WT GOLD 1 LITER Oil for maintenance of forks and shock absorbers with FIT cartridge. Stanchion lubrication NO OPEN BATH. It allows you to minimize friction between the seals and increase performance. 1 liter. ITEM CODE 60X02503072

R3 5WT OIL FOR fox FLOAT X2 DHX2 SHOCK ABSORBERS UP TO 2020 AND FIT4 2016/2017 CARTRIDGES 1 LITER Oil that allows you to minimize friction between the seals and increase performance. Capacity: 1 liter. ITEM CODE 60X02506007

FOX SPACER KIT FOR 15QR AXLE FOR 36 AND 38 FORKS FROM 2021 Service spacer kit for 15QR axle for 36 and 38 forks from 2021. ITEM CODE 60X80301548

FOX FLOAT DPX2 2024 SHOCK SEAL KIT Seal kit for Fox DPX2 2024 shock, oil side, created for the maintenance of Fox DPX2 2024 shocks. ITEM CODE 60X80304011

FOX SLS Shock Spring 450lb 67mm Stroke The FOX SLS (Super Light Steel) is a rear shock spring designed to offer the perfect balance of lightness, sensitivity, and structural strength. Ideal for enduro, downhill, and gravity use, it represents a premium solution for demanding riders. Made from high-performance steel with SLS technology, this spring significantly reduces weight compared to traditional springs while maintaining high reliability and durability. Main Features Spring Rate: 450 lb Stroke: 67 mm (2.65”) Technology: FOX SLS – Super Light Steel Lightweight structure with high fatigue resistance High sensitivity on small bumps Wear and corrosion resistant finish Advantages Reduced overall suspension system weight Increased shock responsiveness and sensitivity Consistent performance even in extreme conditions Superior durability compared to traditional steel springs Compatibility Compatible with FOX DHX, FOX DHX2 shocks, and other models that support a 67mm stroke. Final Description The FOX SLS 450lb is the ideal choice for those seeking maximum control, lightness, and performance on technical and high-intensity trails.

The FOX DHX2 Factory Coil 205x60 mm Trunnion is a high-end rear shock designed for Enduro and Downhill MTBs. It offers maximum sensitivity, advanced control, and consistent traction even on the most technical and challenging terrains. Thanks to Monotube Factory Series technology, it ensures an extremely fluid and precise response, ideal for demanding riders and high-performance racing. FOX DHX2 Factory Coil Shock – Racing-Level MTB Performance High-performance Enduro / Downhill MTB shock FOX Factory Series technology with Kashima Coat Monotube structure for maximum sensitivity and smoothness High / Low Speed compression adjustment High / Low Speed rebound adjustment 2-position climb switch lever (Open / Firm) Maximum traction on technical terrains and fast descents Technical Specifications Type: Coil rear shock Mount: Trunnion Eye-to-eye: 205 mm Stroke: 60 mm Series: FOX Factory Use: Enduro / Downhill / Gravity MTB Finish: Kashima Coat Compatibility and Use Ideal for modern enduro and downhill racing mountain bikes, the FOX DHX2 Factory Coil offers a more natural ride feel compared to air shocks, providing greater grip, stability, and control on technical and challenging trails. ⚠️ Important THE PRODUCT IS SOLD WITHOUT SPRING The spring is not included and must be purchased separately based on rider weight and frame setup. Why choose FOX DHX2 Factory Coil Maximum sensitivity to small and large impacts Complete adjustments for personalized setup Ideal for aggressive riding and Enduro / Downhill races Top-of-the-line FOX Factory Series quality

The Fox 38 Float Factory 29” with 170 mm of travel is a benchmark fork for enduro riding, designed to deliver maximum stiffness, control, and performance on the most demanding terrain. The Kashima coating enhances smoothness, while the GRIP X2 damper provides full adjustment options for a precise setup. Robust, sensitive, and highly tunable, it is the ideal choice for demanding riders seeking the highest levels of reliability and performance. FOX FLOAT 38 FS 29 GRIP X2 170 MM 15X110 1.5T RAKE 44 MM KEY FEATURES: Series: Factory Steerer: Standard Wheel size: 29 inches Travel: 170 mm Stanchions: 38 mm with Kashima coating Offset: 44 mm Rotor size: 200 mm Direct Post Mount, compatible up to 230 mm Bleed valves: Yes Fender mount: FOX 36/38 optional fender with robust 4-point direct mount system Air spring: FLOAT EVOL GlideCore Weight: 2360 g (29, F-S, 180, Grip X2, Kabolt X) Damper: GRIP X2 (fully adjustable)

Power and style merge in the Fox Racing Shox 38 K 29" fork! With 170mm of travel and an exclusive green finish, it offers exceptional performance in enduro. Don't miss out on this unique gem.The Fox Racing Shox 38 K 29" Factory Series 170mm Grip X2 fork is a limited edition in green with Kashima stanchions, 170mm of travel, and a GRIP X2 damper. Stiffness, exclusivity, and total adjustability for enduro. The golden Kashima finish on the stanchions and the exclusive green color of this limited series make it a unique piece, both aesthetically and in terms of performance. FOX RACING SHOX 38 K 29 FACTORY SERIES 170 MM GRIP X2 FORK KEY FEATURES: Usage: Enduro Wheel size: 29″ Travel: 170 mm Damper: GRIP X2, with independent high and low-speed compression and rebound adjustment Spring: FLOAT EVOL air spring Stanchion diameter: 38 mm for maximum stiffness Offset: 44 mm Front axle: Kabolt-X with floating axle design Brake mount: Post Mount (minimum 180 mm, up to 230 mm) Approximate weight: 2,180-2,200 g Color: Exclusive limited edition green with Kashima Coat stanchions

Standard black springs for FOX rear shocks are available in many different versions in terms of spring rate, stroke, and overall length. Each extremely durable, powder-coated shock spring is labeled with its spring rate and total stroke. According to the manufacturer, the basic rule for proper selection is that the shock travel must be less than the stroke specified on the spring itself. FOX SHOCK SPRING 400LB 2.450 STROKE BLACK – KEY FEATURES: Spring stroke: 3.64" – 3.85" (92 – 98 mm) Inner diameter: 1.385" (approx. 35 mm) Compatible shocks: Imperial: 10.50" x 3.50" (267 x 89 mm)(installation length x shock stroke)

- Shock spring 4.733 TLG x 1.385 ID x 500 lbs/in x 2.350 travel, black- Compatible with shocks with 50-55mm travel / 7.875 x 2.25"

The legend of Downhill Frozen on the highest step of the podium and developed in the crucible of World Cup competitions, the 40 is the ultimate DH race fork. The GRIP X2 damper now offers even more tuning and traction than before, ensuring that the 40 stays firmly in its place. Grip x2Top-level downhill performance with increased traction and even greater control at speed. The most adjustable, stiffest and smoothest damper created by fox for descents. Floating axleThe 40’s floating thru-axle allows perfect frame alignment, reducing friction between the upper and lower fork legs and ensuring much smoother suspension movement. Lower leg bleeders and bypass channelsPush-button pressure equalization (bleeders) and increased volume to alleviate the pressure ramp (bypass channels) improve sensitivity and responsiveness on small bumps. FOX 40 FLOAT FACTORY GRIP X2 20X110 BOOST 29 RAKE 52MM 11/8 203MM FORK KEY FEATURES: Chassis: Standard Wheel size: 29" Travel: 203 mm Damper: Grip X2 Damper controls: HSC - LSC - HSR - LSR Axle: 20TAx110 Rake: 52 mm Steerer: 1.125 tapered Upper tube finish: Kashima Air channels: Yes Bleeders: Yes Floating axle: Yes Rotor size: 203 Direct Post Mount, compatible up to 230 Mudguard mounting: Optional FOX 40 mudguard with robust 4-point direct mount Air spring Actual weight: 2867 g (40, 29, F-S, 200, Grip X2, Kabolt) Damping: Grip X2 Travel: 203 mm Stanchion diameter: 40 mm Stanchion material: Aluminum Mount: Post mount Headset diameter: 1" 1/8 (28.6 mm) Spring: Float Lower leg material: Magnesium Version: 20 mm thru-axle Crown material: Forged aluminum Offset: 52 mm Wheel size: 29"

FOX FLOAT X DPX2 AIR VOLUME TUNING KIT MAIN FEATURES: - Adjusts the compression curve and resistance - Compatible with fox racing shox Float cx / DPX2 - Ideal solution to optimize performance and modify the shock absorber, adapting it to your riding style

FOX SHOCK OVERHAUL KIT ARIA SECTION Kit for overhauling the aria section of Fox Float shocks. Compatible with all models from the year 2000 onwards. The kit includes: Quad rings. Dust wiper. 2 O-rings. Travel indicator O-ring. ITEM CODE 60X80300142

FOX 12 VOLUME SPACER FOR FLOAT DPS EVOL FROM 2018 Red 12 volume spacer for Float DPS EVOL from 2018. ITEM CODE 60X23300321

FOX BRAKE HOSE BRACKET FOR LIGHT FORK Brake hose bracket for light fork. ITEM CODE 60X82000202KIT

FOX FLOAT X2 DHX2 SHOCK BODY CLAMP TOOL KIT 2026 Original FOX Body clamp set Tools: Clamps, 2026, Float X2/DHX2, Shock body

FOX SEALS FOR 36 FLOAT FORK Seals for 36 Float NA fork 2015-2017. ITEM CODE 60X80300588

FOX DPS CTD SHOCK OIL SEAL KIT Seal kit for FOX DPS CTD shock oil section, created for the maintenance of FOX DPS shocks. ITEM CODE 60X80300816

FRONT AXLE CLOSURE NUT FOX 15QR Axle adjustments with numbered nut for 15QR and Kabolt axle up to 2020. ITEM CODE 60X80300370

FOX 2023 FLOAT 38 27.5 F-S 170 GRIP2 HSC/LSC ORNG 15QRX110 R44 FORK The FOX 2023 FLOAT 38 27.5 F-S 170 GRIP2 HSC/LSC ORNG 15QRX110 R44 is the long-travel Enduro specialist. Thanks to 170 mm travel and the same revolutionary features as the 36, the 38 redefines the characteristics of a long-travel single-crown fork and sets a new benchmark in terms of safety, performance, and durability.The floating axles on this fork offer a clear performance advantage thanks to their unica ability to far match the exact width of the fork’s wheel mounting surface with the spacing of the front hub flange, thus creating a perfetto frame alignment and eliminating unwanted friction between the upper and lower legs of the fork. Floating axles ensure a much smoother suspension movement along the entire travel of the fork, greatly improving sensitivity and overall ride quality.The fork is equipped with a new patent-pending quick-release lever floating axle system that combines the benefits of a floating axle with the ease of a tool-free quick release. With this system, the spacing is locked by a floating sleeve, allowing you to repeatedly remove and reinstall the front wheel while maintaining perfetto fork alignment. The positioning of the floating sleeve is factory pre-set, so if you’re not sure how to use the floating axle system or simply don’t want to deal with it, you can just install the front wheel and continue your ride. When the fork compresses, the aria volume inside the lower legs decreases, increasing aria pressure. The more the fork compresses, the more pressure increases. This effect can have the undesired consequence of preventing full travel from being reached. Fox canali help alleviate this problem by drastically increasing the aria volume inside the lower legs, thus reducing the amount of unwanted additional pressure ramping.Oil circulates in the upper part of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends throughout its stroke. The bleed ports, positioned on the lower part of the legs, allow atmospheric pressure to be equalized with the simple press of a button. Pressure build-up in the lower legs drastically reduces fork performance, preventing maximum travel from being reached and decreasing sensitivity and responsiveness on small bumps. The design of the lower part of the fork has been engineered to reduce every possible gram without compromising the stiffness and strength required by modern enduro and gravity bikes. The arco design has been engineered to match perfectly with modern Enduro and Downhill bikes. Head tube profiles have become increasingly larger and fork offsets increasingly shorter. The new forma of the arco accounts for this need, protruding forward to provide ample spazio for the head tube at maximum compression. The GRIP2 damper is easy to adjust and offers ultra-precise ride control. The patented Variable Valve Control (VVC) technology allows simple and easy external adjustment with a simple turn of a knob. EVOL technology increases the negative aria spring volume, optimizing small-bump sensitivity. The linear EVOL spring curve offers greater initial suppleness, more mid-stroke support, and a more tunable end-stroke progression. The benefits of EVOL are further underscored by the new fork bleed canali that work to reduce trapped aria pressure in the lower legs, allowing the EVOL aria spring to operate freely without unwanted interference. FOX 2023 FLOAT 38 27.5 F-S 170 GRIP2 HSC/LSC ORNG 15QRX110 R44 FORK KEY FEATURES: Wheel size: 27.5. Travel: 180 mm. Rake: 44. Axle: 15QR x 110. Upper finish: Kashima Coat. Canali aria: yes. Bleeders: yes. Brake rotor size: from 180 to 230 pm. Air spring: Float Evol. Steerer: 1.5 fully elliptical tapered. Weight (approx.): 2180 g. ITEM CODE 910-20-201

FOX 41 VOLUME SPACER FOR FLOAT DPS EVOL SINCE 2018 Volume spacer 41 for Float DPS EVOL since 2018 verde. ITEM CODE 60X23300323

FOX TRANSFER F-S 30.9 175 DROP INTERNAL SEATPOST The FOX TRANSFER F-S 30.9 175 DROP INTERNAL SEATPOST has been completely redesigned and compared to the previous version it is even lighter, stronger and more compact. The Kashima coating offers high wear protection. FOX TRANSFER F-S 30.9 175 DROP INTERNAL SEATPOST MAIN FEATURES: Diameter: 30.9. Size: 175 mm. Internal routing. Black anodized lower coating. Kashima Coat upper coating. 25 g lighter than the 2020 Transfer. Overall length and insertion depth reduced: 175 mm, 30.6 mm shorter than the 2020 Transfer, 8.6 mm reduction in insertion depth. ITEM CODE 60X92501148

SKF KIT EXTERNAL SEALS FOR 32 MM STANCHIONS Kit for external seals for 32mm stanchions to keep the fork in perfect condition. Low friction. ITEM CODE 60X80300944